! Started logfile: /vlbi/uf001/uva//J0519+0848_S_dfm.log on Sun Jan 13 22:33:49 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0519+0848_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0519+0848_S_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.833862 visibilities/baseline/integration-bin. ! Found source: J0519+0848 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4728 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0519+0848_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.021441Jy sigma=19.929209 ! Fit after self-cal, rms=0.759941Jy sigma=14.798761 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=6.571 mas, bpa=-1.684 degrees ! Estimated noise=0.728951 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186466 Jy ! Component: 100 - total flux cleaned = 0.22883 Jy ! Total flux subtracted in 100 components = 0.22883 Jy ! Clean residual min=-0.010825 max=0.017604 Jy/beam ! Clean residual mean=-0.000015 rms=0.002974 Jy/beam ! Combined flux in latest and established models = 0.22883 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.22883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.082438Jy sigma=1.548675 ! Fit after self-cal, rms=0.082424Jy sigma=1.548524 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=7.267 mas, bpa=-2.07 degrees ! Estimated noise=0.581404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218078 Jy ! Component: 100 - total flux cleaned = 0.0337537 Jy ! Component: 150 - total flux cleaned = 0.0378795 Jy ! Component: 200 - total flux cleaned = 0.0406971 Jy ! Total flux subtracted in 200 components = 0.0406971 Jy ! Clean residual min=-0.008264 max=0.012243 Jy/beam ! Clean residual mean=0.000023 rms=0.002382 Jy/beam ! Combined flux in latest and established models = 0.269527 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 37 components and 0.269527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076820Jy sigma=1.416033 ! Fit after self-cal, rms=0.076743Jy sigma=1.414264 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.255 x 7.267 at -2.07 degrees (North through East) ! Clean map min=-0.0079358 max=0.23921 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.25 HN 0.99 KP 1.03 ! LA 0.93 MK 1.04 NL 1.03 OV 0.96 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.30 HN 0.97 KP 1.00 ! LA 0.96 MK 1.01 NL 1.03 OV 0.83 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.31 HN 0.98 KP 1.01 ! LA 0.93 MK 1.04 NL 1.01 OV 0.93 ! PT 0.98 SC 0.99 ! ! ! Fit before self-cal, rms=0.076743Jy sigma=1.414264 ! Fit after self-cal, rms=0.076419Jy sigma=1.319142 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=7.361 mas, bpa=-1.903 degrees ! Estimated noise=0.581068 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00189137 Jy ! Component: 100 - total flux cleaned = -0.00230815 Jy ! Component: 150 - total flux cleaned = -0.00258349 Jy ! Component: 200 - total flux cleaned = -0.00290343 Jy ! Total flux subtracted in 200 components = -0.00290343 Jy ! Clean residual min=-0.007343 max=0.007051 Jy/beam ! Clean residual mean=0.000012 rms=0.001835 Jy/beam ! Combined flux in latest and established models = 0.266624 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 58 components and 0.266624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076049Jy sigma=1.315851 ! Fit after self-cal, rms=0.076116Jy sigma=1.315215 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076116Jy sigma=1.315215 ! Fit after self-cal, rms=0.078216Jy sigma=1.299928 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=7.372 mas, bpa=-2.039 degrees ! Estimated noise=0.581646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101391 Jy ! Component: 100 - total flux cleaned = -0.000831665 Jy ! Component: 150 - total flux cleaned = -0.000591482 Jy ! Component: 200 - total flux cleaned = -0.000385683 Jy ! Total flux subtracted in 200 components = -0.000385683 Jy ! Clean residual min=-0.006536 max=0.006933 Jy/beam ! Clean residual mean=-0.000000 rms=0.001734 Jy/beam ! Combined flux in latest and established models = 0.266238 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.266238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077843Jy sigma=1.297426 ! Fit after self-cal, rms=0.077842Jy sigma=1.297250 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.74243e-05 Jy ! Component: 100 - total flux cleaned = -3.84974e-05 Jy ! Component: 150 - total flux cleaned = -0.00013432 Jy ! Component: 200 - total flux cleaned = -0.000179156 Jy ! Total flux subtracted in 200 components = -0.000179156 Jy ! Clean residual min=-0.006459 max=0.007039 Jy/beam ! Clean residual mean=-0.000000 rms=0.001730 Jy/beam ! Combined flux in latest and established models = 0.266059 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 80 components and 0.266059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077720Jy sigma=1.296756 ! Fit after self-cal, rms=0.077717Jy sigma=1.296724 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077717Jy sigma=1.296724 ! Fit after self-cal, rms=0.069565Jy sigma=1.191747 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=7.363 mas, bpa=-2.054 degrees ! Estimated noise=0.580321 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010293 Jy ! Component: 100 - total flux cleaned = -0.000988878 Jy ! Component: 150 - total flux cleaned = -0.000987456 Jy ! Component: 200 - total flux cleaned = -0.000988873 Jy ! Total flux subtracted in 200 components = -0.000988873 Jy ! Clean residual min=-0.003045 max=0.003645 Jy/beam ! Clean residual mean=0.000001 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.26507 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.26507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069507Jy sigma=1.190953 ! Fit after self-cal, rms=0.069541Jy sigma=1.190712 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339417 Jy ! Component: 100 - total flux cleaned = 0.00530634 Jy ! Component: 150 - total flux cleaned = 0.00650075 Jy ! Component: 200 - total flux cleaned = 0.00717745 Jy ! Total flux subtracted in 200 components = 0.00717745 Jy ! Clean residual min=-0.002978 max=0.002627 Jy/beam ! Clean residual mean=0.000008 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.272248 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 119 components and 0.272248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069334Jy sigma=1.186825 ! Fit after self-cal, rms=0.069327Jy sigma=1.186682 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069327Jy sigma=1.186682 ! Fit after self-cal, rms=0.069341Jy sigma=1.186302 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.094 mas, bmaj=11.37 mas, bpa=-4.119 degrees ! Estimated noise=0.746096 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148532 Jy ! Component: 100 - total flux cleaned = 0.00231717 Jy ! Component: 150 - total flux cleaned = 0.00281872 Jy ! Component: 200 - total flux cleaned = 0.00304203 Jy ! Total flux subtracted in 200 components = 0.00304203 Jy ! Clean residual min=-0.003405 max=0.003498 Jy/beam ! Clean residual mean=0.000021 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.27529 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 134 components and 0.27529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069298Jy sigma=1.185637 ! Fit after self-cal, rms=0.069291Jy sigma=1.185495 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161365 Jy ! Component: 100 - total flux cleaned = 0.000404964 Jy ! Component: 150 - total flux cleaned = 0.000654107 Jy ! Component: 200 - total flux cleaned = 0.000852622 Jy ! Total flux subtracted in 200 components = 0.000852622 Jy ! Clean residual min=-0.003392 max=0.003333 Jy/beam ! Clean residual mean=0.000023 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.276142 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 145 components and 0.276142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069273Jy sigma=1.185303 ! Fit after self-cal, rms=0.069269Jy sigma=1.185250 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=7.371 mas, bpa=-2.087 degrees ! Estimated noise=0.578912 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.269 x 7.371 at -2.087 degrees (North through East) ! Clean map min=-0.002678 max=0.24093 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.801 mas, bmaj=6.674 mas, bpa=-1.864 degrees ! Estimated noise=0.732914 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.187441 Jy ! Component: 100 - total flux cleaned = 0.22886 Jy ! Component: 150 - total flux cleaned = 0.243608 Jy ! Component: 200 - total flux cleaned = 0.251335 Jy ! Total flux subtracted in 200 components = 0.251335 Jy ! Clean residual min=-0.004029 max=0.004039 Jy/beam ! Clean residual mean=-0.000013 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.251336 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.251336 Jy ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=7.371 mas, bpa=-2.087 degrees ! Estimated noise=0.578912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00567722 Jy ! Component: 100 - total flux cleaned = 0.00956276 Jy ! Component: 150 - total flux cleaned = 0.0125572 Jy ! Component: 200 - total flux cleaned = 0.0149795 Jy ! Total flux subtracted in 200 components = 0.0149795 Jy ! Clean residual min=-0.003119 max=0.002751 Jy/beam ! Clean residual mean=0.000001 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.266315 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 58 components and 0.266315 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.094 mas, bmaj=11.37 mas, bpa=-4.119 degrees ! Estimated noise=0.746096 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032796 Jy ! Component: 100 - total flux cleaned = 0.00553603 Jy ! Component: 150 - total flux cleaned = 0.00678976 Jy ! Component: 200 - total flux cleaned = 0.00780373 Jy ! Total flux subtracted in 200 components = 0.00780373 Jy ! Clean residual min=-0.003351 max=0.003478 Jy/beam ! Clean residual mean=0.000018 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.274119 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000599162 Jy ! Component: 100 - total flux cleaned = 0.000906058 Jy ! Component: 150 - total flux cleaned = 0.00110649 Jy ! Component: 200 - total flux cleaned = 0.00136553 Jy ! Total flux subtracted in 200 components = 0.00136553 Jy ! Clean residual min=-0.003266 max=0.003330 Jy/beam ! Clean residual mean=0.000021 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.275484 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 107 components and 0.275484 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=7.371 mas, bpa=-2.087 degrees ! Estimated noise=0.578912 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292687 Jy ! Component: 100 - total flux cleaned = 0.000198204 Jy ! Component: 150 - total flux cleaned = 7.18708e-05 Jy ! Component: 200 - total flux cleaned = 7.11455e-05 Jy ! Total flux subtracted in 200 components = 7.11455e-05 Jy ! Clean residual min=-0.002675 max=0.002377 Jy/beam ! Clean residual mean=0.000010 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.275555 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 127 components and 0.275555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069293Jy sigma=1.185507 ! Fit after self-cal, rms=0.069290Jy sigma=1.185345 wmodel J0519+0848_S_map.mod ! Writing 127 model components to file: J0519+0848_S_map.mod wobs J0519+0848_S_uvs.fits ! Writing UV FITS file: J0519+0848_S_uvs.fits wwins J0519+0848_S_map.win ! wwins: Wrote 3 windows to J0519+0848_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011916 Jy ! Component: 100 - total flux cleaned = -0.00146052 Jy ! Component: 150 - total flux cleaned = -0.00137867 Jy ! Component: 200 - total flux cleaned = -0.00129828 Jy ! Component: 250 - total flux cleaned = -0.00137527 Jy ! Component: 300 - total flux cleaned = -0.00152497 Jy ! Component: 350 - total flux cleaned = -0.00156098 Jy ! Component: 400 - total flux cleaned = -0.00148856 Jy ! Component: 450 - total flux cleaned = -0.00145352 Jy ! Component: 500 - total flux cleaned = -0.00145323 Jy ! Component: 550 - total flux cleaned = -0.00145339 Jy ! Component: 600 - total flux cleaned = -0.00145352 Jy ! Component: 650 - total flux cleaned = -0.00151892 Jy ! Component: 700 - total flux cleaned = -0.00167793 Jy ! Component: 750 - total flux cleaned = -0.0016783 Jy ! Component: 800 - total flux cleaned = -0.00170925 Jy ! Component: 850 - total flux cleaned = -0.00158833 Jy ! Component: 900 - total flux cleaned = -0.00158874 Jy ! Component: 950 - total flux cleaned = -0.00152942 Jy ! Component: 1000 - total flux cleaned = -0.00147075 Jy ! Component: 1050 - total flux cleaned = -0.00144174 Jy ! Component: 1100 - total flux cleaned = -0.00138514 Jy ! Component: 1150 - total flux cleaned = -0.00127464 Jy ! Component: 1200 - total flux cleaned = -0.00138408 Jy ! Component: 1250 - total flux cleaned = -0.00132948 Jy ! Component: 1300 - total flux cleaned = -0.0013826 Jy ! Component: 1350 - total flux cleaned = -0.00127713 Jy ! Component: 1400 - total flux cleaned = -0.00127752 Jy ! Component: 1450 - total flux cleaned = -0.00130321 Jy ! Component: 1500 - total flux cleaned = -0.00127744 Jy ! Component: 1550 - total flux cleaned = -0.00122765 Jy ! Component: 1600 - total flux cleaned = -0.00127678 Jy ! Component: 1650 - total flux cleaned = -0.00122746 Jy ! Component: 1700 - total flux cleaned = -0.00110682 Jy ! Component: 1750 - total flux cleaned = -0.00120277 Jy ! Component: 1800 - total flux cleaned = -0.00117915 Jy ! Component: 1850 - total flux cleaned = -0.00120242 Jy ! Component: 1900 - total flux cleaned = -0.0011794 Jy ! Component: 1950 - total flux cleaned = -0.00120229 Jy ! Component: 2000 - total flux cleaned = -0.00120242 Jy ! Component: 2050 - total flux cleaned = -0.00118025 Jy ! Component: 2100 - total flux cleaned = -0.00122473 Jy ! Component: 2150 - total flux cleaned = -0.00120284 Jy ! Component: 2200 - total flux cleaned = -0.00124643 Jy ! Component: 2250 - total flux cleaned = -0.00124611 Jy ! Component: 2300 - total flux cleaned = -0.00122471 Jy ! Component: 2350 - total flux cleaned = -0.00120358 Jy ! Component: 2400 - total flux cleaned = -0.00118248 Jy ! Component: 2450 - total flux cleaned = -0.00118229 Jy ! Component: 2500 - total flux cleaned = -0.00114132 Jy ! Component: 2550 - total flux cleaned = -0.00105992 Jy ! Component: 2600 - total flux cleaned = -0.00108018 Jy ! Component: 2650 - total flux cleaned = -0.00111989 Jy ! Component: 2700 - total flux cleaned = -0.00109991 Jy ! Component: 2750 - total flux cleaned = -0.00096247 Jy ! Component: 2800 - total flux cleaned = -0.000865716 Jy ! Component: 2850 - total flux cleaned = -0.00084656 Jy ! Component: 2900 - total flux cleaned = -0.000846516 Jy ! Component: 2950 - total flux cleaned = -0.000751859 Jy ! Component: 3000 - total flux cleaned = -0.000695673 Jy ! Component: 3050 - total flux cleaned = -0.000639904 Jy ! Component: 3100 - total flux cleaned = -0.000566235 Jy ! Component: 3150 - total flux cleaned = -0.000529505 Jy ! Component: 3200 - total flux cleaned = -0.000402603 Jy ! Component: 3250 - total flux cleaned = -0.000438739 Jy ! Component: 3300 - total flux cleaned = -0.00036722 Jy ! Component: 3350 - total flux cleaned = -0.000349522 Jy ! Component: 3400 - total flux cleaned = -0.000296645 Jy ! Component: 3450 - total flux cleaned = -0.000296519 Jy ! Component: 3500 - total flux cleaned = -0.000158121 Jy ! Component: 3550 - total flux cleaned = -8.97384e-05 Jy ! Component: 3600 - total flux cleaned = -8.96696e-05 Jy ! Component: 3650 - total flux cleaned = -2.20632e-05 Jy ! Component: 3700 - total flux cleaned = 6.17835e-05 Jy ! Component: 3750 - total flux cleaned = 9.51914e-05 Jy ! Component: 3800 - total flux cleaned = 0.000177849 Jy ! Component: 3850 - total flux cleaned = 0.000177919 Jy ! Component: 3900 - total flux cleaned = 0.000194178 Jy ! Component: 3950 - total flux cleaned = 0.000161898 Jy ! Component: 4000 - total flux cleaned = 0.000226168 Jy ! Component: 4050 - total flux cleaned = 0.000210325 Jy ! Total flux subtracted in 4096 components = 0.000194502 Jy ! Clean residual min=-0.000859 max=0.001039 Jy/beam ! Clean residual mean=0.000003 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.27575 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 410 components and 0.27575 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0519+0848_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.269 x 7.371 at -2.087 degrees (North through East) ! Clean map min=-0.0022254 max=0.24229 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0519+0848_S_map.fits wmodel /vlbi/uf001/uva//J0519+0848_S_map.mod ! Writing 410 model components to file: /vlbi/uf001/uva//J0519+0848_S_map.mod wobs /vlbi/uf001/uva//J0519+0848_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0519+0848_S_uvs.fits wwins /vlbi/uf001/uva//J0519+0848_S_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0519+0848_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.242289 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000293197 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.363034 0.363034 0.726068 1.45214 2.90427 5.80854 11.6171 23.2342 46.4683 92.9367 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.242 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 826.369 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0519+0848_S_dfm.log closed on Sun Jan 13 22:33:53 2019