! Started logfile: /vlbi/uf001/uvm//J0524-3126_S_a_dfm.log on Sun Jan 13 20:49:26 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0524-3126_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0524-3126_S_a_uvm.fits
! AN table 1: 34 integrations on 15 of 15 possible baselines.
! AN table 2: 102 integrations on 21 of 21 possible baselines.
! AN table 3: 37 integrations on 6 of 6 possible baselines.
! AN table 4: 73 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.754717 visibilities/baseline/integration-bin.
! Found source: J0524-3126
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8160 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0524-3126_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 298 telescope corrections were flagged in sub-array 2.
!  A total of 4 telescope corrections were flagged in sub-array 3.
!  A total of 5 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 298 telescope corrections were flagged in sub-array 2.
!  A total of 4 telescope corrections were flagged in sub-array 3.
!  A total of 5 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 298 telescope corrections were flagged in sub-array 2.
!  A total of 4 telescope corrections were flagged in sub-array 3.
!  A total of 5 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=1.006131Jy  sigma=16.656627
! Fit after  self-cal, rms=0.934804Jy  sigma=15.500084
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.621 mas, bmaj=22.62 mas, bpa=23.27 degrees
! Estimated noise=0.862444 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0459859 Jy
! Component: 100  -  total flux cleaned = 0.0609821 Jy
! Total flux subtracted in 100 components = 0.0609821 Jy
! Clean residual min=-0.004302 max=0.007134 Jy/beam
! Clean residual mean=-0.000039 rms=0.001543 Jy/beam
! Combined flux in latest and established models = 0.0609821 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.0609821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084312Jy  sigma=1.195516
! Fit after  self-cal, rms=0.083147Jy  sigma=1.175797
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00982782 Jy
! Component: 100  -  total flux cleaned = 0.0157251 Jy
! Total flux subtracted in 100 components = 0.0157251 Jy
! Clean residual min=-0.003857 max=0.005551 Jy/beam
! Clean residual mean=-0.000023 rms=0.001171 Jy/beam
! Combined flux in latest and established models = 0.0767072 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 71 components and 0.0767072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081216Jy  sigma=1.140895
! Fit after  self-cal, rms=0.081095Jy  sigma=1.139223
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.338 mas, bmaj=28.15 mas, bpa=22.04 degrees
! Estimated noise=0.500689 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00740212 Jy
! Component: 100  -  total flux cleaned = 0.0113831 Jy
! Component: 150  -  total flux cleaned = 0.0131434 Jy
! Component: 200  -  total flux cleaned = 0.0134935 Jy
! Total flux subtracted in 200 components = 0.0134935 Jy
! Clean residual min=-0.002723 max=0.005909 Jy/beam
! Clean residual mean=-0.000006 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.0902007 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 101 components and 0.0902007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080322Jy  sigma=1.126670
! Fit after  self-cal, rms=0.080204Jy  sigma=1.125384
! Inverting map 
! Added new window around map position (-18.5, -26).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00490276 Jy
! Component: 100  -  total flux cleaned = 0.0054394 Jy
! Component: 150  -  total flux cleaned = 0.00515101 Jy
! Component: 200  -  total flux cleaned = 0.0051024 Jy
! Total flux subtracted in 200 components = 0.0051024 Jy
! Clean residual min=-0.001944 max=0.002264 Jy/beam
! Clean residual mean=0.000009 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.0953031 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 134 components and 0.0953031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079899Jy  sigma=1.119322
! Fit after  self-cal, rms=0.079793Jy  sigma=1.117690
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.338 x 28.15 at 22.04 degrees (North through East)
! Clean map  min=-0.0023141  max=0.063919 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        0.96     KP        1.20     LA        0.97     
!   OV        0.96     PT        1.10     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00     KP        1.03     LA        1.00     NL        0.89     
!   OV        1.01     PT        1.07     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.03     KP        1.10     LA        0.94     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.90     FD        0.93     KP        0.96     LA        0.97     
!   OV        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.90     KP        0.98     LA        1.03     
!   OV        0.94     PT        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     KP        1.04     LA        0.96     NL        0.87     
!   OV        1.11     PT        1.03     SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.98     KP        0.98     LA        0.92     PT        1.08     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.93     FD        1.03     KP        1.01     LA        0.95     
!   OV        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.96     KP        1.03     LA        1.03     
!   OV        0.92     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.96     KP        0.99     LA        0.99     NL        0.83     
!   OV        1.08     PT        1.05     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.95     KP        1.10     LA        0.97     PT        0.97     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.91     FD        1.01     KP        1.04     LA        1.01     
!   OV        1.01     
! 
! 
! Fit before self-cal, rms=0.079793Jy  sigma=1.117690
! Fit after  self-cal, rms=0.077520Jy  sigma=1.114017
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.375 mas, bmaj=27.55 mas, bpa=21.99 degrees
! Estimated noise=0.49376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121415 Jy
! Component: 100  -  total flux cleaned = 0.00156114 Jy
! Component: 150  -  total flux cleaned = 0.00175228 Jy
! Component: 200  -  total flux cleaned = 0.00175459 Jy
! Total flux subtracted in 200 components = 0.00175459 Jy
! Clean residual min=-0.002047 max=0.001534 Jy/beam
! Clean residual mean=0.000012 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.0970577 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 162 components and 0.0970577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077476Jy  sigma=1.113350
! Fit after  self-cal, rms=0.077470Jy  sigma=1.112873
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077470Jy  sigma=1.112873
! Fit after  self-cal, rms=0.075222Jy  sigma=1.110426
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.389 mas, bmaj=27.42 mas, bpa=21.97 degrees
! Estimated noise=0.493249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000840619 Jy
! Component: 100  -  total flux cleaned = 0.000949607 Jy
! Component: 150  -  total flux cleaned = 0.00101937 Jy
! Component: 200  -  total flux cleaned = 0.00112481 Jy
! Total flux subtracted in 200 components = 0.00112481 Jy
! Clean residual min=-0.001914 max=0.001572 Jy/beam
! Clean residual mean=0.000006 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.0981825 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 181 components and 0.0981825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075204Jy  sigma=1.110115
! Fit after  self-cal, rms=0.075176Jy  sigma=1.109839
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000253069 Jy
! Component: 100  -  total flux cleaned = 0.000369578 Jy
! Component: 150  -  total flux cleaned = 0.000389742 Jy
! Component: 200  -  total flux cleaned = 0.000428551 Jy
! Total flux subtracted in 200 components = 0.000428551 Jy
! Clean residual min=-0.001912 max=0.001623 Jy/beam
! Clean residual mean=0.000008 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.0986111 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 203 components and 0.098611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075165Jy  sigma=1.109627
! Fit after  self-cal, rms=0.075159Jy  sigma=1.109606
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075159Jy  sigma=1.109606
! Fit after  self-cal, rms=0.075094Jy  sigma=1.108906
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.381 mas, bmaj=27.46 mas, bpa=22.03 degrees
! Estimated noise=0.493302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000561715 Jy
! Component: 100  -  total flux cleaned = 0.000718662 Jy
! Component: 150  -  total flux cleaned = 0.000841033 Jy
! Component: 200  -  total flux cleaned = 0.000973673 Jy
! Total flux subtracted in 200 components = 0.000973673 Jy
! Clean residual min=-0.001684 max=0.001683 Jy/beam
! Clean residual mean=0.000005 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.0995847 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 221 components and 0.0995847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075084Jy  sigma=1.108680
! Fit after  self-cal, rms=0.075090Jy  sigma=1.108282
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000267623 Jy
! Component: 100  -  total flux cleaned = 0.000310535 Jy
! Component: 150  -  total flux cleaned = 0.000349723 Jy
! Component: 200  -  total flux cleaned = 0.000348848 Jy
! Total flux subtracted in 200 components = 0.000348848 Jy
! Clean residual min=-0.001698 max=0.001616 Jy/beam
! Clean residual mean=0.000006 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.0999336 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 232 components and 0.0999336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075080Jy  sigma=1.108114
! Fit after  self-cal, rms=0.075036Jy  sigma=1.107927
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075036Jy  sigma=1.107927
! Fit after  self-cal, rms=0.074934Jy  sigma=1.107861
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.03 mas, bmaj=36.86 mas, bpa=9.692 degrees
! Estimated noise=0.527618 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00042408 Jy
! Component: 100  -  total flux cleaned = 0.000589393 Jy
! Component: 150  -  total flux cleaned = 0.000664912 Jy
! Component: 200  -  total flux cleaned = 0.00069462 Jy
! Total flux subtracted in 200 components = 0.00069462 Jy
! Clean residual min=-0.001542 max=0.001335 Jy/beam
! Clean residual mean=0.000004 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.100628 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 266 components and 0.100628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074931Jy  sigma=1.107778
! Fit after  self-cal, rms=0.074938Jy  sigma=1.107748
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000150124 Jy
! Component: 100  -  total flux cleaned = 0.000180531 Jy
! Component: 150  -  total flux cleaned = 0.00021903 Jy
! Component: 200  -  total flux cleaned = 0.000264216 Jy
! Total flux subtracted in 200 components = 0.000264216 Jy
! Clean residual min=-0.001566 max=0.001318 Jy/beam
! Clean residual mean=0.000006 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.100892 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 287 components and 0.100892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074936Jy  sigma=1.107701
! Fit after  self-cal, rms=0.074936Jy  sigma=1.107694
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.37 mas, bmaj=27.45 mas, bpa=22.05 degrees
! Estimated noise=0.493378 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.37 x 27.45 at 22.05 degrees (North through East)
! Clean map  min=-0.0015793  max=0.062875 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.651 mas, bmaj=21.95 mas, bpa=23.25 degrees
! Estimated noise=0.847124 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0455842 Jy
! Component: 100  -  total flux cleaned = 0.0634488 Jy
! Component: 150  -  total flux cleaned = 0.0739415 Jy
! Component: 200  -  total flux cleaned = 0.0811736 Jy
! Total flux subtracted in 200 components = 0.0811736 Jy
! Clean residual min=-0.004776 max=0.004035 Jy/beam
! Clean residual mean=-0.000018 rms=0.001161 Jy/beam
! Combined flux in latest and established models = 0.0811737 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 53 model components to the UV plane model.
! The established model now contains 53 components and 0.0811737 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.37 mas, bmaj=27.45 mas, bpa=22.05 degrees
! Estimated noise=0.493378 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00778924 Jy
! Component: 100  -  total flux cleaned = 0.0123235 Jy
! Component: 150  -  total flux cleaned = 0.0146008 Jy
! Component: 200  -  total flux cleaned = 0.0159298 Jy
! Total flux subtracted in 200 components = 0.0159298 Jy
! Clean residual min=-0.002241 max=0.001772 Jy/beam
! Clean residual mean=0.000003 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.0971034 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 119 components and 0.0971034 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.03 mas, bmaj=36.86 mas, bpa=9.692 degrees
! Estimated noise=0.527618 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115033 Jy
! Component: 100  -  total flux cleaned = 0.00202145 Jy
! Component: 150  -  total flux cleaned = 0.00268711 Jy
! Component: 200  -  total flux cleaned = 0.00323746 Jy
! Total flux subtracted in 200 components = 0.00323746 Jy
! Clean residual min=-0.002088 max=0.001341 Jy/beam
! Clean residual mean=0.000012 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.100341 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000334076 Jy
! Component: 100  -  total flux cleaned = 0.000408199 Jy
! Component: 150  -  total flux cleaned = 0.000430126 Jy
! Component: 200  -  total flux cleaned = 0.000472407 Jy
! Total flux subtracted in 200 components = 0.000472407 Jy
! Clean residual min=-0.001955 max=0.001296 Jy/beam
! Clean residual mean=0.000011 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.100813 Jy
! Adding 85 model components to the UV plane model.
! The established model now contains 198 components and 0.100813 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.37 mas, bmaj=27.45 mas, bpa=22.05 degrees
! Estimated noise=0.493378 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.15418e-05 Jy
! Component: 100  -  total flux cleaned = -0.00010696 Jy
! Component: 150  -  total flux cleaned = -7.58007e-05 Jy
! Component: 200  -  total flux cleaned = -1.42862e-05 Jy
! Total flux subtracted in 200 components = -1.42862e-05 Jy
! Clean residual min=-0.001808 max=0.001676 Jy/beam
! Clean residual mean=0.000007 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.100799 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 220 components and 0.100799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074964Jy  sigma=1.108159
! Fit after  self-cal, rms=0.074968Jy  sigma=1.108003
wmodel J0524-3126_S_a_map.mod
! Writing 220 model components to file: J0524-3126_S_a_map.mod
wobs   J0524-3126_S_a_uvs.fits
! Writing UV FITS file: J0524-3126_S_a_uvs.fits
wwins  J0524-3126_S_a_map.win
! wwins: Wrote 2 windows to J0524-3126_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000233313 Jy
! Component: 100  -  total flux cleaned = -0.000500436 Jy
! Component: 150  -  total flux cleaned = -0.000723445 Jy
! Component: 200  -  total flux cleaned = -0.000862108 Jy
! Component: 250  -  total flux cleaned = -0.00101331 Jy
! Component: 300  -  total flux cleaned = -0.00117651 Jy
! Component: 350  -  total flux cleaned = -0.00127373 Jy
! Component: 400  -  total flux cleaned = -0.0012926 Jy
! Component: 450  -  total flux cleaned = -0.0013463 Jy
! Component: 500  -  total flux cleaned = -0.00134555 Jy
! Component: 550  -  total flux cleaned = -0.00141366 Jy
! Component: 600  -  total flux cleaned = -0.00141378 Jy
! Component: 650  -  total flux cleaned = -0.00146268 Jy
! Component: 700  -  total flux cleaned = -0.00144673 Jy
! Component: 750  -  total flux cleaned = -0.00144675 Jy
! Component: 800  -  total flux cleaned = -0.00144685 Jy
! Component: 850  -  total flux cleaned = -0.00143164 Jy
! Component: 900  -  total flux cleaned = -0.00141712 Jy
! Component: 950  -  total flux cleaned = -0.0014456 Jy
! Component: 1000  -  total flux cleaned = -0.00144578 Jy
! Component: 1050  -  total flux cleaned = -0.00144594 Jy
! Component: 1100  -  total flux cleaned = -0.00143258 Jy
! Component: 1150  -  total flux cleaned = -0.00144581 Jy
! Component: 1200  -  total flux cleaned = -0.00147188 Jy
! Component: 1250  -  total flux cleaned = -0.00149745 Jy
! Component: 1300  -  total flux cleaned = -0.00150993 Jy
! Component: 1350  -  total flux cleaned = -0.00151003 Jy
! Component: 1400  -  total flux cleaned = -0.00152219 Jy
! Component: 1450  -  total flux cleaned = -0.00155817 Jy
! Component: 1500  -  total flux cleaned = -0.00158179 Jy
! Component: 1550  -  total flux cleaned = -0.00159338 Jy
! Component: 1600  -  total flux cleaned = -0.00162758 Jy
! Component: 1650  -  total flux cleaned = -0.00161611 Jy
! Component: 1700  -  total flux cleaned = -0.00161607 Jy
! Component: 1750  -  total flux cleaned = -0.001627 Jy
! Component: 1800  -  total flux cleaned = -0.00162702 Jy
! Component: 1850  -  total flux cleaned = -0.00166991 Jy
! Component: 1900  -  total flux cleaned = -0.00162726 Jy
! Component: 1950  -  total flux cleaned = -0.00161675 Jy
! Component: 2000  -  total flux cleaned = -0.00161691 Jy
! Component: 2050  -  total flux cleaned = -0.00160664 Jy
! Component: 2100  -  total flux cleaned = -0.0015558 Jy
! Component: 2150  -  total flux cleaned = -0.00155577 Jy
! Component: 2200  -  total flux cleaned = -0.00153579 Jy
! Component: 2250  -  total flux cleaned = -0.00153582 Jy
! Component: 2300  -  total flux cleaned = -0.00150642 Jy
! Component: 2350  -  total flux cleaned = -0.00147728 Jy
! Component: 2400  -  total flux cleaned = -0.0014869 Jy
! Component: 2450  -  total flux cleaned = -0.00146774 Jy
! Component: 2500  -  total flux cleaned = -0.00146775 Jy
! Component: 2550  -  total flux cleaned = -0.00142058 Jy
! Component: 2600  -  total flux cleaned = -0.00142998 Jy
! Component: 2650  -  total flux cleaned = -0.00141143 Jy
! Component: 2700  -  total flux cleaned = -0.00134695 Jy
! Component: 2750  -  total flux cleaned = -0.00133783 Jy
! Component: 2800  -  total flux cleaned = -0.00131052 Jy
! Component: 2850  -  total flux cleaned = -0.00128343 Jy
! Component: 2900  -  total flux cleaned = -0.00125648 Jy
! Component: 2950  -  total flux cleaned = -0.00121196 Jy
! Component: 3000  -  total flux cleaned = -0.00120313 Jy
! Component: 3050  -  total flux cleaned = -0.0011678 Jy
! Component: 3100  -  total flux cleaned = -0.00109759 Jy
! Component: 3150  -  total flux cleaned = -0.00105408 Jy
! Component: 3200  -  total flux cleaned = -0.00101942 Jy
! Component: 3250  -  total flux cleaned = -0.000950493 Jy
! Component: 3300  -  total flux cleaned = -0.000950488 Jy
! Component: 3350  -  total flux cleaned = -0.00088228 Jy
! Component: 3400  -  total flux cleaned = -0.000839875 Jy
! Component: 3450  -  total flux cleaned = -0.00080626 Jy
! Component: 3500  -  total flux cleaned = -0.000772671 Jy
! Component: 3550  -  total flux cleaned = -0.000739225 Jy
! Component: 3600  -  total flux cleaned = -0.000672695 Jy
! Component: 3650  -  total flux cleaned = -0.000631293 Jy
! Component: 3700  -  total flux cleaned = -0.000590096 Jy
! Component: 3750  -  total flux cleaned = -0.00052444 Jy
! Component: 3800  -  total flux cleaned = -0.000508086 Jy
! Component: 3850  -  total flux cleaned = -0.000467355 Jy
! Component: 3900  -  total flux cleaned = -0.000451162 Jy
! Component: 3950  -  total flux cleaned = -0.00041877 Jy
! Component: 4000  -  total flux cleaned = -0.000386558 Jy
! Component: 4050  -  total flux cleaned = -0.000346348 Jy
! Total flux subtracted in 4096 components = -0.000314345 Jy
! Clean residual min=-0.000500 max=0.000459 Jy/beam
! Clean residual mean=0.000008 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.100485 Jy
keep
! Adding 213 model components to the UV plane model.
! The established model now contains 433 components and 0.100485 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0524-3126_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.37 x 27.45 at 22.05 degrees (North through East)
! Clean map  min=-0.0016267  max=0.061771 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0524-3126_S_a_map.fits
wmodel /vlbi/uf001/uvm//J0524-3126_S_a_map.mod
! Writing 433 model components to file: /vlbi/uf001/uvm//J0524-3126_S_a_map.mod
wobs   /vlbi/uf001/uvm//J0524-3126_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0524-3126_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J0524-3126_S_a_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J0524-3126_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0617714 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00015653 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.760208 0.760208 1.52042 3.04083 6.08166 12.1633 24.3267 48.6533 97.3066
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.061 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  394.628 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0524-3126_S_a_dfm.log closed on Sun Jan 13 20:49:31 2019