! Started logfile: /vlbi/uf001/uvm//J0603+1742_X_a_dfm.log on Sun Jan 13 20:54:06 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0603+1742_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0603+1742_X_a_uvm.fits ! AN table 1: 12 integrations on 36 of 36 possible baselines. ! AN table 2: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.771701 visibilities/baseline/integration-bin. ! Found source: J0603+1742 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 10668 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0603+1742_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.046122Jy sigma=21.999302 ! Fit after self-cal, rms=0.705472Jy sigma=14.744272 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.694 mas, bmaj=1.638 mas, bpa=-5.357 degrees ! Estimated noise=0.476291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.228535 Jy ! Component: 100 - total flux cleaned = 0.281872 Jy ! Total flux subtracted in 100 components = 0.281872 Jy ! Clean residual min=-0.007946 max=0.019902 Jy/beam ! Clean residual mean=0.000006 rms=0.001919 Jy/beam ! Combined flux in latest and established models = 0.281872 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.281872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088227Jy sigma=1.817162 ! Fit after self-cal, rms=0.088169Jy sigma=1.816044 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211355 Jy ! Component: 100 - total flux cleaned = 0.0331158 Jy ! Total flux subtracted in 100 components = 0.0331158 Jy ! Clean residual min=-0.007563 max=0.010679 Jy/beam ! Clean residual mean=0.000004 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.314988 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 0.314988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081190Jy sigma=1.649752 ! Fit after self-cal, rms=0.081106Jy sigma=1.648304 ! Inverting map ! Added new window around map position (1, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108606 Jy ! Component: 100 - total flux cleaned = 0.0180537 Jy ! Total flux subtracted in 100 components = 0.0180537 Jy ! Clean residual min=-0.007228 max=0.009952 Jy/beam ! Clean residual mean=0.000004 rms=0.001587 Jy/beam ! Combined flux in latest and established models = 0.333042 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 38 components and 0.333042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078760Jy sigma=1.593098 ! Fit after self-cal, rms=0.078606Jy sigma=1.590341 ! Inverting map ! Added new window around map position (-2, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00863504 Jy ! Component: 100 - total flux cleaned = 0.0141544 Jy ! Total flux subtracted in 100 components = 0.0141544 Jy ! Clean residual min=-0.006976 max=0.008241 Jy/beam ! Clean residual mean=0.000003 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 0.347196 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.347196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077329Jy sigma=1.557047 ! Fit after self-cal, rms=0.077255Jy sigma=1.555701 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8557 mas, bmaj=1.929 mas, bpa=-4.242 degrees ! Estimated noise=0.330478 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00863509 Jy ! Component: 100 - total flux cleaned = 0.0146553 Jy ! Component: 150 - total flux cleaned = 0.0191961 Jy ! Component: 200 - total flux cleaned = 0.0227353 Jy ! Total flux subtracted in 200 components = 0.0227353 Jy ! Clean residual min=-0.006916 max=0.008612 Jy/beam ! Clean residual mean=0.000028 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 0.369931 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 64 components and 0.369931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076154Jy sigma=1.525547 ! Fit after self-cal, rms=0.076086Jy sigma=1.524223 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8557 x 1.929 at -4.242 degrees (North through East) ! Clean map min=-0.0065551 max=0.29281 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.95 LA 1.03 ! MK 1.06 NL 1.19 OV 0.96 PT 1.01 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.00 HN 0.89 KP 1.02 ! LA 0.83 MK 0.99 NL 1.10 OV 0.93 ! PT 1.04 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.98 LA 1.04 ! MK 1.01 NL 1.13 OV 0.96 PT 1.01 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.99 HN 0.90 KP 1.00 ! LA 0.83 MK 1.01 NL 1.11 OV 0.93 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.04 HN 0.97 LA 1.04 ! MK 1.04 NL 1.14 OV 0.98 PT 1.01 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.97 HN 0.91 KP 1.02 ! LA 0.82 MK 1.02 NL 1.11 OV 0.94 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.04 HN 0.99 LA 1.03 ! MK 1.03 NL 1.16 OV 0.97 PT 1.02 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.02 HN 0.88 KP 1.00 ! LA 0.84 MK 0.97 NL 1.09 OV 0.93 ! PT 1.05 SC 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.05 HN 0.98 LA 1.01 ! MK 1.04 NL 1.17 OV 0.99 PT 1.00 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.02 HN 0.88 KP 1.02 ! LA 0.83 MK 1.00 NL 1.12 OV 0.92 ! PT 1.05 SC 0.94 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.07 HN 1.01 LA 1.02 ! MK 1.01 NL 1.17 OV 1.01 PT 1.00 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.00 HN 0.92 KP 1.01 ! LA 0.84 MK 0.99 NL 1.10 OV 0.92 ! PT 1.05 SC 0.93 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.01 HN 0.96 LA 1.05 ! MK 1.03 NL 1.16 OV 0.99 PT 1.03 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.01 HN 0.90 KP 1.01 ! LA 0.83 MK 0.98 NL 1.11 OV 0.92 ! PT 1.02 SC 0.92 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 HN 0.96 LA 1.05 ! MK 1.07 NL 1.16 OV 0.98 PT 1.05 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.00 HN 0.92 KP 1.02 ! LA 0.81 MK 1.01 NL 1.10 OV 0.92 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 0.99 LA 1.06 ! MK 1.08 NL 1.16 OV 0.99 PT 1.03 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 1.01 HN 0.92 KP 1.01 ! LA 0.82 MK 0.99 NL 1.12 OV 0.92 ! PT 1.03 SC 0.90 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.11 HN 1.03 LA 1.01 ! MK 1.06 NL 1.20 OV 0.96 PT 1.00 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.00 HN 0.92 KP 1.02 ! LA 0.82 MK 1.01 NL 1.11 OV 0.93 ! PT 1.01 SC 0.92 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.05 HN 1.01 LA 1.01 ! MK 1.08 NL 1.19 OV 0.99 PT 1.03 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.02 HN 0.90 KP 1.00 ! LA 0.84 MK 1.03 NL 1.12 OV 0.92 ! PT 1.00 SC 0.92 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.07 HN 0.98 LA 1.06 ! MK 1.01 NL 1.20 OV 0.99 PT 1.03 ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.01 HN 0.90 KP 1.02 ! LA 0.82 MK 1.02 NL 1.14 OV 0.94 ! PT 1.05 SC 0.92 ! ! ! Fit before self-cal, rms=0.076086Jy sigma=1.524223 ! Fit after self-cal, rms=0.066887Jy sigma=1.287492 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8567 mas, bmaj=1.946 mas, bpa=-3.952 degrees ! Estimated noise=0.330313 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00429556 Jy ! Component: 100 - total flux cleaned = -0.00512762 Jy ! Component: 150 - total flux cleaned = -0.0059608 Jy ! Component: 200 - total flux cleaned = -0.00648789 Jy ! Total flux subtracted in 200 components = -0.00648789 Jy ! Clean residual min=-0.004006 max=0.004303 Jy/beam ! Clean residual mean=0.000018 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.363443 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.363443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066353Jy sigma=1.275591 ! Fit after self-cal, rms=0.066358Jy sigma=1.273980 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066358Jy sigma=1.273980 ! Fit after self-cal, rms=0.061784Jy sigma=1.143430 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8571 mas, bmaj=1.942 mas, bpa=-3.997 degrees ! Estimated noise=0.33009 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119896 Jy ! Component: 100 - total flux cleaned = -0.00151245 Jy ! Component: 150 - total flux cleaned = -0.00181861 Jy ! Component: 200 - total flux cleaned = -0.00207932 Jy ! Total flux subtracted in 200 components = -0.00207932 Jy ! Clean residual min=-0.001841 max=0.002505 Jy/beam ! Clean residual mean=0.000003 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.361364 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 88 components and 0.361364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061653Jy sigma=1.140487 ! Fit after self-cal, rms=0.061704Jy sigma=1.139813 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266208 Jy ! Component: 100 - total flux cleaned = 0.00367761 Jy ! Component: 150 - total flux cleaned = 0.00382867 Jy ! Component: 200 - total flux cleaned = 0.00382986 Jy ! Total flux subtracted in 200 components = 0.00382986 Jy ! Clean residual min=-0.001768 max=0.002234 Jy/beam ! Clean residual mean=0.000003 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.365194 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 97 components and 0.365194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061570Jy sigma=1.136473 ! Fit after self-cal, rms=0.061554Jy sigma=1.136209 ! Inverting map ! Added new window around map position (2.2, 10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132982 Jy ! Component: 100 - total flux cleaned = 0.00153091 Jy ! Component: 150 - total flux cleaned = 0.00170191 Jy ! Component: 200 - total flux cleaned = 0.00174083 Jy ! Total flux subtracted in 200 components = 0.00174083 Jy ! Clean residual min=-0.001672 max=0.001939 Jy/beam ! Clean residual mean=0.000003 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.366935 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 111 components and 0.366935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061464Jy sigma=1.134532 ! Fit after self-cal, rms=0.061454Jy sigma=1.134426 ! Inverting map ! Added new window around map position (-39.8, -39.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000594264 Jy ! Component: 100 - total flux cleaned = 0.000726942 Jy ! Component: 150 - total flux cleaned = 0.000999873 Jy ! Component: 200 - total flux cleaned = 0.00107213 Jy ! Total flux subtracted in 200 components = 0.00107213 Jy ! Clean residual min=-0.001639 max=0.001627 Jy/beam ! Clean residual mean=0.000003 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.368007 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 121 components and 0.368007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061382Jy sigma=1.132905 ! Fit after self-cal, rms=0.061377Jy sigma=1.132818 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061377Jy sigma=1.132818 ! Fit after self-cal, rms=0.061397Jy sigma=1.131470 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8561 mas, bmaj=1.942 mas, bpa=-3.98 degrees ! Estimated noise=0.329889 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.73922e-05 Jy ! Component: 100 - total flux cleaned = 0.000356238 Jy ! Component: 150 - total flux cleaned = 0.00039628 Jy ! Component: 200 - total flux cleaned = 0.00046325 Jy ! Total flux subtracted in 200 components = 0.00046325 Jy ! Clean residual min=-0.001536 max=0.001565 Jy/beam ! Clean residual mean=0.000002 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.36847 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 129 components and 0.36847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061345Jy sigma=1.130323 ! Fit after self-cal, rms=0.061344Jy sigma=1.130254 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.47699e-05 Jy ! Component: 100 - total flux cleaned = -9.28579e-05 Jy ! Component: 150 - total flux cleaned = -5.18161e-06 Jy ! Component: 200 - total flux cleaned = -3.43312e-05 Jy ! Total flux subtracted in 200 components = -3.43312e-05 Jy ! Clean residual min=-0.001544 max=0.001519 Jy/beam ! Clean residual mean=0.000002 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.368436 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 137 components and 0.368436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061315Jy sigma=1.129639 ! Fit after self-cal, rms=0.061313Jy sigma=1.129601 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061313Jy sigma=1.129601 ! Fit after self-cal, rms=0.061326Jy sigma=1.129461 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.034 mas, bmaj=2.913 mas, bpa=-3.164 degrees ! Estimated noise=0.423819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289958 Jy ! Component: 100 - total flux cleaned = 0.000360196 Jy ! Component: 150 - total flux cleaned = 0.000514172 Jy ! Component: 200 - total flux cleaned = 0.000700265 Jy ! Total flux subtracted in 200 components = 0.000700265 Jy ! Clean residual min=-0.001887 max=0.001820 Jy/beam ! Clean residual mean=0.000006 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.369136 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 156 components and 0.369136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061319Jy sigma=1.129139 ! Fit after self-cal, rms=0.061316Jy sigma=1.129084 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108883 Jy ! Component: 100 - total flux cleaned = 0.000276326 Jy ! Component: 150 - total flux cleaned = 0.000423972 Jy ! Component: 200 - total flux cleaned = 0.000499628 Jy ! Total flux subtracted in 200 components = 0.000499628 Jy ! Clean residual min=-0.001823 max=0.001810 Jy/beam ! Clean residual mean=0.000006 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.369636 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 167 components and 0.369636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061314Jy sigma=1.129012 ! Fit after self-cal, rms=0.061312Jy sigma=1.128985 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8558 mas, bmaj=1.942 mas, bpa=-3.967 degrees ! Estimated noise=0.329876 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8558 x 1.942 at -3.967 degrees (North through East) ! Clean map min=-0.0015363 max=0.29264 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6931 mas, bmaj=1.644 mas, bpa=-5.083 degrees ! Estimated noise=0.474386 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.227325 Jy ! Component: 100 - total flux cleaned = 0.283041 Jy ! Component: 150 - total flux cleaned = 0.305891 Jy ! Component: 200 - total flux cleaned = 0.318585 Jy ! Total flux subtracted in 200 components = 0.318585 Jy ! Clean residual min=-0.003297 max=0.006836 Jy/beam ! Clean residual mean=0.000002 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.318585 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.318585 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8558 mas, bmaj=1.942 mas, bpa=-3.967 degrees ! Estimated noise=0.329876 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129045 Jy ! Component: 100 - total flux cleaned = 0.0210525 Jy ! Component: 150 - total flux cleaned = 0.0265161 Jy ! Component: 200 - total flux cleaned = 0.0304871 Jy ! Total flux subtracted in 200 components = 0.0304871 Jy ! Clean residual min=-0.002138 max=0.002331 Jy/beam ! Clean residual mean=0.000006 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.349072 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 62 components and 0.349072 Jy ! Inverting map ! Added new window around map position (-0.6, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311855 Jy ! Component: 100 - total flux cleaned = 0.00573937 Jy ! Component: 150 - total flux cleaned = 0.00754791 Jy ! Component: 200 - total flux cleaned = 0.008898 Jy ! Total flux subtracted in 200 components = 0.008898 Jy ! Clean residual min=-0.001771 max=0.001869 Jy/beam ! Clean residual mean=0.000004 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.35797 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 87 components and 0.35797 Jy ! Inverting map ! Added new window around map position (-6.6, -43.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015129 Jy ! Component: 100 - total flux cleaned = 0.00262823 Jy ! Component: 150 - total flux cleaned = 0.00346812 Jy ! Component: 200 - total flux cleaned = 0.00424231 Jy ! Total flux subtracted in 200 components = 0.00424231 Jy ! Clean residual min=-0.001601 max=0.001575 Jy/beam ! Clean residual mean=0.000004 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.362213 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 108 components and 0.362213 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.034 mas, bmaj=2.913 mas, bpa=-3.164 degrees ! Estimated noise=0.423819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209063 Jy ! Component: 100 - total flux cleaned = 0.00359507 Jy ! Component: 150 - total flux cleaned = 0.00432744 Jy ! Component: 200 - total flux cleaned = 0.00482917 Jy ! Total flux subtracted in 200 components = 0.00482917 Jy ! Clean residual min=-0.001877 max=0.001833 Jy/beam ! Clean residual mean=0.000007 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.367042 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000366873 Jy ! Component: 100 - total flux cleaned = 0.000766157 Jy ! Component: 150 - total flux cleaned = 0.0011609 Jy ! Component: 200 - total flux cleaned = 0.00146636 Jy ! Total flux subtracted in 200 components = 0.00146636 Jy ! Clean residual min=-0.001816 max=0.001744 Jy/beam ! Clean residual mean=0.000007 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.368508 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 154 components and 0.368508 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8558 mas, bmaj=1.942 mas, bpa=-3.967 degrees ! Estimated noise=0.329876 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00036414 Jy ! Component: 100 - total flux cleaned = 0.000444439 Jy ! Component: 150 - total flux cleaned = 0.000556692 Jy ! Component: 200 - total flux cleaned = 0.000590841 Jy ! Total flux subtracted in 200 components = 0.000590841 Jy ! Clean residual min=-0.001569 max=0.001413 Jy/beam ! Clean residual mean=0.000003 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.369099 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 171 components and 0.369099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061290Jy sigma=1.128729 ! Fit after self-cal, rms=0.061261Jy sigma=1.128139 wmodel J0603+1742_X_a_map.mod ! Writing 171 model components to file: J0603+1742_X_a_map.mod wobs J0603+1742_X_a_uvs.fits ! Writing UV FITS file: J0603+1742_X_a_uvs.fits wwins J0603+1742_X_a_map.win ! wwins: Wrote 8 windows to J0603+1742_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000620164 Jy ! Component: 100 - total flux cleaned = -0.000803708 Jy ! Component: 150 - total flux cleaned = -0.000878863 Jy ! Component: 200 - total flux cleaned = -0.000975947 Jy ! Component: 250 - total flux cleaned = -0.00107088 Jy ! Component: 300 - total flux cleaned = -0.00109425 Jy ! Component: 350 - total flux cleaned = -0.00116321 Jy ! Component: 400 - total flux cleaned = -0.00127583 Jy ! Component: 450 - total flux cleaned = -0.00136441 Jy ! Component: 500 - total flux cleaned = -0.00140813 Jy ! Component: 550 - total flux cleaned = -0.00149433 Jy ! Component: 600 - total flux cleaned = -0.00157944 Jy ! Component: 650 - total flux cleaned = -0.00164267 Jy ! Component: 700 - total flux cleaned = -0.00172551 Jy ! Component: 750 - total flux cleaned = -0.00180767 Jy ! Component: 800 - total flux cleaned = -0.00192953 Jy ! Component: 850 - total flux cleaned = -0.00194944 Jy ! Component: 900 - total flux cleaned = -0.00204914 Jy ! Component: 950 - total flux cleaned = -0.0020492 Jy ! Component: 1000 - total flux cleaned = -0.00218648 Jy ! Component: 1050 - total flux cleaned = -0.00220579 Jy ! Component: 1100 - total flux cleaned = -0.00228291 Jy ! Component: 1150 - total flux cleaned = -0.00234008 Jy ! Component: 1200 - total flux cleaned = -0.00233994 Jy ! Component: 1250 - total flux cleaned = -0.00247155 Jy ! Component: 1300 - total flux cleaned = -0.00247131 Jy ! Component: 1350 - total flux cleaned = -0.00250844 Jy ! Component: 1400 - total flux cleaned = -0.00254536 Jy ! Component: 1450 - total flux cleaned = -0.00254516 Jy ! Component: 1500 - total flux cleaned = -0.00259956 Jy ! Component: 1550 - total flux cleaned = -0.00261751 Jy ! Component: 1600 - total flux cleaned = -0.00263538 Jy ! Component: 1650 - total flux cleaned = -0.00272435 Jy ! Component: 1700 - total flux cleaned = -0.00270643 Jy ! Component: 1750 - total flux cleaned = -0.00279434 Jy ! Component: 1800 - total flux cleaned = -0.00277696 Jy ! Component: 1850 - total flux cleaned = -0.00289878 Jy ! Component: 1900 - total flux cleaned = -0.00288157 Jy ! Component: 1950 - total flux cleaned = -0.0029675 Jy ! Component: 2000 - total flux cleaned = -0.00308732 Jy ! Component: 2050 - total flux cleaned = -0.00312127 Jy ! Component: 2100 - total flux cleaned = -0.00312147 Jy ! Component: 2150 - total flux cleaned = -0.00313846 Jy ! Component: 2200 - total flux cleaned = -0.00325551 Jy ! Component: 2250 - total flux cleaned = -0.0032555 Jy ! Component: 2300 - total flux cleaned = -0.0032887 Jy ! Component: 2350 - total flux cleaned = -0.00337106 Jy ! Component: 2400 - total flux cleaned = -0.00333831 Jy ! Component: 2450 - total flux cleaned = -0.00337085 Jy ! Component: 2500 - total flux cleaned = -0.0034846 Jy ! Component: 2550 - total flux cleaned = -0.00346858 Jy ! Component: 2600 - total flux cleaned = -0.00346861 Jy ! Component: 2650 - total flux cleaned = -0.0035648 Jy ! Component: 2700 - total flux cleaned = -0.00348505 Jy ! Component: 2750 - total flux cleaned = -0.00353268 Jy ! Component: 2800 - total flux cleaned = -0.00351687 Jy ! Component: 2850 - total flux cleaned = -0.0035482 Jy ! Component: 2900 - total flux cleaned = -0.00353255 Jy ! Component: 2950 - total flux cleaned = -0.0035948 Jy ! Component: 3000 - total flux cleaned = -0.00356373 Jy ! Component: 3050 - total flux cleaned = -0.00354824 Jy ! Component: 3100 - total flux cleaned = -0.00357906 Jy ! Component: 3150 - total flux cleaned = -0.00362506 Jy ! Component: 3200 - total flux cleaned = -0.00365558 Jy ! Component: 3250 - total flux cleaned = -0.00357969 Jy ! Component: 3300 - total flux cleaned = -0.0036251 Jy ! Component: 3350 - total flux cleaned = -0.00364021 Jy ! Component: 3400 - total flux cleaned = -0.00367021 Jy ! Component: 3450 - total flux cleaned = -0.00362524 Jy ! Component: 3500 - total flux cleaned = -0.00362521 Jy ! Component: 3550 - total flux cleaned = -0.00364007 Jy ! Component: 3600 - total flux cleaned = -0.00359589 Jy ! Component: 3650 - total flux cleaned = -0.00365465 Jy ! Component: 3700 - total flux cleaned = -0.0035815 Jy ! Component: 3750 - total flux cleaned = -0.00363995 Jy ! Component: 3800 - total flux cleaned = -0.00366892 Jy ! Component: 3850 - total flux cleaned = -0.00363995 Jy ! Component: 3900 - total flux cleaned = -0.0036399 Jy ! Component: 3950 - total flux cleaned = -0.00365427 Jy ! Component: 4000 - total flux cleaned = -0.00363988 Jy ! Component: 4050 - total flux cleaned = -0.00366853 Jy ! Total flux subtracted in 4096 components = -0.00368283 Jy ! Clean residual min=-0.000833 max=0.000862 Jy/beam ! Clean residual mean=0.000002 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.365416 Jy keep ! Adding 380 model components to the UV plane model. ! The established model now contains 551 components and 0.365416 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0603+1742_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8558 x 1.942 at -3.967 degrees (North through East) ! Clean map min=-0.0014148 max=0.2926 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0603+1742_X_a_map.fits wmodel /vlbi/uf001/uvm//J0603+1742_X_a_map.mod ! Writing 551 model components to file: /vlbi/uf001/uvm//J0603+1742_X_a_map.mod wobs /vlbi/uf001/uvm//J0603+1742_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0603+1742_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0603+1742_X_a_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uvm//J0603+1742_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.292605 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000252287 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.258663 0.258663 0.517326 1.03465 2.0693 4.13861 8.27722 16.5544 33.1089 66.2177 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.292 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1159.81 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0603+1742_X_a_dfm.log closed on Sun Jan 13 20:54:12 2019