! Started logfile: /vlbi/uf001/uvm//J0602-0004_S_a_dfm.log on Sun Jan 13 20:53:47 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uvm//J0602-0004_S_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0602-0004_S_a_uvm.fits ! AN table 1: 110 integrations on 21 of 21 possible baselines. ! AN table 2: 73 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.896956 visibilities/baseline/integration-bin. ! Found source: J0602-0004 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 10341 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0602-0004_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 79 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.001655Jy sigma=20.899095 ! Fit after self-cal, rms=0.963222Jy sigma=20.100938 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.323 mas, bmaj=17.68 mas, bpa=-13.12 degrees ! Estimated noise=0.519383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030001 Jy ! Component: 100 - total flux cleaned = 0.036608 Jy ! Total flux subtracted in 100 components = 0.036608 Jy ! Clean residual min=-0.002705 max=0.003007 Jy/beam ! Clean residual mean=0.000001 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.036608 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.036608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059344Jy sigma=1.182931 ! Fit after self-cal, rms=0.057759Jy sigma=1.150569 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.779 mas, bmaj=19.82 mas, bpa=-14.24 degrees ! Estimated noise=0.340134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040253 Jy ! Component: 100 - total flux cleaned = 0.00589722 Jy ! Component: 150 - total flux cleaned = 0.0062576 Jy ! Component: 200 - total flux cleaned = 0.00638874 Jy ! Total flux subtracted in 200 components = 0.00638874 Jy ! Clean residual min=-0.002155 max=0.002292 Jy/beam ! Clean residual mean=0.000001 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0429967 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 33 components and 0.0429967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057483Jy sigma=1.144816 ! Fit after self-cal, rms=0.057440Jy sigma=1.144194 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.779 x 19.82 at -14.24 degrees (North through East) ! Clean map min=-0.0021895 max=0.041109 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.07 HN 1.07 KP 1.02 LA 0.84 ! NL 1.14 OV 1.06 PT 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.03 HN 0.99 KP 0.89 ! LA 0.88 NL 1.25 PT 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 HN 1.03 KP 0.99 LA 0.89 ! NL 1.04 OV 1.04 PT 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.98 HN 1.04 KP 0.92 ! LA 0.99 NL 0.57 PT 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.03 KP 1.07 LA 1.05 ! NL 0.93 OV 0.98 PT 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.01 HN 0.85 KP 1.01 ! LA 1.08 NL 0.94 PT 0.93 ! ! ! Fit before self-cal, rms=0.057440Jy sigma=1.144194 ! Fit after self-cal, rms=0.056244Jy sigma=1.135066 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.816 mas, bmaj=19.7 mas, bpa=-14.35 degrees ! Estimated noise=0.336386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117654 Jy ! Component: 100 - total flux cleaned = 0.00141607 Jy ! Component: 150 - total flux cleaned = 0.00145921 Jy ! Component: 200 - total flux cleaned = 0.00148246 Jy ! Total flux subtracted in 200 components = 0.00148246 Jy ! Clean residual min=-0.001621 max=0.002275 Jy/beam ! Clean residual mean=-0.000002 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0444792 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.0444792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056217Jy sigma=1.134555 ! Fit after self-cal, rms=0.056477Jy sigma=1.131429 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056477Jy sigma=1.131429 ! Fit after self-cal, rms=0.057557Jy sigma=1.127295 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.843 mas, bmaj=19.7 mas, bpa=-14.56 degrees ! Estimated noise=0.336835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107312 Jy ! Component: 100 - total flux cleaned = 0.00153665 Jy ! Component: 150 - total flux cleaned = 0.0016461 Jy ! Component: 200 - total flux cleaned = 0.00172407 Jy ! Total flux subtracted in 200 components = 0.00172407 Jy ! Clean residual min=-0.001712 max=0.002281 Jy/beam ! Clean residual mean=0.000001 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0462032 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 71 components and 0.0462032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057531Jy sigma=1.126879 ! Fit after self-cal, rms=0.057732Jy sigma=1.125531 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, -33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233075 Jy ! Component: 100 - total flux cleaned = 0.00368727 Jy ! Component: 150 - total flux cleaned = 0.00461846 Jy ! Component: 200 - total flux cleaned = 0.00532022 Jy ! Total flux subtracted in 200 components = 0.00532022 Jy ! Clean residual min=-0.001325 max=0.001089 Jy/beam ! Clean residual mean=0.000001 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0515234 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 125 components and 0.0515234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057617Jy sigma=1.123492 ! Fit after self-cal, rms=0.057583Jy sigma=1.122208 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057583Jy sigma=1.122208 ! Fit after self-cal, rms=0.057867Jy sigma=1.121464 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.861 mas, bmaj=19.71 mas, bpa=-14.71 degrees ! Estimated noise=0.333772 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147699 Jy ! Component: 100 - total flux cleaned = 0.00242109 Jy ! Component: 150 - total flux cleaned = 0.00301705 Jy ! Component: 200 - total flux cleaned = 0.00351493 Jy ! Total flux subtracted in 200 components = 0.00351493 Jy ! Clean residual min=-0.001147 max=0.001064 Jy/beam ! Clean residual mean=0.000001 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.0550384 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 160 components and 0.0550384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057812Jy sigma=1.120559 ! Fit after self-cal, rms=0.057920Jy sigma=1.119761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104122 Jy ! Component: 100 - total flux cleaned = 0.00177187 Jy ! Component: 150 - total flux cleaned = 0.00228986 Jy ! Component: 200 - total flux cleaned = 0.00271134 Jy ! Total flux subtracted in 200 components = 0.00271134 Jy ! Clean residual min=-0.001132 max=0.001065 Jy/beam ! Clean residual mean=0.000000 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.0577497 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 185 components and 0.0577497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057888Jy sigma=1.119317 ! Fit after self-cal, rms=0.057874Jy sigma=1.118767 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.057874Jy sigma=1.118767 ! Fit after self-cal, rms=0.058145Jy sigma=1.118522 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.386 mas, bmaj=19.78 mas, bpa=-16.69 degrees ! Estimated noise=0.358654 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106179 Jy ! Component: 100 - total flux cleaned = 0.00174507 Jy ! Component: 150 - total flux cleaned = 0.00222251 Jy ! Component: 200 - total flux cleaned = 0.002644 Jy ! Total flux subtracted in 200 components = 0.002644 Jy ! Clean residual min=-0.001137 max=0.001042 Jy/beam ! Clean residual mean=0.000001 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.0603937 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 232 components and 0.0603937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058119Jy sigma=1.118178 ! Fit after self-cal, rms=0.058196Jy sigma=1.117852 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000727018 Jy ! Component: 100 - total flux cleaned = 0.00120269 Jy ! Component: 150 - total flux cleaned = 0.00161618 Jy ! Component: 200 - total flux cleaned = 0.00187812 Jy ! Total flux subtracted in 200 components = 0.00187812 Jy ! Clean residual min=-0.001117 max=0.001039 Jy/beam ! Clean residual mean=-0.000000 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.0622718 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 266 components and 0.0622718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058179Jy sigma=1.117655 ! Fit after self-cal, rms=0.058155Jy sigma=1.117054 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=5.879 mas, bmaj=19.73 mas, bpa=-14.8 degrees ! Estimated noise=0.332143 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.879 x 19.73 at -14.8 degrees (North through East) ! Clean map min=-0.0010448 max=0.040815 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.43 mas, bmaj=17.56 mas, bpa=-13.6 degrees ! Estimated noise=0.509692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0303976 Jy ! Component: 100 - total flux cleaned = 0.0375328 Jy ! Component: 150 - total flux cleaned = 0.04148 Jy ! Component: 200 - total flux cleaned = 0.0445579 Jy ! Total flux subtracted in 200 components = 0.0445579 Jy ! Clean residual min=-0.002495 max=0.002798 Jy/beam ! Clean residual mean=0.000004 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.044558 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.044558 Jy ! Inverting map and beam ! Estimated beam: bmin=5.879 mas, bmaj=19.73 mas, bpa=-14.8 degrees ! Estimated noise=0.332143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040465 Jy ! Component: 100 - total flux cleaned = 0.00672523 Jy ! Component: 150 - total flux cleaned = 0.0087682 Jy ! Component: 200 - total flux cleaned = 0.0104368 Jy ! Total flux subtracted in 200 components = 0.0104368 Jy ! Clean residual min=-0.001697 max=0.001419 Jy/beam ! Clean residual mean=0.000005 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.0549948 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 83 components and 0.0549948 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.386 mas, bmaj=19.78 mas, bpa=-16.69 degrees ! Estimated noise=0.358654 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170898 Jy ! Component: 100 - total flux cleaned = 0.00308413 Jy ! Component: 150 - total flux cleaned = 0.00423293 Jy ! Component: 200 - total flux cleaned = 0.00519926 Jy ! Total flux subtracted in 200 components = 0.00519926 Jy ! Clean residual min=-0.001252 max=0.001052 Jy/beam ! Clean residual mean=0.000003 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.060194 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000722384 Jy ! Component: 100 - total flux cleaned = 0.00129251 Jy ! Component: 150 - total flux cleaned = 0.00174593 Jy ! Component: 200 - total flux cleaned = 0.00214689 Jy ! Total flux subtracted in 200 components = 0.00214689 Jy ! Clean residual min=-0.001056 max=0.000894 Jy/beam ! Clean residual mean=0.000001 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.0623409 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 163 components and 0.0623409 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.879 mas, bmaj=19.73 mas, bpa=-14.8 degrees ! Estimated noise=0.332143 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.62429e-05 Jy ! Component: 100 - total flux cleaned = 0.000300228 Jy ! Component: 150 - total flux cleaned = 0.00053664 Jy ! Component: 200 - total flux cleaned = 0.000724376 Jy ! Total flux subtracted in 200 components = 0.000724376 Jy ! Clean residual min=-0.001060 max=0.000980 Jy/beam ! Clean residual mean=0.000000 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.0630653 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 194 components and 0.0630653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.058145Jy sigma=1.117012 ! Fit after self-cal, rms=0.058126Jy sigma=1.116836 wmodel J0602-0004_S_a_map.mod ! Writing 194 model components to file: J0602-0004_S_a_map.mod wobs J0602-0004_S_a_uvs.fits ! Writing UV FITS file: J0602-0004_S_a_uvs.fits wwins J0602-0004_S_a_map.win ! wwins: Wrote 2 windows to J0602-0004_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000284552 Jy ! Component: 100 - total flux cleaned = -0.000544679 Jy ! Component: 150 - total flux cleaned = -0.000722725 Jy ! Component: 200 - total flux cleaned = -0.000845015 Jy ! Component: 250 - total flux cleaned = -0.000918309 Jy ! Component: 300 - total flux cleaned = -0.000989363 Jy ! Component: 350 - total flux cleaned = -0.0010717 Jy ! Component: 400 - total flux cleaned = -0.00108506 Jy ! Component: 450 - total flux cleaned = -0.00114962 Jy ! Component: 500 - total flux cleaned = -0.00117444 Jy ! Component: 550 - total flux cleaned = -0.00121065 Jy ! Component: 600 - total flux cleaned = -0.00126996 Jy ! Component: 650 - total flux cleaned = -0.00136225 Jy ! Component: 700 - total flux cleaned = -0.00142963 Jy ! Component: 750 - total flux cleaned = -0.00150658 Jy ! Component: 800 - total flux cleaned = -0.00154988 Jy ! Component: 850 - total flux cleaned = -0.00162414 Jy ! Component: 900 - total flux cleaned = -0.00169685 Jy ! Component: 950 - total flux cleaned = -0.00175765 Jy ! Component: 1000 - total flux cleaned = -0.00180717 Jy ! Component: 1050 - total flux cleaned = -0.00188473 Jy ! Component: 1100 - total flux cleaned = -0.00192281 Jy ! Component: 1150 - total flux cleaned = -0.00197912 Jy ! Component: 1200 - total flux cleaned = -0.0020528 Jy ! Component: 1250 - total flux cleaned = -0.00211602 Jy ! Component: 1300 - total flux cleaned = -0.00216965 Jy ! Component: 1350 - total flux cleaned = -0.00225742 Jy ! Component: 1400 - total flux cleaned = -0.00231777 Jy ! Component: 1450 - total flux cleaned = -0.00241988 Jy ! Component: 1500 - total flux cleaned = -0.0024617 Jy ! Component: 1550 - total flux cleaned = -0.00251124 Jy ! Component: 1600 - total flux cleaned = -0.00261703 Jy ! Component: 1650 - total flux cleaned = -0.00266501 Jy ! Component: 1700 - total flux cleaned = -0.00271251 Jy ! Component: 1750 - total flux cleaned = -0.00278281 Jy ! Component: 1800 - total flux cleaned = -0.00285995 Jy ! Component: 1850 - total flux cleaned = -0.00294366 Jy ! Component: 1900 - total flux cleaned = -0.00301113 Jy ! Component: 1950 - total flux cleaned = -0.00308517 Jy ! Component: 2000 - total flux cleaned = -0.00315833 Jy ! Component: 2050 - total flux cleaned = -0.00323073 Jy ! Component: 2100 - total flux cleaned = -0.00332359 Jy ! Component: 2150 - total flux cleaned = -0.00340117 Jy ! Component: 2200 - total flux cleaned = -0.003457 Jy ! Component: 2250 - total flux cleaned = -0.00351916 Jy ! Component: 2300 - total flux cleaned = -0.0035873 Jy ! Component: 2350 - total flux cleaned = -0.00363457 Jy ! Component: 2400 - total flux cleaned = -0.00369469 Jy ! Component: 2450 - total flux cleaned = -0.00378716 Jy ! Component: 2500 - total flux cleaned = -0.0038264 Jy ! Component: 2550 - total flux cleaned = -0.00392987 Jy ! Component: 2600 - total flux cleaned = -0.0039747 Jy ! Component: 2650 - total flux cleaned = -0.00403186 Jy ! Component: 2700 - total flux cleaned = -0.00411361 Jy ! Component: 2750 - total flux cleaned = -0.00416955 Jy ! Component: 2800 - total flux cleaned = -0.00423737 Jy ! Component: 2850 - total flux cleaned = -0.00429839 Jy ! Component: 2900 - total flux cleaned = -0.00436489 Jy ! Component: 2950 - total flux cleaned = -0.00444864 Jy ! Component: 3000 - total flux cleaned = -0.00451394 Jy ! Component: 3050 - total flux cleaned = -0.00459624 Jy ! Component: 3100 - total flux cleaned = -0.00466621 Jy ! Component: 3150 - total flux cleaned = -0.00472977 Jy ! Component: 3200 - total flux cleaned = -0.00479281 Jy ! Component: 3250 - total flux cleaned = -0.00486671 Jy ! Component: 3300 - total flux cleaned = -0.00492304 Jy ! Component: 3350 - total flux cleaned = -0.00496782 Jy ! Component: 3400 - total flux cleaned = -0.00501226 Jy ! Component: 3450 - total flux cleaned = -0.00506745 Jy ! Component: 3500 - total flux cleaned = -0.0051222 Jy ! Component: 3550 - total flux cleaned = -0.00517112 Jy ! Component: 3600 - total flux cleaned = -0.00520894 Jy ! Component: 3650 - total flux cleaned = -0.00524648 Jy ! Component: 3700 - total flux cleaned = -0.00527314 Jy ! Component: 3750 - total flux cleaned = -0.00531547 Jy ! Component: 3800 - total flux cleaned = -0.00535754 Jy ! Component: 3850 - total flux cleaned = -0.0053993 Jy ! Component: 3900 - total flux cleaned = -0.00542525 Jy ! Component: 3950 - total flux cleaned = -0.00545623 Jy ! Component: 4000 - total flux cleaned = -0.00549216 Jy ! Component: 4050 - total flux cleaned = -0.00552787 Jy ! Total flux subtracted in 4096 components = -0.00556338 Jy ! Clean residual min=-0.000363 max=0.000310 Jy/beam ! Clean residual mean=-0.000001 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.0575019 Jy keep ! Adding 351 model components to the UV plane model. ! The established model now contains 545 components and 0.0575019 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0602-0004_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.879 x 19.73 at -14.8 degrees (North through East) ! Clean map min=-0.00085259 max=0.040753 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0602-0004_S_a_map.fits wmodel /vlbi/uf001/uvm//J0602-0004_S_a_map.mod ! Writing 545 model components to file: /vlbi/uf001/uvm//J0602-0004_S_a_map.mod wobs /vlbi/uf001/uvm//J0602-0004_S_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0602-0004_S_a_uvs.fits wwins /vlbi/uf001/uvm//J0602-0004_S_a_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J0602-0004_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0407528 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00010863 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.799673 0.799673 1.59935 3.19869 6.39739 12.7948 25.5895 51.1791 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.04 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 375.153 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0602-0004_S_a_dfm.log closed on Sun Jan 13 20:53:51 2019