! Started logfile: /vlbi/uf001/uvm//J0555+3948_S_a_dfm.log on Sun Jan 13 20:52:42 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0555+3948_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0555+3948_S_a_uvm.fits
! AN table 1: 10 integrations on 36 of 36 possible baselines.
! AN table 2: 155 integrations on 45 of 45 possible baselines.
! AN table 3: 5 integrations on 21 of 21 possible baselines.
! AN table 4: 4 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.725238 visibilities/baseline/integration-bin.
! Found source: J0555+3948
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 16431 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0555+3948_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 366 telescope corrections were flagged in sub-array 2.
!  A total of 14 telescope corrections were flagged in sub-array 3.
!  A total of 8 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 366 telescope corrections were flagged in sub-array 2.
!  A total of 14 telescope corrections were flagged in sub-array 3.
!  A total of 8 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
!  A total of 366 telescope corrections were flagged in sub-array 2.
!  A total of 14 telescope corrections were flagged in sub-array 3.
!  A total of 8 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=3.481844Jy  sigma=21.476148
! Fit after  self-cal, rms=2.374584Jy  sigma=14.450385
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.505 mas, bmaj=4.57 mas, bpa=-0.9354 degrees
! Estimated noise=1.28965 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.42629 Jy
! Component: 100  -  total flux cleaned = 2.99451 Jy
! Total flux subtracted in 100 components = 2.99451 Jy
! Clean residual min=-0.050925 max=0.220804 Jy/beam
! Clean residual mean=0.000033 rms=0.010245 Jy/beam
! Combined flux in latest and established models = 2.99451 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 2.99451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.601664Jy  sigma=3.850687
! Fit after  self-cal, rms=0.601632Jy  sigma=3.850616
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.239531 Jy
! Component: 100  -  total flux cleaned = 0.360252 Jy
! Total flux subtracted in 100 components = 0.360252 Jy
! Clean residual min=-0.033787 max=0.055977 Jy/beam
! Clean residual mean=0.000018 rms=0.007854 Jy/beam
! Combined flux in latest and established models = 3.35476 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 8 components and 3.35476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.450559Jy  sigma=3.218091
! Fit after  self-cal, rms=0.450523Jy  sigma=3.217989
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0632447 Jy
! Component: 100  -  total flux cleaned = 0.0998774 Jy
! Total flux subtracted in 100 components = 0.0998774 Jy
! Clean residual min=-0.032148 max=0.049973 Jy/beam
! Clean residual mean=0.000013 rms=0.007718 Jy/beam
! Combined flux in latest and established models = 3.45464 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 3.45464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.432354Jy  sigma=3.192033
! Fit after  self-cal, rms=0.432349Jy  sigma=3.192029
! Inverting map 
! Added new window around map position (-7.5, -1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.047785 Jy
! Component: 100  -  total flux cleaned = 0.0695586 Jy
! Total flux subtracted in 100 components = 0.0695586 Jy
! Clean residual min=-0.028949 max=0.049074 Jy/beam
! Clean residual mean=0.000011 rms=0.007563 Jy/beam
! Combined flux in latest and established models = 3.5242 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 36 components and 3.5242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.425578Jy  sigma=3.156908
! Fit after  self-cal, rms=0.425025Jy  sigma=3.153762
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.331 mas, bmaj=5.663 mas, bpa=-0.8197 degrees
! Estimated noise=0.940254 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8, 6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0544384 Jy
! Component: 100  -  total flux cleaned = 0.0812639 Jy
! Component: 150  -  total flux cleaned = 0.0908126 Jy
! Component: 200  -  total flux cleaned = 0.0944634 Jy
! Total flux subtracted in 200 components = 0.0944634 Jy
! Clean residual min=-0.030785 max=0.032184 Jy/beam
! Clean residual mean=0.000083 rms=0.007895 Jy/beam
! Combined flux in latest and established models = 3.61866 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 57 components and 3.61866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.416216Jy  sigma=3.105309
! Fit after  self-cal, rms=0.415918Jy  sigma=3.103687
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.331 x 5.663 at -0.8197 degrees (North through East)
! Clean map  min=-0.030027  max=3.2048 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        1.06     HN        1.02     LA        0.92     
!   MK        1.02     NL        1.07     OV        1.03     PT        1.00     
!   SC        1.06     
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.99     HN        0.98     KP        1.01     
!   LA        0.96     MK        1.13     NL        1.05     OV        0.99     
!   PT        1.02     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.03     KP        0.99     MK        0.99     NL        0.98     
!   OV        0.98     PT        0.95     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.01     HN        1.00     KP        0.97     LA        0.95     
!   MK        1.11     NL        1.02     OV        0.93     PT        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.06     HN        1.00     LA        0.95     
!   MK        1.00     NL        1.07     OV        1.00     PT        1.03     
!   SC        1.04     
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.00     HN        0.98     KP        1.00     
!   LA        0.96     MK        1.11     NL        1.04     OV        1.06     
!   PT        1.01     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.13     KP        0.97     MK        1.00     NL        0.98     
!   OV        0.96     PT        0.93     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.83     HN        1.00     KP        0.98     LA        0.96     
!   MK        1.07     NL        1.05     OV        0.95     PT        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.00     LA        0.93     
!   MK        0.99     NL        1.07     OV        1.01     PT        1.02     
!   SC        1.02     
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.98     HN        0.96     KP        1.00     
!   LA        0.96     MK        1.11     NL        1.05     OV        1.00     
!   PT        1.00     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.08     KP        0.98     MK        1.01     NL        0.97     
!   OV        0.96     PT        0.93     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.00     HN        0.99     KP        0.96     LA        0.96     
!   MK        1.03     NL        1.09     OV        0.89     PT        0.96     
! 
! 
! Fit before self-cal, rms=0.415918Jy  sigma=3.103687
! Fit after  self-cal, rms=0.424803Jy  sigma=2.821634
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=5.707 mas, bpa=-0.05713 degrees
! Estimated noise=0.959722 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00288434 Jy
! Component: 100  -  total flux cleaned = -0.00436212 Jy
! Component: 150  -  total flux cleaned = -0.0126645 Jy
! Component: 200  -  total flux cleaned = -0.0171852 Jy
! Total flux subtracted in 200 components = -0.0171852 Jy
! Clean residual min=-0.025866 max=0.026893 Jy/beam
! Clean residual mean=0.000085 rms=0.006821 Jy/beam
! Combined flux in latest and established models = 3.60147 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 77 components and 3.60147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.416420Jy  sigma=2.800863
! Fit after  self-cal, rms=0.416370Jy  sigma=2.800632
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.416370Jy  sigma=2.800632
! Fit after  self-cal, rms=0.204339Jy  sigma=1.005578
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.38 mas, bmaj=5.678 mas, bpa=-0.9092 degrees
! Estimated noise=0.959718 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00933108 Jy
! Component: 100  -  total flux cleaned = -0.0123069 Jy
! Component: 150  -  total flux cleaned = -0.0153875 Jy
! Component: 200  -  total flux cleaned = -0.0180366 Jy
! Total flux subtracted in 200 components = -0.0180366 Jy
! Clean residual min=-0.010349 max=0.009051 Jy/beam
! Clean residual mean=0.000028 rms=0.002112 Jy/beam
! Combined flux in latest and established models = 3.58344 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 94 components and 3.58344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.200851Jy  sigma=0.987231
! Fit after  self-cal, rms=0.200809Jy  sigma=0.986547
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00264555 Jy
! Component: 100  -  total flux cleaned = -0.00386395 Jy
! Component: 150  -  total flux cleaned = -0.00469224 Jy
! Component: 200  -  total flux cleaned = -0.00572036 Jy
! Total flux subtracted in 200 components = -0.00572036 Jy
! Clean residual min=-0.009552 max=0.008935 Jy/beam
! Clean residual mean=0.000028 rms=0.002075 Jy/beam
! Combined flux in latest and established models = 3.57772 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 107 components and 3.57772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.199886Jy  sigma=0.981742
! Fit after  self-cal, rms=0.199874Jy  sigma=0.981607
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.199874Jy  sigma=0.981607
! Fit after  self-cal, rms=0.102801Jy  sigma=0.583091
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.377 mas, bmaj=5.68 mas, bpa=-0.9347 degrees
! Estimated noise=0.959474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0107191 Jy
! Component: 100  -  total flux cleaned = -0.0130687 Jy
! Component: 150  -  total flux cleaned = -0.0142241 Jy
! Component: 200  -  total flux cleaned = -0.0150574 Jy
! Total flux subtracted in 200 components = -0.0150574 Jy
! Clean residual min=-0.006580 max=0.005351 Jy/beam
! Clean residual mean=0.000014 rms=0.000948 Jy/beam
! Combined flux in latest and established models = 3.56266 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 116 components and 3.56266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101315Jy  sigma=0.573400
! Fit after  self-cal, rms=0.101310Jy  sigma=0.573289
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000803437 Jy
! Component: 100  -  total flux cleaned = -0.00115191 Jy
! Component: 150  -  total flux cleaned = -0.00178246 Jy
! Component: 200  -  total flux cleaned = -0.00235723 Jy
! Total flux subtracted in 200 components = -0.00235723 Jy
! Clean residual min=-0.005935 max=0.005061 Jy/beam
! Clean residual mean=0.000014 rms=0.000924 Jy/beam
! Combined flux in latest and established models = 3.5603 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 124 components and 3.5603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100858Jy  sigma=0.570152
! Fit after  self-cal, rms=0.100854Jy  sigma=0.570114
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100854Jy  sigma=0.570114
! Fit after  self-cal, rms=0.099542Jy  sigma=0.563372
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.441 mas, bmaj=8.953 mas, bpa=0.9117 degrees
! Estimated noise=1.27424 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00767854 Jy
! Component: 100  -  total flux cleaned = -0.0114574 Jy
! Component: 150  -  total flux cleaned = -0.0125178 Jy
! Component: 200  -  total flux cleaned = -0.0129513 Jy
! Total flux subtracted in 200 components = -0.0129513 Jy
! Clean residual min=-0.003984 max=0.003791 Jy/beam
! Clean residual mean=0.000024 rms=0.000987 Jy/beam
! Combined flux in latest and established models = 3.54735 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 139 components and 3.54735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099097Jy  sigma=0.561009
! Fit after  self-cal, rms=0.099085Jy  sigma=0.560813
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000446792 Jy
! Component: 100  -  total flux cleaned = -0.000445341 Jy
! Component: 150  -  total flux cleaned = -0.000559701 Jy
! Component: 200  -  total flux cleaned = -0.000716012 Jy
! Total flux subtracted in 200 components = -0.000716012 Jy
! Clean residual min=-0.003910 max=0.003833 Jy/beam
! Clean residual mean=0.000023 rms=0.000978 Jy/beam
! Combined flux in latest and established models = 3.54664 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 145 components and 3.54664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099028Jy  sigma=0.560625
! Fit after  self-cal, rms=0.099028Jy  sigma=0.560607
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.378 mas, bmaj=5.681 mas, bpa=-0.9637 degrees
! Estimated noise=0.959486 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.378 x 5.681 at -0.9637 degrees (North through East)
! Clean map  min=-0.0053898  max=3.2713 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099028Jy  sigma=0.560607
! Fit after  self-cal, rms=0.072331Jy  sigma=0.396980
! Inverting map and beam 
! Estimated beam: bmin=3.378 mas, bmaj=5.682 mas, bpa=-0.978 degrees
! Estimated noise=0.95889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00557239 Jy
! Component: 100  -  total flux cleaned = -0.00762571 Jy
! Component: 150  -  total flux cleaned = -0.00807605 Jy
! Component: 200  -  total flux cleaned = -0.0086208 Jy
! Total flux subtracted in 200 components = -0.0086208 Jy
! Clean residual min=-0.005510 max=0.004022 Jy/beam
! Clean residual mean=0.000011 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 3.53801 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 151 components and 3.53801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071651Jy  sigma=0.392153
! Fit after  self-cal, rms=0.071637Jy  sigma=0.392119
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000259748 Jy
! Component: 100  -  total flux cleaned = -0.000377657 Jy
! Component: 150  -  total flux cleaned = -0.000490484 Jy
! Component: 200  -  total flux cleaned = -0.000595175 Jy
! Total flux subtracted in 200 components = -0.000595175 Jy
! Clean residual min=-0.005120 max=0.004078 Jy/beam
! Clean residual mean=0.000011 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 3.53742 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 157 components and 3.53742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071345Jy  sigma=0.389820
! Fit after  self-cal, rms=0.071336Jy  sigma=0.389794
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071336Jy  sigma=0.389794
! Fit after  self-cal, rms=0.071090Jy  sigma=0.388455
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.525 mas, bmaj=4.576 mas, bpa=-0.954 degrees
! Estimated noise=1.31784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.47388 Jy
! Component: 100  -  total flux cleaned = 3.04131 Jy
! Component: 150  -  total flux cleaned = 3.26905 Jy
! Component: 200  -  total flux cleaned = 3.38345 Jy
! Total flux subtracted in 200 components = 3.38345 Jy
! Clean residual min=-0.022939 max=0.053024 Jy/beam
! Clean residual mean=0.000011 rms=0.002408 Jy/beam
! Combined flux in latest and established models = 3.38345 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 3.38345 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.38 mas, bmaj=5.681 mas, bpa=-1.015 degrees
! Estimated noise=0.958813 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0712734 Jy
! Component: 100  -  total flux cleaned = 0.103266 Jy
! Component: 150  -  total flux cleaned = 0.120228 Jy
! Component: 200  -  total flux cleaned = 0.130063 Jy
! Total flux subtracted in 200 components = 0.130063 Jy
! Clean residual min=-0.007747 max=0.009030 Jy/beam
! Clean residual mean=0.000013 rms=0.000924 Jy/beam
! Combined flux in latest and established models = 3.51351 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 49 components and 3.51351 Jy
! Inverting map 
! Added new window around map position (2, 6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00456339 Jy
! Component: 100  -  total flux cleaned = 0.00691966 Jy
! Component: 150  -  total flux cleaned = 0.00846881 Jy
! Component: 200  -  total flux cleaned = 0.00935248 Jy
! Total flux subtracted in 200 components = 0.00935248 Jy
! Clean residual min=-0.008095 max=0.007063 Jy/beam
! Clean residual mean=0.000012 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 3.52286 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 56 components and 3.52286 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.447 mas, bmaj=8.953 mas, bpa=0.8754 degrees
! Estimated noise=1.27265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00529171 Jy
! Component: 100  -  total flux cleaned = 0.00695119 Jy
! Component: 150  -  total flux cleaned = 0.0081698 Jy
! Component: 200  -  total flux cleaned = 0.0089507 Jy
! Total flux subtracted in 200 components = 0.0089507 Jy
! Clean residual min=-0.002955 max=0.004134 Jy/beam
! Clean residual mean=0.000024 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 3.53181 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.5, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00269778 Jy
! Component: 100  -  total flux cleaned = 0.00312717 Jy
! Component: 150  -  total flux cleaned = 0.00350212 Jy
! Component: 200  -  total flux cleaned = 0.00377597 Jy
! Total flux subtracted in 200 components = 0.00377597 Jy
! Clean residual min=-0.002812 max=0.003025 Jy/beam
! Clean residual mean=0.000020 rms=0.000791 Jy/beam
! Combined flux in latest and established models = 3.53559 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 120 components and 3.53559 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.38 mas, bmaj=5.681 mas, bpa=-1.015 degrees
! Estimated noise=0.958813 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00365741 Jy
! Component: 100  -  total flux cleaned = -0.00337735 Jy
! Component: 150  -  total flux cleaned = -0.00311183 Jy
! Component: 200  -  total flux cleaned = -0.00286587 Jy
! Total flux subtracted in 200 components = -0.00286587 Jy
! Clean residual min=-0.004104 max=0.004061 Jy/beam
! Clean residual mean=0.000009 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 3.53272 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 130 components and 3.53272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073747Jy  sigma=0.423557
! Fit after  self-cal, rms=0.073653Jy  sigma=0.422493
wmodel J0555+3948_S_a_map.mod
! Writing 130 model components to file: J0555+3948_S_a_map.mod
wobs   J0555+3948_S_a_uvs.fits
! Writing UV FITS file: J0555+3948_S_a_uvs.fits
wwins  J0555+3948_S_a_map.win
! wwins: Wrote 5 windows to J0555+3948_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000355013 Jy
! Component: 100  -  total flux cleaned = 0.000273858 Jy
! Component: 150  -  total flux cleaned = 0.000350756 Jy
! Component: 200  -  total flux cleaned = 0.00042692 Jy
! Component: 250  -  total flux cleaned = 0.000502724 Jy
! Component: 300  -  total flux cleaned = 0.000577804 Jy
! Component: 350  -  total flux cleaned = 0.000796236 Jy
! Component: 400  -  total flux cleaned = 0.000867013 Jy
! Component: 450  -  total flux cleaned = 0.000937387 Jy
! Component: 500  -  total flux cleaned = 0.000936961 Jy
! Component: 550  -  total flux cleaned = 0.00100653 Jy
! Component: 600  -  total flux cleaned = 0.00100709 Jy
! Component: 650  -  total flux cleaned = 0.00107454 Jy
! Component: 700  -  total flux cleaned = 0.001074 Jy
! Component: 750  -  total flux cleaned = 0.00120609 Jy
! Component: 800  -  total flux cleaned = 0.00120596 Jy
! Component: 850  -  total flux cleaned = 0.00127054 Jy
! Component: 900  -  total flux cleaned = 0.00133422 Jy
! Component: 950  -  total flux cleaned = 0.0013979 Jy
! Component: 1000  -  total flux cleaned = 0.00152295 Jy
! Component: 1050  -  total flux cleaned = 0.00152279 Jy
! Component: 1100  -  total flux cleaned = 0.00158419 Jy
! Component: 1150  -  total flux cleaned = 0.00158413 Jy
! Component: 1200  -  total flux cleaned = 0.0015847 Jy
! Component: 1250  -  total flux cleaned = 0.00158543 Jy
! Component: 1300  -  total flux cleaned = 0.00164464 Jy
! Component: 1350  -  total flux cleaned = 0.00158631 Jy
! Component: 1400  -  total flux cleaned = 0.0015874 Jy
! Component: 1450  -  total flux cleaned = 0.00164517 Jy
! Component: 1500  -  total flux cleaned = 0.00164437 Jy
! Component: 1550  -  total flux cleaned = 0.00158785 Jy
! Component: 1600  -  total flux cleaned = 0.00153257 Jy
! Component: 1650  -  total flux cleaned = 0.00153306 Jy
! Component: 1700  -  total flux cleaned = 0.00153334 Jy
! Component: 1750  -  total flux cleaned = 0.00147873 Jy
! Component: 1800  -  total flux cleaned = 0.00147936 Jy
! Component: 1850  -  total flux cleaned = 0.00147935 Jy
! Component: 1900  -  total flux cleaned = 0.00147999 Jy
! Component: 1950  -  total flux cleaned = 0.00153305 Jy
! Component: 2000  -  total flux cleaned = 0.00153245 Jy
! Component: 2050  -  total flux cleaned = 0.00148078 Jy
! Component: 2100  -  total flux cleaned = 0.00153238 Jy
! Component: 2150  -  total flux cleaned = 0.00153231 Jy
! Component: 2200  -  total flux cleaned = 0.00153278 Jy
! Component: 2250  -  total flux cleaned = 0.00153242 Jy
! Component: 2300  -  total flux cleaned = 0.00148353 Jy
! Component: 2350  -  total flux cleaned = 0.00148384 Jy
! Component: 2400  -  total flux cleaned = 0.00148368 Jy
! Component: 2450  -  total flux cleaned = 0.00143517 Jy
! Component: 2500  -  total flux cleaned = 0.00153192 Jy
! Component: 2550  -  total flux cleaned = 0.00138777 Jy
! Component: 2600  -  total flux cleaned = 0.00157843 Jy
! Component: 2650  -  total flux cleaned = 0.00148364 Jy
! Component: 2700  -  total flux cleaned = 0.00153028 Jy
! Component: 2750  -  total flux cleaned = 0.00153058 Jy
! Component: 2800  -  total flux cleaned = 0.00153046 Jy
! Component: 2850  -  total flux cleaned = 0.00166884 Jy
! Component: 2900  -  total flux cleaned = 0.00162309 Jy
! Component: 2950  -  total flux cleaned = 0.00171358 Jy
! Component: 3000  -  total flux cleaned = 0.00175869 Jy
! Component: 3050  -  total flux cleaned = 0.00175875 Jy
! Component: 3100  -  total flux cleaned = 0.00189237 Jy
! Component: 3150  -  total flux cleaned = 0.00198053 Jy
! Component: 3200  -  total flux cleaned = 0.00189236 Jy
! Component: 3250  -  total flux cleaned = 0.00206697 Jy
! Component: 3300  -  total flux cleaned = 0.00198018 Jy
! Component: 3350  -  total flux cleaned = 0.00210953 Jy
! Component: 3400  -  total flux cleaned = 0.00219524 Jy
! Component: 3450  -  total flux cleaned = 0.00215277 Jy
! Component: 3500  -  total flux cleaned = 0.00223756 Jy
! Component: 3550  -  total flux cleaned = 0.0024056 Jy
! Component: 3600  -  total flux cleaned = 0.00240599 Jy
! Component: 3650  -  total flux cleaned = 0.00253058 Jy
! Component: 3700  -  total flux cleaned = 0.00257189 Jy
! Component: 3750  -  total flux cleaned = 0.00265405 Jy
! Component: 3800  -  total flux cleaned = 0.00273563 Jy
! Component: 3850  -  total flux cleaned = 0.00277613 Jy
! Component: 3900  -  total flux cleaned = 0.00289715 Jy
! Component: 3950  -  total flux cleaned = 0.00293716 Jy
! Component: 4000  -  total flux cleaned = 0.00301645 Jy
! Component: 4050  -  total flux cleaned = 0.00305605 Jy
! Total flux subtracted in 4096 components = 0.00317474 Jy
! Clean residual min=-0.001972 max=0.001969 Jy/beam
! Clean residual mean=0.000009 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 3.5359 Jy
keep
! Adding 131 model components to the UV plane model.
! The established model now contains 242 components and 3.5359 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0555+3948_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.38 x 5.681 at -1.015 degrees (North through East)
! Clean map  min=-0.0039714  max=3.2765 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0555+3948_S_a_map.fits
wmodel /vlbi/uf001/uvm//J0555+3948_S_a_map.mod
! Writing 242 model components to file: /vlbi/uf001/uvm//J0555+3948_S_a_map.mod
wobs   /vlbi/uf001/uvm//J0555+3948_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0555+3948_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J0555+3948_S_a_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uvm//J0555+3948_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 3.2765 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000586789 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.053727 0.053727 0.107454 0.214908 0.429816 0.859633 1.71927 3.43853 6.87706 13.7541 27.5082 55.0165
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       3.276 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  5583.78 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0555+3948_S_a_dfm.log closed on Sun Jan 13 20:52:47 2019