! Started logfile: /vlbi/uf001/uva//J0608-2717_S_dfm.log on Sun Jan 13 22:51:34 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0608-2717_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0608-2717_S_uva.fits ! AN table 1: 19 integrations on 28 of 28 possible baselines. ! AN table 2: 19 integrations on 21 of 21 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0608-2717 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 2793 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0608-2717_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.014079Jy sigma=16.692876 ! Fit after self-cal, rms=0.908139Jy sigma=14.976516 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.57 mas, bmaj=7.73 mas, bpa=0.5778 degrees ! Estimated noise=1.19879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0675545 Jy ! Component: 100 - total flux cleaned = 0.0871221 Jy ! Total flux subtracted in 100 components = 0.0871221 Jy ! Clean residual min=-0.007811 max=0.012448 Jy/beam ! Clean residual mean=-0.000026 rms=0.002213 Jy/beam ! Combined flux in latest and established models = 0.0871221 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0871221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.090914Jy sigma=1.326253 ! Fit after self-cal, rms=0.090737Jy sigma=1.324369 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=9.113 mas, bpa=0.1395 degrees ! Estimated noise=0.841986 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181184 Jy ! Component: 100 - total flux cleaned = 0.0282475 Jy ! Component: 150 - total flux cleaned = 0.0344791 Jy ! Component: 200 - total flux cleaned = 0.0384107 Jy ! Total flux subtracted in 200 components = 0.0384107 Jy ! Clean residual min=-0.006096 max=0.005691 Jy/beam ! Clean residual mean=-0.000037 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 0.125533 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 60 components and 0.125533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086733Jy sigma=1.258395 ! Fit after self-cal, rms=0.086427Jy sigma=1.254175 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.055 x 9.113 at 0.1395 degrees (North through East) ! Clean map min=-0.0058079 max=0.088017 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 HN 1.20 KP 1.02 LA 0.86 ! NL 1.04 OV 1.05 PT 0.93 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! KP 1.07 LA 0.93 MK 0.87 NL 1.11 ! OV 1.13 PT 0.90 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 HN 1.25 KP 0.96 LA 0.97 ! NL 0.97 OV 0.98 PT 0.95 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! KP 1.04 LA 0.87 MK 1.02 NL 1.11 ! OV 1.00 PT 1.03 SC 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 HN 1.00 KP 0.89 LA 0.98 ! NL 1.08 OV 0.99 PT 1.02 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! KP 1.06 LA 1.00 MK 0.92 NL 1.21 ! OV 1.11 PT 0.92 SC 1.06 ! ! ! Fit before self-cal, rms=0.086427Jy sigma=1.254175 ! Fit after self-cal, rms=0.084152Jy sigma=1.240197 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=9.143 mas, bpa=-0.04356 degrees ! Estimated noise=0.832876 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011511 Jy ! Component: 100 - total flux cleaned = 0.000886411 Jy ! Component: 150 - total flux cleaned = 0.000796983 Jy ! Component: 200 - total flux cleaned = 0.00067881 Jy ! Total flux subtracted in 200 components = 0.00067881 Jy ! Clean residual min=-0.005704 max=0.004093 Jy/beam ! Clean residual mean=-0.000007 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.126212 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.126212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.084071Jy sigma=1.238972 ! Fit after self-cal, rms=0.084103Jy sigma=1.238259 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.084103Jy sigma=1.238259 ! Fit after self-cal, rms=0.083862Jy sigma=1.238113 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=9.117 mas, bpa=-0.1506 degrees ! Estimated noise=0.830062 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633509 Jy ! Component: 100 - total flux cleaned = 0.000486597 Jy ! Component: 150 - total flux cleaned = 0.000423518 Jy ! Component: 200 - total flux cleaned = 0.000339573 Jy ! Total flux subtracted in 200 components = 0.000339573 Jy ! Clean residual min=-0.005642 max=0.004017 Jy/beam ! Clean residual mean=-0.000006 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.126551 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 0.126551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083827Jy sigma=1.237641 ! Fit after self-cal, rms=0.083816Jy sigma=1.237578 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237567 Jy ! Component: 100 - total flux cleaned = 0.000185201 Jy ! Component: 150 - total flux cleaned = 0.000136754 Jy ! Component: 200 - total flux cleaned = 7.11206e-05 Jy ! Total flux subtracted in 200 components = 7.11206e-05 Jy ! Clean residual min=-0.005618 max=0.004035 Jy/beam ! Clean residual mean=-0.000006 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.126622 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 0.126622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083798Jy sigma=1.237382 ! Fit after self-cal, rms=0.083794Jy sigma=1.237360 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083794Jy sigma=1.237360 ! Fit after self-cal, rms=0.083575Jy sigma=1.237288 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=9.099 mas, bpa=-0.2431 degrees ! Estimated noise=0.828664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342572 Jy ! Component: 100 - total flux cleaned = 0.000275423 Jy ! Component: 150 - total flux cleaned = 0.00023662 Jy ! Component: 200 - total flux cleaned = 0.000201233 Jy ! Total flux subtracted in 200 components = 0.000201233 Jy ! Clean residual min=-0.005565 max=0.004006 Jy/beam ! Clean residual mean=-0.000005 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.126823 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 99 components and 0.126824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083561Jy sigma=1.237146 ! Fit after self-cal, rms=0.083555Jy sigma=1.237124 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142553 Jy ! Component: 100 - total flux cleaned = 0.000107271 Jy ! Component: 150 - total flux cleaned = 7.54047e-05 Jy ! Component: 200 - total flux cleaned = 4.57895e-05 Jy ! Total flux subtracted in 200 components = 4.57895e-05 Jy ! Clean residual min=-0.005543 max=0.004019 Jy/beam ! Clean residual mean=-0.000005 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.126869 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 104 components and 0.126869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083547Jy sigma=1.237054 ! Fit after self-cal, rms=0.083546Jy sigma=1.237043 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083546Jy sigma=1.237043 ! Fit after self-cal, rms=0.083424Jy sigma=1.237011 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.564 mas, bmaj=19.88 mas, bpa=-4.502 degrees ! Estimated noise=1.10625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000624522 Jy ! Component: 100 - total flux cleaned = 0.000621552 Jy ! Component: 150 - total flux cleaned = 0.000616578 Jy ! Component: 200 - total flux cleaned = 0.000614594 Jy ! Total flux subtracted in 200 components = 0.000614594 Jy ! Clean residual min=-0.004125 max=0.004617 Jy/beam ! Clean residual mean=-0.000010 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.127484 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 114 components and 0.127484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083425Jy sigma=1.237080 ! Fit after self-cal, rms=0.083422Jy sigma=1.237039 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000254582 Jy ! Component: 100 - total flux cleaned = 0.000255227 Jy ! Component: 150 - total flux cleaned = 0.000254283 Jy ! Component: 200 - total flux cleaned = 0.000254941 Jy ! Total flux subtracted in 200 components = 0.000254941 Jy ! Clean residual min=-0.004153 max=0.004621 Jy/beam ! Clean residual mean=-0.000009 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.127739 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 119 components and 0.127739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083428Jy sigma=1.237164 ! Fit after self-cal, rms=0.083428Jy sigma=1.237149 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=9.087 mas, bpa=-0.2931 degrees ! Estimated noise=0.827875 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.024 x 9.087 at -0.2931 degrees (North through East) ! Clean map min=-0.005264 max=0.085778 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.536 mas, bmaj=7.699 mas, bpa=-0.1084 degrees ! Estimated noise=1.1814 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.065958 Jy ! Component: 100 - total flux cleaned = 0.0869909 Jy ! Component: 150 - total flux cleaned = 0.0999732 Jy ! Component: 200 - total flux cleaned = 0.108566 Jy ! Total flux subtracted in 200 components = 0.108566 Jy ! Clean residual min=-0.006431 max=0.005247 Jy/beam ! Clean residual mean=-0.000009 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 0.108566 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.108566 Jy ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=9.087 mas, bpa=-0.2931 degrees ! Estimated noise=0.827875 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00843623 Jy ! Component: 100 - total flux cleaned = 0.0131782 Jy ! Component: 150 - total flux cleaned = 0.0158725 Jy ! Component: 200 - total flux cleaned = 0.0166005 Jy ! Total flux subtracted in 200 components = 0.0166005 Jy ! Clean residual min=-0.005720 max=0.003875 Jy/beam ! Clean residual mean=-0.000008 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.125166 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 68 components and 0.125166 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.564 mas, bmaj=19.88 mas, bpa=-4.502 degrees ! Estimated noise=1.10625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169318 Jy ! Component: 100 - total flux cleaned = 0.00199909 Jy ! Component: 150 - total flux cleaned = 0.00204761 Jy ! Component: 200 - total flux cleaned = 0.00204636 Jy ! Total flux subtracted in 200 components = 0.00204636 Jy ! Clean residual min=-0.004198 max=0.004654 Jy/beam ! Clean residual mean=-0.000011 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 0.127213 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.18064e-05 Jy ! Component: 100 - total flux cleaned = 4.22212e-05 Jy ! Component: 150 - total flux cleaned = 6.16413e-05 Jy ! Component: 200 - total flux cleaned = 6.14038e-05 Jy ! Total flux subtracted in 200 components = 6.14038e-05 Jy ! Clean residual min=-0.004183 max=0.004655 Jy/beam ! Clean residual mean=-0.000011 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.127274 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 0.127274 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=9.087 mas, bpa=-0.2931 degrees ! Estimated noise=0.827875 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000629704 Jy ! Component: 100 - total flux cleaned = -0.000713752 Jy ! Component: 150 - total flux cleaned = -0.000714589 Jy ! Component: 200 - total flux cleaned = -0.000685208 Jy ! Total flux subtracted in 200 components = -0.000685208 Jy ! Clean residual min=-0.005683 max=0.004022 Jy/beam ! Clean residual mean=-0.000006 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.126589 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 103 components and 0.126589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.083466Jy sigma=1.237389 ! Fit after self-cal, rms=0.083445Jy sigma=1.237228 wmodel J0608-2717_S_map.mod ! Writing 103 model components to file: J0608-2717_S_map.mod wobs J0608-2717_S_uvs.fits ! Writing UV FITS file: J0608-2717_S_uvs.fits wwins J0608-2717_S_map.win ! wwins: Wrote 2 windows to J0608-2717_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016398 Jy ! Component: 100 - total flux cleaned = -0.00123286 Jy ! Component: 150 - total flux cleaned = -0.0011659 Jy ! Component: 200 - total flux cleaned = -0.00110744 Jy ! Component: 250 - total flux cleaned = -0.0014681 Jy ! Component: 300 - total flux cleaned = -0.00161449 Jy ! Component: 350 - total flux cleaned = -0.00179898 Jy ! Component: 400 - total flux cleaned = -0.00197489 Jy ! Component: 450 - total flux cleaned = -0.00218663 Jy ! Component: 500 - total flux cleaned = -0.00243219 Jy ! Component: 550 - total flux cleaned = -0.00255015 Jy ! Component: 600 - total flux cleaned = -0.00270341 Jy ! Component: 650 - total flux cleaned = -0.00288902 Jy ! Component: 700 - total flux cleaned = -0.00303337 Jy ! Component: 750 - total flux cleaned = -0.00320989 Jy ! Component: 800 - total flux cleaned = -0.00341594 Jy ! Component: 850 - total flux cleaned = -0.00358304 Jy ! Component: 900 - total flux cleaned = -0.00371345 Jy ! Component: 950 - total flux cleaned = -0.00371327 Jy ! Component: 1000 - total flux cleaned = -0.00380689 Jy ! Component: 1050 - total flux cleaned = -0.00374594 Jy ! Component: 1100 - total flux cleaned = -0.0036871 Jy ! Component: 1150 - total flux cleaned = -0.00365811 Jy ! Component: 1200 - total flux cleaned = -0.00360057 Jy ! Component: 1250 - total flux cleaned = -0.0035157 Jy ! Component: 1300 - total flux cleaned = -0.0034603 Jy ! Component: 1350 - total flux cleaned = -0.00343286 Jy ! Component: 1400 - total flux cleaned = -0.00335283 Jy ! Component: 1450 - total flux cleaned = -0.00327479 Jy ! Component: 1500 - total flux cleaned = -0.00319814 Jy ! Component: 1550 - total flux cleaned = -0.00312278 Jy ! Component: 1600 - total flux cleaned = -0.0030979 Jy ! Component: 1650 - total flux cleaned = -0.00297614 Jy ! Component: 1700 - total flux cleaned = -0.00292854 Jy ! Component: 1750 - total flux cleaned = -0.00288144 Jy ! Component: 1800 - total flux cleaned = -0.00271837 Jy ! Component: 1850 - total flux cleaned = -0.00262702 Jy ! Component: 1900 - total flux cleaned = -0.00246901 Jy ! Component: 1950 - total flux cleaned = -0.00231309 Jy ! Component: 2000 - total flux cleaned = -0.00211551 Jy ! Component: 2050 - total flux cleaned = -0.00198548 Jy ! Component: 2100 - total flux cleaned = -0.00185703 Jy ! Component: 2150 - total flux cleaned = -0.00168902 Jy ! Component: 2200 - total flux cleaned = -0.00168897 Jy ! Component: 2250 - total flux cleaned = -0.0015655 Jy ! Component: 2300 - total flux cleaned = -0.00148435 Jy ! Component: 2350 - total flux cleaned = -0.00136439 Jy ! Component: 2400 - total flux cleaned = -0.0013446 Jy ! Component: 2450 - total flux cleaned = -0.00122725 Jy ! Component: 2500 - total flux cleaned = -0.00118844 Jy ! Component: 2550 - total flux cleaned = -0.00107389 Jy ! Component: 2600 - total flux cleaned = -0.00107396 Jy ! Component: 2650 - total flux cleaned = -0.00105506 Jy ! Component: 2700 - total flux cleaned = -0.0010366 Jy ! Component: 2750 - total flux cleaned = -0.000963355 Jy ! Component: 2800 - total flux cleaned = -0.000872614 Jy ! Component: 2850 - total flux cleaned = -0.00080086 Jy ! Component: 2900 - total flux cleaned = -0.000765218 Jy ! Component: 2950 - total flux cleaned = -0.000677035 Jy ! Component: 3000 - total flux cleaned = -0.000607015 Jy ! Component: 3050 - total flux cleaned = -0.000572416 Jy ! Component: 3100 - total flux cleaned = -0.000606873 Jy ! Component: 3150 - total flux cleaned = -0.000521631 Jy ! Component: 3200 - total flux cleaned = -0.000538722 Jy ! Component: 3250 - total flux cleaned = -0.000522015 Jy ! Component: 3300 - total flux cleaned = -0.000505126 Jy ! Component: 3350 - total flux cleaned = -0.000455475 Jy ! Component: 3400 - total flux cleaned = -0.000422569 Jy ! Component: 3450 - total flux cleaned = -0.000406427 Jy ! Component: 3500 - total flux cleaned = -0.000406487 Jy ! Component: 3550 - total flux cleaned = -0.000390359 Jy ! Component: 3600 - total flux cleaned = -0.000278786 Jy ! Component: 3650 - total flux cleaned = -0.000247129 Jy ! Component: 3700 - total flux cleaned = -0.000231389 Jy ! Component: 3750 - total flux cleaned = -0.000200083 Jy ! Component: 3800 - total flux cleaned = -0.000200054 Jy ! Component: 3850 - total flux cleaned = -0.00018449 Jy ! Component: 3900 - total flux cleaned = -0.00018436 Jy ! Component: 3950 - total flux cleaned = -0.000138446 Jy ! Component: 4000 - total flux cleaned = -0.000138499 Jy ! Component: 4050 - total flux cleaned = -0.000153735 Jy ! Total flux subtracted in 4096 components = -0.000153841 Jy ! Clean residual min=-0.001145 max=0.000994 Jy/beam ! Clean residual mean=0.000002 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.126435 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 403 components and 0.126435 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0608-2717_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.024 x 9.087 at -0.2931 degrees (North through East) ! Clean map min=-0.0037269 max=0.085204 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0608-2717_S_map.fits wmodel /vlbi/uf001/uva//J0608-2717_S_map.mod ! Writing 403 model components to file: /vlbi/uf001/uva//J0608-2717_S_map.mod wobs /vlbi/uf001/uva//J0608-2717_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0608-2717_S_uvs.fits wwins /vlbi/uf001/uva//J0608-2717_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0608-2717_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0852038 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00026486 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.932566 0.932566 1.86513 3.73026 7.46052 14.921 29.8421 59.6842 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.085 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 321.693 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0608-2717_S_dfm.log closed on Sun Jan 13 22:51:38 2019