! Started logfile: /vlbi/uf001/uva//J0529-2515_X_dfm.log on Sun Jan 13 22:37:28 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0529-2515_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0529-2515_X_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.983626 visibilities/baseline/integration-bin.
! Found source: J0529-2515
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20184 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0529-2515_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011391Jy  sigma=20.956053
! Fit after  self-cal, rms=0.883347Jy  sigma=18.178820
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6171 mas, bmaj=1.606 mas, bpa=-4.763 degrees
! Estimated noise=0.505148 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0927103 Jy
! Component: 100  -  total flux cleaned = 0.112997 Jy
! Total flux subtracted in 100 components = 0.112997 Jy
! Clean residual min=-0.005376 max=0.008222 Jy/beam
! Clean residual mean=0.000003 rms=0.001163 Jy/beam
! Combined flux in latest and established models = 0.112997 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.112997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071975Jy  sigma=1.326489
! Fit after  self-cal, rms=0.071924Jy  sigma=1.326007
! Inverting map 
! Added new window around map position (1, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00788879 Jy
! Component: 100  -  total flux cleaned = 0.0103567 Jy
! Total flux subtracted in 100 components = 0.0103567 Jy
! Clean residual min=-0.004219 max=0.007222 Jy/beam
! Clean residual mean=0.000004 rms=0.001009 Jy/beam
! Combined flux in latest and established models = 0.123353 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 8 components and 0.123353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071189Jy  sigma=1.302540
! Fit after  self-cal, rms=0.071159Jy  sigma=1.300817
! Inverting map 
! Added new window around map position (2, 3.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00565954 Jy
! Component: 100  -  total flux cleaned = 0.00765835 Jy
! Total flux subtracted in 100 components = 0.00765835 Jy
! Clean residual min=-0.003787 max=0.005713 Jy/beam
! Clean residual mean=0.000004 rms=0.000933 Jy/beam
! Combined flux in latest and established models = 0.131012 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 21 components and 0.131012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070833Jy  sigma=1.293151
! Fit after  self-cal, rms=0.070792Jy  sigma=1.291242
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8214 mas, bmaj=2.027 mas, bpa=-5.221 degrees
! Estimated noise=0.258984 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00536977 Jy
! Component: 100  -  total flux cleaned = 0.00820434 Jy
! Component: 150  -  total flux cleaned = 0.0092104 Jy
! Component: 200  -  total flux cleaned = 0.00982784 Jy
! Total flux subtracted in 200 components = 0.00982784 Jy
! Clean residual min=-0.003221 max=0.004039 Jy/beam
! Clean residual mean=0.000006 rms=0.000780 Jy/beam
! Combined flux in latest and established models = 0.14084 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 45 components and 0.14084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070360Jy  sigma=1.280948
! Fit after  self-cal, rms=0.070326Jy  sigma=1.279989
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8214 x 2.027 at -5.221 degrees (North through East)
! Clean map  min=-0.0032122  max=0.11582 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        1.12     KP        0.99     
!   LA        1.01     MK        0.96     NL        1.07     OV        0.88     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.00     HN        1.12     KP        1.01     
!   LA        1.00     MK        1.00     NL        1.09     OV        0.89     
!   PT        0.96     SC        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.11     KP        0.98     
!   LA        1.00     MK        0.96     NL        1.12     OV        0.90     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        1.07     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.11     OV        0.92     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        1.10     KP        1.02     
!   LA        1.03     MK        0.99     NL        1.07     OV        0.90     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        1.07     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.07     OV        0.90     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        1.11     KP        0.98     
!   LA        0.99     MK        0.98     NL        1.10     OV        0.90     
!   PT        0.96     SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.12     KP        1.02     
!   LA        1.00     MK        1.01     NL        1.07     OV        0.91     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        1.10     KP        0.99     
!   LA        1.00     MK        0.99     NL        1.13     OV        0.88     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        1.11     KP        1.04     
!   LA        0.99     MK        1.03     NL        1.11     OV        0.90     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.99     HN        1.03     KP        1.05     
!   LA        0.99     MK        0.97     NL        1.13     OV        0.90     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        1.13     KP        0.99     
!   LA        1.00     MK        1.04     NL        1.10     OV        0.90     
!   PT        0.96     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.070326Jy  sigma=1.279989
! Fit after  self-cal, rms=0.072955Jy  sigma=1.263234
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8202 mas, bmaj=2.02 mas, bpa=-4.743 degrees
! Estimated noise=0.260179 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00222758 Jy
! Component: 100  -  total flux cleaned = -0.00354679 Jy
! Component: 150  -  total flux cleaned = -0.00397463 Jy
! Component: 200  -  total flux cleaned = -0.00422406 Jy
! Total flux subtracted in 200 components = -0.00422406 Jy
! Clean residual min=-0.002144 max=0.002010 Jy/beam
! Clean residual mean=0.000000 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.136616 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 66 components and 0.136616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072851Jy  sigma=1.261262
! Fit after  self-cal, rms=0.072934Jy  sigma=1.260939
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072934Jy  sigma=1.260939
! Fit after  self-cal, rms=0.074205Jy  sigma=1.255737
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8225 mas, bmaj=2.029 mas, bpa=-4.814 degrees
! Estimated noise=0.260329 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00163045 Jy
! Component: 100  -  total flux cleaned = -0.00220899 Jy
! Component: 150  -  total flux cleaned = -0.00250973 Jy
! Component: 200  -  total flux cleaned = -0.00268154 Jy
! Total flux subtracted in 200 components = -0.00268154 Jy
! Clean residual min=-0.001646 max=0.001439 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.133934 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 79 components and 0.133934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074152Jy  sigma=1.254715
! Fit after  self-cal, rms=0.074164Jy  sigma=1.254569
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000294408 Jy
! Component: 100  -  total flux cleaned = -0.000293506 Jy
! Component: 150  -  total flux cleaned = -0.000293591 Jy
! Component: 200  -  total flux cleaned = -0.000315258 Jy
! Total flux subtracted in 200 components = -0.000315258 Jy
! Clean residual min=-0.001611 max=0.001435 Jy/beam
! Clean residual mean=-0.000001 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.133619 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 91 components and 0.133619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074144Jy  sigma=1.254242
! Fit after  self-cal, rms=0.074139Jy  sigma=1.254199
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074139Jy  sigma=1.254199
! Fit after  self-cal, rms=0.074655Jy  sigma=1.253973
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8226 mas, bmaj=2.028 mas, bpa=-4.819 degrees
! Estimated noise=0.259948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00102424 Jy
! Component: 100  -  total flux cleaned = -0.00129696 Jy
! Component: 150  -  total flux cleaned = -0.00147649 Jy
! Component: 200  -  total flux cleaned = -0.00151593 Jy
! Total flux subtracted in 200 components = -0.00151593 Jy
! Clean residual min=-0.001497 max=0.001383 Jy/beam
! Clean residual mean=-0.000001 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.132103 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 95 components and 0.132103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074632Jy  sigma=1.253578
! Fit after  self-cal, rms=0.074634Jy  sigma=1.253541
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000137461 Jy
! Component: 100  -  total flux cleaned = -0.000137443 Jy
! Component: 150  -  total flux cleaned = -0.000153569 Jy
! Component: 200  -  total flux cleaned = -0.000199884 Jy
! Total flux subtracted in 200 components = -0.000199884 Jy
! Clean residual min=-0.001493 max=0.001376 Jy/beam
! Clean residual mean=-0.000001 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.131903 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 101 components and 0.131903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074624Jy  sigma=1.253385
! Fit after  self-cal, rms=0.074620Jy  sigma=1.253366
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074620Jy  sigma=1.253366
! Fit after  self-cal, rms=0.075059Jy  sigma=1.253241
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.266 mas, bmaj=5.184 mas, bpa=0.1561 degrees
! Estimated noise=0.326254 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0008107 Jy
! Component: 100  -  total flux cleaned = -0.00117365 Jy
! Component: 150  -  total flux cleaned = -0.00129233 Jy
! Component: 200  -  total flux cleaned = -0.00138374 Jy
! Total flux subtracted in 200 components = -0.00138374 Jy
! Clean residual min=-0.001600 max=0.001200 Jy/beam
! Clean residual mean=-0.000001 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.130519 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 108 components and 0.130519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075052Jy  sigma=1.253109
! Fit after  self-cal, rms=0.075055Jy  sigma=1.253082
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000132547 Jy
! Component: 100  -  total flux cleaned = -0.000180582 Jy
! Component: 150  -  total flux cleaned = -0.000169553 Jy
! Component: 200  -  total flux cleaned = -0.000169371 Jy
! Total flux subtracted in 200 components = -0.000169371 Jy
! Clean residual min=-0.001564 max=0.001171 Jy/beam
! Clean residual mean=-0.000001 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.13035 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 112 components and 0.13035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075052Jy  sigma=1.253052
! Fit after  self-cal, rms=0.075050Jy  sigma=1.253037
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8225 mas, bmaj=2.026 mas, bpa=-4.823 degrees
! Estimated noise=0.259616 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8225 x 2.026 at -4.823 degrees (North through East)
! Clean map  min=-0.0014309  max=0.11773 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6151 mas, bmaj=1.602 mas, bpa=-4.326 degrees
! Estimated noise=0.510125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0935285 Jy
! Component: 100  -  total flux cleaned = 0.113986 Jy
! Component: 150  -  total flux cleaned = 0.12093 Jy
! Component: 200  -  total flux cleaned = 0.125178 Jy
! Total flux subtracted in 200 components = 0.125178 Jy
! Clean residual min=-0.003233 max=0.002896 Jy/beam
! Clean residual mean=0.000000 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.125178 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.125178 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8225 mas, bmaj=2.026 mas, bpa=-4.823 degrees
! Estimated noise=0.259616 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00314168 Jy
! Component: 100  -  total flux cleaned = 0.00438282 Jy
! Component: 150  -  total flux cleaned = 0.00466716 Jy
! Component: 200  -  total flux cleaned = 0.00473863 Jy
! Total flux subtracted in 200 components = 0.00473863 Jy
! Clean residual min=-0.001438 max=0.001327 Jy/beam
! Clean residual mean=-0.000001 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.129917 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 30 components and 0.129917 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.266 mas, bmaj=5.184 mas, bpa=0.1561 degrees
! Estimated noise=0.326254 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000488269 Jy
! Component: 100  -  total flux cleaned = 0.000589263 Jy
! Component: 150  -  total flux cleaned = 0.0006035 Jy
! Component: 200  -  total flux cleaned = 0.000630026 Jy
! Total flux subtracted in 200 components = 0.000630026 Jy
! Clean residual min=-0.001646 max=0.001192 Jy/beam
! Clean residual mean=-0.000001 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.130547 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.1904e-05 Jy
! Component: 100  -  total flux cleaned = -1.19383e-05 Jy
! Component: 150  -  total flux cleaned = -2.34629e-05 Jy
! Component: 200  -  total flux cleaned = -4.5162e-05 Jy
! Total flux subtracted in 200 components = -4.5162e-05 Jy
! Clean residual min=-0.001611 max=0.001168 Jy/beam
! Clean residual mean=-0.000001 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.130502 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 44 components and 0.130502 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8225 mas, bmaj=2.026 mas, bpa=-4.823 degrees
! Estimated noise=0.259616 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000419605 Jy
! Component: 100  -  total flux cleaned = -0.000389742 Jy
! Component: 150  -  total flux cleaned = -0.000361848 Jy
! Component: 200  -  total flux cleaned = -0.000315134 Jy
! Total flux subtracted in 200 components = -0.000315134 Jy
! Clean residual min=-0.001414 max=0.001350 Jy/beam
! Clean residual mean=-0.000001 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.130187 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 52 components and 0.130187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075058Jy  sigma=1.253277
! Fit after  self-cal, rms=0.075049Jy  sigma=1.253208
wmodel J0529-2515_X_map.mod
! Writing 52 model components to file: J0529-2515_X_map.mod
wobs   J0529-2515_X_uvs.fits
! Writing UV FITS file: J0529-2515_X_uvs.fits
wwins  J0529-2515_X_map.win
! wwins: Wrote 4 windows to J0529-2515_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00014983 Jy
! Component: 100  -  total flux cleaned = -0.000338516 Jy
! Component: 150  -  total flux cleaned = -0.000497143 Jy
! Component: 200  -  total flux cleaned = -0.00067225 Jy
! Component: 250  -  total flux cleaned = -0.000756747 Jy
! Component: 300  -  total flux cleaned = -0.000839056 Jy
! Component: 350  -  total flux cleaned = -0.000859097 Jy
! Component: 400  -  total flux cleaned = -0.000878869 Jy
! Component: 450  -  total flux cleaned = -0.000975865 Jy
! Component: 500  -  total flux cleaned = -0.00103209 Jy
! Component: 550  -  total flux cleaned = -0.00105062 Jy
! Component: 600  -  total flux cleaned = -0.00114264 Jy
! Component: 650  -  total flux cleaned = -0.00125051 Jy
! Component: 700  -  total flux cleaned = -0.00128607 Jy
! Component: 750  -  total flux cleaned = -0.00140816 Jy
! Component: 800  -  total flux cleaned = -0.00151081 Jy
! Component: 850  -  total flux cleaned = -0.00159536 Jy
! Component: 900  -  total flux cleaned = -0.00172911 Jy
! Component: 950  -  total flux cleaned = -0.00182794 Jy
! Component: 1000  -  total flux cleaned = -0.00197462 Jy
! Component: 1050  -  total flux cleaned = -0.00211921 Jy
! Component: 1100  -  total flux cleaned = -0.00215111 Jy
! Component: 1150  -  total flux cleaned = -0.00229247 Jy
! Component: 1200  -  total flux cleaned = -0.00235474 Jy
! Component: 1250  -  total flux cleaned = -0.002447 Jy
! Component: 1300  -  total flux cleaned = -0.00252317 Jy
! Component: 1350  -  total flux cleaned = -0.00261337 Jy
! Component: 1400  -  total flux cleaned = -0.00268777 Jy
! Component: 1450  -  total flux cleaned = -0.00277622 Jy
! Component: 1500  -  total flux cleaned = -0.00287839 Jy
! Component: 1550  -  total flux cleaned = -0.00293637 Jy
! Component: 1600  -  total flux cleaned = -0.00305091 Jy
! Component: 1650  -  total flux cleaned = -0.00312151 Jy
! Component: 1700  -  total flux cleaned = -0.00317739 Jy
! Component: 1750  -  total flux cleaned = -0.0032886 Jy
! Component: 1800  -  total flux cleaned = -0.00332982 Jy
! Component: 1850  -  total flux cleaned = -0.00341179 Jy
! Component: 1900  -  total flux cleaned = -0.00353358 Jy
! Component: 1950  -  total flux cleaned = -0.00361413 Jy
! Component: 2000  -  total flux cleaned = -0.00365391 Jy
! Component: 2050  -  total flux cleaned = -0.00374621 Jy
! Component: 2100  -  total flux cleaned = -0.00373294 Jy
! Component: 2150  -  total flux cleaned = -0.00384959 Jy
! Component: 2200  -  total flux cleaned = -0.00388795 Jy
! Component: 2250  -  total flux cleaned = -0.00391355 Jy
! Component: 2300  -  total flux cleaned = -0.00398955 Jy
! Component: 2350  -  total flux cleaned = -0.00405244 Jy
! Component: 2400  -  total flux cleaned = -0.00410246 Jy
! Component: 2450  -  total flux cleaned = -0.00412721 Jy
! Component: 2500  -  total flux cleaned = -0.00420085 Jy
! Component: 2550  -  total flux cleaned = -0.00427422 Jy
! Component: 2600  -  total flux cleaned = -0.00433485 Jy
! Component: 2650  -  total flux cleaned = -0.00443105 Jy
! Component: 2700  -  total flux cleaned = -0.00447888 Jy
! Component: 2750  -  total flux cleaned = -0.00449065 Jy
! Component: 2800  -  total flux cleaned = -0.00453797 Jy
! Component: 2850  -  total flux cleaned = -0.00460833 Jy
! Component: 2900  -  total flux cleaned = -0.00464321 Jy
! Component: 2950  -  total flux cleaned = -0.00466644 Jy
! Component: 3000  -  total flux cleaned = -0.00475857 Jy
! Component: 3050  -  total flux cleaned = -0.0048384 Jy
! Component: 3100  -  total flux cleaned = -0.00490651 Jy
! Component: 3150  -  total flux cleaned = -0.00490657 Jy
! Component: 3200  -  total flux cleaned = -0.00495152 Jy
! Component: 3250  -  total flux cleaned = -0.00502948 Jy
! Component: 3300  -  total flux cleaned = -0.00511812 Jy
! Component: 3350  -  total flux cleaned = -0.00518414 Jy
! Component: 3400  -  total flux cleaned = -0.00524988 Jy
! Component: 3450  -  total flux cleaned = -0.0053151 Jy
! Component: 3500  -  total flux cleaned = -0.00531508 Jy
! Component: 3550  -  total flux cleaned = -0.0053796 Jy
! Component: 3600  -  total flux cleaned = -0.00543309 Jy
! Component: 3650  -  total flux cleaned = -0.00548635 Jy
! Component: 3700  -  total flux cleaned = -0.00554976 Jy
! Component: 3750  -  total flux cleaned = -0.00560241 Jy
! Component: 3800  -  total flux cleaned = -0.00565485 Jy
! Component: 3850  -  total flux cleaned = -0.00572797 Jy
! Component: 3900  -  total flux cleaned = -0.00580058 Jy
! Component: 3950  -  total flux cleaned = -0.00583151 Jy
! Component: 4000  -  total flux cleaned = -0.00590335 Jy
! Component: 4050  -  total flux cleaned = -0.0059442 Jy
! Total flux subtracted in 4096 components = -0.0060458 Jy
! Clean residual min=-0.000867 max=0.000665 Jy/beam
! Clean residual mean=-0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.124141 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 358 components and 0.124141 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0529-2515_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8225 x 2.026 at -4.823 degrees (North through East)
! Clean map  min=-0.0013225  max=0.1185 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0529-2515_X_map.fits
wmodel /vlbi/uf001/uva//J0529-2515_X_map.mod
! Writing 358 model components to file: /vlbi/uf001/uva//J0529-2515_X_map.mod
wobs   /vlbi/uf001/uva//J0529-2515_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0529-2515_X_uvs.fits
wwins  /vlbi/uf001/uva//J0529-2515_X_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0529-2515_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.118496 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00017502 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.443103 0.443103 0.886206 1.77241 3.54483 7.08965 14.1793 28.3586 56.7172
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.118 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  677.043 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0529-2515_X_dfm.log closed on Sun Jan 13 22:37:33 2019