! Started logfile: /vlbi/uf001/uvm//J0534-3950_X_a_dfm.log on Sun Jan 13 20:50:56 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0534-3950_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0534-3950_X_a_uvm.fits ! AN table 1: 68 integrations on 36 of 36 possible baselines. ! AN table 2: 74 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.875812 visibilities/baseline/integration-bin. ! Found source: J0534-3950 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 42060 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0534-3950_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! A total of 50 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 68 telescope corrections were flagged in sub-array 1. ! A total of 50 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! A total of 50 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 68 telescope corrections were flagged in sub-array 1. ! A total of 50 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 68 telescope corrections were flagged in sub-array 1. ! A total of 50 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 68 telescope corrections were flagged in sub-array 1. ! A total of 50 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 68 telescope corrections were flagged in sub-array 1. ! A total of 50 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 68 telescope corrections were flagged in sub-array 1. ! A total of 50 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 68 telescope corrections were flagged in sub-array 1. ! A total of 50 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 68 telescope corrections were flagged in sub-array 1. ! A total of 50 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 68 telescope corrections were flagged in sub-array 1. ! A total of 50 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 68 telescope corrections were flagged in sub-array 1. ! A total of 50 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.005708Jy sigma=16.717900 ! Fit after self-cal, rms=0.934225Jy sigma=15.436434 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5454 mas, bmaj=1.598 mas, bpa=-9.301 degrees ! Estimated noise=0.579025 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0515896 Jy ! Component: 100 - total flux cleaned = 0.0635087 Jy ! Total flux subtracted in 100 components = 0.0635087 Jy ! Clean residual min=-0.004628 max=0.007076 Jy/beam ! Clean residual mean=0.000009 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.0635087 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0635087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084004Jy sigma=1.222187 ! Fit after self-cal, rms=0.083297Jy sigma=1.211020 ! Inverting map ! Added new window around map position (0.8, -7.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00668342 Jy ! Component: 100 - total flux cleaned = 0.0100085 Jy ! Total flux subtracted in 100 components = 0.0100085 Jy ! Clean residual min=-0.004516 max=0.005237 Jy/beam ! Clean residual mean=0.000006 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.0735172 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 14 components and 0.0735172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082676Jy sigma=1.192313 ! Fit after self-cal, rms=0.082626Jy sigma=1.191143 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.779 mas, bmaj=2.175 mas, bpa=-9.624 degrees ! Estimated noise=0.218802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00725676 Jy ! Component: 100 - total flux cleaned = 0.011083 Jy ! Component: 150 - total flux cleaned = 0.0133044 Jy ! Component: 200 - total flux cleaned = 0.0145286 Jy ! Total flux subtracted in 200 components = 0.0145286 Jy ! Clean residual min=-0.002774 max=0.005703 Jy/beam ! Clean residual mean=0.000012 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.0880458 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 41 components and 0.0880458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082156Jy sigma=1.177007 ! Fit after self-cal, rms=0.082077Jy sigma=1.174922 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.779 x 2.175 at -9.624 degrees (North through East) ! Clean map min=-0.0025043 max=0.066647 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.90 HN 1.09 KP 0.99 LA 1.05 ! MK 0.98 NL 1.35 OV 0.90 PT 0.96 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.23 KP 1.00 LA 0.95 ! MK 1.15 NL 1.33 PT 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.91 HN 1.36 KP 0.96 LA 1.02 ! MK 1.01 NL 1.46 OV 0.90 PT 0.97 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.11 KP 0.99 LA 1.01 ! MK 1.08 NL 1.40 PT 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.29 KP 0.98 LA 0.98 ! MK 0.99 NL 1.60 OV 0.88 PT 1.01 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HN 1.23 KP 1.02 LA 0.94 ! MK 1.04 NL 1.41 PT 0.86 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.28 KP 1.03 LA 1.00 ! MK 1.01 NL 1.42 OV 0.92 PT 0.94 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.00 KP 1.02 LA 0.98 ! MK 1.05 NL 1.48 PT 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.26 KP 1.04 LA 0.99 ! MK 0.99 NL 1.37 OV 0.86 PT 0.92 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.10 KP 0.98 LA 1.03 ! MK 1.12 NL 1.43 PT 0.87 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 0.91 HN 1.23 KP 1.06 LA 1.02 ! MK 0.97 NL 1.48 OV 0.88 PT 0.91 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.10 KP 1.01 LA 0.98 ! MK 1.11 NL 1.30 PT 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 0.87 HN 1.16 KP 0.97 LA 0.99 ! MK 0.97 NL 1.40 OV 0.89 PT 0.96 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 HN 0.93 KP 1.04 LA 0.99 ! MK 1.06 NL 1.33 PT 0.88 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 HN 1.13 KP 0.99 LA 1.07 ! MK 1.05 NL 1.54 OV 0.81 PT 0.96 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.89 HN 0.99 KP 1.03 LA 1.01 ! MK 1.00 NL 1.40 PT 0.90 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.30 KP 0.98 LA 1.00 ! MK 0.91 NL 1.39 OV 0.86 PT 0.94 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.12 KP 0.99 LA 0.93 ! MK 0.98 NL 1.30 PT 0.91 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! FD 0.88 HN 1.12 KP 1.01 LA 1.03 ! MK 1.02 NL 1.51 OV 0.86 PT 0.93 ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.02 KP 1.04 LA 0.95 ! MK 1.00 NL 1.23 PT 0.88 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 HN 1.34 KP 0.95 LA 1.00 ! MK 1.02 NL 1.37 OV 0.93 PT 0.87 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.91 HN 0.97 KP 1.02 LA 0.93 ! MK 0.95 NL 1.34 PT 0.92 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! FD 0.90 HN 1.05 KP 1.01 LA 0.98 ! MK 0.90 NL 1.46 OV 0.83 PT 1.03 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 0.95 KP 0.96 LA 1.02 ! MK 0.90 NL 1.16 PT 0.95 ! ! ! Fit before self-cal, rms=0.082077Jy sigma=1.174922 ! Fit after self-cal, rms=0.093682Jy sigma=1.159738 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7848 mas, bmaj=2.162 mas, bpa=-9.213 degrees ! Estimated noise=0.221015 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010618 Jy ! Component: 100 - total flux cleaned = -0.00116744 Jy ! Component: 150 - total flux cleaned = -0.0012279 Jy ! Component: 200 - total flux cleaned = -0.0013114 Jy ! Total flux subtracted in 200 components = -0.0013114 Jy ! Clean residual min=-0.001335 max=0.001355 Jy/beam ! Clean residual mean=-0.000000 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.0867344 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 0.0867344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093649Jy sigma=1.159208 ! Fit after self-cal, rms=0.094117Jy sigma=1.158209 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094117Jy sigma=1.158209 ! Fit after self-cal, rms=0.096269Jy sigma=1.155851 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7877 mas, bmaj=2.174 mas, bpa=-9.064 degrees ! Estimated noise=0.221305 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000495541 Jy ! Component: 100 - total flux cleaned = -0.000588147 Jy ! Component: 150 - total flux cleaned = -0.000588158 Jy ! Component: 200 - total flux cleaned = -0.000587685 Jy ! Total flux subtracted in 200 components = -0.000587685 Jy ! Clean residual min=-0.001045 max=0.001277 Jy/beam ! Clean residual mean=0.000004 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.0861467 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 70 components and 0.0861467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096258Jy sigma=1.155658 ! Fit after self-cal, rms=0.096318Jy sigma=1.155470 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000802577 Jy ! Component: 100 - total flux cleaned = 0.000706777 Jy ! Component: 150 - total flux cleaned = 0.000664418 Jy ! Component: 200 - total flux cleaned = 0.000604599 Jy ! Total flux subtracted in 200 components = 0.000604599 Jy ! Clean residual min=-0.000986 max=0.001082 Jy/beam ! Clean residual mean=0.000003 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.0867513 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 84 components and 0.0867513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096294Jy sigma=1.155209 ! Fit after self-cal, rms=0.096300Jy sigma=1.155171 ! Inverting map ! Added new window around map position (-48.6, -20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100285 Jy ! Component: 100 - total flux cleaned = 0.0011073 Jy ! Component: 150 - total flux cleaned = 0.00106364 Jy ! Component: 200 - total flux cleaned = 0.000983483 Jy ! Total flux subtracted in 200 components = 0.000983483 Jy ! Clean residual min=-0.000973 max=0.001104 Jy/beam ! Clean residual mean=0.000003 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.0877348 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 99 components and 0.0877348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096277Jy sigma=1.154951 ! Fit after self-cal, rms=0.096282Jy sigma=1.154915 ! Inverting map ! Added new window around map position (29.4, -40.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000961188 Jy ! Component: 100 - total flux cleaned = 0.00118337 Jy ! Component: 150 - total flux cleaned = 0.00114095 Jy ! Component: 200 - total flux cleaned = 0.00110197 Jy ! Total flux subtracted in 200 components = 0.00110197 Jy ! Clean residual min=-0.000938 max=0.001024 Jy/beam ! Clean residual mean=0.000003 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.0888368 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 108 components and 0.0888368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096264Jy sigma=1.154699 ! Fit after self-cal, rms=0.096264Jy sigma=1.154662 ! Inverting map ! Added new window around map position (-44.2, 29.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000792053 Jy ! Component: 100 - total flux cleaned = 0.00086363 Jy ! Component: 150 - total flux cleaned = 0.000843106 Jy ! Component: 200 - total flux cleaned = 0.000843683 Jy ! Total flux subtracted in 200 components = 0.000843683 Jy ! Clean residual min=-0.000917 max=0.000938 Jy/beam ! Clean residual mean=0.000003 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.0896805 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 121 components and 0.0896805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096245Jy sigma=1.154460 ! Fit after self-cal, rms=0.096242Jy sigma=1.154434 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096242Jy sigma=1.154434 ! Fit after self-cal, rms=0.097104Jy sigma=1.154321 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7884 mas, bmaj=2.175 mas, bpa=-9.055 degrees ! Estimated noise=0.221254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000522137 Jy ! Component: 100 - total flux cleaned = 0.000636121 Jy ! Component: 150 - total flux cleaned = 0.000595058 Jy ! Component: 200 - total flux cleaned = 0.000555567 Jy ! Total flux subtracted in 200 components = 0.000555567 Jy ! Clean residual min=-0.000893 max=0.000926 Jy/beam ! Clean residual mean=0.000002 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.090236 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 127 components and 0.0902361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097089Jy sigma=1.154182 ! Fit after self-cal, rms=0.097105Jy sigma=1.154164 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113808 Jy ! Component: 100 - total flux cleaned = 7.48369e-05 Jy ! Component: 150 - total flux cleaned = 3.73626e-05 Jy ! Component: 200 - total flux cleaned = 1.44776e-06 Jy ! Total flux subtracted in 200 components = 1.44776e-06 Jy ! Clean residual min=-0.000893 max=0.000938 Jy/beam ! Clean residual mean=0.000001 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.0902375 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 131 components and 0.0902375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097094Jy sigma=1.154072 ! Fit after self-cal, rms=0.097093Jy sigma=1.154067 ! Inverting map ! Added new window around map position (40.2, 24.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000821619 Jy ! Component: 100 - total flux cleaned = 0.000862017 Jy ! Component: 150 - total flux cleaned = 0.000843612 Jy ! Component: 200 - total flux cleaned = 0.000843625 Jy ! Total flux subtracted in 200 components = 0.000843625 Jy ! Clean residual min=-0.000880 max=0.000866 Jy/beam ! Clean residual mean=0.000000 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.0910811 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 145 components and 0.0910811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097078Jy sigma=1.153869 ! Fit after self-cal, rms=0.097086Jy sigma=1.153845 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097086Jy sigma=1.153845 ! Fit after self-cal, rms=0.097228Jy sigma=1.153813 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.626 mas, bmaj=9.072 mas, bpa=-1.506 degrees ! Estimated noise=0.277471 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395531 Jy ! Component: 100 - total flux cleaned = 0.000394869 Jy ! Component: 150 - total flux cleaned = 0.000381103 Jy ! Component: 200 - total flux cleaned = 0.000380283 Jy ! Total flux subtracted in 200 components = 0.000380283 Jy ! Clean residual min=-0.000711 max=0.000844 Jy/beam ! Clean residual mean=0.000000 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.0914614 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 157 components and 0.0914614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097223Jy sigma=1.153785 ! Fit after self-cal, rms=0.097234Jy sigma=1.153766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.6824e-05 Jy ! Component: 100 - total flux cleaned = 0.000108884 Jy ! Component: 150 - total flux cleaned = 0.000130902 Jy ! Component: 200 - total flux cleaned = 0.000141205 Jy ! Total flux subtracted in 200 components = 0.000141205 Jy ! Clean residual min=-0.000677 max=0.000836 Jy/beam ! Clean residual mean=-0.000000 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.0916026 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 160 components and 0.0916026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097230Jy sigma=1.153770 ! Fit after self-cal, rms=0.097230Jy sigma=1.153761 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7885 mas, bmaj=2.174 mas, bpa=-9.062 degrees ! Estimated noise=0.221017 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7885 x 2.174 at -9.062 degrees (North through East) ! Clean map min=-0.001218 max=0.066936 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5464 mas, bmaj=1.582 mas, bpa=-8.441 degrees ! Estimated noise=0.596043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0529682 Jy ! Component: 100 - total flux cleaned = 0.0657978 Jy ! Component: 150 - total flux cleaned = 0.0723426 Jy ! Component: 200 - total flux cleaned = 0.0764941 Jy ! Total flux subtracted in 200 components = 0.0764941 Jy ! Clean residual min=-0.003293 max=0.003570 Jy/beam ! Clean residual mean=0.000004 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.0764941 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0764941 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7885 mas, bmaj=2.174 mas, bpa=-9.062 degrees ! Estimated noise=0.221017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443196 Jy ! Component: 100 - total flux cleaned = 0.00690619 Jy ! Component: 150 - total flux cleaned = 0.00883934 Jy ! Component: 200 - total flux cleaned = 0.0104633 Jy ! Total flux subtracted in 200 components = 0.0104633 Jy ! Clean residual min=-0.001158 max=0.001401 Jy/beam ! Clean residual mean=0.000008 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.0869574 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 42 components and 0.0869574 Jy ! Inverting map ! Added new window around map position (1.6, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150042 Jy ! Component: 100 - total flux cleaned = 0.00258319 Jy ! Component: 150 - total flux cleaned = 0.00314877 Jy ! Component: 200 - total flux cleaned = 0.00350622 Jy ! Total flux subtracted in 200 components = 0.00350622 Jy ! Clean residual min=-0.001079 max=0.000929 Jy/beam ! Clean residual mean=0.000003 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.0904636 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 64 components and 0.0904637 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.626 mas, bmaj=9.072 mas, bpa=-1.506 degrees ! Estimated noise=0.277471 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000867212 Jy ! Component: 100 - total flux cleaned = 0.0010442 Jy ! Component: 150 - total flux cleaned = 0.00117901 Jy ! Component: 200 - total flux cleaned = 0.00127871 Jy ! Total flux subtracted in 200 components = 0.00127871 Jy ! Clean residual min=-0.000810 max=0.000830 Jy/beam ! Clean residual mean=0.000001 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.0917424 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.83315e-05 Jy ! Component: 100 - total flux cleaned = 1.794e-05 Jy ! Component: 150 - total flux cleaned = 3.43026e-05 Jy ! Component: 200 - total flux cleaned = 4.95166e-05 Jy ! Total flux subtracted in 200 components = 4.95166e-05 Jy ! Clean residual min=-0.000777 max=0.000824 Jy/beam ! Clean residual mean=0.000001 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0917919 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 92 components and 0.0917919 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7885 mas, bmaj=2.174 mas, bpa=-9.062 degrees ! Estimated noise=0.221017 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104963 Jy ! Component: 100 - total flux cleaned = -0.000103127 Jy ! Component: 150 - total flux cleaned = -0.000102816 Jy ! Component: 200 - total flux cleaned = -0.000130773 Jy ! Total flux subtracted in 200 components = -0.000130773 Jy ! Clean residual min=-0.001016 max=0.000935 Jy/beam ! Clean residual mean=0.000000 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.0916611 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 110 components and 0.0916611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097268Jy sigma=1.154211 ! Fit after self-cal, rms=0.097254Jy sigma=1.154077 wmodel J0534-3950_X_a_map.mod ! Writing 110 model components to file: J0534-3950_X_a_map.mod wobs J0534-3950_X_a_uvs.fits ! Writing UV FITS file: J0534-3950_X_a_uvs.fits wwins J0534-3950_X_a_map.win ! wwins: Wrote 9 windows to J0534-3950_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127687 Jy ! Component: 100 - total flux cleaned = -0.000192379 Jy ! Component: 150 - total flux cleaned = -0.000347045 Jy ! Component: 200 - total flux cleaned = -0.000497329 Jy ! Component: 250 - total flux cleaned = -0.00067365 Jy ! Component: 300 - total flux cleaned = -0.000831769 Jy ! Component: 350 - total flux cleaned = -0.000944665 Jy ! Component: 400 - total flux cleaned = -0.00105551 Jy ! Component: 450 - total flux cleaned = -0.00116439 Jy ! Component: 500 - total flux cleaned = -0.00123147 Jy ! Component: 550 - total flux cleaned = -0.00132398 Jy ! Component: 600 - total flux cleaned = -0.00138892 Jy ! Component: 650 - total flux cleaned = -0.00144015 Jy ! Component: 700 - total flux cleaned = -0.00151637 Jy ! Component: 750 - total flux cleaned = -0.00157905 Jy ! Component: 800 - total flux cleaned = -0.00160384 Jy ! Component: 850 - total flux cleaned = -0.0016162 Jy ! Component: 900 - total flux cleaned = -0.00165275 Jy ! Component: 950 - total flux cleaned = -0.00161675 Jy ! Component: 1000 - total flux cleaned = -0.00164074 Jy ! Component: 1050 - total flux cleaned = -0.00164078 Jy ! Component: 1100 - total flux cleaned = -0.00164082 Jy ! Component: 1150 - total flux cleaned = -0.00161768 Jy ! Component: 1200 - total flux cleaned = -0.00161779 Jy ! Component: 1250 - total flux cleaned = -0.00162918 Jy ! Component: 1300 - total flux cleaned = -0.00160655 Jy ! Component: 1350 - total flux cleaned = -0.00162917 Jy ! Component: 1400 - total flux cleaned = -0.00162909 Jy ! Component: 1450 - total flux cleaned = -0.00164029 Jy ! Component: 1500 - total flux cleaned = -0.00165138 Jy ! Component: 1550 - total flux cleaned = -0.00164041 Jy ! Component: 1600 - total flux cleaned = -0.0016404 Jy ! Component: 1650 - total flux cleaned = -0.00166212 Jy ! Component: 1700 - total flux cleaned = -0.00165128 Jy ! Component: 1750 - total flux cleaned = -0.00169404 Jy ! Component: 1800 - total flux cleaned = -0.00170455 Jy ! Component: 1850 - total flux cleaned = -0.00168344 Jy ! Component: 1900 - total flux cleaned = -0.00171501 Jy ! Component: 1950 - total flux cleaned = -0.0017254 Jy ! Component: 2000 - total flux cleaned = -0.00173583 Jy ! Component: 2050 - total flux cleaned = -0.00171537 Jy ! Component: 2100 - total flux cleaned = -0.00171542 Jy ! Component: 2150 - total flux cleaned = -0.00176658 Jy ! Component: 2200 - total flux cleaned = -0.00174621 Jy ! Component: 2250 - total flux cleaned = -0.00175633 Jy ! Component: 2300 - total flux cleaned = -0.00178648 Jy ! Component: 2350 - total flux cleaned = -0.0017964 Jy ! Component: 2400 - total flux cleaned = -0.00176667 Jy ! Component: 2450 - total flux cleaned = -0.00179622 Jy ! Component: 2500 - total flux cleaned = -0.00177662 Jy ! Component: 2550 - total flux cleaned = -0.00181574 Jy ! Component: 2600 - total flux cleaned = -0.00177691 Jy ! Component: 2650 - total flux cleaned = -0.00178659 Jy ! Component: 2700 - total flux cleaned = -0.00181544 Jy ! Component: 2750 - total flux cleaned = -0.00177709 Jy ! Component: 2800 - total flux cleaned = -0.00177709 Jy ! Component: 2850 - total flux cleaned = -0.00181507 Jy ! Component: 2900 - total flux cleaned = -0.00179615 Jy ! Component: 2950 - total flux cleaned = -0.00177721 Jy ! Component: 3000 - total flux cleaned = -0.00177721 Jy ! Component: 3050 - total flux cleaned = -0.00173061 Jy ! Component: 3100 - total flux cleaned = -0.0017584 Jy ! Component: 3150 - total flux cleaned = -0.00172149 Jy ! Component: 3200 - total flux cleaned = -0.00170317 Jy ! Component: 3250 - total flux cleaned = -0.00168501 Jy ! Component: 3300 - total flux cleaned = -0.00166682 Jy ! Component: 3350 - total flux cleaned = -0.00165765 Jy ! Component: 3400 - total flux cleaned = -0.00163964 Jy ! Component: 3450 - total flux cleaned = -0.00160375 Jy ! Component: 3500 - total flux cleaned = -0.00163953 Jy ! Component: 3550 - total flux cleaned = -0.00157719 Jy ! Component: 3600 - total flux cleaned = -0.00161258 Jy ! Component: 3650 - total flux cleaned = -0.00156837 Jy ! Component: 3700 - total flux cleaned = -0.00156839 Jy ! Component: 3750 - total flux cleaned = -0.00157718 Jy ! Component: 3800 - total flux cleaned = -0.00153354 Jy ! Component: 3850 - total flux cleaned = -0.00153358 Jy ! Component: 3900 - total flux cleaned = -0.00152487 Jy ! Component: 3950 - total flux cleaned = -0.00149905 Jy ! Component: 4000 - total flux cleaned = -0.00146474 Jy ! Component: 4050 - total flux cleaned = -0.00147331 Jy ! Total flux subtracted in 4096 components = -0.00143929 Jy ! Clean residual min=-0.000445 max=0.000509 Jy/beam ! Clean residual mean=-0.000000 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.0902218 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 364 components and 0.0902219 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0534-3950_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7885 x 2.174 at -9.062 degrees (North through East) ! Clean map min=-0.00076336 max=0.067295 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0534-3950_X_a_map.fits wmodel /vlbi/uf001/uvm//J0534-3950_X_a_map.mod ! Writing 364 model components to file: /vlbi/uf001/uvm//J0534-3950_X_a_map.mod wobs /vlbi/uf001/uvm//J0534-3950_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0534-3950_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0534-3950_X_a_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uvm//J0534-3950_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0672946 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000145222 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.647401 0.647401 1.2948 2.58961 5.17921 10.3584 20.7168 41.4337 82.8674 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.067 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 463.39 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0534-3950_X_a_dfm.log closed on Sun Jan 13 20:51:03 2019