! Started logfile: /vlbi/uf001/uva//J0605+4030_X_dfm.log on Sun Jan 13 22:50:05 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0605+4030_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0605+4030_X_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.73731 visibilities/baseline/integration-bin. ! Found source: J0605+4030 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 37824 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0605+4030_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.178513Jy sigma=21.472205 ! Fit after self-cal, rms=0.384289Jy sigma=7.096599 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7646 mas, bmaj=1.128 mas, bpa=-3.484 degrees ! Estimated noise=0.45416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.471749 Jy ! Component: 100 - total flux cleaned = 0.58768 Jy ! Total flux subtracted in 100 components = 0.58768 Jy ! Clean residual min=-0.018910 max=0.046240 Jy/beam ! Clean residual mean=0.000007 rms=0.003995 Jy/beam ! Combined flux in latest and established models = 0.58768 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.58768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120309Jy sigma=2.179452 ! Fit after self-cal, rms=0.120242Jy sigma=2.177949 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0475879 Jy ! Component: 100 - total flux cleaned = 0.0692564 Jy ! Total flux subtracted in 100 components = 0.0692564 Jy ! Clean residual min=-0.015325 max=0.023611 Jy/beam ! Clean residual mean=0.000004 rms=0.003180 Jy/beam ! Combined flux in latest and established models = 0.656936 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 9 components and 0.656936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095574Jy sigma=1.735922 ! Fit after self-cal, rms=0.095317Jy sigma=1.730261 ! Inverting map ! Added new window around map position (0.4, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215631 Jy ! Component: 100 - total flux cleaned = 0.0334618 Jy ! Total flux subtracted in 100 components = 0.0334618 Jy ! Clean residual min=-0.013946 max=0.021535 Jy/beam ! Clean residual mean=0.000002 rms=0.002920 Jy/beam ! Combined flux in latest and established models = 0.690398 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.690398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088725Jy sigma=1.604755 ! Fit after self-cal, rms=0.088370Jy sigma=1.598463 ! Inverting map ! Added new window around map position (-1.8, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179232 Jy ! Component: 100 - total flux cleaned = 0.0245068 Jy ! Total flux subtracted in 100 components = 0.0245068 Jy ! Clean residual min=-0.013862 max=0.018563 Jy/beam ! Clean residual mean=-0.000000 rms=0.002687 Jy/beam ! Combined flux in latest and established models = 0.714905 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 22 components and 0.714905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084815Jy sigma=1.534587 ! Fit after self-cal, rms=0.084439Jy sigma=1.527865 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9765 mas, bmaj=1.425 mas, bpa=-1.728 degrees ! Estimated noise=0.202282 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017284 Jy ! Component: 100 - total flux cleaned = 0.0252345 Jy ! Component: 150 - total flux cleaned = 0.0293592 Jy ! Component: 200 - total flux cleaned = 0.0308629 Jy ! Total flux subtracted in 200 components = 0.0308629 Jy ! Clean residual min=-0.013858 max=0.013072 Jy/beam ! Clean residual mean=0.000003 rms=0.002675 Jy/beam ! Combined flux in latest and established models = 0.745768 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 44 components and 0.745768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080052Jy sigma=1.445405 ! Fit after self-cal, rms=0.079837Jy sigma=1.441236 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9765 x 1.425 at -1.728 degrees (North through East) ! Clean map min=-0.013212 max=0.61569 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.93 KP 1.07 ! LA 0.96 MK 1.03 NL 1.11 OV 0.92 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.95 KP 1.06 ! LA 0.95 MK 1.03 NL 1.11 OV 0.91 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.95 KP 1.07 ! LA 0.94 MK 1.03 NL 1.12 OV 0.91 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.95 KP 1.07 ! LA 0.94 MK 1.03 NL 1.11 OV 0.91 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.94 KP 1.06 ! LA 0.94 MK 1.02 NL 1.10 OV 0.92 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.93 KP 1.05 ! LA 0.95 MK 1.03 NL 1.10 OV 0.92 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.94 KP 1.07 ! LA 0.94 MK 1.03 NL 1.11 OV 0.91 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.94 KP 1.06 ! LA 0.94 MK 1.03 NL 1.10 OV 0.91 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.94 KP 1.04 ! LA 0.94 MK 1.02 NL 1.10 OV 0.90 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.94 KP 1.05 ! LA 0.94 MK 1.03 NL 1.10 OV 0.90 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.93 KP 1.04 ! LA 0.94 MK 1.03 NL 1.10 OV 0.90 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.93 KP 1.03 ! LA 0.93 MK 1.02 NL 1.10 OV 0.90 ! PT 0.99 SC 0.96 ! ! ! Fit before self-cal, rms=0.079837Jy sigma=1.441236 ! Fit after self-cal, rms=0.060878Jy sigma=1.092263 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9735 mas, bmaj=1.425 mas, bpa=-1.062 degrees ! Estimated noise=0.201716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00844933 Jy ! Component: 100 - total flux cleaned = -0.0110024 Jy ! Component: 150 - total flux cleaned = -0.0119352 Jy ! Component: 200 - total flux cleaned = -0.0119355 Jy ! Total flux subtracted in 200 components = -0.0119355 Jy ! Clean residual min=-0.004871 max=0.007807 Jy/beam ! Clean residual mean=0.000019 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.733832 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.733832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059106Jy sigma=1.056403 ! Fit after self-cal, rms=0.059060Jy sigma=1.054283 ! Inverting map ! Added new window around map position (1, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00887694 Jy ! Component: 100 - total flux cleaned = 0.0146391 Jy ! Component: 150 - total flux cleaned = 0.0183894 Jy ! Component: 200 - total flux cleaned = 0.0201912 Jy ! Total flux subtracted in 200 components = 0.0201912 Jy ! Clean residual min=-0.004642 max=0.004482 Jy/beam ! Clean residual mean=0.000014 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.754023 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 85 components and 0.754023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057401Jy sigma=1.024037 ! Fit after self-cal, rms=0.057314Jy sigma=1.022453 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057314Jy sigma=1.022453 ! Fit after self-cal, rms=0.055187Jy sigma=0.988889 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9709 mas, bmaj=1.424 mas, bpa=-1.414 degrees ! Estimated noise=0.201265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00221698 Jy ! Component: 100 - total flux cleaned = -0.0034931 Jy ! Component: 150 - total flux cleaned = -0.00371056 Jy ! Component: 200 - total flux cleaned = -0.00370767 Jy ! Total flux subtracted in 200 components = -0.00370767 Jy ! Clean residual min=-0.003155 max=0.002431 Jy/beam ! Clean residual mean=0.000006 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.750316 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 104 components and 0.750316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054706Jy sigma=0.979213 ! Fit after self-cal, rms=0.054689Jy sigma=0.978800 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00024474 Jy ! Component: 100 - total flux cleaned = -0.000169444 Jy ! Component: 150 - total flux cleaned = -2.96104e-05 Jy ! Component: 200 - total flux cleaned = 0.000101113 Jy ! Total flux subtracted in 200 components = 0.000101113 Jy ! Clean residual min=-0.003030 max=0.002234 Jy/beam ! Clean residual mean=0.000006 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.750417 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 116 components and 0.750417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054500Jy sigma=0.975081 ! Fit after self-cal, rms=0.054491Jy sigma=0.974857 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054491Jy sigma=0.974857 ! Fit after self-cal, rms=0.054301Jy sigma=0.972789 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9697 mas, bmaj=1.424 mas, bpa=-1.497 degrees ! Estimated noise=0.201101 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00171417 Jy ! Component: 100 - total flux cleaned = -0.00259411 Jy ! Component: 150 - total flux cleaned = -0.0030373 Jy ! Component: 200 - total flux cleaned = -0.0030379 Jy ! Total flux subtracted in 200 components = -0.0030379 Jy ! Clean residual min=-0.002554 max=0.002058 Jy/beam ! Clean residual mean=0.000005 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.747379 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 119 components and 0.747379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054083Jy sigma=0.968379 ! Fit after self-cal, rms=0.054078Jy sigma=0.968227 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000256625 Jy ! Component: 100 - total flux cleaned = -0.000313653 Jy ! Component: 150 - total flux cleaned = -0.000262938 Jy ! Component: 200 - total flux cleaned = -0.000164433 Jy ! Total flux subtracted in 200 components = -0.000164433 Jy ! Clean residual min=-0.002530 max=0.001946 Jy/beam ! Clean residual mean=0.000005 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.747214 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 127 components and 0.747214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053979Jy sigma=0.966324 ! Fit after self-cal, rms=0.053975Jy sigma=0.966202 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053975Jy sigma=0.966202 ! Fit after self-cal, rms=0.053866Jy sigma=0.965146 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.2 mas, bmaj=2.438 mas, bpa=4.131 degrees ! Estimated noise=0.262116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123102 Jy ! Component: 100 - total flux cleaned = -0.00160631 Jy ! Component: 150 - total flux cleaned = -0.00166552 Jy ! Component: 200 - total flux cleaned = -0.00152158 Jy ! Total flux subtracted in 200 components = -0.00152158 Jy ! Clean residual min=-0.002536 max=0.002313 Jy/beam ! Clean residual mean=0.000010 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.745693 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 144 components and 0.745693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053807Jy sigma=0.963860 ! Fit after self-cal, rms=0.053803Jy sigma=0.963728 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286456 Jy ! Component: 100 - total flux cleaned = 0.000367583 Jy ! Component: 150 - total flux cleaned = 0.00047384 Jy ! Component: 200 - total flux cleaned = 0.000539067 Jy ! Total flux subtracted in 200 components = 0.000539067 Jy ! Clean residual min=-0.002461 max=0.002262 Jy/beam ! Clean residual mean=0.000010 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.746232 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 153 components and 0.746232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053787Jy sigma=0.963408 ! Fit after self-cal, rms=0.053788Jy sigma=0.963366 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9688 mas, bmaj=1.424 mas, bpa=-1.533 degrees ! Estimated noise=0.200975 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9688 x 1.424 at -1.533 degrees (North through East) ! Clean map min=-0.0021798 max=0.61378 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053788Jy sigma=0.963366 ! Fit after self-cal, rms=0.050741Jy sigma=0.896970 ! Inverting map and beam ! Estimated beam: bmin=0.969 mas, bmaj=1.423 mas, bpa=-1.522 degrees ! Estimated noise=0.201064 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102381 Jy ! Component: 100 - total flux cleaned = -0.00143289 Jy ! Component: 150 - total flux cleaned = -0.00163405 Jy ! Component: 200 - total flux cleaned = -0.00176989 Jy ! Total flux subtracted in 200 components = -0.00176989 Jy ! Clean residual min=-0.002094 max=0.001808 Jy/beam ! Clean residual mean=0.000004 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.744462 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 157 components and 0.744462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050632Jy sigma=0.894819 ! Fit after self-cal, rms=0.050628Jy sigma=0.894719 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000279938 Jy ! Component: 100 - total flux cleaned = -0.000361983 Jy ! Component: 150 - total flux cleaned = -0.000439346 Jy ! Component: 200 - total flux cleaned = -0.000440382 Jy ! Total flux subtracted in 200 components = -0.000440382 Jy ! Clean residual min=-0.001988 max=0.001763 Jy/beam ! Clean residual mean=0.000004 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.744022 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 162 components and 0.744022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050572Jy sigma=0.893650 ! Fit after self-cal, rms=0.050571Jy sigma=0.893587 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050571Jy sigma=0.893587 ! Fit after self-cal, rms=0.050526Jy sigma=0.893176 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7584 mas, bmaj=1.126 mas, bpa=-3.322 degrees ! Estimated noise=0.451347 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.468485 Jy ! Component: 100 - total flux cleaned = 0.586472 Jy ! Component: 150 - total flux cleaned = 0.635429 Jy ! Component: 200 - total flux cleaned = 0.661527 Jy ! Total flux subtracted in 200 components = 0.661527 Jy ! Clean residual min=-0.005857 max=0.012912 Jy/beam ! Clean residual mean=0.000008 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.661527 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.661527 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9684 mas, bmaj=1.423 mas, bpa=-1.538 degrees ! Estimated noise=0.200974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019822 Jy ! Component: 100 - total flux cleaned = 0.0308261 Jy ! Component: 150 - total flux cleaned = 0.0389031 Jy ! Component: 200 - total flux cleaned = 0.0453391 Jy ! Total flux subtracted in 200 components = 0.0453391 Jy ! Clean residual min=-0.002561 max=0.004177 Jy/beam ! Clean residual mean=0.000013 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.706866 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 42 components and 0.706866 Jy ! Inverting map ! Added new window around map position (1.2, 10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533549 Jy ! Component: 100 - total flux cleaned = 0.00977838 Jy ! Component: 150 - total flux cleaned = 0.0135391 Jy ! Component: 200 - total flux cleaned = 0.0167574 Jy ! Total flux subtracted in 200 components = 0.0167574 Jy ! Clean residual min=-0.002025 max=0.002510 Jy/beam ! Clean residual mean=0.000009 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.723624 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 58 components and 0.723623 Jy ! Inverting map ! Added new window around map position (-0.8, 9.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029642 Jy ! Component: 100 - total flux cleaned = 0.00546729 Jy ! Component: 150 - total flux cleaned = 0.00766586 Jy ! Component: 200 - total flux cleaned = 0.00961505 Jy ! Total flux subtracted in 200 components = 0.00961505 Jy ! Clean residual min=-0.001690 max=0.001847 Jy/beam ! Clean residual mean=0.000006 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.733238 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 80 components and 0.733239 Jy ! Inverting map ! Added new window around map position (-18.2, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191244 Jy ! Component: 100 - total flux cleaned = 0.00351338 Jy ! Component: 150 - total flux cleaned = 0.00479433 Jy ! Component: 200 - total flux cleaned = 0.00591233 Jy ! Total flux subtracted in 200 components = 0.00591233 Jy ! Clean residual min=-0.001529 max=0.001577 Jy/beam ! Clean residual mean=0.000005 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.739151 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 98 components and 0.739151 Jy ! Inverting map ! Added new window around map position (-0.4, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148719 Jy ! Component: 100 - total flux cleaned = 0.0024175 Jy ! Component: 150 - total flux cleaned = 0.00327649 Jy ! Component: 200 - total flux cleaned = 0.00399758 Jy ! Total flux subtracted in 200 components = 0.00399758 Jy ! Clean residual min=-0.001437 max=0.001426 Jy/beam ! Clean residual mean=0.000004 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.743149 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 117 components and 0.743149 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.201 mas, bmaj=2.439 mas, bpa=4.177 degrees ! Estimated noise=0.262212 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143057 Jy ! Component: 100 - total flux cleaned = 0.00246963 Jy ! Component: 150 - total flux cleaned = 0.00331474 Jy ! Component: 200 - total flux cleaned = 0.00388805 Jy ! Total flux subtracted in 200 components = 0.00388805 Jy ! Clean residual min=-0.001570 max=0.001662 Jy/beam ! Clean residual mean=0.000006 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.747037 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030219 Jy ! Component: 100 - total flux cleaned = 0.000554525 Jy ! Component: 150 - total flux cleaned = 0.000702861 Jy ! Component: 200 - total flux cleaned = 0.000861494 Jy ! Total flux subtracted in 200 components = 0.000861494 Jy ! Clean residual min=-0.001519 max=0.001629 Jy/beam ! Clean residual mean=0.000006 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.747898 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 161 components and 0.747898 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9684 mas, bmaj=1.423 mas, bpa=-1.538 degrees ! Estimated noise=0.200974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000192263 Jy ! Component: 100 - total flux cleaned = -5.76101e-05 Jy ! Component: 150 - total flux cleaned = 6.67091e-05 Jy ! Component: 200 - total flux cleaned = 0.00015457 Jy ! Total flux subtracted in 200 components = 0.00015457 Jy ! Clean residual min=-0.001415 max=0.001378 Jy/beam ! Clean residual mean=0.000002 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.748053 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 171 components and 0.748053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050306Jy sigma=0.889262 ! Fit after self-cal, rms=0.050264Jy sigma=0.888406 wmodel J0605+4030_X_map.mod ! Writing 171 model components to file: J0605+4030_X_map.mod wobs J0605+4030_X_uvs.fits ! Writing UV FITS file: J0605+4030_X_uvs.fits wwins J0605+4030_X_map.win ! wwins: Wrote 9 windows to J0605+4030_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.43828e-05 Jy ! Component: 100 - total flux cleaned = 8.48818e-05 Jy ! Component: 150 - total flux cleaned = 3.90493e-05 Jy ! Component: 200 - total flux cleaned = -4.92588e-05 Jy ! Component: 250 - total flux cleaned = -7.05725e-05 Jy ! Component: 300 - total flux cleaned = -4.96829e-05 Jy ! Component: 350 - total flux cleaned = -2.90428e-05 Jy ! Component: 400 - total flux cleaned = -2.91262e-05 Jy ! Component: 450 - total flux cleaned = -2.90365e-05 Jy ! Component: 500 - total flux cleaned = 8.60487e-06 Jy ! Component: 550 - total flux cleaned = -2.87899e-05 Jy ! Component: 600 - total flux cleaned = 7.80871e-06 Jy ! Component: 650 - total flux cleaned = -6.43352e-05 Jy ! Component: 700 - total flux cleaned = -4.64421e-05 Jy ! Component: 750 - total flux cleaned = -9.82244e-05 Jy ! Component: 800 - total flux cleaned = -6.36761e-05 Jy ! Component: 850 - total flux cleaned = -4.70636e-05 Jy ! Component: 900 - total flux cleaned = -8.04495e-05 Jy ! Component: 950 - total flux cleaned = -0.00014552 Jy ! Component: 1000 - total flux cleaned = -8.07434e-05 Jy ! Component: 1050 - total flux cleaned = -9.62789e-05 Jy ! Component: 1100 - total flux cleaned = -3.369e-05 Jy ! Component: 1150 - total flux cleaned = -3.41369e-05 Jy ! Component: 1200 - total flux cleaned = -8.00604e-05 Jy ! Component: 1250 - total flux cleaned = -6.48482e-05 Jy ! Component: 1300 - total flux cleaned = -6.47099e-05 Jy ! Component: 1350 - total flux cleaned = -9.42349e-05 Jy ! Component: 1400 - total flux cleaned = -6.50909e-05 Jy ! Component: 1450 - total flux cleaned = -5.06825e-05 Jy ! Component: 1500 - total flux cleaned = -6.48196e-05 Jy ! Component: 1550 - total flux cleaned = -2.27048e-05 Jy ! Component: 1600 - total flux cleaned = -5.07393e-05 Jy ! Component: 1650 - total flux cleaned = 4.46614e-06 Jy ! Component: 1700 - total flux cleaned = 4.45929e-06 Jy ! Component: 1750 - total flux cleaned = 4.49864e-06 Jy ! Component: 1800 - total flux cleaned = 3.10099e-05 Jy ! Component: 1850 - total flux cleaned = 8.3597e-05 Jy ! Component: 1900 - total flux cleaned = 0.000109575 Jy ! Component: 1950 - total flux cleaned = 7.11349e-05 Jy ! Component: 2000 - total flux cleaned = 0.000122199 Jy ! Component: 2050 - total flux cleaned = 0.000147666 Jy ! Component: 2100 - total flux cleaned = 0.000160138 Jy ! Component: 2150 - total flux cleaned = 0.000234486 Jy ! Component: 2200 - total flux cleaned = 0.000234513 Jy ! Component: 2250 - total flux cleaned = 0.000270856 Jy ! Component: 2300 - total flux cleaned = 0.000306768 Jy ! Component: 2350 - total flux cleaned = 0.000365974 Jy ! Component: 2400 - total flux cleaned = 0.000330478 Jy ! Component: 2450 - total flux cleaned = 0.000342148 Jy ! Component: 2500 - total flux cleaned = 0.000376867 Jy ! Component: 2550 - total flux cleaned = 0.000342715 Jy ! Component: 2600 - total flux cleaned = 0.000388169 Jy ! Component: 2650 - total flux cleaned = 0.000455906 Jy ! Component: 2700 - total flux cleaned = 0.000467034 Jy ! Component: 2750 - total flux cleaned = 0.000478356 Jy ! Component: 2800 - total flux cleaned = 0.000533181 Jy ! Component: 2850 - total flux cleaned = 0.000522317 Jy ! Component: 2900 - total flux cleaned = 0.00063017 Jy ! Component: 2950 - total flux cleaned = 0.000598001 Jy ! Component: 3000 - total flux cleaned = 0.000598041 Jy ! Component: 3050 - total flux cleaned = 0.000671602 Jy ! Component: 3100 - total flux cleaned = 0.000671545 Jy ! Component: 3150 - total flux cleaned = 0.000723362 Jy ! Component: 3200 - total flux cleaned = 0.000764427 Jy ! Component: 3250 - total flux cleaned = 0.000713355 Jy ! Component: 3300 - total flux cleaned = 0.000794392 Jy ! Component: 3350 - total flux cleaned = 0.000814526 Jy ! Component: 3400 - total flux cleaned = 0.000844317 Jy ! Component: 3450 - total flux cleaned = 0.000883959 Jy ! Component: 3500 - total flux cleaned = 0.00088397 Jy ! Component: 3550 - total flux cleaned = 0.000864382 Jy ! Component: 3600 - total flux cleaned = 0.000893489 Jy ! Component: 3650 - total flux cleaned = 0.000922384 Jy ! Component: 3700 - total flux cleaned = 0.000950948 Jy ! Component: 3750 - total flux cleaned = 0.000998356 Jy ! Component: 3800 - total flux cleaned = 0.0010549 Jy ! Component: 3850 - total flux cleaned = 0.00105489 Jy ! Component: 3900 - total flux cleaned = 0.00111069 Jy ! Component: 3950 - total flux cleaned = 0.00114754 Jy ! Component: 4000 - total flux cleaned = 0.00118408 Jy ! Component: 4050 - total flux cleaned = 0.00119324 Jy ! Total flux subtracted in 4096 components = 0.00122937 Jy ! Clean residual min=-0.000555 max=0.000540 Jy/beam ! Clean residual mean=0.000001 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.749282 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 466 components and 0.749282 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0605+4030_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9684 x 1.423 at -1.538 degrees (North through East) ! Clean map min=-0.00098849 max=0.61408 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0605+4030_X_map.fits wmodel /vlbi/uf001/uva//J0605+4030_X_map.mod ! Writing 466 model components to file: /vlbi/uf001/uva//J0605+4030_X_map.mod wobs /vlbi/uf001/uva//J0605+4030_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0605+4030_X_uvs.fits wwins /vlbi/uf001/uva//J0605+4030_X_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uva//J0605+4030_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.614081 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000154781 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0756161 0.0756161 0.151232 0.302465 0.604929 1.20986 2.41972 4.83943 9.67887 19.3577 38.7155 77.4309 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.614 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3967.41 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0605+4030_X_dfm.log closed on Sun Jan 13 22:50:13 2019