! Started logfile: /vlbi/uf001/uvm//J0536-3401_S_b_dfm.log on Sun Jan 13 20:51:22 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0536-3401_S_b_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0536-3401_S_b_uvm.fits
! AN table 1: 7 integrations on 28 of 28 possible baselines.
! AN table 2: 27 integrations on 45 of 45 possible baselines.
! AN table 3: 27 integrations on 21 of 21 possible baselines.
! AN table 4: 14 integrations on 21 of 21 possible baselines.
! AN table 5: 7 integrations on 15 of 15 possible baselines.
! AN table 6: 7 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.757132 visibilities/baseline/integration-bin.
! Found source: J0536-3401
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5733 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0536-3401_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 139 telescope corrections were flagged in sub-array 2.
!  A total of 104 telescope corrections were flagged in sub-array 3.
!  A total of 45 telescope corrections were flagged in sub-array 4.
!  A total of 20 telescope corrections were flagged in sub-array 5.
!  A total of 9 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 139 telescope corrections were flagged in sub-array 2.
!  A total of 104 telescope corrections were flagged in sub-array 3.
!  A total of 45 telescope corrections were flagged in sub-array 4.
!  A total of 20 telescope corrections were flagged in sub-array 5.
!  A total of 9 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 139 telescope corrections were flagged in sub-array 2.
!  A total of 104 telescope corrections were flagged in sub-array 3.
!  A total of 45 telescope corrections were flagged in sub-array 4.
!  A total of 20 telescope corrections were flagged in sub-array 5.
!  A total of 9 telescope corrections were flagged in sub-array 6.
! 
! Fit before self-cal, rms=1.080721Jy  sigma=14.671023
! Fit after  self-cal, rms=0.643427Jy  sigma=8.442193
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.618 mas, bmaj=7.455 mas, bpa=-1.676 degrees
! Estimated noise=1.28379 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.272245 Jy
! Component: 100  -  total flux cleaned = 0.337995 Jy
! Total flux subtracted in 100 components = 0.337995 Jy
! Clean residual min=-0.020250 max=0.030688 Jy/beam
! Clean residual mean=-0.000108 rms=0.003841 Jy/beam
! Combined flux in latest and established models = 0.337995 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.337995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.139334Jy  sigma=1.783616
! Fit after  self-cal, rms=0.139298Jy  sigma=1.783433
! Inverting map 
! Added new window around map position (-2.5, -10.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0314482 Jy
! Component: 100  -  total flux cleaned = 0.0501666 Jy
! Total flux subtracted in 100 components = 0.0501666 Jy
! Clean residual min=-0.015964 max=0.021780 Jy/beam
! Clean residual mean=-0.000080 rms=0.003261 Jy/beam
! Combined flux in latest and established models = 0.388161 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 22 components and 0.388161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128729Jy  sigma=1.586187
! Fit after  self-cal, rms=0.128385Jy  sigma=1.581126
! Inverting map 
! Added new window around map position (-4.5, 13.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202015 Jy
! Component: 100  -  total flux cleaned = 0.032419 Jy
! Total flux subtracted in 100 components = 0.032419 Jy
! Clean residual min=-0.014033 max=0.017177 Jy/beam
! Clean residual mean=-0.000065 rms=0.002970 Jy/beam
! Combined flux in latest and established models = 0.42058 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 37 components and 0.42058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123780Jy  sigma=1.504746
! Fit after  self-cal, rms=0.123430Jy  sigma=1.499050
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.486 mas, bmaj=10.49 mas, bpa=-3.844 degrees
! Estimated noise=0.918677 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, -12.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0221337 Jy
! Component: 100  -  total flux cleaned = 0.0339286 Jy
! Component: 150  -  total flux cleaned = 0.0394017 Jy
! Component: 200  -  total flux cleaned = 0.0407966 Jy
! Total flux subtracted in 200 components = 0.0407966 Jy
! Clean residual min=-0.009418 max=0.010931 Jy/beam
! Clean residual mean=-0.000094 rms=0.002706 Jy/beam
! Combined flux in latest and established models = 0.461377 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 71 components and 0.461377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.119137Jy  sigma=1.442486
! Fit after  self-cal, rms=0.119074Jy  sigma=1.440409
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.486 x 10.49 at -3.844 degrees (North through East)
! Clean map  min=-0.0095575  max=0.34034 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.31     KP        0.96     LA        0.99     
!   NL        0.96     OV        0.95     PT        1.05     SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.94     HN        1.32     KP        1.05     
!   LA        0.97     MK        1.03     NL        1.24     OV        0.93     
!   PT        1.01     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.90     HN        1.16     KP        0.96     LA        0.93     
!   NL        1.16     OV        0.87     PT        1.03     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.10     FD        0.90     KP        1.00     LA        0.92     
!   MK        0.96     NL        1.29     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 5:
!   FD        0.94     HN        1.18     KP        0.95     LA        0.85     
!   NL        1.11     PT        1.10     
! 
!  Telescope amplitude corrections in sub-array 6:
!   BR        0.90     FD        0.91     KP        0.89     LA        0.92     
!   MK        0.96     NL        1.07     OV        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.33     KP        1.01     LA        1.03     
!   NL        0.98     OV        0.95     PT        1.06     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.54     FD        0.99     HN        1.32     KP        1.07     
!   LA        1.01     MK        0.94     NL        1.22     OV        0.82     
!   PT        0.98     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.99     HN        1.13     KP        1.04     LA        0.92     
!   NL        1.07     OV        0.82     PT        1.04     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.75     FD        0.95     KP        0.97     LA        0.94     
!   MK        1.00     NL        0.80     PT        1.04     
! 
!  Telescope amplitude corrections in sub-array 5:
!   FD        0.93     HN        1.23     KP        0.92     LA        0.97     
!   NL        0.61     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.68     FD        1.08     KP        0.95     LA        0.98     
!   MK        1.02     NL        1.02     OV        0.85     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        1.26     KP        1.07     LA        0.99     
!   NL        0.92     OV        0.95     PT        1.08     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.22     FD        0.97     HN        1.37     KP        1.03     
!   LA        1.01     MK        0.98     NL        1.20     OV        0.90     
!   PT        1.02     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.02     HN        1.16     KP        1.00     LA        0.97     
!   NL        1.11     OV        0.88     PT        1.04     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.26     FD        0.94     KP        1.05     LA        0.95     
!   MK        1.04     NL        1.10     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 5:
!   FD        0.88     HN        1.25     KP        1.00     LA        0.92     
!   NL        0.95     PT        1.05     
! 
!  Telescope amplitude corrections in sub-array 6:
!   BR        1.03     FD        1.00     KP        0.92     LA        0.93     
!   MK        0.95     NL        1.18     OV        0.91     
! 
! 
! Fit before self-cal, rms=0.119074Jy  sigma=1.440409
! Fit after  self-cal, rms=0.118256Jy  sigma=1.237811
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.498 mas, bmaj=10.55 mas, bpa=-3.751 degrees
! Estimated noise=0.936352 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00623915 Jy
! Component: 100  -  total flux cleaned = -0.00712762 Jy
! Component: 150  -  total flux cleaned = -0.00788306 Jy
! Component: 200  -  total flux cleaned = -0.0082853 Jy
! Total flux subtracted in 200 components = -0.0082853 Jy
! Clean residual min=-0.006112 max=0.006141 Jy/beam
! Clean residual mean=-0.000015 rms=0.001491 Jy/beam
! Combined flux in latest and established models = 0.453092 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 96 components and 0.453092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117613Jy  sigma=1.230144
! Fit after  self-cal, rms=0.117930Jy  sigma=1.228576
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117930Jy  sigma=1.228576
! Fit after  self-cal, rms=0.118528Jy  sigma=1.199556
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.503 mas, bmaj=10.53 mas, bpa=-3.751 degrees
! Estimated noise=0.936164 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00312039 Jy
! Component: 100  -  total flux cleaned = -0.0036822 Jy
! Component: 150  -  total flux cleaned = -0.00404032 Jy
! Component: 200  -  total flux cleaned = -0.00445904 Jy
! Total flux subtracted in 200 components = -0.00445904 Jy
! Clean residual min=-0.005679 max=0.005142 Jy/beam
! Clean residual mean=-0.000008 rms=0.001298 Jy/beam
! Combined flux in latest and established models = 0.448633 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 111 components and 0.448633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118199Jy  sigma=1.194852
! Fit after  self-cal, rms=0.118220Jy  sigma=1.194595
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000380112 Jy
! Component: 100  -  total flux cleaned = -0.000467122 Jy
! Component: 150  -  total flux cleaned = -0.000628652 Jy
! Component: 200  -  total flux cleaned = -0.000849804 Jy
! Total flux subtracted in 200 components = -0.000849804 Jy
! Clean residual min=-0.005536 max=0.004973 Jy/beam
! Clean residual mean=-0.000009 rms=0.001280 Jy/beam
! Combined flux in latest and established models = 0.447783 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 131 components and 0.447783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118098Jy  sigma=1.192882
! Fit after  self-cal, rms=0.118090Jy  sigma=1.192809
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118090Jy  sigma=1.192809
! Fit after  self-cal, rms=0.120487Jy  sigma=1.166951
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.505 mas, bmaj=10.54 mas, bpa=-3.762 degrees
! Estimated noise=0.936484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00266557 Jy
! Component: 100  -  total flux cleaned = -0.00331572 Jy
! Component: 150  -  total flux cleaned = -0.00372037 Jy
! Component: 200  -  total flux cleaned = -0.00415194 Jy
! Total flux subtracted in 200 components = -0.00415194 Jy
! Clean residual min=-0.005133 max=0.004894 Jy/beam
! Clean residual mean=-0.000003 rms=0.001187 Jy/beam
! Combined flux in latest and established models = 0.443631 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 146 components and 0.443631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.120318Jy  sigma=1.165067
! Fit after  self-cal, rms=0.120358Jy  sigma=1.164898
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000473942 Jy
! Component: 100  -  total flux cleaned = -0.000726923 Jy
! Component: 150  -  total flux cleaned = -0.000950163 Jy
! Component: 200  -  total flux cleaned = -0.0010535 Jy
! Total flux subtracted in 200 components = -0.0010535 Jy
! Clean residual min=-0.005009 max=0.004830 Jy/beam
! Clean residual mean=-0.000005 rms=0.001179 Jy/beam
! Combined flux in latest and established models = 0.442577 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 155 components and 0.442577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.120292Jy  sigma=1.164146
! Fit after  self-cal, rms=0.120283Jy  sigma=1.164104
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.120283Jy  sigma=1.164104
! Fit after  self-cal, rms=0.119876Jy  sigma=1.160819
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.682 mas, bmaj=25.86 mas, bpa=-0.7749 degrees
! Estimated noise=1.10798 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00199721 Jy
! Component: 100  -  total flux cleaned = -0.00238176 Jy
! Component: 150  -  total flux cleaned = -0.00242352 Jy
! Component: 200  -  total flux cleaned = -0.00242293 Jy
! Total flux subtracted in 200 components = -0.00242293 Jy
! Clean residual min=-0.004257 max=0.004658 Jy/beam
! Clean residual mean=-0.000001 rms=0.001339 Jy/beam
! Combined flux in latest and established models = 0.440154 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 175 components and 0.440154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.119832Jy  sigma=1.160282
! Fit after  self-cal, rms=0.119828Jy  sigma=1.160245
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.55028e-05 Jy
! Component: 100  -  total flux cleaned = -1.16553e-06 Jy
! Component: 150  -  total flux cleaned = -2.83968e-06 Jy
! Component: 200  -  total flux cleaned = -3.61436e-06 Jy
! Total flux subtracted in 200 components = -3.61436e-06 Jy
! Clean residual min=-0.004214 max=0.004660 Jy/beam
! Clean residual mean=-0.000001 rms=0.001338 Jy/beam
! Combined flux in latest and established models = 0.440151 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 180 components and 0.440151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.119811Jy  sigma=1.160006
! Fit after  self-cal, rms=0.119807Jy  sigma=1.159987
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.506 mas, bmaj=10.54 mas, bpa=-3.784 degrees
! Estimated noise=0.93616 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.506 x 10.54 at -3.784 degrees (North through East)
! Clean map  min=-0.0049708  max=0.35348 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.612 mas, bmaj=7.401 mas, bpa=-1.528 degrees
! Estimated noise=1.33009 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.281826 Jy
! Component: 100  -  total flux cleaned = 0.351004 Jy
! Component: 150  -  total flux cleaned = 0.38006 Jy
! Component: 200  -  total flux cleaned = 0.396609 Jy
! Total flux subtracted in 200 components = 0.396609 Jy
! Clean residual min=-0.008400 max=0.009954 Jy/beam
! Clean residual mean=-0.000030 rms=0.001838 Jy/beam
! Combined flux in latest and established models = 0.396609 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.396609 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.506 mas, bmaj=10.54 mas, bpa=-3.784 degrees
! Estimated noise=0.93616 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0177381 Jy
! Component: 100  -  total flux cleaned = 0.0278279 Jy
! Component: 150  -  total flux cleaned = 0.0341477 Jy
! Component: 200  -  total flux cleaned = 0.0378383 Jy
! Total flux subtracted in 200 components = 0.0378383 Jy
! Clean residual min=-0.004678 max=0.004714 Jy/beam
! Clean residual mean=-0.000016 rms=0.001190 Jy/beam
! Combined flux in latest and established models = 0.434447 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 62 components and 0.434447 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.682 mas, bmaj=25.86 mas, bpa=-0.7749 degrees
! Estimated noise=1.10798 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00348673 Jy
! Component: 100  -  total flux cleaned = 0.00526082 Jy
! Component: 150  -  total flux cleaned = 0.005788 Jy
! Component: 200  -  total flux cleaned = 0.00582721 Jy
! Total flux subtracted in 200 components = 0.00582721 Jy
! Clean residual min=-0.003958 max=0.004553 Jy/beam
! Clean residual mean=-0.000001 rms=0.001325 Jy/beam
! Combined flux in latest and established models = 0.440274 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.78066e-05 Jy
! Component: 100  -  total flux cleaned = 7.22674e-05 Jy
! Component: 150  -  total flux cleaned = 0.000105568 Jy
! Component: 200  -  total flux cleaned = 0.000137179 Jy
! Total flux subtracted in 200 components = 0.000137179 Jy
! Clean residual min=-0.003891 max=0.004563 Jy/beam
! Clean residual mean=-0.000001 rms=0.001318 Jy/beam
! Combined flux in latest and established models = 0.440412 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 81 components and 0.440412 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.506 mas, bmaj=10.54 mas, bpa=-3.784 degrees
! Estimated noise=0.93616 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000953362 Jy
! Component: 100  -  total flux cleaned = -0.000865371 Jy
! Component: 150  -  total flux cleaned = -0.000792225 Jy
! Component: 200  -  total flux cleaned = -0.000790789 Jy
! Total flux subtracted in 200 components = -0.000790789 Jy
! Clean residual min=-0.004277 max=0.004830 Jy/beam
! Clean residual mean=-0.000003 rms=0.001127 Jy/beam
! Combined flux in latest and established models = 0.439621 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 99 components and 0.439621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.119942Jy  sigma=1.160670
! Fit after  self-cal, rms=0.119857Jy  sigma=1.160370
wmodel J0536-3401_S_b_map.mod
! Writing 99 model components to file: J0536-3401_S_b_map.mod
wobs   J0536-3401_S_b_uvs.fits
! Writing UV FITS file: J0536-3401_S_b_uvs.fits
wwins  J0536-3401_S_b_map.win
! wwins: Wrote 4 windows to J0536-3401_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00148494 Jy
! Component: 100  -  total flux cleaned = 0.00232677 Jy
! Component: 150  -  total flux cleaned = 0.00253669 Jy
! Component: 200  -  total flux cleaned = 0.00314609 Jy
! Component: 250  -  total flux cleaned = 0.00353799 Jy
! Component: 300  -  total flux cleaned = 0.00385961 Jy
! Component: 350  -  total flux cleaned = 0.00454981 Jy
! Component: 400  -  total flux cleaned = 0.00503974 Jy
! Component: 450  -  total flux cleaned = 0.00533831 Jy
! Component: 500  -  total flux cleaned = 0.00539686 Jy
! Component: 550  -  total flux cleaned = 0.00562935 Jy
! Component: 600  -  total flux cleaned = 0.00557164 Jy
! Component: 650  -  total flux cleaned = 0.00562788 Jy
! Component: 700  -  total flux cleaned = 0.00568375 Jy
! Component: 750  -  total flux cleaned = 0.00579454 Jy
! Component: 800  -  total flux cleaned = 0.00595515 Jy
! Component: 850  -  total flux cleaned = 0.00584694 Jy
! Component: 900  -  total flux cleaned = 0.00600428 Jy
! Component: 950  -  total flux cleaned = 0.00584728 Jy
! Component: 1000  -  total flux cleaned = 0.00579584 Jy
! Component: 1050  -  total flux cleaned = 0.00589852 Jy
! Component: 1100  -  total flux cleaned = 0.00584865 Jy
! Component: 1150  -  total flux cleaned = 0.00604899 Jy
! Component: 1200  -  total flux cleaned = 0.00609798 Jy
! Component: 1250  -  total flux cleaned = 0.00599959 Jy
! Component: 1300  -  total flux cleaned = 0.00604799 Jy
! Component: 1350  -  total flux cleaned = 0.006289 Jy
! Component: 1400  -  total flux cleaned = 0.00633677 Jy
! Component: 1450  -  total flux cleaned = 0.0063838 Jy
! Component: 1500  -  total flux cleaned = 0.00643107 Jy
! Component: 1550  -  total flux cleaned = 0.0065244 Jy
! Component: 1600  -  total flux cleaned = 0.00657031 Jy
! Component: 1650  -  total flux cleaned = 0.00679989 Jy
! Component: 1700  -  total flux cleaned = 0.00689139 Jy
! Component: 1750  -  total flux cleaned = 0.00689157 Jy
! Component: 1800  -  total flux cleaned = 0.00707154 Jy
! Component: 1850  -  total flux cleaned = 0.00707184 Jy
! Component: 1900  -  total flux cleaned = 0.00720451 Jy
! Component: 1950  -  total flux cleaned = 0.00716126 Jy
! Component: 2000  -  total flux cleaned = 0.00729215 Jy
! Component: 2050  -  total flux cleaned = 0.0075087 Jy
! Component: 2100  -  total flux cleaned = 0.00755165 Jy
! Component: 2150  -  total flux cleaned = 0.00772202 Jy
! Component: 2200  -  total flux cleaned = 0.00768029 Jy
! Component: 2250  -  total flux cleaned = 0.00789095 Jy
! Component: 2300  -  total flux cleaned = 0.00776528 Jy
! Component: 2350  -  total flux cleaned = 0.00813993 Jy
! Component: 2400  -  total flux cleaned = 0.00793333 Jy
! Component: 2450  -  total flux cleaned = 0.008098 Jy
! Component: 2500  -  total flux cleaned = 0.00817957 Jy
! Component: 2550  -  total flux cleaned = 0.00817976 Jy
! Component: 2600  -  total flux cleaned = 0.00817941 Jy
! Component: 2650  -  total flux cleaned = 0.00821985 Jy
! Component: 2700  -  total flux cleaned = 0.00837973 Jy
! Component: 2750  -  total flux cleaned = 0.00857911 Jy
! Component: 2800  -  total flux cleaned = 0.0084602 Jy
! Component: 2850  -  total flux cleaned = 0.00846058 Jy
! Component: 2900  -  total flux cleaned = 0.00865622 Jy
! Component: 2950  -  total flux cleaned = 0.00869495 Jy
! Component: 3000  -  total flux cleaned = 0.00869469 Jy
! Component: 3050  -  total flux cleaned = 0.00881092 Jy
! Component: 3100  -  total flux cleaned = 0.00884924 Jy
! Component: 3150  -  total flux cleaned = 0.00877269 Jy
! Component: 3200  -  total flux cleaned = 0.00896287 Jy
! Component: 3250  -  total flux cleaned = 0.00907616 Jy
! Component: 3300  -  total flux cleaned = 0.00926403 Jy
! Component: 3350  -  total flux cleaned = 0.00930144 Jy
! Component: 3400  -  total flux cleaned = 0.00933829 Jy
! Component: 3450  -  total flux cleaned = 0.00933821 Jy
! Component: 3500  -  total flux cleaned = 0.00930172 Jy
! Component: 3550  -  total flux cleaned = 0.00933884 Jy
! Component: 3600  -  total flux cleaned = 0.00944883 Jy
! Component: 3650  -  total flux cleaned = 0.00952112 Jy
! Component: 3700  -  total flux cleaned = 0.00973837 Jy
! Component: 3750  -  total flux cleaned = 0.00973843 Jy
! Component: 3800  -  total flux cleaned = 0.00988184 Jy
! Component: 3850  -  total flux cleaned = 0.00988189 Jy
! Component: 3900  -  total flux cleaned = 0.0099533 Jy
! Component: 3950  -  total flux cleaned = 0.0101653 Jy
! Component: 4000  -  total flux cleaned = 0.0100948 Jy
! Component: 4050  -  total flux cleaned = 0.0102349 Jy
! Total flux subtracted in 4096 components = 0.0102699 Jy
! Clean residual min=-0.001843 max=0.002240 Jy/beam
! Clean residual mean=-0.000002 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.449891 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 381 components and 0.44989 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0536-3401_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.506 x 10.54 at -3.784 degrees (North through East)
! Clean map  min=-0.0036932  max=0.36193 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0536-3401_S_b_map.fits
wmodel /vlbi/uf001/uvm//J0536-3401_S_b_map.mod
! Writing 381 model components to file: /vlbi/uf001/uvm//J0536-3401_S_b_map.mod
wobs   /vlbi/uf001/uvm//J0536-3401_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0536-3401_S_b_uvs.fits
wwins  /vlbi/uf001/uvm//J0536-3401_S_b_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uvm//J0536-3401_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.361933 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000670354 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.555645 0.555645 1.11129 2.22258 4.44516 8.89032 17.7806 35.5613 71.1225
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.361 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  539.913 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0536-3401_S_b_dfm.log closed on Sun Jan 13 20:51:26 2019