! Started logfile: /vlbi/uf001/uva//J0603+2159_S_dfm.log on Sun Jan 13 22:48:47 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0603+2159_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0603+2159_S_uva.fits ! AN table 1: 87 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.920307 visibilities/baseline/integration-bin. ! Found source: J0603+2159 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 10809 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0603+2159_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.017976Jy sigma=22.044179 ! Fit after self-cal, rms=0.897125Jy sigma=19.590522 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=6.117 mas, bpa=-4.862 degrees ! Estimated noise=0.461633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0747589 Jy ! Component: 100 - total flux cleaned = 0.101314 Jy ! Total flux subtracted in 100 components = 0.101314 Jy ! Clean residual min=-0.013220 max=0.018232 Jy/beam ! Clean residual mean=-0.000180 rms=0.004606 Jy/beam ! Combined flux in latest and established models = 0.101314 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.101314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.139566Jy sigma=2.780115 ! Fit after self-cal, rms=0.138546Jy sigma=2.760835 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.464 mas, bmaj=6.901 mas, bpa=-3.175 degrees ! Estimated noise=0.323364 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0314935 Jy ! Component: 100 - total flux cleaned = 0.0518795 Jy ! Component: 150 - total flux cleaned = 0.0657134 Jy ! Component: 200 - total flux cleaned = 0.0752851 Jy ! Total flux subtracted in 200 components = 0.0752851 Jy ! Clean residual min=-0.019031 max=0.022833 Jy/beam ! Clean residual mean=-0.000124 rms=0.006185 Jy/beam ! Combined flux in latest and established models = 0.176599 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 76 components and 0.176599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.127992Jy sigma=2.609912 ! Fit after self-cal, rms=0.126826Jy sigma=2.587430 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.464 x 6.901 at -3.175 degrees (North through East) ! Clean map min=-0.019353 max=0.099035 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 0.96 HN 1.20 KP 1.08 ! LA 0.69 MK 1.04 NL 1.84 OV 1.03 ! PT 0.77 SC 1.32 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 0.89 HN 1.23 KP 1.11 ! LA 0.73 MK 0.93 NL 1.54 OV 1.00 ! PT 0.77 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 0.93 HN 1.28 KP 1.22 ! LA 0.68 MK 1.03 NL 1.53 OV 1.15 ! PT 0.76 SC 1.14 ! ! ! Fit before self-cal, rms=0.126826Jy sigma=2.587430 ! Fit after self-cal, rms=0.121445Jy sigma=2.471117 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.558 mas, bmaj=7.345 mas, bpa=-3.98 degrees ! Estimated noise=0.348163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00550947 Jy ! Component: 100 - total flux cleaned = 0.00654029 Jy ! Component: 150 - total flux cleaned = 0.00663263 Jy ! Component: 200 - total flux cleaned = 0.00663342 Jy ! Total flux subtracted in 200 components = 0.00663342 Jy ! Clean residual min=-0.019121 max=0.022472 Jy/beam ! Clean residual mean=-0.000088 rms=0.005981 Jy/beam ! Combined flux in latest and established models = 0.183232 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 79 components and 0.183232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.120869Jy sigma=2.471872 ! Fit after self-cal, rms=0.123541Jy sigma=2.445347 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.123541Jy sigma=2.445347 ! Fit after self-cal, rms=0.505403Jy sigma=2.195943 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.677 mas, bmaj=7.674 mas, bpa=-5.38 degrees ! Estimated noise=0.399873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00753875 Jy ! Component: 100 - total flux cleaned = 0.00797888 Jy ! Component: 150 - total flux cleaned = 0.00798375 Jy ! Component: 200 - total flux cleaned = 0.00777663 Jy ! Total flux subtracted in 200 components = 0.00777663 Jy ! Clean residual min=-0.016031 max=0.022245 Jy/beam ! Clean residual mean=0.000017 rms=0.005055 Jy/beam ! Combined flux in latest and established models = 0.191009 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 0.191009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.504593Jy sigma=2.196767 ! Fit after self-cal, rms=0.509160Jy sigma=2.166011 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149443 Jy ! Component: 100 - total flux cleaned = -0.00158485 Jy ! Component: 150 - total flux cleaned = -0.00166677 Jy ! Component: 200 - total flux cleaned = -0.00174434 Jy ! Total flux subtracted in 200 components = -0.00174434 Jy ! Clean residual min=-0.016080 max=0.020759 Jy/beam ! Clean residual mean=0.000016 rms=0.005051 Jy/beam ! Combined flux in latest and established models = 0.189264 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 86 components and 0.189264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.509027Jy sigma=2.165237 ! Fit after self-cal, rms=0.509070Jy sigma=2.164985 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.509070Jy sigma=2.164985 ! Fit after self-cal, rms=0.743397Jy sigma=2.154592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.659 mas, bmaj=7.839 mas, bpa=-5.4 degrees ! Estimated noise=0.415567 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399013 Jy ! Component: 100 - total flux cleaned = 0.00413017 Jy ! Component: 150 - total flux cleaned = 0.00402016 Jy ! Component: 200 - total flux cleaned = 0.00392606 Jy ! Total flux subtracted in 200 components = 0.00392606 Jy ! Clean residual min=-0.016438 max=0.022005 Jy/beam ! Clean residual mean=0.000022 rms=0.005094 Jy/beam ! Combined flux in latest and established models = 0.19319 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 88 components and 0.19319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.742993Jy sigma=2.156527 ! Fit after self-cal, rms=0.743961Jy sigma=2.154991 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18.5, 23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198134 Jy ! Component: 100 - total flux cleaned = 0.0252483 Jy ! Component: 150 - total flux cleaned = 0.0270222 Jy ! Component: 200 - total flux cleaned = 0.0275172 Jy ! Total flux subtracted in 200 components = 0.0275172 Jy ! Clean residual min=-0.016612 max=0.020825 Jy/beam ! Clean residual mean=0.000004 rms=0.004685 Jy/beam ! Combined flux in latest and established models = 0.220708 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 106 components and 0.220708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.741964Jy sigma=2.098281 ! Fit after self-cal, rms=0.741403Jy sigma=2.088768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.741403Jy sigma=2.088768 ! Fit after self-cal, rms=0.488732Jy sigma=2.074576 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.38 mas, bmaj=11.81 mas, bpa=-5.698 degrees ! Estimated noise=0.454406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130854 Jy ! Component: 100 - total flux cleaned = 0.0161746 Jy ! Component: 150 - total flux cleaned = 0.0171556 Jy ! Component: 200 - total flux cleaned = 0.0181876 Jy ! Total flux subtracted in 200 components = 0.0181876 Jy ! Clean residual min=-0.023630 max=0.024457 Jy/beam ! Clean residual mean=0.000028 rms=0.007026 Jy/beam ! Combined flux in latest and established models = 0.238895 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 129 components and 0.238895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.487867Jy sigma=2.057890 ! Fit after self-cal, rms=0.488637Jy sigma=2.052544 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426533 Jy ! Component: 100 - total flux cleaned = 0.00458108 Jy ! Component: 150 - total flux cleaned = 0.00511355 Jy ! Component: 200 - total flux cleaned = 0.00569932 Jy ! Total flux subtracted in 200 components = 0.00569932 Jy ! Clean residual min=-0.023857 max=0.023170 Jy/beam ! Clean residual mean=0.000032 rms=0.006950 Jy/beam ! Combined flux in latest and established models = 0.244595 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 139 components and 0.244594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.488131Jy sigma=2.053554 ! Fit after self-cal, rms=0.488100Jy sigma=2.052762 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.575 mas, bmaj=7.905 mas, bpa=-5.999 degrees ! Estimated noise=0.405999 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.575 x 7.905 at -5.999 degrees (North through East) ! Clean map min=-0.015391 max=0.11923 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=6.882 mas, bpa=-7.411 degrees ! Estimated noise=0.6227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.092152 Jy ! Component: 100 - total flux cleaned = 0.128035 Jy ! Component: 150 - total flux cleaned = 0.152696 Jy ! Component: 200 - total flux cleaned = 0.171417 Jy ! Total flux subtracted in 200 components = 0.171417 Jy ! Clean residual min=-0.018448 max=0.021839 Jy/beam ! Clean residual mean=-0.000075 rms=0.004676 Jy/beam ! Combined flux in latest and established models = 0.171417 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.171417 Jy ! Inverting map and beam ! Estimated beam: bmin=3.575 mas, bmaj=7.905 mas, bpa=-5.999 degrees ! Estimated noise=0.405999 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191003 Jy ! Component: 100 - total flux cleaned = 0.0326638 Jy ! Component: 150 - total flux cleaned = 0.0420031 Jy ! Component: 200 - total flux cleaned = 0.0472111 Jy ! Total flux subtracted in 200 components = 0.0472111 Jy ! Clean residual min=-0.016165 max=0.017535 Jy/beam ! Clean residual mean=-0.000004 rms=0.004629 Jy/beam ! Combined flux in latest and established models = 0.218628 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 42 components and 0.218628 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.38 mas, bmaj=11.81 mas, bpa=-5.698 degrees ! Estimated noise=0.454406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109797 Jy ! Component: 100 - total flux cleaned = 0.0136951 Jy ! Component: 150 - total flux cleaned = 0.0153186 Jy ! Component: 200 - total flux cleaned = 0.0169034 Jy ! Total flux subtracted in 200 components = 0.0169034 Jy ! Clean residual min=-0.024316 max=0.023224 Jy/beam ! Clean residual mean=0.000020 rms=0.007091 Jy/beam ! Combined flux in latest and established models = 0.235531 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139175 Jy ! Component: 100 - total flux cleaned = 0.00245315 Jy ! Component: 150 - total flux cleaned = 0.00341154 Jy ! Component: 200 - total flux cleaned = 0.00427841 Jy ! Total flux subtracted in 200 components = 0.00427841 Jy ! Clean residual min=-0.024156 max=0.022956 Jy/beam ! Clean residual mean=0.000025 rms=0.007009 Jy/beam ! Combined flux in latest and established models = 0.23981 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 66 components and 0.23981 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.575 mas, bmaj=7.905 mas, bpa=-5.999 degrees ! Estimated noise=0.405999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000347095 Jy ! Component: 100 - total flux cleaned = 5.60809e-06 Jy ! Component: 150 - total flux cleaned = -0.000283591 Jy ! Component: 200 - total flux cleaned = -0.000547447 Jy ! Total flux subtracted in 200 components = -0.000547447 Jy ! Clean residual min=-0.015758 max=0.016623 Jy/beam ! Clean residual mean=0.000014 rms=0.004387 Jy/beam ! Combined flux in latest and established models = 0.239262 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 85 components and 0.239262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.487629Jy sigma=2.054904 ! Fit after self-cal, rms=0.487376Jy sigma=2.052823 wmodel J0603+2159_S_map.mod ! Writing 85 model components to file: J0603+2159_S_map.mod wobs J0603+2159_S_uvs.fits ! Writing UV FITS file: J0603+2159_S_uvs.fits wwins J0603+2159_S_map.win ! wwins: Wrote 2 windows to J0603+2159_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00522396 Jy ! Component: 100 - total flux cleaned = 0.0091459 Jy ! Component: 150 - total flux cleaned = 0.0112628 Jy ! Component: 200 - total flux cleaned = 0.0117681 Jy ! Component: 250 - total flux cleaned = 0.0124988 Jy ! Component: 300 - total flux cleaned = 0.0139009 Jy ! Component: 350 - total flux cleaned = 0.015264 Jy ! Component: 400 - total flux cleaned = 0.0163641 Jy ! Component: 450 - total flux cleaned = 0.0167932 Jy ! Component: 500 - total flux cleaned = 0.0174238 Jy ! Component: 550 - total flux cleaned = 0.0180363 Jy ! Component: 600 - total flux cleaned = 0.0180375 Jy ! Component: 650 - total flux cleaned = 0.0184353 Jy ! Component: 700 - total flux cleaned = 0.0186302 Jy ! Component: 750 - total flux cleaned = 0.0188203 Jy ! Component: 800 - total flux cleaned = 0.018638 Jy ! Component: 850 - total flux cleaned = 0.0190061 Jy ! Component: 900 - total flux cleaned = 0.0193672 Jy ! Component: 950 - total flux cleaned = 0.0195428 Jy ! Component: 1000 - total flux cleaned = 0.0195432 Jy ! Component: 1050 - total flux cleaned = 0.0203957 Jy ! Component: 1100 - total flux cleaned = 0.0203922 Jy ! Component: 1150 - total flux cleaned = 0.0215501 Jy ! Component: 1200 - total flux cleaned = 0.0217118 Jy ! Component: 1250 - total flux cleaned = 0.0223544 Jy ! Component: 1300 - total flux cleaned = 0.0221968 Jy ! Component: 1350 - total flux cleaned = 0.0221992 Jy ! Component: 1400 - total flux cleaned = 0.0225075 Jy ! Component: 1450 - total flux cleaned = 0.0223568 Jy ! Component: 1500 - total flux cleaned = 0.0223598 Jy ! Component: 1550 - total flux cleaned = 0.0225102 Jy ! Component: 1600 - total flux cleaned = 0.0228009 Jy ! Component: 1650 - total flux cleaned = 0.02237 Jy ! Component: 1700 - total flux cleaned = 0.0225116 Jy ! Component: 1750 - total flux cleaned = 0.0220874 Jy ! Component: 1800 - total flux cleaned = 0.0218069 Jy ! Component: 1850 - total flux cleaned = 0.021394 Jy ! Component: 1900 - total flux cleaned = 0.0211204 Jy ! Component: 1950 - total flux cleaned = 0.0203109 Jy ! Component: 2000 - total flux cleaned = 0.020046 Jy ! Component: 2050 - total flux cleaned = 0.0197825 Jy ! Component: 2100 - total flux cleaned = 0.0193909 Jy ! Component: 2150 - total flux cleaned = 0.0191338 Jy ! Component: 2200 - total flux cleaned = 0.0190068 Jy ! Component: 2250 - total flux cleaned = 0.0185011 Jy ! Component: 2300 - total flux cleaned = 0.0186277 Jy ! Component: 2350 - total flux cleaned = 0.0183787 Jy ! Component: 2400 - total flux cleaned = 0.0181331 Jy ! Component: 2450 - total flux cleaned = 0.0180114 Jy ! Component: 2500 - total flux cleaned = 0.0176483 Jy ! Component: 2550 - total flux cleaned = 0.0176484 Jy ! Component: 2600 - total flux cleaned = 0.0176478 Jy ! Component: 2650 - total flux cleaned = 0.0171738 Jy ! Component: 2700 - total flux cleaned = 0.0174069 Jy ! Component: 2750 - total flux cleaned = 0.0169444 Jy ! Component: 2800 - total flux cleaned = 0.0168308 Jy ! Component: 2850 - total flux cleaned = 0.0169451 Jy ! Component: 2900 - total flux cleaned = 0.0164925 Jy ! Component: 2950 - total flux cleaned = 0.01627 Jy ! Component: 3000 - total flux cleaned = 0.016158 Jy ! Component: 3050 - total flux cleaned = 0.0163773 Jy ! Component: 3100 - total flux cleaned = 0.0159409 Jy ! Component: 3150 - total flux cleaned = 0.0158325 Jy ! Component: 3200 - total flux cleaned = 0.0157261 Jy ! Component: 3250 - total flux cleaned = 0.0159402 Jy ! Component: 3300 - total flux cleaned = 0.0156222 Jy ! Component: 3350 - total flux cleaned = 0.0154119 Jy ! Component: 3400 - total flux cleaned = 0.0155153 Jy ! Component: 3450 - total flux cleaned = 0.0153069 Jy ! Component: 3500 - total flux cleaned = 0.0147913 Jy ! Component: 3550 - total flux cleaned = 0.0145866 Jy ! Component: 3600 - total flux cleaned = 0.0145867 Jy ! Component: 3650 - total flux cleaned = 0.0143844 Jy ! Component: 3700 - total flux cleaned = 0.0140844 Jy ! Component: 3750 - total flux cleaned = 0.0137854 Jy ! Component: 3800 - total flux cleaned = 0.013786 Jy ! Component: 3850 - total flux cleaned = 0.0136869 Jy ! Component: 3900 - total flux cleaned = 0.0132957 Jy ! Component: 3950 - total flux cleaned = 0.0130047 Jy ! Component: 4000 - total flux cleaned = 0.0129091 Jy ! Component: 4050 - total flux cleaned = 0.0125259 Jy ! Total flux subtracted in 4096 components = 0.0120512 Jy ! Clean residual min=-0.005544 max=0.005792 Jy/beam ! Clean residual mean=0.000008 rms=0.001993 Jy/beam ! Combined flux in latest and established models = 0.251313 Jy keep ! Adding 377 model components to the UV plane model. ! The established model now contains 462 components and 0.251313 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0603+2159_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.575 x 7.905 at -5.999 degrees (North through East) ! Clean map min=-0.013436 max=0.12183 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0603+2159_S_map.fits wmodel /vlbi/uf001/uva//J0603+2159_S_map.mod ! Writing 462 model components to file: /vlbi/uf001/uva//J0603+2159_S_map.mod wobs /vlbi/uf001/uva//J0603+2159_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0603+2159_S_uvs.fits wwins /vlbi/uf001/uva//J0603+2159_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0603+2159_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.12183 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00197351 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.85967 4.85967 9.71933 19.4387 38.8773 77.7547 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0059 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.121 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 61.732 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0603+2159_S_dfm.log closed on Sun Jan 13 22:48:51 2019