! Started logfile: /vlbi/uf001/uva//J0527-1002_X_dfm.log on Sun Jan 13 22:36:54 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0527-1002_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0527-1002_X_uva.fits
! AN table 1: 82 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.713821 visibilities/baseline/integration-bin.
! Found source: J0527-1002
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 31608 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0527-1002_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 240 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 240 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 240 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 240 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 240 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 240 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 240 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 240 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 240 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 240 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 240 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 240 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002849Jy  sigma=23.197078
! Fit after  self-cal, rms=0.970370Jy  sigma=22.462174
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6277 mas, bmaj=1.656 mas, bpa=-2.051 degrees
! Estimated noise=0.325378 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0246385 Jy
! Component: 100  -  total flux cleaned = 0.0300372 Jy
! Total flux subtracted in 100 components = 0.0300372 Jy
! Clean residual min=-0.001983 max=0.002717 Jy/beam
! Clean residual mean=0.000002 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.0300372 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.0300372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058962Jy  sigma=1.277932
! Fit after  self-cal, rms=0.056762Jy  sigma=1.225185
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00415312 Jy
! Component: 100  -  total flux cleaned = 0.00452652 Jy
! Total flux subtracted in 100 components = 0.00452652 Jy
! Clean residual min=-0.001954 max=0.002253 Jy/beam
! Clean residual mean=0.000002 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.0345637 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0345637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056480Jy  sigma=1.219226
! Fit after  self-cal, rms=0.056473Jy  sigma=1.219131
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8235 mas, bmaj=2.024 mas, bpa=-2.199 degrees
! Estimated noise=0.178959 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00224913 Jy
! Component: 100  -  total flux cleaned = 0.00295548 Jy
! Component: 150  -  total flux cleaned = 0.00322783 Jy
! Component: 200  -  total flux cleaned = 0.00331527 Jy
! Total flux subtracted in 200 components = 0.00331527 Jy
! Clean residual min=-0.001111 max=0.001880 Jy/beam
! Clean residual mean=0.000001 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.037879 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 26 components and 0.037879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056386Jy  sigma=1.216782
! Fit after  self-cal, rms=0.056337Jy  sigma=1.215901
! Inverting map 
! Added new window around map position (-1.6, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159057 Jy
! Component: 100  -  total flux cleaned = 0.00245813 Jy
! Component: 150  -  total flux cleaned = 0.00261884 Jy
! Component: 200  -  total flux cleaned = 0.00273037 Jy
! Total flux subtracted in 200 components = 0.00273037 Jy
! Clean residual min=-0.000980 max=0.001197 Jy/beam
! Clean residual mean=0.000001 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.0406093 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 40 components and 0.0406093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056280Jy  sigma=1.214520
! Fit after  self-cal, rms=0.056256Jy  sigma=1.214162
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8235 x 2.024 at -2.199 degrees (North through East)
! Clean map  min=-0.00092574  max=0.034741 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.03     HN        0.92     KP        1.01     
!   LA        0.98     MK        1.00     NL        1.07     OV        1.02     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.09     HN        1.00     KP        0.96     
!   LA        0.94     MK        1.07     NL        1.23     OV        0.95     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.01     HN        0.95     KP        1.05     
!   LA        0.89     MK        1.04     NL        1.13     OV        1.03     
!   PT        1.04     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.94     HN        0.90     KP        0.98     
!   LA        0.99     MK        1.09     NL        1.19     OV        1.02     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.10     HN        0.97     KP        0.99     
!   LA        0.97     MK        0.98     NL        1.24     OV        0.92     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.98     HN        0.93     KP        1.12     
!   LA        1.08     MK        1.06     NL        1.10     OV        0.90     
!   PT        1.02     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.83     KP        1.13     
!   LA        1.00     MK        1.13     NL        1.11     OV        0.95     
!   PT        0.96     SC        0.93     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.92     HN        0.82     KP        1.10     
!   LA        0.94     MK        1.08     NL        1.20     OV        0.95     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.06     HN        0.88     KP        1.00     
!   LA        1.02     MK        0.94     NL        1.07     OV        0.90     
!   PT        0.92     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.09     HN        0.95     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.04     OV        0.91     
!   PT        1.04     SC        0.86     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        1.00     HN        0.80     KP        1.04     
!   LA        0.88     MK        1.02     NL        1.06     OV        0.97     
!   PT        0.93     SC        0.89     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.74     KP        0.93     
!   LA        1.03     MK        0.92     NL        1.12     OV        1.09     
!   PT        0.88     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.056256Jy  sigma=1.214162
! Fit after  self-cal, rms=0.055157Jy  sigma=1.210333
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8168 mas, bmaj=2.026 mas, bpa=-1.803 degrees
! Estimated noise=0.179393 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000142086 Jy
! Component: 100  -  total flux cleaned = 8.72334e-05 Jy
! Component: 150  -  total flux cleaned = 8.73737e-05 Jy
! Component: 200  -  total flux cleaned = 6.01526e-05 Jy
! Total flux subtracted in 200 components = 6.01526e-05 Jy
! Clean residual min=-0.000903 max=0.000916 Jy/beam
! Clean residual mean=0.000002 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.0406695 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 60 components and 0.0406695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055145Jy  sigma=1.210089
! Fit after  self-cal, rms=0.055181Jy  sigma=1.209296
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055181Jy  sigma=1.209296
! Fit after  self-cal, rms=0.055453Jy  sigma=1.208298
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8151 mas, bmaj=2.027 mas, bpa=-1.722 degrees
! Estimated noise=0.179843 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000131403 Jy
! Component: 100  -  total flux cleaned = 0.000131897 Jy
! Component: 150  -  total flux cleaned = 0.000105522 Jy
! Component: 200  -  total flux cleaned = 8.14482e-05 Jy
! Total flux subtracted in 200 components = 8.14482e-05 Jy
! Clean residual min=-0.000918 max=0.000901 Jy/beam
! Clean residual mean=0.000002 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.0407509 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 66 components and 0.0407509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055446Jy  sigma=1.208139
! Fit after  self-cal, rms=0.055478Jy  sigma=1.207953
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.6648e-05 Jy
! Component: 100  -  total flux cleaned = 1.74914e-05 Jy
! Component: 150  -  total flux cleaned = 6.30048e-06 Jy
! Component: 200  -  total flux cleaned = 6.28061e-06 Jy
! Total flux subtracted in 200 components = 6.28061e-06 Jy
! Clean residual min=-0.000925 max=0.000916 Jy/beam
! Clean residual mean=0.000002 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.0407572 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 73 components and 0.0407572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055474Jy  sigma=1.207861
! Fit after  self-cal, rms=0.055470Jy  sigma=1.207709
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055470Jy  sigma=1.207709
! Fit after  self-cal, rms=0.056444Jy  sigma=1.206121
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8146 mas, bmaj=2.027 mas, bpa=-1.631 degrees
! Estimated noise=0.180902 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125788 Jy
! Component: 100  -  total flux cleaned = 0.000114741 Jy
! Component: 150  -  total flux cleaned = 8.56673e-05 Jy
! Component: 200  -  total flux cleaned = 7.67184e-05 Jy
! Total flux subtracted in 200 components = 7.67184e-05 Jy
! Clean residual min=-0.000942 max=0.000828 Jy/beam
! Clean residual mean=0.000001 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.0408339 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 84 components and 0.0408339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056440Jy  sigma=1.206032
! Fit after  self-cal, rms=0.056492Jy  sigma=1.205612
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.22013e-06 Jy
! Component: 100  -  total flux cleaned = -2.59833e-05 Jy
! Component: 150  -  total flux cleaned = -5.90382e-05 Jy
! Component: 200  -  total flux cleaned = -9.044e-05 Jy
! Total flux subtracted in 200 components = -9.044e-05 Jy
! Clean residual min=-0.000947 max=0.000846 Jy/beam
! Clean residual mean=0.000001 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.0407435 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 87 components and 0.0407435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056489Jy  sigma=1.205564
! Fit after  self-cal, rms=0.056490Jy  sigma=1.205558
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056490Jy  sigma=1.205558
! Fit after  self-cal, rms=0.057022Jy  sigma=1.205555
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.086 mas, bmaj=3.831 mas, bpa=1.088 degrees
! Estimated noise=0.241256 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000178599 Jy
! Component: 100  -  total flux cleaned = 0.00018641 Jy
! Component: 150  -  total flux cleaned = 0.000199898 Jy
! Component: 200  -  total flux cleaned = 0.000200224 Jy
! Total flux subtracted in 200 components = 0.000200224 Jy
! Clean residual min=-0.001044 max=0.000817 Jy/beam
! Clean residual mean=0.000003 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.0409437 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 94 components and 0.0409437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057021Jy  sigma=1.205518
! Fit after  self-cal, rms=0.057036Jy  sigma=1.205454
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.9096e-05 Jy
! Component: 100  -  total flux cleaned = -3.37878e-05 Jy
! Component: 150  -  total flux cleaned = -4.30078e-05 Jy
! Component: 200  -  total flux cleaned = -5.54602e-05 Jy
! Total flux subtracted in 200 components = -5.54602e-05 Jy
! Clean residual min=-0.001049 max=0.000803 Jy/beam
! Clean residual mean=0.000002 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.0408882 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 101 components and 0.0408882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057036Jy  sigma=1.205448
! Fit after  self-cal, rms=0.057037Jy  sigma=1.205444
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8136 mas, bmaj=2.026 mas, bpa=-1.607 degrees
! Estimated noise=0.181816 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8136 x 2.026 at -1.607 degrees (North through East)
! Clean map  min=-0.00082291  max=0.035081 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6225 mas, bmaj=1.661 mas, bpa=-1.614 degrees
! Estimated noise=0.32887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0278082 Jy
! Component: 100  -  total flux cleaned = 0.0341577 Jy
! Component: 150  -  total flux cleaned = 0.0360224 Jy
! Component: 200  -  total flux cleaned = 0.0372066 Jy
! Total flux subtracted in 200 components = 0.0372066 Jy
! Clean residual min=-0.002011 max=0.001892 Jy/beam
! Clean residual mean=0.000002 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.0372066 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0372066 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8136 mas, bmaj=2.026 mas, bpa=-1.607 degrees
! Estimated noise=0.181816 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139646 Jy
! Component: 100  -  total flux cleaned = 0.00235282 Jy
! Component: 150  -  total flux cleaned = 0.00281561 Jy
! Component: 200  -  total flux cleaned = 0.00305867 Jy
! Total flux subtracted in 200 components = 0.00305867 Jy
! Clean residual min=-0.001020 max=0.000860 Jy/beam
! Clean residual mean=0.000001 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.0402653 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 30 components and 0.0402653 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.086 mas, bmaj=3.831 mas, bpa=1.088 degrees
! Estimated noise=0.241256 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000448496 Jy
! Component: 100  -  total flux cleaned = 0.000554211 Jy
! Component: 150  -  total flux cleaned = 0.00056497 Jy
! Component: 200  -  total flux cleaned = 0.000573596 Jy
! Total flux subtracted in 200 components = 0.000573596 Jy
! Clean residual min=-0.001054 max=0.000803 Jy/beam
! Clean residual mean=0.000002 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.0408389 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.75249e-07 Jy
! Component: 100  -  total flux cleaned = -6.6934e-06 Jy
! Component: 150  -  total flux cleaned = -6.71758e-06 Jy
! Component: 200  -  total flux cleaned = -1.2536e-05 Jy
! Total flux subtracted in 200 components = -1.2536e-05 Jy
! Clean residual min=-0.001047 max=0.000801 Jy/beam
! Clean residual mean=0.000002 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.0408264 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 52 components and 0.0408264 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8136 mas, bmaj=2.026 mas, bpa=-1.607 degrees
! Estimated noise=0.181816 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.38989e-05 Jy
! Component: 100  -  total flux cleaned = -1.92864e-05 Jy
! Component: 150  -  total flux cleaned = -1.86051e-05 Jy
! Component: 200  -  total flux cleaned = -3.9742e-06 Jy
! Total flux subtracted in 200 components = -3.9742e-06 Jy
! Clean residual min=-0.000930 max=0.000837 Jy/beam
! Clean residual mean=0.000001 rms=0.000206 Jy/beam
! Combined flux in latest and established models = 0.0408224 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 63 components and 0.0408224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057051Jy  sigma=1.205682
! Fit after  self-cal, rms=0.057044Jy  sigma=1.205631
wmodel J0527-1002_X_map.mod
! Writing 63 model components to file: J0527-1002_X_map.mod
wobs   J0527-1002_X_uvs.fits
! Writing UV FITS file: J0527-1002_X_uvs.fits
wwins  J0527-1002_X_map.win
! wwins: Wrote 3 windows to J0527-1002_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000252895 Jy
! Component: 100  -  total flux cleaned = -0.000299352 Jy
! Component: 150  -  total flux cleaned = -0.000358359 Jy
! Component: 200  -  total flux cleaned = -0.000401348 Jy
! Component: 250  -  total flux cleaned = -0.000470651 Jy
! Component: 300  -  total flux cleaned = -0.000524593 Jy
! Component: 350  -  total flux cleaned = -0.000551259 Jy
! Component: 400  -  total flux cleaned = -0.000577368 Jy
! Component: 450  -  total flux cleaned = -0.000564661 Jy
! Component: 500  -  total flux cleaned = -0.000564832 Jy
! Component: 550  -  total flux cleaned = -0.000564849 Jy
! Component: 600  -  total flux cleaned = -0.000588932 Jy
! Component: 650  -  total flux cleaned = -0.000540868 Jy
! Component: 700  -  total flux cleaned = -0.000517215 Jy
! Component: 750  -  total flux cleaned = -0.000517285 Jy
! Component: 800  -  total flux cleaned = -0.000494324 Jy
! Component: 850  -  total flux cleaned = -0.000437576 Jy
! Component: 900  -  total flux cleaned = -0.000404028 Jy
! Component: 950  -  total flux cleaned = -0.000426055 Jy
! Component: 1000  -  total flux cleaned = -0.000349468 Jy
! Component: 1050  -  total flux cleaned = -0.000317055 Jy
! Component: 1100  -  total flux cleaned = -0.000295487 Jy
! Component: 1150  -  total flux cleaned = -0.000274173 Jy
! Component: 1200  -  total flux cleaned = -0.000242699 Jy
! Component: 1250  -  total flux cleaned = -0.000211628 Jy
! Component: 1300  -  total flux cleaned = -0.000201211 Jy
! Component: 1350  -  total flux cleaned = -0.000180946 Jy
! Component: 1400  -  total flux cleaned = -0.000150572 Jy
! Component: 1450  -  total flux cleaned = -0.000120613 Jy
! Component: 1500  -  total flux cleaned = -5.15247e-05 Jy
! Component: 1550  -  total flux cleaned = -5.16673e-05 Jy
! Component: 1600  -  total flux cleaned = -7.11277e-05 Jy
! Component: 1650  -  total flux cleaned = -4.22862e-05 Jy
! Component: 1700  -  total flux cleaned = -2.31836e-05 Jy
! Component: 1750  -  total flux cleaned = -2.3108e-05 Jy
! Component: 1800  -  total flux cleaned = -1.37232e-05 Jy
! Component: 1850  -  total flux cleaned = 4.20525e-05 Jy
! Component: 1900  -  total flux cleaned = 6.0631e-05 Jy
! Component: 1950  -  total flux cleaned = 4.22442e-05 Jy
! Component: 2000  -  total flux cleaned = 7.85937e-05 Jy
! Component: 2050  -  total flux cleaned = 6.05486e-05 Jy
! Component: 2100  -  total flux cleaned = 8.75212e-05 Jy
! Component: 2150  -  total flux cleaned = 5.21566e-05 Jy
! Component: 2200  -  total flux cleaned = 0.00010499 Jy
! Component: 2250  -  total flux cleaned = 0.00010498 Jy
! Component: 2300  -  total flux cleaned = 9.62271e-05 Jy
! Component: 2350  -  total flux cleaned = 0.000139337 Jy
! Component: 2400  -  total flux cleaned = 0.00012216 Jy
! Component: 2450  -  total flux cleaned = 0.000139075 Jy
! Component: 2500  -  total flux cleaned = 0.000155888 Jy
! Component: 2550  -  total flux cleaned = 0.000139049 Jy
! Component: 2600  -  total flux cleaned = 0.000122418 Jy
! Component: 2650  -  total flux cleaned = 0.000130761 Jy
! Component: 2700  -  total flux cleaned = 0.000147223 Jy
! Component: 2750  -  total flux cleaned = 0.000163571 Jy
! Component: 2800  -  total flux cleaned = 0.000114868 Jy
! Component: 2850  -  total flux cleaned = 0.000106731 Jy
! Component: 2900  -  total flux cleaned = 9.07293e-05 Jy
! Component: 2950  -  total flux cleaned = 9.06727e-05 Jy
! Component: 3000  -  total flux cleaned = 0.000106532 Jy
! Component: 3050  -  total flux cleaned = 8.28776e-05 Jy
! Component: 3100  -  total flux cleaned = 9.84859e-05 Jy
! Component: 3150  -  total flux cleaned = 5.94588e-05 Jy
! Component: 3200  -  total flux cleaned = 9.04449e-05 Jy
! Component: 3250  -  total flux cleaned = 7.50777e-05 Jy
! Component: 3300  -  total flux cleaned = 4.43927e-05 Jy
! Component: 3350  -  total flux cleaned = 7.49801e-05 Jy
! Component: 3400  -  total flux cleaned = 5.98531e-05 Jy
! Component: 3450  -  total flux cleaned = 4.46854e-05 Jy
! Component: 3500  -  total flux cleaned = 2.22128e-05 Jy
! Component: 3550  -  total flux cleaned = 1.47271e-05 Jy
! Component: 3600  -  total flux cleaned = 2.95718e-05 Jy
! Component: 3650  -  total flux cleaned = -1.48368e-05 Jy
! Component: 3700  -  total flux cleaned = -1.47443e-05 Jy
! Component: 3750  -  total flux cleaned = -3.67382e-05 Jy
! Component: 3800  -  total flux cleaned = -5.12342e-05 Jy
! Component: 3850  -  total flux cleaned = -2.22408e-05 Jy
! Component: 3900  -  total flux cleaned = -5.86749e-07 Jy
! Component: 3950  -  total flux cleaned = -5.08486e-05 Jy
! Component: 4000  -  total flux cleaned = -6.51368e-05 Jy
! Component: 4050  -  total flux cleaned = -7.93223e-05 Jy
! Total flux subtracted in 4096 components = -6.50985e-05 Jy
! Clean residual min=-0.000394 max=0.000540 Jy/beam
! Clean residual mean=0.000001 rms=0.000123 Jy/beam
! Combined flux in latest and established models = 0.0407573 Jy
keep
! Adding 313 model components to the UV plane model.
! The established model now contains 376 components and 0.0407573 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0527-1002_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8136 x 2.026 at -1.607 degrees (North through East)
! Clean map  min=-0.00074461  max=0.034932 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0527-1002_X_map.fits
wmodel /vlbi/uf001/uva//J0527-1002_X_map.mod
! Writing 376 model components to file: /vlbi/uf001/uva//J0527-1002_X_map.mod
wobs   /vlbi/uf001/uva//J0527-1002_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0527-1002_X_uvs.fits
wwins  /vlbi/uf001/uva//J0527-1002_X_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0527-1002_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0349319 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000122158 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.04911 1.04911 2.09821 4.19642 8.39285 16.7857 33.5714 67.1428
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.034 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  285.957 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0527-1002_X_dfm.log closed on Sun Jan 13 22:37:00 2019