! Started logfile: /vlbi/uf001/uva//J0524-2818_X_dfm.log on Sun Jan 13 22:36:21 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0524-2818_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0524-2818_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.881746 visibilities/baseline/integration-bin.
! Found source: J0524-2818
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13332 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0524-2818_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005624Jy  sigma=19.026897
! Fit after  self-cal, rms=0.891816Jy  sigma=16.777999
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6671 mas, bmaj=2.023 mas, bpa=1.681 degrees
! Estimated noise=0.595389 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0784041 Jy
! Component: 100  -  total flux cleaned = 0.10592 Jy
! Total flux subtracted in 100 components = 0.10592 Jy
! Clean residual min=-0.005721 max=0.012080 Jy/beam
! Clean residual mean=-0.000034 rms=0.001588 Jy/beam
! Combined flux in latest and established models = 0.105921 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.105921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077858Jy  sigma=1.373536
! Fit after  self-cal, rms=0.077420Jy  sigma=1.367262
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013949 Jy
! Component: 100  -  total flux cleaned = 0.0219468 Jy
! Total flux subtracted in 100 components = 0.0219468 Jy
! Clean residual min=-0.004323 max=0.007361 Jy/beam
! Clean residual mean=-0.000017 rms=0.001127 Jy/beam
! Combined flux in latest and established models = 0.127867 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 0.127867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073862Jy  sigma=1.272861
! Fit after  self-cal, rms=0.073834Jy  sigma=1.272477
! Inverting map 
! Added new window around map position (1.4, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00701269 Jy
! Component: 100  -  total flux cleaned = 0.011416 Jy
! Total flux subtracted in 100 components = 0.011416 Jy
! Clean residual min=-0.003762 max=0.006145 Jy/beam
! Clean residual mean=-0.000009 rms=0.000980 Jy/beam
! Combined flux in latest and established models = 0.139283 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 31 components and 0.139283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072843Jy  sigma=1.248081
! Fit after  self-cal, rms=0.072772Jy  sigma=1.246403
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8671 mas, bmaj=2.536 mas, bpa=1.261 degrees
! Estimated noise=0.357547 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00627676 Jy
! Component: 100  -  total flux cleaned = 0.0100897 Jy
! Component: 150  -  total flux cleaned = 0.0125293 Jy
! Component: 200  -  total flux cleaned = 0.0140987 Jy
! Total flux subtracted in 200 components = 0.0140987 Jy
! Clean residual min=-0.003920 max=0.005531 Jy/beam
! Clean residual mean=-0.000001 rms=0.001025 Jy/beam
! Combined flux in latest and established models = 0.153382 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 45 components and 0.153382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072301Jy  sigma=1.232175
! Fit after  self-cal, rms=0.072288Jy  sigma=1.231256
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8671 x 2.536 at 1.261 degrees (North through East)
! Clean map  min=-0.0036355  max=0.10657 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.05     HN        1.19     KP        0.94     
!   LA        0.99     MK        1.11     NL        1.03     OV        0.87     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.21     FD        1.02     HN        1.01     KP        0.95     
!   LA        0.97     MK        0.95     NL        1.09     OV        0.93     
!   PT        0.89     SC        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.01     HN        1.24     KP        0.97     
!   LA        1.01     MK        0.97     NL        1.08     OV        0.88     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.04     HN        1.03     KP        0.98     
!   LA        0.97     MK        1.00     NL        1.10     OV        0.95     
!   PT        0.90     SC        0.92     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.00     HN        1.07     KP        0.95     
!   LA        0.99     MK        1.02     NL        1.11     OV        0.89     
!   PT        0.95     SC        0.90     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.00     HN        1.10     KP        0.95     
!   LA        0.96     MK        1.01     NL        1.09     OV        0.91     
!   PT        0.91     SC        0.91     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.98     HN        1.08     KP        0.99     
!   LA        1.00     MK        1.14     NL        1.12     OV        0.91     
!   PT        0.96     SC        0.87     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.02     HN        1.18     KP        0.93     
!   LA        1.04     MK        1.01     NL        1.12     OV        0.88     
!   PT        0.94     SC        0.92     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.96     HN        1.07     KP        0.97     
!   LA        0.96     MK        1.04     NL        1.17     OV        0.91     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        0.99     HN        1.05     KP        1.01     
!   LA        1.00     MK        0.94     NL        1.15     OV        0.90     
!   PT        0.92     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.05     HN        1.12     KP        0.94     
!   LA        1.00     MK        0.91     NL        1.15     OV        0.90     
!   PT        0.95     SC        0.90     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.95     HN        1.13     KP        1.01     
!   LA        0.97     MK        1.02     NL        1.10     OV        0.91     
!   PT        0.96     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.072288Jy  sigma=1.231256
! Fit after  self-cal, rms=0.074876Jy  sigma=1.207144
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.86 mas, bmaj=2.53 mas, bpa=2.108 degrees
! Estimated noise=0.354873 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00137043 Jy
! Component: 100  -  total flux cleaned = -0.00168883 Jy
! Component: 150  -  total flux cleaned = -0.00181543 Jy
! Component: 200  -  total flux cleaned = -0.00192045 Jy
! Total flux subtracted in 200 components = -0.00192045 Jy
! Clean residual min=-0.002622 max=0.002508 Jy/beam
! Clean residual mean=0.000001 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.151462 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 55 components and 0.151462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074790Jy  sigma=1.205896
! Fit after  self-cal, rms=0.074926Jy  sigma=1.205438
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074926Jy  sigma=1.205438
! Fit after  self-cal, rms=0.077699Jy  sigma=1.198837
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8596 mas, bmaj=2.53 mas, bpa=2.313 degrees
! Estimated noise=0.354111 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00113961 Jy
! Component: 100  -  total flux cleaned = -0.00125951 Jy
! Component: 150  -  total flux cleaned = -0.00128311 Jy
! Component: 200  -  total flux cleaned = -0.00128445 Jy
! Total flux subtracted in 200 components = -0.00128445 Jy
! Clean residual min=-0.002058 max=0.001860 Jy/beam
! Clean residual mean=0.000002 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.150177 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 60 components and 0.150177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077670Jy  sigma=1.198257
! Fit after  self-cal, rms=0.077718Jy  sigma=1.198046
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000431126 Jy
! Component: 100  -  total flux cleaned = -0.000450598 Jy
! Component: 150  -  total flux cleaned = -0.000451324 Jy
! Component: 200  -  total flux cleaned = -0.000465432 Jy
! Total flux subtracted in 200 components = -0.000465432 Jy
! Clean residual min=-0.002035 max=0.001867 Jy/beam
! Clean residual mean=0.000001 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.149712 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 0.149712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077710Jy  sigma=1.197872
! Fit after  self-cal, rms=0.077707Jy  sigma=1.197845
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077707Jy  sigma=1.197845
! Fit after  self-cal, rms=0.078928Jy  sigma=1.197391
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8579 mas, bmaj=2.527 mas, bpa=2.451 degrees
! Estimated noise=0.353237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000888973 Jy
! Component: 100  -  total flux cleaned = -0.000969601 Jy
! Component: 150  -  total flux cleaned = -0.000985038 Jy
! Component: 200  -  total flux cleaned = -0.000972396 Jy
! Total flux subtracted in 200 components = -0.000972396 Jy
! Clean residual min=-0.001984 max=0.001846 Jy/beam
! Clean residual mean=0.000001 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.148739 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 69 components and 0.148739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078913Jy  sigma=1.197119
! Fit after  self-cal, rms=0.078928Jy  sigma=1.197046
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000306126 Jy
! Component: 100  -  total flux cleaned = -0.000294015 Jy
! Component: 150  -  total flux cleaned = -0.0002826 Jy
! Component: 200  -  total flux cleaned = -0.000282496 Jy
! Total flux subtracted in 200 components = -0.000282496 Jy
! Clean residual min=-0.001966 max=0.001849 Jy/beam
! Clean residual mean=0.000001 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.148457 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 72 components and 0.148457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078925Jy  sigma=1.196957
! Fit after  self-cal, rms=0.078923Jy  sigma=1.196946
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078923Jy  sigma=1.196946
! Fit after  self-cal, rms=0.079248Jy  sigma=1.196811
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=5.777 mas, bpa=0.1194 degrees
! Estimated noise=0.439029 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000634468 Jy
! Component: 100  -  total flux cleaned = -0.000726342 Jy
! Component: 150  -  total flux cleaned = -0.000745791 Jy
! Component: 200  -  total flux cleaned = -0.000768834 Jy
! Total flux subtracted in 200 components = -0.000768834 Jy
! Clean residual min=-0.002182 max=0.002103 Jy/beam
! Clean residual mean=0.000002 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.147688 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 80 components and 0.147688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079242Jy  sigma=1.196783
! Fit after  self-cal, rms=0.079247Jy  sigma=1.196763
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.37088e-05 Jy
! Component: 100  -  total flux cleaned = -0.000106229 Jy
! Component: 150  -  total flux cleaned = -0.000116001 Jy
! Component: 200  -  total flux cleaned = -0.000120313 Jy
! Total flux subtracted in 200 components = -0.000120313 Jy
! Clean residual min=-0.002173 max=0.002114 Jy/beam
! Clean residual mean=0.000002 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.147568 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 84 components and 0.147568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079247Jy  sigma=1.196772
! Fit after  self-cal, rms=0.079246Jy  sigma=1.196763
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8561 mas, bmaj=2.522 mas, bpa=2.54 degrees
! Estimated noise=0.352404 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8561 x 2.522 at 2.54 degrees (North through East)
! Clean map  min=-0.0018848  max=0.10676 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6588 mas, bmaj=2.021 mas, bpa=3.092 degrees
! Estimated noise=0.583382 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0779462 Jy
! Component: 100  -  total flux cleaned = 0.107118 Jy
! Component: 150  -  total flux cleaned = 0.121295 Jy
! Component: 200  -  total flux cleaned = 0.129495 Jy
! Total flux subtracted in 200 components = 0.129495 Jy
! Clean residual min=-0.003645 max=0.004206 Jy/beam
! Clean residual mean=-0.000012 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.129495 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.129495 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8561 mas, bmaj=2.522 mas, bpa=2.54 degrees
! Estimated noise=0.352404 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0076808 Jy
! Component: 100  -  total flux cleaned = 0.0116951 Jy
! Component: 150  -  total flux cleaned = 0.0139686 Jy
! Component: 200  -  total flux cleaned = 0.0153783 Jy
! Total flux subtracted in 200 components = 0.0153783 Jy
! Clean residual min=-0.002100 max=0.001876 Jy/beam
! Clean residual mean=-0.000002 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.144873 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 40 components and 0.144873 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=5.777 mas, bpa=0.1194 degrees
! Estimated noise=0.439029 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132171 Jy
! Component: 100  -  total flux cleaned = 0.00189917 Jy
! Component: 150  -  total flux cleaned = 0.00216351 Jy
! Component: 200  -  total flux cleaned = 0.00224874 Jy
! Total flux subtracted in 200 components = 0.00224874 Jy
! Clean residual min=-0.002230 max=0.002098 Jy/beam
! Clean residual mean=0.000002 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.147122 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.36534e-05 Jy
! Component: 100  -  total flux cleaned = 2.66496e-05 Jy
! Component: 150  -  total flux cleaned = 3.49554e-05 Jy
! Component: 200  -  total flux cleaned = 4.71119e-05 Jy
! Total flux subtracted in 200 components = 4.71119e-05 Jy
! Clean residual min=-0.002227 max=0.002100 Jy/beam
! Clean residual mean=0.000002 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.147169 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 57 components and 0.147169 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8561 mas, bmaj=2.522 mas, bpa=2.54 degrees
! Estimated noise=0.352404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00029824 Jy
! Component: 100  -  total flux cleaned = -0.000299166 Jy
! Component: 150  -  total flux cleaned = -0.000300142 Jy
! Component: 200  -  total flux cleaned = -0.000284528 Jy
! Total flux subtracted in 200 components = -0.000284528 Jy
! Clean residual min=-0.002006 max=0.001895 Jy/beam
! Clean residual mean=0.000000 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.146884 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 62 components and 0.146884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079262Jy  sigma=1.196785
! Fit after  self-cal, rms=0.079243Jy  sigma=1.196729
wmodel J0524-2818_X_map.mod
! Writing 62 model components to file: J0524-2818_X_map.mod
wobs   J0524-2818_X_uvs.fits
! Writing UV FITS file: J0524-2818_X_uvs.fits
wwins  J0524-2818_X_map.win
! wwins: Wrote 2 windows to J0524-2818_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000418919 Jy
! Component: 100  -  total flux cleaned = -0.000948924 Jy
! Component: 150  -  total flux cleaned = -0.00118421 Jy
! Component: 200  -  total flux cleaned = -0.00132469 Jy
! Component: 250  -  total flux cleaned = -0.00143286 Jy
! Component: 300  -  total flux cleaned = -0.00156421 Jy
! Component: 350  -  total flux cleaned = -0.00166636 Jy
! Component: 400  -  total flux cleaned = -0.00174112 Jy
! Component: 450  -  total flux cleaned = -0.00183824 Jy
! Component: 500  -  total flux cleaned = -0.0018381 Jy
! Component: 550  -  total flux cleaned = -0.00186161 Jy
! Component: 600  -  total flux cleaned = -0.00183909 Jy
! Component: 650  -  total flux cleaned = -0.001839 Jy
! Component: 700  -  total flux cleaned = -0.00179527 Jy
! Component: 750  -  total flux cleaned = -0.00175259 Jy
! Component: 800  -  total flux cleaned = -0.00175298 Jy
! Component: 850  -  total flux cleaned = -0.00173265 Jy
! Component: 900  -  total flux cleaned = -0.00177404 Jy
! Component: 950  -  total flux cleaned = -0.00183458 Jy
! Component: 1000  -  total flux cleaned = -0.0017739 Jy
! Component: 1050  -  total flux cleaned = -0.00171469 Jy
! Component: 1100  -  total flux cleaned = -0.00165638 Jy
! Component: 1150  -  total flux cleaned = -0.00159904 Jy
! Component: 1200  -  total flux cleaned = -0.00156092 Jy
! Component: 1250  -  total flux cleaned = -0.0014858 Jy
! Component: 1300  -  total flux cleaned = -0.0015229 Jy
! Component: 1350  -  total flux cleaned = -0.00139418 Jy
! Component: 1400  -  total flux cleaned = -0.00135804 Jy
! Component: 1450  -  total flux cleaned = -0.00128619 Jy
! Component: 1500  -  total flux cleaned = -0.00126843 Jy
! Component: 1550  -  total flux cleaned = -0.0011451 Jy
! Component: 1600  -  total flux cleaned = -0.00109274 Jy
! Component: 1650  -  total flux cleaned = -0.00102392 Jy
! Component: 1700  -  total flux cleaned = -0.000972746 Jy
! Component: 1750  -  total flux cleaned = -0.00090527 Jy
! Component: 1800  -  total flux cleaned = -0.000905117 Jy
! Component: 1850  -  total flux cleaned = -0.000855083 Jy
! Component: 1900  -  total flux cleaned = -0.00082224 Jy
! Component: 1950  -  total flux cleaned = -0.000740731 Jy
! Component: 2000  -  total flux cleaned = -0.000789331 Jy
! Component: 2050  -  total flux cleaned = -0.000660797 Jy
! Component: 2100  -  total flux cleaned = -0.000724586 Jy
! Component: 2150  -  total flux cleaned = -0.000677163 Jy
! Component: 2200  -  total flux cleaned = -0.00064557 Jy
! Component: 2250  -  total flux cleaned = -0.000583297 Jy
! Component: 2300  -  total flux cleaned = -0.000552186 Jy
! Component: 2350  -  total flux cleaned = -0.000521693 Jy
! Component: 2400  -  total flux cleaned = -0.000415267 Jy
! Component: 2450  -  total flux cleaned = -0.000415048 Jy
! Component: 2500  -  total flux cleaned = -0.00035502 Jy
! Component: 2550  -  total flux cleaned = -0.000340049 Jy
! Component: 2600  -  total flux cleaned = -0.000251587 Jy
! Component: 2650  -  total flux cleaned = -0.00020767 Jy
! Component: 2700  -  total flux cleaned = -0.000207747 Jy
! Component: 2750  -  total flux cleaned = -0.000193426 Jy
! Component: 2800  -  total flux cleaned = -0.000107525 Jy
! Component: 2850  -  total flux cleaned = -7.92041e-05 Jy
! Component: 2900  -  total flux cleaned = -3.67826e-05 Jy
! Component: 2950  -  total flux cleaned = 4.73632e-05 Jy
! Component: 3000  -  total flux cleaned = 7.52161e-05 Jy
! Component: 3050  -  total flux cleaned = 0.000130494 Jy
! Component: 3100  -  total flux cleaned = 0.000171618 Jy
! Component: 3150  -  total flux cleaned = 0.000226078 Jy
! Component: 3200  -  total flux cleaned = 0.000239531 Jy
! Component: 3250  -  total flux cleaned = 0.000307027 Jy
! Component: 3300  -  total flux cleaned = 0.000266912 Jy
! Component: 3350  -  total flux cleaned = 0.000293593 Jy
! Component: 3400  -  total flux cleaned = 0.000346654 Jy
! Component: 3450  -  total flux cleaned = 0.000425592 Jy
! Component: 3500  -  total flux cleaned = 0.000373218 Jy
! Component: 3550  -  total flux cleaned = 0.000386156 Jy
! Component: 3600  -  total flux cleaned = 0.000399078 Jy
! Component: 3650  -  total flux cleaned = 0.000424737 Jy
! Component: 3700  -  total flux cleaned = 0.000463053 Jy
! Component: 3750  -  total flux cleaned = 0.000450435 Jy
! Component: 3800  -  total flux cleaned = 0.00050076 Jy
! Component: 3850  -  total flux cleaned = 0.000463165 Jy
! Component: 3900  -  total flux cleaned = 0.000488203 Jy
! Component: 3950  -  total flux cleaned = 0.000463354 Jy
! Component: 4000  -  total flux cleaned = 0.000413915 Jy
! Component: 4050  -  total flux cleaned = 0.000401669 Jy
! Total flux subtracted in 4096 components = 0.000438178 Jy
! Clean residual min=-0.000776 max=0.000718 Jy/beam
! Clean residual mean=-0.000001 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.147323 Jy
keep
! Adding 302 model components to the UV plane model.
! The established model now contains 364 components and 0.147323 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0524-2818_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8561 x 2.522 at 2.54 degrees (North through East)
! Clean map  min=-0.0011165  max=0.10692 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0524-2818_X_map.fits
wmodel /vlbi/uf001/uva//J0524-2818_X_map.mod
! Writing 364 model components to file: /vlbi/uf001/uva//J0524-2818_X_map.mod
wobs   /vlbi/uf001/uva//J0524-2818_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0524-2818_X_uvs.fits
wwins  /vlbi/uf001/uva//J0524-2818_X_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0524-2818_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.106923 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000211143 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.592414 0.592414 1.18483 2.36966 4.73932 9.47863 18.9573 37.9145 75.829
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.106 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  506.402 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0524-2818_X_dfm.log closed on Sun Jan 13 22:36:26 2019