! Started logfile: /vlbi/uf001/uvm//J0524-3126_X_a_dfm.log on Sun Jan 13 20:49:32 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0524-3126_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0524-3126_X_a_uvm.fits ! AN table 1: 102 integrations on 36 of 36 possible baselines. ! AN table 2: 37 integrations on 21 of 21 possible baselines. ! AN table 3: 36 integrations on 15 of 15 possible baselines. ! AN table 4: 37 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.950938 visibilities/baseline/integration-bin. ! Found source: J0524-3126 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 63264 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0524-3126_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 86 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 86 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 86 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 86 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 86 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 86 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 86 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 86 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 86 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 86 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 86 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 86 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.002045Jy sigma=20.376277 ! Fit after self-cal, rms=0.969469Jy sigma=19.708713 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5964 mas, bmaj=1.743 mas, bpa=-5.162 degrees ! Estimated noise=0.362479 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249476 Jy ! Component: 100 - total flux cleaned = 0.0303912 Jy ! Total flux subtracted in 100 components = 0.0303912 Jy ! Clean residual min=-0.002150 max=0.002256 Jy/beam ! Clean residual mean=0.000001 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0303912 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0303912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059344Jy sigma=1.170539 ! Fit after self-cal, rms=0.057634Jy sigma=1.135330 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387856 Jy ! Component: 100 - total flux cleaned = 0.0045319 Jy ! Total flux subtracted in 100 components = 0.0045319 Jy ! Clean residual min=-0.002275 max=0.002284 Jy/beam ! Clean residual mean=0.000001 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.0349231 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 0.0349231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057385Jy sigma=1.129855 ! Fit after self-cal, rms=0.057354Jy sigma=1.129472 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8733 mas, bmaj=2.399 mas, bpa=-6.065 degrees ! Estimated noise=0.142812 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120924 Jy ! Component: 100 - total flux cleaned = 0.00141579 Jy ! Component: 150 - total flux cleaned = 0.00144678 Jy ! Component: 200 - total flux cleaned = 0.0014474 Jy ! Total flux subtracted in 200 components = 0.0014474 Jy ! Clean residual min=-0.001379 max=0.001501 Jy/beam ! Clean residual mean=0.000001 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.0363705 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 16 components and 0.0363705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057332Jy sigma=1.128934 ! Fit after self-cal, rms=0.057313Jy sigma=1.128677 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8733 x 2.399 at -6.065 degrees (North through East) ! Clean map min=-0.0012999 max=0.035508 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.06 KP 1.07 LA 1.01 ! MK 1.10 NL 1.16 OV 1.02 PT 0.96 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.96 KP 1.08 LA 1.01 ! MK 1.07 NL 1.19 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.78 FD 0.94 KP 1.17 LA 1.10 ! NL 1.00 OV 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.74 FD 1.10 KP 1.08 LA 1.26 ! MK 1.13 OV 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.12 KP 1.03 LA 1.04 ! MK 1.03 NL 1.32 OV 1.01 PT 1.00 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.91 KP 1.09 LA 0.93 ! MK 1.14 NL 1.23 PT 0.85 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.85 FD 0.94 KP 1.22 LA 0.97 ! NL 1.13 OV 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.93 FD 1.10 KP 1.30 LA 1.08 ! MK 0.97 OV 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.10 KP 1.11 LA 1.05 ! MK 1.04 NL 1.27 OV 1.02 PT 0.95 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 0.97 KP 1.07 LA 1.01 ! MK 1.18 NL 1.18 PT 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.89 FD 1.01 KP 1.10 LA 1.13 ! NL 1.03 OV 0.90 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.83 FD 0.98 KP 1.19 LA 1.12 ! MK 0.95 OV 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 KP 1.01 LA 1.05 ! MK 1.12 NL 1.21 OV 1.00 PT 0.95 ! SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.01 KP 1.14 LA 0.92 ! MK 1.07 NL 1.23 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.72 FD 0.98 KP 1.32 LA 0.96 ! NL 1.07 OV 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.83 FD 0.91 KP 1.25 LA 1.06 ! MK 1.19 OV 0.93 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 KP 1.13 LA 1.04 ! MK 0.98 NL 1.25 OV 1.01 PT 0.98 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.98 KP 1.10 LA 0.96 ! MK 1.01 NL 1.06 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.74 FD 0.96 KP 1.38 LA 1.05 ! NL 0.97 OV 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.85 FD 1.01 KP 1.35 LA 1.08 ! MK 0.96 OV 0.91 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.05 KP 1.10 LA 1.05 ! MK 1.05 NL 1.20 OV 0.94 PT 0.98 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 0.89 KP 1.00 LA 0.92 ! MK 1.09 NL 1.17 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.69 FD 0.94 KP 1.34 LA 0.99 ! NL 0.94 OV 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.77 FD 1.12 KP 1.18 LA 1.01 ! MK 0.93 OV 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 KP 1.11 LA 1.00 ! MK 1.06 NL 1.15 OV 0.94 PT 0.95 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.93 KP 1.17 LA 0.99 ! MK 1.20 NL 1.09 PT 0.76 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.73 FD 0.96 KP 1.39 LA 0.97 ! NL 0.97 OV 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.74 FD 0.96 KP 1.26 LA 1.00 ! MK 1.05 OV 0.85 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 KP 1.07 LA 1.01 ! MK 1.14 NL 1.22 OV 0.91 PT 0.98 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.92 KP 1.16 LA 0.89 ! MK 1.03 NL 1.30 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.68 FD 0.97 KP 1.32 LA 0.95 ! NL 1.04 OV 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.72 FD 0.98 KP 1.17 LA 0.94 ! MK 1.00 OV 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 KP 1.01 LA 1.04 ! MK 1.02 NL 1.12 OV 0.94 PT 1.00 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.82 KP 1.11 LA 0.88 ! MK 0.87 NL 1.18 PT 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.68 FD 0.90 KP 1.15 LA 1.07 ! NL 0.94 OV 0.87 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.72 FD 0.98 KP 1.23 LA 1.01 ! MK 0.87 OV 0.93 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.05 KP 1.04 LA 1.04 ! MK 0.97 NL 1.18 OV 0.97 PT 0.95 ! SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.94 KP 0.95 LA 1.01 ! MK 0.96 NL 1.09 PT 0.88 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.64 FD 0.90 KP 1.35 LA 0.92 ! NL 1.20 OV 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.73 FD 1.10 KP 1.29 LA 1.08 ! MK 0.96 OV 0.76 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 KP 1.02 LA 0.99 ! MK 0.89 NL 1.15 OV 0.90 PT 0.90 ! SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.85 FD 0.89 KP 1.05 LA 0.83 ! MK 0.92 NL 1.15 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.60 FD 0.93 KP 1.10 LA 1.06 ! NL 0.95 OV 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.78 FD 1.00 KP 1.16 LA 1.09 ! MK 0.72 OV 0.91 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.91 KP 0.95 LA 1.03 ! MK 0.83 NL 1.17 OV 0.92 PT 0.83 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.69 FD 0.89 KP 1.07 LA 0.93 ! MK 0.96 NL 1.14 PT 0.80 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.63 FD 0.92 KP 1.20 LA 1.00 ! NL 1.03 OV 0.84 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.71 FD 0.91 KP 1.21 LA 0.91 ! MK 0.84 OV 0.93 ! ! ! Fit before self-cal, rms=0.057313Jy sigma=1.128677 ! Fit after self-cal, rms=0.057704Jy sigma=1.122179 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8757 mas, bmaj=2.388 mas, bpa=-5.554 degrees ! Estimated noise=0.141928 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130435 Jy ! Component: 100 - total flux cleaned = 0.00194835 Jy ! Component: 150 - total flux cleaned = 0.00226433 Jy ! Component: 200 - total flux cleaned = 0.00233614 Jy ! Total flux subtracted in 200 components = 0.00233614 Jy ! Clean residual min=-0.000786 max=0.000913 Jy/beam ! Clean residual mean=0.000000 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.0387066 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 41 components and 0.0387067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057676Jy sigma=1.121597 ! Fit after self-cal, rms=0.057816Jy sigma=1.119382 ! Inverting map ! Added new window around map position (-16.2, 13.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108794 Jy ! Component: 100 - total flux cleaned = 0.00177991 Jy ! Component: 150 - total flux cleaned = 0.00223299 Jy ! Component: 200 - total flux cleaned = 0.00248589 Jy ! Total flux subtracted in 200 components = 0.00248589 Jy ! Clean residual min=-0.000759 max=0.000740 Jy/beam ! Clean residual mean=-0.000000 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.0411925 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 60 components and 0.0411926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057791Jy sigma=1.118893 ! Fit after self-cal, rms=0.057780Jy sigma=1.118494 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057780Jy sigma=1.118494 ! Fit after self-cal, rms=0.058364Jy sigma=1.117713 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8765 mas, bmaj=2.376 mas, bpa=-5.336 degrees ! Estimated noise=0.141385 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000788499 Jy ! Component: 100 - total flux cleaned = 0.00129247 Jy ! Component: 150 - total flux cleaned = 0.00160278 Jy ! Component: 200 - total flux cleaned = 0.00169313 Jy ! Total flux subtracted in 200 components = 0.00169313 Jy ! Clean residual min=-0.000774 max=0.000732 Jy/beam ! Clean residual mean=-0.000000 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.0428857 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 80 components and 0.0428857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058350Jy sigma=1.117477 ! Fit after self-cal, rms=0.058416Jy sigma=1.117035 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000562016 Jy ! Component: 100 - total flux cleaned = 0.000838098 Jy ! Component: 150 - total flux cleaned = 0.00098011 Jy ! Component: 200 - total flux cleaned = 0.00106051 Jy ! Total flux subtracted in 200 components = 0.00106051 Jy ! Clean residual min=-0.000733 max=0.000724 Jy/beam ! Clean residual mean=-0.000000 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.0439462 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 86 components and 0.0439462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058408Jy sigma=1.116916 ! Fit after self-cal, rms=0.058396Jy sigma=1.116678 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058396Jy sigma=1.116678 ! Fit after self-cal, rms=0.059002Jy sigma=1.115900 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8773 mas, bmaj=2.368 mas, bpa=-5.24 degrees ! Estimated noise=0.141322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000523673 Jy ! Component: 100 - total flux cleaned = 0.000823618 Jy ! Component: 150 - total flux cleaned = 0.000907291 Jy ! Component: 200 - total flux cleaned = 0.000944391 Jy ! Total flux subtracted in 200 components = 0.000944391 Jy ! Clean residual min=-0.000753 max=0.000725 Jy/beam ! Clean residual mean=-0.000000 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.0448906 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 93 components and 0.0448906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058995Jy sigma=1.115799 ! Fit after self-cal, rms=0.059056Jy sigma=1.115358 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000382522 Jy ! Component: 100 - total flux cleaned = 0.000501734 Jy ! Component: 150 - total flux cleaned = 0.000529757 Jy ! Component: 200 - total flux cleaned = 0.000538831 Jy ! Total flux subtracted in 200 components = 0.000538831 Jy ! Clean residual min=-0.000735 max=0.000742 Jy/beam ! Clean residual mean=-0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.0454294 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 97 components and 0.0454294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059051Jy sigma=1.115294 ! Fit after self-cal, rms=0.059051Jy sigma=1.115244 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059051Jy sigma=1.115244 ! Fit after self-cal, rms=0.059507Jy sigma=1.115127 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.572 mas, bmaj=6.786 mas, bpa=3.518 degrees ! Estimated noise=0.174483 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000381082 Jy ! Component: 100 - total flux cleaned = 0.000511446 Jy ! Component: 150 - total flux cleaned = 0.000539546 Jy ! Component: 200 - total flux cleaned = 0.000551939 Jy ! Total flux subtracted in 200 components = 0.000551939 Jy ! Clean residual min=-0.000900 max=0.000790 Jy/beam ! Clean residual mean=-0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.0459813 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 0.0459813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059505Jy sigma=1.115123 ! Fit after self-cal, rms=0.059534Jy sigma=1.114859 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026195 Jy ! Component: 100 - total flux cleaned = 0.000329061 Jy ! Component: 150 - total flux cleaned = 0.000346644 Jy ! Component: 200 - total flux cleaned = 0.000346725 Jy ! Total flux subtracted in 200 components = 0.000346725 Jy ! Clean residual min=-0.000871 max=0.000836 Jy/beam ! Clean residual mean=-0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.0463281 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 119 components and 0.0463281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059532Jy sigma=1.114865 ! Fit after self-cal, rms=0.059528Jy sigma=1.114831 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8776 mas, bmaj=2.365 mas, bpa=-5.211 degrees ! Estimated noise=0.141373 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8776 x 2.365 at -5.211 degrees (North through East) ! Clean map min=-0.00070788 max=0.035186 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5977 mas, bmaj=1.719 mas, bpa=-4.119 degrees ! Estimated noise=0.363028 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271175 Jy ! Component: 100 - total flux cleaned = 0.0331136 Jy ! Component: 150 - total flux cleaned = 0.0358744 Jy ! Component: 200 - total flux cleaned = 0.0380503 Jy ! Total flux subtracted in 200 components = 0.0380503 Jy ! Clean residual min=-0.002279 max=0.002058 Jy/beam ! Clean residual mean=0.000001 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0380503 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0380503 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8776 mas, bmaj=2.365 mas, bpa=-5.211 degrees ! Estimated noise=0.141373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238193 Jy ! Component: 100 - total flux cleaned = 0.00401014 Jy ! Component: 150 - total flux cleaned = 0.00522278 Jy ! Component: 200 - total flux cleaned = 0.00614127 Jy ! Total flux subtracted in 200 components = 0.00614127 Jy ! Clean residual min=-0.000879 max=0.000848 Jy/beam ! Clean residual mean=-0.000000 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.0441916 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 62 components and 0.0441916 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.572 mas, bmaj=6.786 mas, bpa=3.518 degrees ! Estimated noise=0.174483 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000889423 Jy ! Component: 100 - total flux cleaned = 0.00147353 Jy ! Component: 150 - total flux cleaned = 0.00188974 Jy ! Component: 200 - total flux cleaned = 0.00212519 Jy ! Total flux subtracted in 200 components = 0.00212519 Jy ! Clean residual min=-0.000908 max=0.000802 Jy/beam ! Clean residual mean=-0.000000 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.0463168 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.14467e-05 Jy ! Component: 100 - total flux cleaned = 7.06697e-05 Jy ! Component: 150 - total flux cleaned = 8.88863e-05 Jy ! Component: 200 - total flux cleaned = 0.000113267 Jy ! Total flux subtracted in 200 components = 0.000113267 Jy ! Clean residual min=-0.000888 max=0.000830 Jy/beam ! Clean residual mean=-0.000000 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.0464301 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 93 components and 0.0464301 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8776 mas, bmaj=2.365 mas, bpa=-5.211 degrees ! Estimated noise=0.141373 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012759 Jy ! Component: 100 - total flux cleaned = -9.42656e-05 Jy ! Component: 150 - total flux cleaned = -6.36304e-05 Jy ! Component: 200 - total flux cleaned = -2.21241e-05 Jy ! Total flux subtracted in 200 components = -2.21241e-05 Jy ! Clean residual min=-0.000756 max=0.000706 Jy/beam ! Clean residual mean=-0.000000 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.0464079 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 104 components and 0.0464079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059537Jy sigma=1.115027 ! Fit after self-cal, rms=0.059533Jy sigma=1.114929 wmodel J0524-3126_X_a_map.mod ! Writing 104 model components to file: J0524-3126_X_a_map.mod wobs J0524-3126_X_a_uvs.fits ! Writing UV FITS file: J0524-3126_X_a_uvs.fits wwins J0524-3126_X_a_map.win ! wwins: Wrote 3 windows to J0524-3126_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110877 Jy ! Component: 100 - total flux cleaned = -0.00014559 Jy ! Component: 150 - total flux cleaned = -0.000145912 Jy ! Component: 200 - total flux cleaned = -0.000156383 Jy ! Component: 250 - total flux cleaned = -0.000176942 Jy ! Component: 300 - total flux cleaned = -0.000196926 Jy ! Component: 350 - total flux cleaned = -0.000177602 Jy ! Component: 400 - total flux cleaned = -0.000177663 Jy ! Component: 450 - total flux cleaned = -0.000177599 Jy ! Component: 500 - total flux cleaned = -0.000195767 Jy ! Component: 550 - total flux cleaned = -0.000186788 Jy ! Component: 600 - total flux cleaned = -0.000195559 Jy ! Component: 650 - total flux cleaned = -0.000186811 Jy ! Component: 700 - total flux cleaned = -0.000178341 Jy ! Component: 750 - total flux cleaned = -0.000161639 Jy ! Component: 800 - total flux cleaned = -0.000178372 Jy ! Component: 850 - total flux cleaned = -0.000153796 Jy ! Component: 900 - total flux cleaned = -0.000178214 Jy ! Component: 950 - total flux cleaned = -0.000186184 Jy ! Component: 1000 - total flux cleaned = -0.000178249 Jy ! Component: 1050 - total flux cleaned = -0.000193898 Jy ! Component: 1100 - total flux cleaned = -0.000201626 Jy ! Component: 1150 - total flux cleaned = -0.000224558 Jy ! Component: 1200 - total flux cleaned = -0.000209278 Jy ! Component: 1250 - total flux cleaned = -0.000201785 Jy ! Component: 1300 - total flux cleaned = -0.0001869 Jy ! Component: 1350 - total flux cleaned = -0.000201607 Jy ! Component: 1400 - total flux cleaned = -0.000223454 Jy ! Component: 1450 - total flux cleaned = -0.000216217 Jy ! Component: 1500 - total flux cleaned = -0.000216275 Jy ! Component: 1550 - total flux cleaned = -0.000265966 Jy ! Component: 1600 - total flux cleaned = -0.000244846 Jy ! Component: 1650 - total flux cleaned = -0.000272848 Jy ! Component: 1700 - total flux cleaned = -0.000272715 Jy ! Component: 1750 - total flux cleaned = -0.000252168 Jy ! Component: 1800 - total flux cleaned = -0.000286263 Jy ! Component: 1850 - total flux cleaned = -0.000259241 Jy ! Component: 1900 - total flux cleaned = -0.000259206 Jy ! Component: 1950 - total flux cleaned = -0.000265886 Jy ! Component: 2000 - total flux cleaned = -0.00025929 Jy ! Component: 2050 - total flux cleaned = -0.000265876 Jy ! Component: 2100 - total flux cleaned = -0.000272417 Jy ! Component: 2150 - total flux cleaned = -0.000259435 Jy ! Component: 2200 - total flux cleaned = -0.000240169 Jy ! Component: 2250 - total flux cleaned = -0.000272151 Jy ! Component: 2300 - total flux cleaned = -0.000297563 Jy ! Component: 2350 - total flux cleaned = -0.000291221 Jy ! Component: 2400 - total flux cleaned = -0.00029121 Jy ! Component: 2450 - total flux cleaned = -0.000297483 Jy ! Component: 2500 - total flux cleaned = -0.000309834 Jy ! Component: 2550 - total flux cleaned = -0.000309829 Jy ! Component: 2600 - total flux cleaned = -0.000315939 Jy ! Component: 2650 - total flux cleaned = -0.00030986 Jy ! Component: 2700 - total flux cleaned = -0.000339974 Jy ! Component: 2750 - total flux cleaned = -0.000333906 Jy ! Component: 2800 - total flux cleaned = -0.00035183 Jy ! Component: 2850 - total flux cleaned = -0.000369589 Jy ! Component: 2900 - total flux cleaned = -0.00036957 Jy ! Component: 2950 - total flux cleaned = -0.000375473 Jy ! Component: 3000 - total flux cleaned = -0.000392985 Jy ! Component: 3050 - total flux cleaned = -0.000410368 Jy ! Component: 3100 - total flux cleaned = -0.000444909 Jy ! Component: 3150 - total flux cleaned = -0.000450671 Jy ! Component: 3200 - total flux cleaned = -0.000484811 Jy ! Component: 3250 - total flux cleaned = -0.000473526 Jy ! Component: 3300 - total flux cleaned = -0.000501704 Jy ! Component: 3350 - total flux cleaned = -0.0005241 Jy ! Component: 3400 - total flux cleaned = -0.000535234 Jy ! Component: 3450 - total flux cleaned = -0.000557445 Jy ! Component: 3500 - total flux cleaned = -0.000546382 Jy ! Component: 3550 - total flux cleaned = -0.000568313 Jy ! Component: 3600 - total flux cleaned = -0.000606531 Jy ! Component: 3650 - total flux cleaned = -0.00062281 Jy ! Component: 3700 - total flux cleaned = -0.000638972 Jy ! Component: 3750 - total flux cleaned = -0.000633591 Jy ! Component: 3800 - total flux cleaned = -0.000660326 Jy ! Component: 3850 - total flux cleaned = -0.000665599 Jy ! Component: 3900 - total flux cleaned = -0.000676135 Jy ! Component: 3950 - total flux cleaned = -0.000697207 Jy ! Component: 4000 - total flux cleaned = -0.000712942 Jy ! Component: 4050 - total flux cleaned = -0.000718143 Jy ! Total flux subtracted in 4096 components = -0.000728544 Jy ! Clean residual min=-0.000267 max=0.000305 Jy/beam ! Clean residual mean=-0.000000 rms=0.000090 Jy/beam ! Combined flux in latest and established models = 0.0456794 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 370 components and 0.0456794 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0524-3126_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8776 x 2.365 at -5.211 degrees (North through East) ! Clean map min=-0.0005217 max=0.035012 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0524-3126_X_a_map.fits wmodel /vlbi/uf001/uvm//J0524-3126_X_a_map.mod ! Writing 370 model components to file: /vlbi/uf001/uvm//J0524-3126_X_a_map.mod wobs /vlbi/uf001/uvm//J0524-3126_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0524-3126_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0524-3126_X_a_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uvm//J0524-3126_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0350117 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 8.95914e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.76767 0.76767 1.53534 3.07068 6.14136 12.2827 24.5655 49.1309 98.2618 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.035 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 390.792 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0524-3126_X_a_dfm.log closed on Sun Jan 13 20:49:39 2019