! Started logfile: /vlbi/uf001/uva//J0605-3522_X_dfm.log on Sun Jan 13 22:50:30 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0605-3522_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0605-3522_X_uva.fits
! AN table 1: 73 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.855186 visibilities/baseline/integration-bin.
! Found source: J0605-3522
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 15732 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0605-3522_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005664Jy  sigma=18.401690
! Fit after  self-cal, rms=0.913046Jy  sigma=16.562471
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.456 mas, bmaj=11.47 mas, bpa=-7.208 degrees
! Estimated noise=0.861148 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0690455 Jy
! Component: 100  -  total flux cleaned = 0.0877057 Jy
! Total flux subtracted in 100 components = 0.0877057 Jy
! Clean residual min=-0.005243 max=0.008331 Jy/beam
! Clean residual mean=-0.000007 rms=0.001872 Jy/beam
! Combined flux in latest and established models = 0.0877057 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0877057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074098Jy  sigma=1.216384
! Fit after  self-cal, rms=0.073895Jy  sigma=1.213386
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.796 mas, bmaj=11.77 mas, bpa=-6.393 degrees
! Estimated noise=0.319301 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107882 Jy
! Component: 100  -  total flux cleaned = 0.0164864 Jy
! Component: 150  -  total flux cleaned = 0.019936 Jy
! Component: 200  -  total flux cleaned = 0.0222218 Jy
! Total flux subtracted in 200 components = 0.0222218 Jy
! Clean residual min=-0.004488 max=0.004923 Jy/beam
! Clean residual mean=0.000013 rms=0.001178 Jy/beam
! Combined flux in latest and established models = 0.109928 Jy
! Performing phase self-cal
! Adding 75 model components to the UV plane model.
! The established model now contains 83 components and 0.109927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072549Jy  sigma=1.178096
! Fit after  self-cal, rms=0.072561Jy  sigma=1.177586
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.796 x 11.77 at -6.393 degrees (North through East)
! Clean map  min=-0.0044796  max=0.089759 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.13     KP        1.00     LA        1.03     
!   NL        1.10     OV        0.88     PT        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.04     KP        1.05     LA        1.03     
!   NL        1.16     OV        0.89     PT        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.11     KP        1.02     LA        1.03     
!   NL        1.07     OV        0.91     PT        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.00     KP        0.99     LA        1.05     
!   NL        1.16     OV        0.91     PT        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     HN        1.04     KP        1.10     LA        0.98     
!   NL        1.22     OV        0.91     PT        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        0.97     KP        1.06     LA        1.05     
!   NL        1.20     OV        0.87     PT        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        1.00     KP        1.02     LA        1.02     
!   NL        1.18     OV        0.86     PT        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.01     KP        1.02     LA        0.98     
!   NL        1.14     OV        0.90     PT        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.00     KP        1.04     LA        1.00     
!   NL        1.29     OV        0.91     PT        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        1.13     KP        1.01     LA        0.99     
!   NL        1.13     OV        0.94     PT        0.91     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.10     KP        1.04     LA        1.02     
!   NL        1.11     OV        0.89     PT        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        0.92     KP        1.02     LA        0.99     
!   NL        1.16     OV        0.90     PT        0.96     
! 
! 
! Fit before self-cal, rms=0.072561Jy  sigma=1.177586
! Fit after  self-cal, rms=0.074791Jy  sigma=1.165297
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.816 mas, bmaj=11.8 mas, bpa=-6.075 degrees
! Estimated noise=0.31894 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000162486 Jy
! Component: 100  -  total flux cleaned = -9.67152e-05 Jy
! Component: 150  -  total flux cleaned = -5.32964e-05 Jy
! Component: 200  -  total flux cleaned = -5.75672e-05 Jy
! Total flux subtracted in 200 components = -5.75672e-05 Jy
! Clean residual min=-0.002062 max=0.002272 Jy/beam
! Clean residual mean=0.000005 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.10987 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 108 components and 0.10987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074654Jy  sigma=1.162980
! Fit after  self-cal, rms=0.074847Jy  sigma=1.162500
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074847Jy  sigma=1.162500
! Fit after  self-cal, rms=0.075752Jy  sigma=1.161189
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.82 mas, bmaj=11.8 mas, bpa=-6.038 degrees
! Estimated noise=0.318942 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000544136 Jy
! Component: 100  -  total flux cleaned = -0.000641913 Jy
! Component: 150  -  total flux cleaned = -0.000719947 Jy
! Component: 200  -  total flux cleaned = -0.000806672 Jy
! Total flux subtracted in 200 components = -0.000806672 Jy
! Clean residual min=-0.001646 max=0.001757 Jy/beam
! Clean residual mean=0.000005 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.109063 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 123 components and 0.109063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075725Jy  sigma=1.160728
! Fit after  self-cal, rms=0.075773Jy  sigma=1.160683
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.56904e-05 Jy
! Component: 100  -  total flux cleaned = -0.000156188 Jy
! Component: 150  -  total flux cleaned = -0.00022687 Jy
! Component: 200  -  total flux cleaned = -0.000302043 Jy
! Total flux subtracted in 200 components = -0.000302043 Jy
! Clean residual min=-0.001640 max=0.001784 Jy/beam
! Clean residual mean=0.000005 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.108761 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 140 components and 0.108761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075766Jy  sigma=1.160584
! Fit after  self-cal, rms=0.075765Jy  sigma=1.160574
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075765Jy  sigma=1.160574
! Fit after  self-cal, rms=0.076739Jy  sigma=1.158630
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.825 mas, bmaj=11.79 mas, bpa=-6.123 degrees
! Estimated noise=0.319878 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000499134 Jy
! Component: 100  -  total flux cleaned = -0.000700612 Jy
! Component: 150  -  total flux cleaned = -0.000833136 Jy
! Component: 200  -  total flux cleaned = -0.000986333 Jy
! Total flux subtracted in 200 components = -0.000986333 Jy
! Clean residual min=-0.001627 max=0.001278 Jy/beam
! Clean residual mean=0.000002 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.107775 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 177 components and 0.107775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076727Jy  sigma=1.158393
! Fit after  self-cal, rms=0.076746Jy  sigma=1.158322
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000245359 Jy
! Component: 100  -  total flux cleaned = -0.000287368 Jy
! Component: 150  -  total flux cleaned = -0.000350747 Jy
! Component: 200  -  total flux cleaned = -0.00043378 Jy
! Total flux subtracted in 200 components = -0.00043378 Jy
! Clean residual min=-0.001624 max=0.001298 Jy/beam
! Clean residual mean=0.000002 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.107341 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 201 components and 0.107341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076740Jy  sigma=1.158238
! Fit after  self-cal, rms=0.076736Jy  sigma=1.158232
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076736Jy  sigma=1.158232
! Fit after  self-cal, rms=0.077164Jy  sigma=1.158160
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.649 mas, bmaj=12.5 mas, bpa=-4.18 degrees
! Estimated noise=0.321068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000496142 Jy
! Component: 100  -  total flux cleaned = -0.00061161 Jy
! Component: 150  -  total flux cleaned = -0.000687054 Jy
! Component: 200  -  total flux cleaned = -0.000742847 Jy
! Total flux subtracted in 200 components = -0.000742847 Jy
! Clean residual min=-0.001481 max=0.001094 Jy/beam
! Clean residual mean=0.000001 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.106598 Jy
selfcal
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 246 components and 0.106598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077158Jy  sigma=1.158044
! Fit after  self-cal, rms=0.077153Jy  sigma=1.158028
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000142855 Jy
! Component: 100  -  total flux cleaned = -0.000180304 Jy
! Component: 150  -  total flux cleaned = -0.000220942 Jy
! Component: 200  -  total flux cleaned = -0.000264301 Jy
! Total flux subtracted in 200 components = -0.000264301 Jy
! Clean residual min=-0.001471 max=0.001114 Jy/beam
! Clean residual mean=0.000001 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.106334 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 258 components and 0.106334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077151Jy  sigma=1.157978
! Fit after  self-cal, rms=0.077147Jy  sigma=1.157973
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.829 mas, bmaj=11.79 mas, bpa=-6.128 degrees
! Estimated noise=0.320498 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.829 x 11.79 at -6.128 degrees (North through East)
! Clean map  min=-0.0015285  max=0.091447 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.473 mas, bmaj=11.5 mas, bpa=-6.992 degrees
! Estimated noise=0.875723 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0700176 Jy
! Component: 100  -  total flux cleaned = 0.0881464 Jy
! Component: 150  -  total flux cleaned = 0.0957052 Jy
! Component: 200  -  total flux cleaned = 0.0993685 Jy
! Total flux subtracted in 200 components = 0.0993685 Jy
! Clean residual min=-0.003193 max=0.002842 Jy/beam
! Clean residual mean=0.000001 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 0.0993685 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 0.0993685 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.829 mas, bmaj=11.79 mas, bpa=-6.128 degrees
! Estimated noise=0.320498 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00356531 Jy
! Component: 100  -  total flux cleaned = 0.00524729 Jy
! Component: 150  -  total flux cleaned = 0.00580656 Jy
! Component: 200  -  total flux cleaned = 0.00617312 Jy
! Total flux subtracted in 200 components = 0.00617312 Jy
! Clean residual min=-0.001643 max=0.001240 Jy/beam
! Clean residual mean=-0.000000 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.105542 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 92 components and 0.105542 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.649 mas, bmaj=12.5 mas, bpa=-4.18 degrees
! Estimated noise=0.321068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000488446 Jy
! Component: 100  -  total flux cleaned = 0.000488208 Jy
! Component: 150  -  total flux cleaned = 0.000503662 Jy
! Component: 200  -  total flux cleaned = 0.000504362 Jy
! Total flux subtracted in 200 components = 0.000504362 Jy
! Clean residual min=-0.001471 max=0.001175 Jy/beam
! Clean residual mean=0.000000 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.106046 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.23047e-05 Jy
! Component: 100  -  total flux cleaned = 3.16383e-05 Jy
! Component: 150  -  total flux cleaned = 3.18949e-05 Jy
! Component: 200  -  total flux cleaned = 3.97584e-05 Jy
! Total flux subtracted in 200 components = 3.97584e-05 Jy
! Clean residual min=-0.001440 max=0.001160 Jy/beam
! Clean residual mean=0.000001 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.106086 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 130 components and 0.106086 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.829 mas, bmaj=11.79 mas, bpa=-6.128 degrees
! Estimated noise=0.320498 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.17171e-05 Jy
! Component: 100  -  total flux cleaned = -8.40977e-06 Jy
! Component: 150  -  total flux cleaned = -3.0431e-05 Jy
! Component: 200  -  total flux cleaned = -5.0734e-05 Jy
! Total flux subtracted in 200 components = -5.0734e-05 Jy
! Clean residual min=-0.001520 max=0.001259 Jy/beam
! Clean residual mean=0.000001 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.106035 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 142 components and 0.106035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077154Jy  sigma=1.158006
! Fit after  self-cal, rms=0.077144Jy  sigma=1.157993
wmodel J0605-3522_X_map.mod
! Writing 142 model components to file: J0605-3522_X_map.mod
wobs   J0605-3522_X_uvs.fits
! Writing UV FITS file: J0605-3522_X_uvs.fits
wwins  J0605-3522_X_map.win
! wwins: Wrote 1 windows to J0605-3522_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000466931 Jy
! Component: 100  -  total flux cleaned = -0.00066317 Jy
! Component: 150  -  total flux cleaned = -0.000644188 Jy
! Component: 200  -  total flux cleaned = -0.000549641 Jy
! Component: 250  -  total flux cleaned = -0.000478031 Jy
! Component: 300  -  total flux cleaned = -0.000427025 Jy
! Component: 350  -  total flux cleaned = -0.000378475 Jy
! Component: 400  -  total flux cleaned = -0.000282769 Jy
! Component: 450  -  total flux cleaned = -0.000205645 Jy
! Component: 500  -  total flux cleaned = -0.00016089 Jy
! Component: 550  -  total flux cleaned = -8.79278e-05 Jy
! Component: 600  -  total flux cleaned = -4.5572e-05 Jy
! Component: 650  -  total flux cleaned = -1.82354e-05 Jy
! Component: 700  -  total flux cleaned = 2.20458e-05 Jy
! Component: 750  -  total flux cleaned = 8.78447e-06 Jy
! Component: 800  -  total flux cleaned = 3.46505e-05 Jy
! Component: 850  -  total flux cleaned = 4.70025e-05 Jy
! Component: 900  -  total flux cleaned = 4.67651e-05 Jy
! Component: 950  -  total flux cleaned = 3.46413e-05 Jy
! Component: 1000  -  total flux cleaned = 3.45006e-05 Jy
! Component: 1050  -  total flux cleaned = 5.7865e-05 Jy
! Component: 1100  -  total flux cleaned = 3.48427e-05 Jy
! Component: 1150  -  total flux cleaned = 9.10816e-05 Jy
! Component: 1200  -  total flux cleaned = 9.10489e-05 Jy
! Component: 1250  -  total flux cleaned = 9.09594e-05 Jy
! Component: 1300  -  total flux cleaned = 0.000101822 Jy
! Component: 1350  -  total flux cleaned = 8.10847e-05 Jy
! Component: 1400  -  total flux cleaned = 0.000122491 Jy
! Component: 1450  -  total flux cleaned = 8.15528e-05 Jy
! Component: 1500  -  total flux cleaned = 8.15644e-05 Jy
! Component: 1550  -  total flux cleaned = 6.1646e-05 Jy
! Component: 1600  -  total flux cleaned = 3.23583e-05 Jy
! Component: 1650  -  total flux cleaned = 3.39168e-06 Jy
! Component: 1700  -  total flux cleaned = -1.57018e-05 Jy
! Component: 1750  -  total flux cleaned = -0.000100423 Jy
! Component: 1800  -  total flux cleaned = -0.000165609 Jy
! Component: 1850  -  total flux cleaned = -0.000239291 Jy
! Component: 1900  -  total flux cleaned = -0.000302976 Jy
! Component: 1950  -  total flux cleaned = -0.000366032 Jy
! Component: 2000  -  total flux cleaned = -0.000437479 Jy
! Component: 2050  -  total flux cleaned = -0.000499401 Jy
! Component: 2100  -  total flux cleaned = -0.000569584 Jy
! Component: 2150  -  total flux cleaned = -0.000639144 Jy
! Component: 2200  -  total flux cleaned = -0.000708042 Jy
! Component: 2250  -  total flux cleaned = -0.000767896 Jy
! Component: 2300  -  total flux cleaned = -0.000861294 Jy
! Component: 2350  -  total flux cleaned = -0.000911954 Jy
! Component: 2400  -  total flux cleaned = -0.0009874 Jy
! Component: 2450  -  total flux cleaned = -0.00106232 Jy
! Component: 2500  -  total flux cleaned = -0.00111199 Jy
! Component: 2550  -  total flux cleaned = -0.00116141 Jy
! Component: 2600  -  total flux cleaned = -0.001186 Jy
! Component: 2650  -  total flux cleaned = -0.00123494 Jy
! Component: 2700  -  total flux cleaned = -0.00126737 Jy
! Component: 2750  -  total flux cleaned = -0.00129967 Jy
! Component: 2800  -  total flux cleaned = -0.00133185 Jy
! Component: 2850  -  total flux cleaned = -0.00136385 Jy
! Component: 2900  -  total flux cleaned = -0.00140373 Jy
! Component: 2950  -  total flux cleaned = -0.00144346 Jy
! Component: 3000  -  total flux cleaned = -0.00147517 Jy
! Component: 3050  -  total flux cleaned = -0.001491 Jy
! Component: 3100  -  total flux cleaned = -0.0015305 Jy
! Component: 3150  -  total flux cleaned = -0.001562 Jy
! Component: 3200  -  total flux cleaned = -0.00159342 Jy
! Component: 3250  -  total flux cleaned = -0.00160912 Jy
! Component: 3300  -  total flux cleaned = -0.00162484 Jy
! Component: 3350  -  total flux cleaned = -0.00163269 Jy
! Component: 3400  -  total flux cleaned = -0.00163275 Jy
! Component: 3450  -  total flux cleaned = -0.00161705 Jy
! Component: 3500  -  total flux cleaned = -0.00159343 Jy
! Component: 3550  -  total flux cleaned = -0.00158554 Jy
! Component: 3600  -  total flux cleaned = -0.00154591 Jy
! Component: 3650  -  total flux cleaned = -0.00155387 Jy
! Component: 3700  -  total flux cleaned = -0.00152984 Jy
! Component: 3750  -  total flux cleaned = -0.00151378 Jy
! Component: 3800  -  total flux cleaned = -0.00149758 Jy
! Component: 3850  -  total flux cleaned = -0.00148948 Jy
! Component: 3900  -  total flux cleaned = -0.0014568 Jy
! Component: 3950  -  total flux cleaned = -0.00144038 Jy
! Component: 4000  -  total flux cleaned = -0.00139899 Jy
! Component: 4050  -  total flux cleaned = -0.00136562 Jy
! Total flux subtracted in 4096 components = -0.00133189 Jy
! Clean residual min=-0.000458 max=0.000471 Jy/beam
! Clean residual mean=-0.000002 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.104703 Jy
keep
! Adding 305 model components to the UV plane model.
! The established model now contains 447 components and 0.104703 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0605-3522_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.829 x 11.79 at -6.128 degrees (North through East)
! Clean map  min=-0.0014402  max=0.091836 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0605-3522_X_map.fits
wmodel /vlbi/uf001/uva//J0605-3522_X_map.mod
! Writing 447 model components to file: /vlbi/uf001/uva//J0605-3522_X_map.mod
wobs   /vlbi/uf001/uva//J0605-3522_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0605-3522_X_uvs.fits
wwins  /vlbi/uf001/uva//J0605-3522_X_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0605-3522_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0918357 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000149253 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.487565 0.487565 0.975129 1.95026 3.90052 7.80104 15.6021 31.2041 62.4083
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.091 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  615.302 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0605-3522_X_dfm.log closed on Sun Jan 13 22:50:35 2019