! Started logfile: /vlbi/uf001/uvm//J0539-2839_X_b_dfm.log on Sun Jan 13 20:52:23 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0539-2839_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0539-2839_X_b_uvm.fits ! AN table 1: 35 integrations on 45 of 45 possible baselines. ! AN table 2: 7 integrations on 21 of 21 possible baselines. ! AN table 3: 7 integrations on 1 of 1 possible baselines. ! AN table 4: 14 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.590759 visibilities/baseline/integration-bin. ! Found source: J0539-2839 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 15036 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0539-2839_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 218 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 64 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 218 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 64 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 218 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 64 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 218 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 64 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 218 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 64 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 218 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 64 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 218 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 64 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 218 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 64 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 218 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 64 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 218 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 64 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 218 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 64 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 218 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 64 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.111021Jy sigma=17.094951 ! Fit after self-cal, rms=0.593547Jy sigma=8.773467 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6216 mas, bmaj=1.913 mas, bpa=-8.35 degrees ! Estimated noise=0.74504 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.287871 Jy ! Component: 100 - total flux cleaned = 0.402705 Jy ! Total flux subtracted in 100 components = 0.402705 Jy ! Clean residual min=-0.023296 max=0.057193 Jy/beam ! Clean residual mean=-0.000150 rms=0.005556 Jy/beam ! Combined flux in latest and established models = 0.402705 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.402705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.191364Jy sigma=2.922542 ! Fit after self-cal, rms=0.191138Jy sigma=2.919849 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0656174 Jy ! Component: 100 - total flux cleaned = 0.104746 Jy ! Total flux subtracted in 100 components = 0.104746 Jy ! Clean residual min=-0.017065 max=0.039388 Jy/beam ! Clean residual mean=-0.000114 rms=0.003964 Jy/beam ! Combined flux in latest and established models = 0.507451 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.507451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.150690Jy sigma=2.161354 ! Fit after self-cal, rms=0.150498Jy sigma=2.158868 ! Inverting map ! Added new window around map position (1.4, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392702 Jy ! Component: 100 - total flux cleaned = 0.0634365 Jy ! Total flux subtracted in 100 components = 0.0634365 Jy ! Clean residual min=-0.015155 max=0.030844 Jy/beam ! Clean residual mean=-0.000093 rms=0.003298 Jy/beam ! Combined flux in latest and established models = 0.570888 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 39 components and 0.570888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.131267Jy sigma=1.843528 ! Fit after self-cal, rms=0.129814Jy sigma=1.817165 ! Inverting map ! Added new window around map position (-1.6, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257233 Jy ! Component: 100 - total flux cleaned = 0.0435201 Jy ! Total flux subtracted in 100 components = 0.0435201 Jy ! Clean residual min=-0.012359 max=0.013784 Jy/beam ! Clean residual mean=-0.000079 rms=0.002848 Jy/beam ! Combined flux in latest and established models = 0.614408 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 52 components and 0.614408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120169Jy sigma=1.662138 ! Fit after self-cal, rms=0.120137Jy sigma=1.661692 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8622 mas, bmaj=2.564 mas, bpa=-6.196 degrees ! Estimated noise=0.508118 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253261 Jy ! Component: 100 - total flux cleaned = 0.042093 Jy ! Component: 150 - total flux cleaned = 0.0539188 Jy ! Component: 200 - total flux cleaned = 0.062368 Jy ! Total flux subtracted in 200 components = 0.062368 Jy ! Clean residual min=-0.012751 max=0.014195 Jy/beam ! Clean residual mean=-0.000068 rms=0.003541 Jy/beam ! Combined flux in latest and established models = 0.676776 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 79 components and 0.676776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113813Jy sigma=1.547284 ! Fit after self-cal, rms=0.113766Jy sigma=1.546547 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8622 x 2.564 at -6.196 degrees (North through East) ! Clean map min=-0.012058 max=0.41062 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 1.21 KP 0.98 ! LA 1.01 MK 1.02 NL 1.29 OV 0.89 ! PT 0.94 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.10 KP 1.04 LA 0.98 ! NL 1.01 OV 0.86 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.87 FD 0.97 HN 1.21 KP 1.03 ! LA 1.02 MK 1.05 NL 1.00 OV 0.88 ! ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.95 HN 1.31 KP 0.97 ! LA 1.02 MK 1.02 NL 1.27 OV 0.89 ! PT 0.96 SC 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.12 KP 1.02 LA 1.03 ! NL 1.02 OV 0.86 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.88 FD 0.96 HN 1.17 KP 1.01 ! LA 1.01 MK 1.02 NL 1.02 OV 0.87 ! ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.95 HN 1.28 KP 0.99 ! LA 1.02 MK 1.02 NL 1.28 OV 0.91 ! PT 0.95 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.05 KP 1.03 LA 1.00 ! NL 0.99 OV 0.88 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.88 FD 0.97 HN 1.20 KP 1.02 ! LA 0.99 MK 1.04 NL 1.02 OV 0.89 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.95 HN 1.15 KP 0.99 ! LA 1.00 MK 1.00 NL 1.33 OV 0.91 ! PT 0.97 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.11 KP 0.99 LA 1.01 ! NL 1.00 OV 0.88 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 0.98 HN 1.24 KP 1.01 ! LA 1.01 MK 1.04 NL 0.99 OV 0.88 ! ! ! Correcting IF 5. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 1.31 KP 0.97 ! LA 1.02 MK 1.01 NL 1.31 OV 0.89 ! PT 0.96 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.13 KP 1.01 LA 1.02 ! NL 0.97 OV 0.88 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 0.93 HN 1.15 KP 1.02 ! LA 1.01 MK 1.04 NL 1.00 OV 0.88 ! ! ! Correcting IF 6. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.95 HN 1.27 KP 0.97 ! LA 1.01 MK 1.04 NL 1.30 OV 0.88 ! PT 0.97 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 1.15 KP 1.01 LA 1.02 ! NL 1.01 OV 0.88 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.87 FD 0.98 HN 1.18 KP 1.02 ! LA 1.01 MK 1.06 NL 0.98 OV 0.88 ! ! ! Correcting IF 7. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.94 HN 1.25 KP 0.98 ! LA 1.00 MK 1.02 NL 1.30 OV 0.90 ! PT 0.97 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.12 KP 1.06 LA 1.01 ! NL 1.01 OV 0.88 PT 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.87 FD 0.96 HN 1.17 KP 1.02 ! LA 1.03 MK 1.00 NL 0.94 OV 0.90 ! ! ! Correcting IF 8. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.96 HN 1.34 KP 1.00 ! LA 1.03 MK 1.03 NL 1.30 OV 0.91 ! PT 0.94 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.11 KP 1.05 LA 1.00 ! NL 1.00 OV 0.85 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.88 FD 0.98 HN 1.18 KP 1.02 ! LA 0.98 MK 1.09 NL 0.99 OV 0.86 ! ! ! Correcting IF 9. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.96 HN 1.17 KP 0.99 ! LA 1.02 MK 1.03 NL 1.29 OV 0.89 ! PT 0.95 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.13 KP 1.02 LA 1.02 ! NL 1.02 OV 0.84 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.88 FD 0.97 HN 1.19 KP 1.04 ! LA 1.02 MK 1.03 NL 0.97 OV 0.87 ! ! ! Correcting IF 10. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 1.22 KP 0.98 ! LA 1.01 MK 0.99 NL 1.33 OV 0.88 ! PT 0.98 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.08 KP 1.01 LA 1.00 ! NL 1.01 OV 0.85 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.87 FD 0.99 HN 1.23 KP 1.00 ! LA 0.98 MK 1.05 NL 0.99 OV 0.89 ! ! ! Correcting IF 11. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.95 HN 1.13 KP 0.98 ! LA 0.99 MK 1.01 NL 1.32 OV 0.90 ! PT 0.97 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.09 KP 1.04 LA 1.02 ! NL 0.97 OV 0.88 PT 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.88 FD 0.97 HN 1.24 KP 1.02 ! LA 1.02 MK 1.04 NL 1.01 OV 0.89 ! ! ! Correcting IF 12. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.95 HN 1.27 KP 0.97 ! LA 1.01 MK 1.02 NL 1.31 OV 0.88 ! PT 0.97 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.23 KP 1.02 LA 1.01 ! NL 0.95 OV 0.87 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.85 FD 0.95 HN 1.23 KP 1.02 ! LA 1.01 MK 1.04 NL 0.96 OV 0.89 ! ! ! Fit before self-cal, rms=0.113766Jy sigma=1.546547 ! Fit after self-cal, rms=0.098277Jy sigma=1.211909 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8713 mas, bmaj=2.535 mas, bpa=-5.782 degrees ! Estimated noise=0.513291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0112875 Jy ! Component: 100 - total flux cleaned = -0.0142658 Jy ! Component: 150 - total flux cleaned = -0.0161576 Jy ! Component: 200 - total flux cleaned = -0.0175278 Jy ! Total flux subtracted in 200 components = -0.0175278 Jy ! Clean residual min=-0.006781 max=0.009849 Jy/beam ! Clean residual mean=-0.000013 rms=0.001724 Jy/beam ! Combined flux in latest and established models = 0.659248 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 92 components and 0.659248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096766Jy sigma=1.179022 ! Fit after self-cal, rms=0.096872Jy sigma=1.178298 ! Inverting map ! Added new window around map position (-3.2, 14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0088661 Jy ! Component: 100 - total flux cleaned = 0.0117936 Jy ! Component: 150 - total flux cleaned = 0.0124015 Jy ! Component: 200 - total flux cleaned = 0.0128035 Jy ! Total flux subtracted in 200 components = 0.0128035 Jy ! Clean residual min=-0.006680 max=0.007207 Jy/beam ! Clean residual mean=-0.000009 rms=0.001618 Jy/beam ! Combined flux in latest and established models = 0.672051 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 109 components and 0.672051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095764Jy sigma=1.163879 ! Fit after self-cal, rms=0.095727Jy sigma=1.162829 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095727Jy sigma=1.162829 ! Fit after self-cal, rms=0.096330Jy sigma=1.063558 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8743 mas, bmaj=2.53 mas, bpa=-5.763 degrees ! Estimated noise=0.51409 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00526162 Jy ! Component: 100 - total flux cleaned = -0.00814902 Jy ! Component: 150 - total flux cleaned = -0.00951612 Jy ! Component: 200 - total flux cleaned = -0.0107027 Jy ! Total flux subtracted in 200 components = -0.0107027 Jy ! Clean residual min=-0.004359 max=0.004406 Jy/beam ! Clean residual mean=-0.000005 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.661349 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 127 components and 0.661349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095855Jy sigma=1.055133 ! Fit after self-cal, rms=0.095934Jy sigma=1.054753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000977613 Jy ! Component: 100 - total flux cleaned = -0.0016058 Jy ! Component: 150 - total flux cleaned = -0.00217729 Jy ! Component: 200 - total flux cleaned = -0.00277057 Jy ! Total flux subtracted in 200 components = -0.00277057 Jy ! Clean residual min=-0.004116 max=0.004293 Jy/beam ! Clean residual mean=-0.000007 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.658578 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 137 components and 0.658578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095782Jy sigma=1.051839 ! Fit after self-cal, rms=0.095776Jy sigma=1.051736 ! Inverting map ! Added new window around map position (3.6, -4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378607 Jy ! Component: 100 - total flux cleaned = 0.00406185 Jy ! Component: 150 - total flux cleaned = 0.00406056 Jy ! Component: 200 - total flux cleaned = 0.00405646 Jy ! Total flux subtracted in 200 components = 0.00405646 Jy ! Clean residual min=-0.003704 max=0.003384 Jy/beam ! Clean residual mean=-0.000005 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.662634 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 151 components and 0.662634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095629Jy sigma=1.046804 ! Fit after self-cal, rms=0.095610Jy sigma=1.046619 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095610Jy sigma=1.046619 ! Fit after self-cal, rms=0.096733Jy sigma=1.035677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8757 mas, bmaj=2.523 mas, bpa=-5.727 degrees ! Estimated noise=0.51464 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00308806 Jy ! Component: 100 - total flux cleaned = -0.0039821 Jy ! Component: 150 - total flux cleaned = -0.00467861 Jy ! Component: 200 - total flux cleaned = -0.00514813 Jy ! Total flux subtracted in 200 components = -0.00514813 Jy ! Clean residual min=-0.003558 max=0.002912 Jy/beam ! Clean residual mean=-0.000004 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.657486 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 162 components and 0.657486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096510Jy sigma=1.032054 ! Fit after self-cal, rms=0.096516Jy sigma=1.032015 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000300487 Jy ! Component: 100 - total flux cleaned = -0.000366154 Jy ! Component: 150 - total flux cleaned = -0.000492588 Jy ! Component: 200 - total flux cleaned = -0.000552479 Jy ! Total flux subtracted in 200 components = -0.000552479 Jy ! Clean residual min=-0.003465 max=0.002832 Jy/beam ! Clean residual mean=-0.000005 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.656934 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 169 components and 0.656934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096430Jy sigma=1.030345 ! Fit after self-cal, rms=0.096425Jy sigma=1.030321 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096425Jy sigma=1.030321 ! Fit after self-cal, rms=0.097136Jy sigma=1.029417 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.23 mas, bmaj=6.3 mas, bpa=2.892 degrees ! Estimated noise=0.632041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00260562 Jy ! Component: 100 - total flux cleaned = -0.00307077 Jy ! Component: 150 - total flux cleaned = -0.00318034 Jy ! Component: 200 - total flux cleaned = -0.00332441 Jy ! Total flux subtracted in 200 components = -0.00332441 Jy ! Clean residual min=-0.004121 max=0.002774 Jy/beam ! Clean residual mean=-0.000010 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.65361 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 192 components and 0.65361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097035Jy sigma=1.028397 ! Fit after self-cal, rms=0.097032Jy sigma=1.028367 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.85798e-05 Jy ! Component: 100 - total flux cleaned = -8.71601e-05 Jy ! Component: 150 - total flux cleaned = -8.81298e-05 Jy ! Component: 200 - total flux cleaned = -0.000120005 Jy ! Total flux subtracted in 200 components = -0.000120005 Jy ! Clean residual min=-0.004034 max=0.002823 Jy/beam ! Clean residual mean=-0.000011 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.65349 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 200 components and 0.65349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097002Jy sigma=1.028116 ! Fit after self-cal, rms=0.096999Jy sigma=1.028103 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8766 mas, bmaj=2.52 mas, bpa=-5.667 degrees ! Estimated noise=0.514788 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8766 x 2.52 at -5.667 degrees (North through East) ! Clean map min=-0.0044059 max=0.41869 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6294 mas, bmaj=1.858 mas, bpa=-7.439 degrees ! Estimated noise=0.768736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.297213 Jy ! Component: 100 - total flux cleaned = 0.412009 Jy ! Component: 150 - total flux cleaned = 0.477834 Jy ! Component: 200 - total flux cleaned = 0.518652 Jy ! Total flux subtracted in 200 components = 0.518652 Jy ! Clean residual min=-0.010210 max=0.022074 Jy/beam ! Clean residual mean=-0.000055 rms=0.002394 Jy/beam ! Combined flux in latest and established models = 0.518652 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.518652 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8766 mas, bmaj=2.52 mas, bpa=-5.667 degrees ! Estimated noise=0.514788 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0479127 Jy ! Component: 100 - total flux cleaned = 0.0731706 Jy ! Component: 150 - total flux cleaned = 0.0886615 Jy ! Component: 200 - total flux cleaned = 0.0987125 Jy ! Total flux subtracted in 200 components = 0.0987125 Jy ! Clean residual min=-0.004389 max=0.005831 Jy/beam ! Clean residual mean=-0.000026 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.617364 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 69 components and 0.617364 Jy ! Inverting map ! Added new window around map position (2.4, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00705574 Jy ! Component: 100 - total flux cleaned = 0.0124258 Jy ! Component: 150 - total flux cleaned = 0.0167413 Jy ! Component: 200 - total flux cleaned = 0.0203084 Jy ! Total flux subtracted in 200 components = 0.0203084 Jy ! Clean residual min=-0.003917 max=0.003395 Jy/beam ! Clean residual mean=-0.000012 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.637673 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 93 components and 0.637673 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.23 mas, bmaj=6.3 mas, bpa=2.892 degrees ! Estimated noise=0.632041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00404898 Jy ! Component: 100 - total flux cleaned = 0.0068519 Jy ! Component: 150 - total flux cleaned = 0.00896062 Jy ! Component: 200 - total flux cleaned = 0.0106016 Jy ! Total flux subtracted in 200 components = 0.0106016 Jy ! Clean residual min=-0.004392 max=0.002727 Jy/beam ! Clean residual mean=-0.000013 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.648274 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109733 Jy ! Component: 100 - total flux cleaned = 0.00174035 Jy ! Component: 150 - total flux cleaned = 0.0021794 Jy ! Component: 200 - total flux cleaned = 0.00240907 Jy ! Total flux subtracted in 200 components = 0.00240907 Jy ! Clean residual min=-0.004384 max=0.002709 Jy/beam ! Clean residual mean=-0.000011 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.650683 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 134 components and 0.650683 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8766 mas, bmaj=2.52 mas, bpa=-5.667 degrees ! Estimated noise=0.514788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000806669 Jy ! Component: 100 - total flux cleaned = -0.000971193 Jy ! Component: 150 - total flux cleaned = -0.000971734 Jy ! Component: 200 - total flux cleaned = -0.000972121 Jy ! Total flux subtracted in 200 components = -0.000972121 Jy ! Clean residual min=-0.003670 max=0.002622 Jy/beam ! Clean residual mean=-0.000006 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.649711 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 149 components and 0.649711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096984Jy sigma=1.030342 ! Fit after self-cal, rms=0.096936Jy sigma=1.029624 wmodel J0539-2839_X_b_map.mod ! Writing 149 model components to file: J0539-2839_X_b_map.mod wobs J0539-2839_X_b_uvs.fits ! Writing UV FITS file: J0539-2839_X_b_uvs.fits wwins J0539-2839_X_b_map.win ! wwins: Wrote 6 windows to J0539-2839_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013958 Jy ! Component: 100 - total flux cleaned = -0.00211322 Jy ! Component: 150 - total flux cleaned = -0.00238463 Jy ! Component: 200 - total flux cleaned = -0.00251335 Jy ! Component: 250 - total flux cleaned = -0.00251311 Jy ! Component: 300 - total flux cleaned = -0.00239247 Jy ! Component: 350 - total flux cleaned = -0.00227401 Jy ! Component: 400 - total flux cleaned = -0.00211858 Jy ! Component: 450 - total flux cleaned = -0.00196578 Jy ! Component: 500 - total flux cleaned = -0.00192799 Jy ! Component: 550 - total flux cleaned = -0.0017794 Jy ! Component: 600 - total flux cleaned = -0.00170628 Jy ! Component: 650 - total flux cleaned = -0.00167079 Jy ! Component: 700 - total flux cleaned = -0.00167115 Jy ! Component: 750 - total flux cleaned = -0.00174118 Jy ! Component: 800 - total flux cleaned = -0.00170647 Jy ! Component: 850 - total flux cleaned = -0.00163868 Jy ! Component: 900 - total flux cleaned = -0.00184235 Jy ! Component: 950 - total flux cleaned = -0.00184263 Jy ! Component: 1000 - total flux cleaned = -0.00200892 Jy ! Component: 1050 - total flux cleaned = -0.00204145 Jy ! Component: 1100 - total flux cleaned = -0.00200873 Jy ! Component: 1150 - total flux cleaned = -0.00200834 Jy ! Component: 1200 - total flux cleaned = -0.00207202 Jy ! Component: 1250 - total flux cleaned = -0.00216657 Jy ! Component: 1300 - total flux cleaned = -0.00213496 Jy ! Component: 1350 - total flux cleaned = -0.00225877 Jy ! Component: 1400 - total flux cleaned = -0.00216692 Jy ! Component: 1450 - total flux cleaned = -0.00228973 Jy ! Component: 1500 - total flux cleaned = -0.00244132 Jy ! Component: 1550 - total flux cleaned = -0.00253136 Jy ! Component: 1600 - total flux cleaned = -0.00268056 Jy ! Component: 1650 - total flux cleaned = -0.00271027 Jy ! Component: 1700 - total flux cleaned = -0.00282795 Jy ! Component: 1750 - total flux cleaned = -0.00300342 Jy ! Component: 1800 - total flux cleaned = -0.00314824 Jy ! Component: 1850 - total flux cleaned = -0.00314796 Jy ! Component: 1900 - total flux cleaned = -0.00334784 Jy ! Component: 1950 - total flux cleaned = -0.00323444 Jy ! Component: 2000 - total flux cleaned = -0.00320625 Jy ! Component: 2050 - total flux cleaned = -0.00329036 Jy ! Component: 2100 - total flux cleaned = -0.00331808 Jy ! Component: 2150 - total flux cleaned = -0.00326234 Jy ! Component: 2200 - total flux cleaned = -0.00320728 Jy ! Component: 2250 - total flux cleaned = -0.00331654 Jy ! Component: 2300 - total flux cleaned = -0.0032624 Jy ! Component: 2350 - total flux cleaned = -0.00323547 Jy ! Component: 2400 - total flux cleaned = -0.00331595 Jy ! Component: 2450 - total flux cleaned = -0.00331584 Jy ! Component: 2500 - total flux cleaned = -0.00328942 Jy ! Component: 2550 - total flux cleaned = -0.00331595 Jy ! Component: 2600 - total flux cleaned = -0.00321099 Jy ! Component: 2650 - total flux cleaned = -0.00331536 Jy ! Component: 2700 - total flux cleaned = -0.00321169 Jy ! Component: 2750 - total flux cleaned = -0.0032375 Jy ! Component: 2800 - total flux cleaned = -0.0032634 Jy ! Component: 2850 - total flux cleaned = -0.00326332 Jy ! Component: 2900 - total flux cleaned = -0.00326321 Jy ! Component: 2950 - total flux cleaned = -0.00328867 Jy ! Component: 3000 - total flux cleaned = -0.00321309 Jy ! Component: 3050 - total flux cleaned = -0.00316284 Jy ! Component: 3100 - total flux cleaned = -0.00316286 Jy ! Component: 3150 - total flux cleaned = -0.00321247 Jy ! Component: 3200 - total flux cleaned = -0.00326188 Jy ! Component: 3250 - total flux cleaned = -0.00326177 Jy ! Component: 3300 - total flux cleaned = -0.00328607 Jy ! Component: 3350 - total flux cleaned = -0.00326183 Jy ! Component: 3400 - total flux cleaned = -0.00323762 Jy ! Component: 3450 - total flux cleaned = -0.00326184 Jy ! Component: 3500 - total flux cleaned = -0.00333365 Jy ! Component: 3550 - total flux cleaned = -0.00330994 Jy ! Component: 3600 - total flux cleaned = -0.00335735 Jy ! Component: 3650 - total flux cleaned = -0.00333374 Jy ! Component: 3700 - total flux cleaned = -0.00345173 Jy ! Component: 3750 - total flux cleaned = -0.00345184 Jy ! Component: 3800 - total flux cleaned = -0.00352208 Jy ! Component: 3850 - total flux cleaned = -0.00359202 Jy ! Component: 3900 - total flux cleaned = -0.00359215 Jy ! Component: 3950 - total flux cleaned = -0.00363835 Jy ! Component: 4000 - total flux cleaned = -0.00375347 Jy ! Component: 4050 - total flux cleaned = -0.00375349 Jy ! Total flux subtracted in 4096 components = -0.00377612 Jy ! Clean residual min=-0.001240 max=0.001341 Jy/beam ! Clean residual mean=-0.000004 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.645935 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 456 components and 0.645935 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0539-2839_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8766 x 2.52 at -5.667 degrees (North through East) ! Clean map min=-0.0021559 max=0.42677 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0539-2839_X_b_map.fits wmodel /vlbi/uf001/uvm//J0539-2839_X_b_map.mod ! Writing 456 model components to file: /vlbi/uf001/uvm//J0539-2839_X_b_map.mod wobs /vlbi/uf001/uvm//J0539-2839_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0539-2839_X_b_uvs.fits wwins /vlbi/uf001/uvm//J0539-2839_X_b_map.win ! wwins: Wrote 7 windows to /vlbi/uf001/uvm//J0539-2839_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.426767 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000406133 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.285495 0.285495 0.570991 1.14198 2.28396 4.56792 9.13585 18.2717 36.5434 73.0868 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.426 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1050.81 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0539-2839_X_b_dfm.log closed on Sun Jan 13 20:52:29 2019