! Started logfile: /vlbi/uf001/uvm//J0559-4529_S_b_dfm.log on Sun Jan 13 20:53:24 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0559-4529_S_b_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0559-4529_S_b_uvm.fits
! AN table 1: 74 integrations on 10 of 10 possible baselines.
! AN table 2: 37 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.984685 visibilities/baseline/integration-bin.
! Found source: J0559-4529
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3279 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0559-4529_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 13 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.046828Jy  sigma=13.845556
! Fit after  self-cal, rms=0.731588Jy  sigma=9.622604
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.556 mas, bmaj=20.18 mas, bpa=-27.11 degrees
! Estimated noise=1.3421 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.20091 Jy
! Component: 100  -  total flux cleaned = 0.272445 Jy
! Total flux subtracted in 100 components = 0.272445 Jy
! Clean residual min=-0.014802 max=0.031124 Jy/beam
! Clean residual mean=-0.000427 rms=0.006441 Jy/beam
! Combined flux in latest and established models = 0.272445 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.272445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109719Jy  sigma=1.423428
! Fit after  self-cal, rms=0.109547Jy  sigma=1.420469
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.176 mas, bmaj=24.21 mas, bpa=-27.76 degrees
! Estimated noise=0.958688 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0499875 Jy
! Component: 100  -  total flux cleaned = 0.0704636 Jy
! Component: 150  -  total flux cleaned = 0.0789902 Jy
! Component: 200  -  total flux cleaned = 0.0831314 Jy
! Total flux subtracted in 200 components = 0.0831314 Jy
! Clean residual min=-0.007925 max=0.007732 Jy/beam
! Clean residual mean=-0.000051 rms=0.002497 Jy/beam
! Combined flux in latest and established models = 0.355576 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 61 components and 0.355576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088440Jy  sigma=1.132565
! Fit after  self-cal, rms=0.088326Jy  sigma=1.131910
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.176 x 24.21 at -27.76 degrees (North through East)
! Clean map  min=-0.0076893  max=0.26571 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        1.05     LA        0.99     MK        1.00     
!   PT        1.04     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.95     KP        0.94     LA        1.00     MK        1.06     
!   OV        1.06     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     KP        1.03     LA        1.00     MK        1.00     
!   PT        1.05     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.94     KP        0.98     LA        0.96     MK        1.08     
!   OV        1.04     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        1.09     LA        0.97     MK        1.01     
!   PT        1.03     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.95     KP        0.97     LA        0.96     MK        1.05     
!   OV        1.01     
! 
! 
! Fit before self-cal, rms=0.088326Jy  sigma=1.131910
! Fit after  self-cal, rms=0.086790Jy  sigma=1.104326
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.192 mas, bmaj=24.26 mas, bpa=-27.6 degrees
! Estimated noise=0.962343 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000590712 Jy
! Component: 100  -  total flux cleaned = 0.000590032 Jy
! Component: 150  -  total flux cleaned = 0.000591166 Jy
! Component: 200  -  total flux cleaned = 0.000655043 Jy
! Total flux subtracted in 200 components = 0.000655043 Jy
! Clean residual min=-0.003478 max=0.004522 Jy/beam
! Clean residual mean=-0.000004 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.356231 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 76 components and 0.356231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086682Jy  sigma=1.102931
! Fit after  self-cal, rms=0.086765Jy  sigma=1.102731
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086765Jy  sigma=1.102731
! Fit after  self-cal, rms=0.086370Jy  sigma=1.098798
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.192 mas, bmaj=24.25 mas, bpa=-27.62 degrees
! Estimated noise=0.961429 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000101137 Jy
! Component: 100  -  total flux cleaned = 5.23267e-05 Jy
! Component: 150  -  total flux cleaned = 9.50954e-05 Jy
! Component: 200  -  total flux cleaned = 9.74827e-05 Jy
! Total flux subtracted in 200 components = 9.74827e-05 Jy
! Clean residual min=-0.003060 max=0.004279 Jy/beam
! Clean residual mean=-0.000011 rms=0.000898 Jy/beam
! Combined flux in latest and established models = 0.356329 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 82 components and 0.356329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086328Jy  sigma=1.098247
! Fit after  self-cal, rms=0.086314Jy  sigma=1.098204
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (43.5, -56.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184983 Jy
! Component: 100  -  total flux cleaned = 0.0019888 Jy
! Component: 150  -  total flux cleaned = 0.00231734 Jy
! Component: 200  -  total flux cleaned = 0.00258397 Jy
! Total flux subtracted in 200 components = 0.00258397 Jy
! Clean residual min=-0.002300 max=0.002371 Jy/beam
! Clean residual mean=-0.000017 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.358912 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 104 components and 0.358912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086144Jy  sigma=1.095880
! Fit after  self-cal, rms=0.086116Jy  sigma=1.095778
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086116Jy  sigma=1.095778
! Fit after  self-cal, rms=0.085771Jy  sigma=1.095672
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.187 mas, bmaj=24.22 mas, bpa=-27.62 degrees
! Estimated noise=0.9587 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000263188 Jy
! Component: 100  -  total flux cleaned = 0.000490379 Jy
! Component: 150  -  total flux cleaned = 0.000553093 Jy
! Component: 200  -  total flux cleaned = 0.000500856 Jy
! Total flux subtracted in 200 components = 0.000500856 Jy
! Clean residual min=-0.002181 max=0.002158 Jy/beam
! Clean residual mean=-0.000016 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.359413 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 119 components and 0.359413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085743Jy  sigma=1.095319
! Fit after  self-cal, rms=0.085734Jy  sigma=1.095309
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.6893e-05 Jy
! Component: 100  -  total flux cleaned = -0.000208687 Jy
! Component: 150  -  total flux cleaned = -0.000336792 Jy
! Component: 200  -  total flux cleaned = -0.000476171 Jy
! Total flux subtracted in 200 components = -0.000476171 Jy
! Clean residual min=-0.002164 max=0.002092 Jy/beam
! Clean residual mean=-0.000019 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.358937 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 134 components and 0.358937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085722Jy  sigma=1.095190
! Fit after  self-cal, rms=0.085716Jy  sigma=1.095188
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085716Jy  sigma=1.095188
! Fit after  self-cal, rms=0.085674Jy  sigma=1.095161
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.38 mas, bmaj=49.46 mas, bpa=-19.54 degrees
! Estimated noise=1.21681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.41893e-05 Jy
! Component: 100  -  total flux cleaned = -0.000216898 Jy
! Component: 150  -  total flux cleaned = -0.000386773 Jy
! Component: 200  -  total flux cleaned = -0.000542898 Jy
! Total flux subtracted in 200 components = -0.000542898 Jy
! Clean residual min=-0.001554 max=0.001798 Jy/beam
! Clean residual mean=-0.000034 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.358394 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 142 components and 0.358394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085668Jy  sigma=1.095112
! Fit after  self-cal, rms=0.085671Jy  sigma=1.095103
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.02853e-05 Jy
! Component: 100  -  total flux cleaned = -0.000118665 Jy
! Component: 150  -  total flux cleaned = -0.000243073 Jy
! Component: 200  -  total flux cleaned = -0.000319387 Jy
! Total flux subtracted in 200 components = -0.000319387 Jy
! Clean residual min=-0.001502 max=0.001771 Jy/beam
! Clean residual mean=-0.000037 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.358075 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 148 components and 0.358075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085667Jy  sigma=1.095071
! Fit after  self-cal, rms=0.085666Jy  sigma=1.095067
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.185 mas, bmaj=24.21 mas, bpa=-27.62 degrees
! Estimated noise=0.958598 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.185 x 24.21 at -27.62 degrees (North through East)
! Clean map  min=-0.0020534  max=0.26429 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.559 mas, bmaj=20.21 mas, bpa=-27.04 degrees
! Estimated noise=1.34585 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.200746 Jy
! Component: 100  -  total flux cleaned = 0.271931 Jy
! Component: 150  -  total flux cleaned = 0.307409 Jy
! Component: 200  -  total flux cleaned = 0.327582 Jy
! Total flux subtracted in 200 components = 0.327582 Jy
! Clean residual min=-0.006907 max=0.009956 Jy/beam
! Clean residual mean=-0.000151 rms=0.002415 Jy/beam
! Combined flux in latest and established models = 0.327582 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.327582 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.185 mas, bmaj=24.21 mas, bpa=-27.62 degrees
! Estimated noise=0.958598 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157434 Jy
! Component: 100  -  total flux cleaned = 0.0211158 Jy
! Component: 150  -  total flux cleaned = 0.0241352 Jy
! Component: 200  -  total flux cleaned = 0.0262867 Jy
! Total flux subtracted in 200 components = 0.0262867 Jy
! Clean residual min=-0.003041 max=0.003231 Jy/beam
! Clean residual mean=-0.000059 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.353869 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 62 components and 0.353869 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.38 mas, bmaj=49.46 mas, bpa=-19.54 degrees
! Estimated noise=1.21681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00257879 Jy
! Component: 100  -  total flux cleaned = 0.00334625 Jy
! Component: 150  -  total flux cleaned = 0.00362507 Jy
! Component: 200  -  total flux cleaned = 0.00387322 Jy
! Total flux subtracted in 200 components = 0.00387322 Jy
! Clean residual min=-0.002147 max=0.002763 Jy/beam
! Clean residual mean=-0.000041 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 0.357742 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187218 Jy
! Component: 100  -  total flux cleaned = 0.000355087 Jy
! Component: 150  -  total flux cleaned = 0.000384591 Jy
! Component: 200  -  total flux cleaned = 0.000412876 Jy
! Total flux subtracted in 200 components = 0.000412876 Jy
! Clean residual min=-0.001971 max=0.002392 Jy/beam
! Clean residual mean=-0.000038 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.358155 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 110 components and 0.358155 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.185 mas, bmaj=24.21 mas, bpa=-27.62 degrees
! Estimated noise=0.958598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00014371 Jy
! Component: 100  -  total flux cleaned = 3.51565e-05 Jy
! Component: 150  -  total flux cleaned = 0.000145791 Jy
! Component: 200  -  total flux cleaned = 0.000210107 Jy
! Total flux subtracted in 200 components = 0.000210107 Jy
! Clean residual min=-0.002165 max=0.002156 Jy/beam
! Clean residual mean=-0.000020 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.358365 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 132 components and 0.358365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085690Jy  sigma=1.095384
! Fit after  self-cal, rms=0.085689Jy  sigma=1.095356
wmodel J0559-4529_S_b_map.mod
! Writing 132 model components to file: J0559-4529_S_b_map.mod
wobs   J0559-4529_S_b_uvs.fits
! Writing UV FITS file: J0559-4529_S_b_uvs.fits
wwins  J0559-4529_S_b_map.win
! wwins: Wrote 2 windows to J0559-4529_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 3.43109e-05 Jy
! Component: 100  -  total flux cleaned = 0.000175215 Jy
! Component: 150  -  total flux cleaned = 0.000270735 Jy
! Component: 200  -  total flux cleaned = 0.000270153 Jy
! Component: 250  -  total flux cleaned = 0.00026902 Jy
! Component: 300  -  total flux cleaned = 0.000294411 Jy
! Component: 350  -  total flux cleaned = 0.000269307 Jy
! Component: 400  -  total flux cleaned = 0.000291676 Jy
! Component: 450  -  total flux cleaned = 0.000157738 Jy
! Component: 500  -  total flux cleaned = 7.17033e-05 Jy
! Component: 550  -  total flux cleaned = 8.98497e-06 Jy
! Component: 600  -  total flux cleaned = -1.04572e-05 Jy
! Component: 650  -  total flux cleaned = 9.34084e-06 Jy
! Component: 700  -  total flux cleaned = -2.8084e-05 Jy
! Component: 750  -  total flux cleaned = -2.81467e-05 Jy
! Component: 800  -  total flux cleaned = -2.77442e-05 Jy
! Component: 850  -  total flux cleaned = 0.000110456 Jy
! Component: 900  -  total flux cleaned = 0.000211795 Jy
! Component: 950  -  total flux cleaned = 0.000328267 Jy
! Component: 1000  -  total flux cleaned = 0.000442945 Jy
! Component: 1050  -  total flux cleaned = 0.00055585 Jy
! Component: 1100  -  total flux cleaned = 0.000666862 Jy
! Component: 1150  -  total flux cleaned = 0.000729551 Jy
! Component: 1200  -  total flux cleaned = 0.000791441 Jy
! Component: 1250  -  total flux cleaned = 0.000867853 Jy
! Component: 1300  -  total flux cleaned = 0.000958737 Jy
! Component: 1350  -  total flux cleaned = 0.00103357 Jy
! Component: 1400  -  total flux cleaned = 0.00107808 Jy
! Component: 1450  -  total flux cleaned = 0.00118096 Jy
! Component: 1500  -  total flux cleaned = 0.00123911 Jy
! Component: 1550  -  total flux cleaned = 0.00126799 Jy
! Component: 1600  -  total flux cleaned = 0.00139674 Jy
! Component: 1650  -  total flux cleaned = 0.00143931 Jy
! Component: 1700  -  total flux cleaned = 0.00153799 Jy
! Component: 1750  -  total flux cleaned = 0.00164973 Jy
! Component: 1800  -  total flux cleaned = 0.00171898 Jy
! Component: 1850  -  total flux cleaned = 0.00180149 Jy
! Component: 1900  -  total flux cleaned = 0.00188344 Jy
! Component: 1950  -  total flux cleaned = 0.00196489 Jy
! Component: 2000  -  total flux cleaned = 0.00201882 Jy
! Component: 2050  -  total flux cleaned = 0.00211256 Jy
! Component: 2100  -  total flux cleaned = 0.00216571 Jy
! Component: 2150  -  total flux cleaned = 0.00225832 Jy
! Component: 2200  -  total flux cleaned = 0.00232403 Jy
! Component: 2250  -  total flux cleaned = 0.00238944 Jy
! Component: 2300  -  total flux cleaned = 0.00248045 Jy
! Component: 2350  -  total flux cleaned = 0.00251919 Jy
! Component: 2400  -  total flux cleaned = 0.00259632 Jy
! Component: 2450  -  total flux cleaned = 0.00263466 Jy
! Component: 2500  -  total flux cleaned = 0.00268562 Jy
! Component: 2550  -  total flux cleaned = 0.00274895 Jy
! Component: 2600  -  total flux cleaned = 0.00274904 Jy
! Component: 2650  -  total flux cleaned = 0.00283709 Jy
! Component: 2700  -  total flux cleaned = 0.0028873 Jy
! Component: 2750  -  total flux cleaned = 0.00301226 Jy
! Component: 2800  -  total flux cleaned = 0.00307449 Jy
! Component: 2850  -  total flux cleaned = 0.0031491 Jy
! Component: 2900  -  total flux cleaned = 0.00322344 Jy
! Component: 2950  -  total flux cleaned = 0.00331005 Jy
! Component: 3000  -  total flux cleaned = 0.00337174 Jy
! Component: 3050  -  total flux cleaned = 0.00345794 Jy
! Component: 3100  -  total flux cleaned = 0.00349484 Jy
! Component: 3150  -  total flux cleaned = 0.003544 Jy
! Component: 3200  -  total flux cleaned = 0.00356858 Jy
! Component: 3250  -  total flux cleaned = 0.00361783 Jy
! Component: 3300  -  total flux cleaned = 0.00366713 Jy
! Component: 3350  -  total flux cleaned = 0.0037288 Jy
! Component: 3400  -  total flux cleaned = 0.00372873 Jy
! Component: 3450  -  total flux cleaned = 0.00377812 Jy
! Component: 3500  -  total flux cleaned = 0.00380289 Jy
! Component: 3550  -  total flux cleaned = 0.00382758 Jy
! Component: 3600  -  total flux cleaned = 0.00386479 Jy
! Component: 3650  -  total flux cleaned = 0.00391453 Jy
! Component: 3700  -  total flux cleaned = 0.00396445 Jy
! Component: 3750  -  total flux cleaned = 0.00397693 Jy
! Component: 3800  -  total flux cleaned = 0.00400201 Jy
! Component: 3850  -  total flux cleaned = 0.00403962 Jy
! Component: 3900  -  total flux cleaned = 0.00408994 Jy
! Component: 3950  -  total flux cleaned = 0.00412777 Jy
! Component: 4000  -  total flux cleaned = 0.00414047 Jy
! Component: 4050  -  total flux cleaned = 0.00416586 Jy
! Total flux subtracted in 4096 components = 0.00419135 Jy
! Clean residual min=-0.000715 max=0.000717 Jy/beam
! Clean residual mean=-0.000004 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.362556 Jy
keep
! Adding 214 model components to the UV plane model.
! The established model now contains 346 components and 0.362556 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0559-4529_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.185 x 24.21 at -27.62 degrees (North through East)
! Clean map  min=-0.0016743  max=0.26813 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0559-4529_S_b_map.fits
wmodel /vlbi/uf001/uvm//J0559-4529_S_b_map.mod
! Writing 346 model components to file: /vlbi/uf001/uvm//J0559-4529_S_b_map.mod
wobs   /vlbi/uf001/uvm//J0559-4529_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0559-4529_S_b_uvs.fits
wwins  /vlbi/uf001/uvm//J0559-4529_S_b_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J0559-4529_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.268131 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000291132 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.325734 0.325734 0.651469 1.30294 2.60588 5.21175 10.4235 20.847 41.694 83.388
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.268 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  920.995 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0559-4529_S_b_dfm.log closed on Sun Jan 13 20:53:28 2019