! Started logfile: /vlbi/uf001/uvm//J0533+4822_X_a_dfm.log on Sun Jan 13 20:50:31 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0533+4822_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0533+4822_X_a_uvm.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! AN table 2: 5 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.814815 visibilities/baseline/integration-bin. ! Found source: J0533+4822 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 5280 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0533+4822_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.560817Jy sigma=20.030365 ! Fit after self-cal, rms=0.344213Jy sigma=4.087321 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7518 mas, bmaj=1.117 mas, bpa=-16.57 degrees ! Estimated noise=1.13282 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.844486 Jy ! Component: 100 - total flux cleaned = 1.03242 Jy ! Total flux subtracted in 100 components = 1.03242 Jy ! Clean residual min=-0.051841 max=0.084557 Jy/beam ! Clean residual mean=-0.000101 rms=0.013335 Jy/beam ! Combined flux in latest and established models = 1.03242 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 1.03242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.333484Jy sigma=4.032246 ! Fit after self-cal, rms=0.333476Jy sigma=4.032170 ! Inverting map ! Added new window around map position (-14, 33.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.078762 Jy ! Component: 100 - total flux cleaned = 0.098332 Jy ! Total flux subtracted in 100 components = 0.098332 Jy ! Clean residual min=-0.050203 max=0.080367 Jy/beam ! Clean residual mean=-0.000097 rms=0.012332 Jy/beam ! Combined flux in latest and established models = 1.13075 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 1.13075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.304275Jy sigma=3.811783 ! Fit after self-cal, rms=0.302762Jy sigma=3.795243 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9205 mas, bmaj=1.32 mas, bpa=-16.66 degrees ! Estimated noise=0.858143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274783 Jy ! Component: 100 - total flux cleaned = 0.0392738 Jy ! Component: 150 - total flux cleaned = 0.0473228 Jy ! Component: 200 - total flux cleaned = 0.0513655 Jy ! Total flux subtracted in 200 components = 0.0513655 Jy ! Clean residual min=-0.063506 max=0.080162 Jy/beam ! Clean residual mean=-0.000138 rms=0.014834 Jy/beam ! Combined flux in latest and established models = 1.18212 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 1.18212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.289362Jy sigma=3.701626 ! Fit after self-cal, rms=0.288888Jy sigma=3.695765 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9205 x 1.32 at -16.66 degrees (North through East) ! Clean map min=-0.061367 max=1.0662 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.02 HN 0.99 KP 1.02 ! LA 1.33 MK 1.01 NL 1.12 OV 0.99 ! PT 1.00* SC 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 HN 0.85 KP 0.86 LA 0.86 ! MK 1.06 NL 0.92 OV 0.81 PT 0.76 ! SC 0.86 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 1.02 KP 1.02 ! LA 1.30 MK 0.98 NL 1.16 OV 1.01 ! PT 1.00* SC 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 HN 0.86 KP 0.85 LA 0.86 ! MK 1.07 NL 0.94 OV 0.79 PT 0.76 ! SC 0.82 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 0.99 KP 1.01 ! LA 1.32 MK 0.98 NL 1.14 OV 1.04 ! PT 1.00* SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 HN 0.86 KP 0.85 LA 0.85 ! MK 1.04 NL 0.90 OV 0.80 PT 0.77 ! SC 0.81 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.02 HN 0.99 KP 1.00 ! LA 1.26 MK 1.03 NL 1.19 OV 0.97 ! PT 1.00* SC 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 HN 0.89 KP 0.87 LA 0.85 ! MK 1.05 NL 0.94 OV 0.80 PT 0.78 ! SC 0.86 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00 HN 1.00 KP 1.03 ! LA 1.28 MK 1.02 NL 1.14 OV 1.01 ! PT 1.00* SC 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 HN 0.84 KP 0.86 LA 0.85 ! MK 1.06 NL 0.93 OV 0.84 PT 0.77 ! SC 0.83 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.99 HN 0.97 KP 1.02 ! LA 1.30 MK 1.00 NL 1.13 OV 1.02 ! PT 1.00* SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 HN 0.89 KP 0.86 LA 0.85 ! MK 1.07 NL 0.95 OV 0.83 PT 0.77 ! SC 0.83 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.98 HN 0.98 KP 1.04 ! LA 1.26 MK 1.05 NL 1.17 OV 0.96 ! PT 1.00* SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 HN 0.90 KP 0.87 LA 0.85 ! MK 1.06 NL 0.97 OV 0.82 PT 0.78 ! SC 0.86 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00 HN 0.99 KP 1.02 ! LA 1.30 MK 1.04 NL 1.15 OV 0.98 ! PT 1.00* SC 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 HN 0.86 KP 0.87 LA 0.84 ! MK 1.09 NL 0.95 OV 0.82 PT 0.77 ! SC 0.85 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.02 HN 0.99 KP 1.04 ! LA 1.28 MK 1.03 NL 1.16 OV 0.97 ! PT 1.00* SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 HN 0.89 KP 0.86 LA 0.86 ! MK 1.06 NL 1.00 OV 0.83 PT 0.80 ! SC 0.85 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.01 HN 0.99 KP 1.02 ! LA 1.37 MK 1.03 NL 1.14 OV 0.98 ! PT 1.00* SC 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 HN 0.89 KP 0.88 LA 0.83 ! MK 1.08 NL 0.96 OV 0.81 PT 0.79 ! SC 0.87 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.05 HN 0.97 KP 1.03 ! LA 1.33 MK 1.02 NL 1.12 OV 0.99 ! PT 1.00* SC 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 HN 0.86 KP 0.84 LA 0.86 ! MK 1.08 NL 1.00 OV 0.81 PT 0.77 ! SC 0.87 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.03 HN 1.00 KP 0.98 ! LA 1.29 MK 1.04 NL 1.16 OV 1.00 ! PT 1.00* SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 HN 0.85 KP 0.86 LA 0.85 ! MK 1.06 NL 0.99 OV 0.82 PT 0.79 ! SC 0.85 ! ! ! Fit before self-cal, rms=0.288888Jy sigma=3.695765 ! Fit after self-cal, rms=0.175306Jy sigma=2.095155 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8999 mas, bmaj=1.328 mas, bpa=-17.1 degrees ! Estimated noise=0.867924 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00630243 Jy ! Component: 100 - total flux cleaned = -0.00891419 Jy ! Component: 150 - total flux cleaned = -0.0113975 Jy ! Component: 200 - total flux cleaned = -0.0122978 Jy ! Total flux subtracted in 200 components = -0.0122978 Jy ! Clean residual min=-0.036846 max=0.034180 Jy/beam ! Clean residual mean=-0.000075 rms=0.007734 Jy/beam ! Combined flux in latest and established models = 1.16982 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 1.16982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165618Jy sigma=1.988311 ! Fit after self-cal, rms=0.164856Jy sigma=1.976323 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.164856Jy sigma=1.976323 ! Fit after self-cal, rms=0.084497Jy sigma=1.039914 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8994 mas, bmaj=1.316 mas, bpa=-16.63 degrees ! Estimated noise=0.86739 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0122583 Jy ! Component: 100 - total flux cleaned = -0.0138148 Jy ! Component: 150 - total flux cleaned = -0.0163442 Jy ! Component: 200 - total flux cleaned = -0.0183526 Jy ! Total flux subtracted in 200 components = -0.0183526 Jy ! Clean residual min=-0.010910 max=0.013281 Jy/beam ! Clean residual mean=-0.000005 rms=0.002361 Jy/beam ! Combined flux in latest and established models = 1.15147 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 1.15147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076852Jy sigma=0.948108 ! Fit after self-cal, rms=0.076058Jy sigma=0.935058 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00645015 Jy ! Component: 100 - total flux cleaned = 0.00517663 Jy ! Component: 150 - total flux cleaned = 0.00442519 Jy ! Component: 200 - total flux cleaned = 0.00375132 Jy ! Total flux subtracted in 200 components = 0.00375132 Jy ! Clean residual min=-0.009233 max=0.009157 Jy/beam ! Clean residual mean=-0.000007 rms=0.002057 Jy/beam ! Combined flux in latest and established models = 1.15522 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 48 components and 1.15522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073027Jy sigma=0.898610 ! Fit after self-cal, rms=0.072755Jy sigma=0.893913 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072755Jy sigma=0.893913 ! Fit after self-cal, rms=0.070107Jy sigma=0.863483 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8954 mas, bmaj=1.32 mas, bpa=-17.05 degrees ! Estimated noise=0.866455 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00472685 Jy ! Component: 100 - total flux cleaned = -0.00510412 Jy ! Component: 150 - total flux cleaned = -0.00457961 Jy ! Component: 200 - total flux cleaned = -0.00369895 Jy ! Total flux subtracted in 200 components = -0.00369895 Jy ! Clean residual min=-0.007873 max=0.008141 Jy/beam ! Clean residual mean=-0.000004 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 1.15152 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 57 components and 1.15152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067526Jy sigma=0.829819 ! Fit after self-cal, rms=0.067394Jy sigma=0.827763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00528676 Jy ! Component: 100 - total flux cleaned = 0.00665764 Jy ! Component: 150 - total flux cleaned = 0.00829178 Jy ! Component: 200 - total flux cleaned = 0.0090361 Jy ! Total flux subtracted in 200 components = 0.0090361 Jy ! Clean residual min=-0.007367 max=0.007067 Jy/beam ! Clean residual mean=-0.000005 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 1.16056 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 71 components and 1.16056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065901Jy sigma=0.806883 ! Fit after self-cal, rms=0.065833Jy sigma=0.806168 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065833Jy sigma=0.806168 ! Fit after self-cal, rms=0.064869Jy sigma=0.796062 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.988 mas, bmaj=2.255 mas, bpa=-14.27 degrees ! Estimated noise=1.17995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212565 Jy ! Component: 100 - total flux cleaned = 0.00449381 Jy ! Component: 150 - total flux cleaned = 0.0052815 Jy ! Component: 200 - total flux cleaned = 0.00553948 Jy ! Total flux subtracted in 200 components = 0.00553948 Jy ! Clean residual min=-0.005902 max=0.005760 Jy/beam ! Clean residual mean=-0.000011 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 1.1661 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 84 components and 1.1661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064126Jy sigma=0.786991 ! Fit after self-cal, rms=0.064061Jy sigma=0.785826 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000908767 Jy ! Component: 100 - total flux cleaned = -0.00101 Jy ! Component: 150 - total flux cleaned = -0.00110381 Jy ! Component: 200 - total flux cleaned = -0.00118522 Jy ! Total flux subtracted in 200 components = -0.00118522 Jy ! Clean residual min=-0.005606 max=0.005946 Jy/beam ! Clean residual mean=-0.000011 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 1.16491 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 1.16491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063837Jy sigma=0.783235 ! Fit after self-cal, rms=0.063820Jy sigma=0.782952 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8929 mas, bmaj=1.323 mas, bpa=-17.31 degrees ! Estimated noise=0.865309 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8929 x 1.323 at -17.31 degrees (North through East) ! Clean map min=-0.0064375 max=1.0606 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063820Jy sigma=0.782952 ! Fit after self-cal, rms=0.060128Jy sigma=0.734266 ! Inverting map and beam ! Estimated beam: bmin=0.8926 mas, bmaj=1.325 mas, bpa=-17.41 degrees ! Estimated noise=0.865253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00261975 Jy ! Component: 100 - total flux cleaned = -0.00188265 Jy ! Component: 150 - total flux cleaned = -0.00122133 Jy ! Component: 200 - total flux cleaned = -0.000918023 Jy ! Total flux subtracted in 200 components = -0.000918023 Jy ! Clean residual min=-0.005749 max=0.006005 Jy/beam ! Clean residual mean=-0.000004 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 1.16399 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 1.16399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059142Jy sigma=0.719763 ! Fit after self-cal, rms=0.059115Jy sigma=0.719427 ! Inverting map ! Added new window around map position (-7.6, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000998577 Jy ! Component: 100 - total flux cleaned = 0.000861451 Jy ! Component: 150 - total flux cleaned = 0.00113714 Jy ! Component: 200 - total flux cleaned = 0.00113599 Jy ! Total flux subtracted in 200 components = 0.00113599 Jy ! Clean residual min=-0.005038 max=0.005291 Jy/beam ! Clean residual mean=-0.000004 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 1.16513 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 120 components and 1.16513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058312Jy sigma=0.707350 ! Fit after self-cal, rms=0.058287Jy sigma=0.706932 ! Inverting map ! Added new window around map position (-1.2, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189199 Jy ! Component: 100 - total flux cleaned = 0.00217192 Jy ! Component: 150 - total flux cleaned = 0.00230048 Jy ! Component: 200 - total flux cleaned = 0.00229894 Jy ! Total flux subtracted in 200 components = 0.00229894 Jy ! Clean residual min=-0.004935 max=0.004892 Jy/beam ! Clean residual mean=-0.000004 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 1.16743 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 135 components and 1.16743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057650Jy sigma=0.697344 ! Fit after self-cal, rms=0.057643Jy sigma=0.697044 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057643Jy sigma=0.697044 ! Fit after self-cal, rms=0.057274Jy sigma=0.693215 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7349 mas, bmaj=1.128 mas, bpa=-16.8 degrees ! Estimated noise=1.1204 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.832923 Jy ! Component: 100 - total flux cleaned = 1.01528 Jy ! Component: 150 - total flux cleaned = 1.0675 Jy ! Component: 200 - total flux cleaned = 1.08553 Jy ! Total flux subtracted in 200 components = 1.08553 Jy ! Clean residual min=-0.012562 max=0.012615 Jy/beam ! Clean residual mean=-0.000001 rms=0.002007 Jy/beam ! Combined flux in latest and established models = 1.08553 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.08553 Jy ! Inverting map and beam ! Estimated beam: bmin=0.891 mas, bmaj=1.326 mas, bpa=-17.53 degrees ! Estimated noise=0.864707 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196769 Jy ! Component: 100 - total flux cleaned = 0.0327686 Jy ! Component: 150 - total flux cleaned = 0.0405568 Jy ! Component: 200 - total flux cleaned = 0.0467607 Jy ! Total flux subtracted in 200 components = 0.0467607 Jy ! Clean residual min=-0.005519 max=0.007877 Jy/beam ! Clean residual mean=-0.000002 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 1.13229 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 39 components and 1.13229 Jy ! Inverting map ! Added new window around map position (7, -10.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632492 Jy ! Component: 100 - total flux cleaned = 0.0111574 Jy ! Component: 150 - total flux cleaned = 0.0152737 Jy ! Component: 200 - total flux cleaned = 0.0181182 Jy ! Total flux subtracted in 200 components = 0.0181182 Jy ! Clean residual min=-0.004545 max=0.005380 Jy/beam ! Clean residual mean=-0.000003 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 1.15041 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 52 components and 1.15041 Jy ! Inverting map ! Added new window around map position (-4.8, 10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352187 Jy ! Component: 100 - total flux cleaned = 0.00582488 Jy ! Component: 150 - total flux cleaned = 0.00706619 Jy ! Component: 200 - total flux cleaned = 0.00839117 Jy ! Total flux subtracted in 200 components = 0.00839117 Jy ! Clean residual min=-0.004124 max=0.004436 Jy/beam ! Clean residual mean=-0.000003 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 1.1588 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 71 components and 1.1588 Jy ! Inverting map ! Added new window around map position (-10.8, 17.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313293 Jy ! Component: 100 - total flux cleaned = 0.00460318 Jy ! Component: 150 - total flux cleaned = 0.00556434 Jy ! Component: 200 - total flux cleaned = 0.00609021 Jy ! Total flux subtracted in 200 components = 0.00609021 Jy ! Clean residual min=-0.003869 max=0.004046 Jy/beam ! Clean residual mean=-0.000003 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 1.16489 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 88 components and 1.16489 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.985 mas, bmaj=2.255 mas, bpa=-14.7 degrees ! Estimated noise=1.18042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434194 Jy ! Component: 100 - total flux cleaned = 0.00610067 Jy ! Component: 150 - total flux cleaned = 0.00750175 Jy ! Component: 200 - total flux cleaned = 0.00827543 Jy ! Total flux subtracted in 200 components = 0.00827543 Jy ! Clean residual min=-0.004878 max=0.004073 Jy/beam ! Clean residual mean=-0.000010 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 1.17317 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000541367 Jy ! Component: 100 - total flux cleaned = 0.000755068 Jy ! Component: 150 - total flux cleaned = 0.000954673 Jy ! Component: 200 - total flux cleaned = 0.00113823 Jy ! Total flux subtracted in 200 components = 0.00113823 Jy ! Clean residual min=-0.004774 max=0.003940 Jy/beam ! Clean residual mean=-0.000010 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 1.17431 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 137 components and 1.17431 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.891 mas, bmaj=1.326 mas, bpa=-17.53 degrees ! Estimated noise=0.864707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.41725e-05 Jy ! Component: 100 - total flux cleaned = 9.34483e-05 Jy ! Component: 150 - total flux cleaned = -0.000113582 Jy ! Component: 200 - total flux cleaned = -0.000211089 Jy ! Total flux subtracted in 200 components = -0.000211089 Jy ! Clean residual min=-0.003493 max=0.004086 Jy/beam ! Clean residual mean=-0.000004 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 1.1741 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 156 components and 1.1741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055558Jy sigma=0.669568 ! Fit after self-cal, rms=0.055333Jy sigma=0.666529 wmodel J0533+4822_X_a_map.mod ! Writing 156 model components to file: J0533+4822_X_a_map.mod wobs J0533+4822_X_a_uvs.fits ! Writing UV FITS file: J0533+4822_X_a_uvs.fits wwins J0533+4822_X_a_map.win ! wwins: Wrote 9 windows to J0533+4822_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157236 Jy ! Component: 100 - total flux cleaned = 0.00221741 Jy ! Component: 150 - total flux cleaned = 0.00276286 Jy ! Component: 200 - total flux cleaned = 0.00305348 Jy ! Component: 250 - total flux cleaned = 0.00333595 Jy ! Component: 300 - total flux cleaned = 0.00377263 Jy ! Component: 350 - total flux cleaned = 0.00403884 Jy ! Component: 400 - total flux cleaned = 0.00419551 Jy ! Component: 450 - total flux cleaned = 0.00449999 Jy ! Component: 500 - total flux cleaned = 0.00479768 Jy ! Component: 550 - total flux cleaned = 0.00509038 Jy ! Component: 600 - total flux cleaned = 0.00523509 Jy ! Component: 650 - total flux cleaned = 0.00565959 Jy ! Component: 700 - total flux cleaned = 0.00570514 Jy ! Component: 750 - total flux cleaned = 0.00588771 Jy ! Component: 800 - total flux cleaned = 0.00593287 Jy ! Component: 850 - total flux cleaned = 0.00615448 Jy ! Component: 900 - total flux cleaned = 0.00632927 Jy ! Component: 950 - total flux cleaned = 0.00650002 Jy ! Component: 1000 - total flux cleaned = 0.00679506 Jy ! Component: 1050 - total flux cleaned = 0.00700313 Jy ! Component: 1100 - total flux cleaned = 0.00708518 Jy ! Component: 1150 - total flux cleaned = 0.00716714 Jy ! Component: 1200 - total flux cleaned = 0.00732782 Jy ! Component: 1250 - total flux cleaned = 0.00768453 Jy ! Component: 1300 - total flux cleaned = 0.00776182 Jy ! Component: 1350 - total flux cleaned = 0.00795521 Jy ! Component: 1400 - total flux cleaned = 0.00806911 Jy ! Component: 1450 - total flux cleaned = 0.00810683 Jy ! Component: 1500 - total flux cleaned = 0.00829217 Jy ! Component: 1550 - total flux cleaned = 0.00829222 Jy ! Component: 1600 - total flux cleaned = 0.00843767 Jy ! Component: 1650 - total flux cleaned = 0.00854575 Jy ! Component: 1700 - total flux cleaned = 0.00861662 Jy ! Component: 1750 - total flux cleaned = 0.0087573 Jy ! Component: 1800 - total flux cleaned = 0.00875714 Jy ! Component: 1850 - total flux cleaned = 0.00882616 Jy ! Component: 1900 - total flux cleaned = 0.0089287 Jy ! Component: 1950 - total flux cleaned = 0.00906317 Jy ! Component: 2000 - total flux cleaned = 0.00909593 Jy ! Component: 2050 - total flux cleaned = 0.00899682 Jy ! Component: 2100 - total flux cleaned = 0.00919302 Jy ! Component: 2150 - total flux cleaned = 0.00922526 Jy ! Component: 2200 - total flux cleaned = 0.00932145 Jy ! Component: 2250 - total flux cleaned = 0.00938462 Jy ! Component: 2300 - total flux cleaned = 0.00941582 Jy ! Component: 2350 - total flux cleaned = 0.00947853 Jy ! Component: 2400 - total flux cleaned = 0.00960178 Jy ! Component: 2450 - total flux cleaned = 0.00987664 Jy ! Component: 2500 - total flux cleaned = 0.00996662 Jy ! Component: 2550 - total flux cleaned = 0.00993637 Jy ! Component: 2600 - total flux cleaned = 0.0100252 Jy ! Component: 2650 - total flux cleaned = 0.0100841 Jy ! Component: 2700 - total flux cleaned = 0.0102303 Jy ! Component: 2750 - total flux cleaned = 0.0102302 Jy ! Component: 2800 - total flux cleaned = 0.0103158 Jy ! Component: 2850 - total flux cleaned = 0.0104011 Jy ! Component: 2900 - total flux cleaned = 0.0104011 Jy ! Component: 2950 - total flux cleaned = 0.0104288 Jy ! Component: 3000 - total flux cleaned = 0.0105121 Jy ! Component: 3050 - total flux cleaned = 0.0106218 Jy ! Component: 3100 - total flux cleaned = 0.0106217 Jy ! Component: 3150 - total flux cleaned = 0.0107297 Jy ! Component: 3200 - total flux cleaned = 0.0108633 Jy ! Component: 3250 - total flux cleaned = 0.0109164 Jy ! Component: 3300 - total flux cleaned = 0.0110221 Jy ! Component: 3350 - total flux cleaned = 0.0111788 Jy ! Component: 3400 - total flux cleaned = 0.0111523 Jy ! Component: 3450 - total flux cleaned = 0.0111522 Jy ! Component: 3500 - total flux cleaned = 0.0113565 Jy ! Component: 3550 - total flux cleaned = 0.0114323 Jy ! Component: 3600 - total flux cleaned = 0.0114576 Jy ! Component: 3650 - total flux cleaned = 0.0115328 Jy ! Component: 3700 - total flux cleaned = 0.0114337 Jy ! Component: 3750 - total flux cleaned = 0.0115566 Jy ! Component: 3800 - total flux cleaned = 0.011581 Jy ! Component: 3850 - total flux cleaned = 0.0116052 Jy ! Component: 3900 - total flux cleaned = 0.0117497 Jy ! Component: 3950 - total flux cleaned = 0.0117977 Jy ! Component: 4000 - total flux cleaned = 0.0117978 Jy ! Component: 4050 - total flux cleaned = 0.0119156 Jy ! Total flux subtracted in 4096 components = 0.0119622 Jy ! Clean residual min=-0.001211 max=0.001465 Jy/beam ! Clean residual mean=-0.000002 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 1.18606 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 486 components and 1.18606 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0533+4822_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.891 x 1.326 at -17.53 degrees (North through East) ! Clean map min=-0.0025441 max=1.0679 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0533+4822_X_a_map.fits wmodel /vlbi/uf001/uvm//J0533+4822_X_a_map.mod ! Writing 486 model components to file: /vlbi/uf001/uvm//J0533+4822_X_a_map.mod wobs /vlbi/uf001/uvm//J0533+4822_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0533+4822_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0533+4822_X_a_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uvm//J0533+4822_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.06785 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000403691 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.113412 0.113412 0.226824 0.453649 0.907298 1.8146 3.62919 7.25838 14.5168 29.0335 58.0671 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.067 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2645.22 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0533+4822_X_a_dfm.log closed on Sun Jan 13 20:50:36 2019