! Started logfile: /vlbi/uf001/uva//J0517+0648_X_dfm.log on Sun Jan 13 22:32:30 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0517+0648_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0517+0648_X_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.846032 visibilities/baseline/integration-bin. ! Found source: J0517+0648 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 19188 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0517+0648_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.010069Jy sigma=22.559103 ! Fit after self-cal, rms=0.888669Jy sigma=19.813572 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6981 mas, bmaj=1.624 mas, bpa=-2.05 degrees ! Estimated noise=0.397357 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0701871 Jy ! Component: 100 - total flux cleaned = 0.101434 Jy ! Total flux subtracted in 100 components = 0.101434 Jy ! Clean residual min=-0.011601 max=0.044556 Jy/beam ! Clean residual mean=0.000003 rms=0.003233 Jy/beam ! Combined flux in latest and established models = 0.101434 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.101434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110010Jy sigma=2.398751 ! Fit after self-cal, rms=0.108576Jy sigma=2.365735 ! Inverting map ! Added new window around map position (-1.4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0390766 Jy ! Component: 100 - total flux cleaned = 0.0622222 Jy ! Total flux subtracted in 100 components = 0.0622222 Jy ! Clean residual min=-0.009056 max=0.019738 Jy/beam ! Clean residual mean=0.000002 rms=0.002115 Jy/beam ! Combined flux in latest and established models = 0.163657 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.163657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084150Jy sigma=1.804235 ! Fit after self-cal, rms=0.082215Jy sigma=1.761557 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214492 Jy ! Component: 100 - total flux cleaned = 0.0359837 Jy ! Total flux subtracted in 100 components = 0.0359837 Jy ! Clean residual min=-0.007061 max=0.012775 Jy/beam ! Clean residual mean=0.000002 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 0.19964 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 30 components and 0.19964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071611Jy sigma=1.516127 ! Fit after self-cal, rms=0.070759Jy sigma=1.497770 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137094 Jy ! Component: 100 - total flux cleaned = 0.0231332 Jy ! Total flux subtracted in 100 components = 0.0231332 Jy ! Clean residual min=-0.005646 max=0.008033 Jy/beam ! Clean residual mean=0.000002 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.222773 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.222773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065722Jy sigma=1.378162 ! Fit after self-cal, rms=0.065361Jy sigma=1.370134 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00881535 Jy ! Component: 100 - total flux cleaned = 0.0149396 Jy ! Total flux subtracted in 100 components = 0.0149396 Jy ! Clean residual min=-0.004914 max=0.005606 Jy/beam ! Clean residual mean=0.000002 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.237713 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.237713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063070Jy sigma=1.314982 ! Fit after self-cal, rms=0.062903Jy sigma=1.311196 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8656 mas, bmaj=1.913 mas, bpa=-1.992 degrees ! Estimated noise=0.252077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101282 Jy ! Component: 100 - total flux cleaned = 0.0165532 Jy ! Component: 150 - total flux cleaned = 0.0210937 Jy ! Component: 200 - total flux cleaned = 0.0244335 Jy ! Total flux subtracted in 200 components = 0.0244335 Jy ! Clean residual min=-0.004739 max=0.007030 Jy/beam ! Clean residual mean=0.000003 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.262146 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 61 components and 0.262146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061062Jy sigma=1.264607 ! Fit after self-cal, rms=0.060908Jy sigma=1.261165 ! Inverting map ! Added new window around map position (-9.8, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00651485 Jy ! Component: 100 - total flux cleaned = 0.0104435 Jy ! Component: 150 - total flux cleaned = 0.0134544 Jy ! Component: 200 - total flux cleaned = 0.0155818 Jy ! Total flux subtracted in 200 components = 0.0155818 Jy ! Clean residual min=-0.003933 max=0.005124 Jy/beam ! Clean residual mean=0.000002 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.277728 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 91 components and 0.277728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060086Jy sigma=1.241456 ! Fit after self-cal, rms=0.059989Jy sigma=1.239057 ! Inverting map ! Added new window around map position (1.4, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445037 Jy ! Component: 100 - total flux cleaned = 0.00730252 Jy ! Component: 150 - total flux cleaned = 0.00917706 Jy ! Component: 200 - total flux cleaned = 0.0107356 Jy ! Total flux subtracted in 200 components = 0.0107356 Jy ! Clean residual min=-0.003357 max=0.003888 Jy/beam ! Clean residual mean=0.000001 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.288464 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 112 components and 0.288464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059563Jy sigma=1.227983 ! Fit after self-cal, rms=0.059534Jy sigma=1.227475 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8656 x 1.913 at -1.992 degrees (North through East) ! Clean map min=-0.0031469 max=0.10073 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.95 KP 1.00 ! LA 1.01 MK 1.01 NL 1.09 OV 0.93 ! PT 0.95 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 0.99 KP 1.02 ! LA 1.01 MK 1.01 NL 1.08 OV 0.92 ! PT 0.96 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.00 KP 1.00 ! LA 1.02 MK 1.01 NL 1.09 OV 0.94 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.00 KP 1.00 ! LA 1.01 MK 0.99 NL 1.07 OV 0.94 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.97 KP 1.02 ! LA 1.01 MK 1.02 NL 1.07 OV 0.94 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 0.98 KP 0.99 ! LA 1.01 MK 0.98 NL 1.09 OV 0.94 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.03 KP 1.01 ! LA 1.02 MK 0.96 NL 1.06 OV 0.94 ! PT 0.96 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 0.99 KP 1.03 ! LA 1.03 MK 0.98 NL 1.08 OV 0.93 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 1.01 KP 1.01 ! LA 1.03 MK 0.96 NL 1.09 OV 0.96 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.01 KP 1.03 ! LA 1.04 MK 0.99 NL 1.09 OV 0.93 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 1.06 KP 1.01 ! LA 1.04 MK 0.99 NL 1.05 OV 0.92 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.08 HN 0.98 KP 1.01 ! LA 1.03 MK 0.99 NL 1.13 OV 0.92 ! PT 0.96 SC 0.99 ! ! ! Fit before self-cal, rms=0.059534Jy sigma=1.227475 ! Fit after self-cal, rms=0.058761Jy sigma=1.209411 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8618 mas, bmaj=1.916 mas, bpa=-1.825 degrees ! Estimated noise=0.252464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000300283 Jy ! Component: 100 - total flux cleaned = -0.00042494 Jy ! Component: 150 - total flux cleaned = -0.000477066 Jy ! Component: 200 - total flux cleaned = -0.000568027 Jy ! Total flux subtracted in 200 components = -0.000568027 Jy ! Clean residual min=-0.001925 max=0.002144 Jy/beam ! Clean residual mean=0.000000 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.287896 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 136 components and 0.287896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058659Jy sigma=1.207154 ! Fit after self-cal, rms=0.058674Jy sigma=1.206832 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058674Jy sigma=1.206832 ! Fit after self-cal, rms=0.058882Jy sigma=1.203165 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8598 mas, bmaj=1.906 mas, bpa=-1.539 degrees ! Estimated noise=0.252168 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000427575 Jy ! Component: 100 - total flux cleaned = -0.000520836 Jy ! Component: 150 - total flux cleaned = -0.000643389 Jy ! Component: 200 - total flux cleaned = -0.000865888 Jy ! Total flux subtracted in 200 components = -0.000865888 Jy ! Clean residual min=-0.001697 max=0.001823 Jy/beam ! Clean residual mean=0.000000 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.28703 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 146 components and 0.28703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058820Jy sigma=1.201795 ! Fit after self-cal, rms=0.058821Jy sigma=1.201654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.75434e-05 Jy ! Component: 100 - total flux cleaned = -0.000108224 Jy ! Component: 150 - total flux cleaned = -0.00032512 Jy ! Component: 200 - total flux cleaned = -0.000438809 Jy ! Total flux subtracted in 200 components = -0.000438809 Jy ! Clean residual min=-0.001647 max=0.001814 Jy/beam ! Clean residual mean=0.000000 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.286591 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 153 components and 0.286591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058785Jy sigma=1.200879 ! Fit after self-cal, rms=0.058781Jy sigma=1.200787 ! Inverting map ! Added new window around map position (14, 15.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145465 Jy ! Component: 100 - total flux cleaned = 0.00170239 Jy ! Component: 150 - total flux cleaned = 0.00180787 Jy ! Component: 200 - total flux cleaned = 0.00190333 Jy ! Total flux subtracted in 200 components = 0.00190333 Jy ! Clean residual min=-0.001567 max=0.001788 Jy/beam ! Clean residual mean=0.000000 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.288494 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 169 components and 0.288494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058717Jy sigma=1.199437 ! Fit after self-cal, rms=0.058715Jy sigma=1.199351 ! Inverting map ! Added new window around map position (24, 21.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112158 Jy ! Component: 100 - total flux cleaned = 0.0013667 Jy ! Component: 150 - total flux cleaned = 0.0015015 Jy ! Component: 200 - total flux cleaned = 0.00153298 Jy ! Total flux subtracted in 200 components = 0.00153298 Jy ! Clean residual min=-0.001518 max=0.001596 Jy/beam ! Clean residual mean=0.000001 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.290027 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 182 components and 0.290027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058655Jy sigma=1.198103 ! Fit after self-cal, rms=0.058654Jy sigma=1.198003 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058654Jy sigma=1.198003 ! Fit after self-cal, rms=0.058560Jy sigma=1.195407 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8611 mas, bmaj=1.906 mas, bpa=-1.401 degrees ! Estimated noise=0.252185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.17984e-05 Jy ! Component: 100 - total flux cleaned = 3.92083e-05 Jy ! Component: 150 - total flux cleaned = 3.84089e-05 Jy ! Component: 200 - total flux cleaned = -4.18994e-05 Jy ! Total flux subtracted in 200 components = -4.18994e-05 Jy ! Clean residual min=-0.001346 max=0.001461 Jy/beam ! Clean residual mean=0.000000 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.289985 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 193 components and 0.289985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058530Jy sigma=1.194808 ! Fit after self-cal, rms=0.058532Jy sigma=1.194756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.11963e-05 Jy ! Component: 100 - total flux cleaned = 6.23652e-05 Jy ! Component: 150 - total flux cleaned = 1.3529e-05 Jy ! Component: 200 - total flux cleaned = -3.40536e-05 Jy ! Total flux subtracted in 200 components = -3.40536e-05 Jy ! Clean residual min=-0.001319 max=0.001447 Jy/beam ! Clean residual mean=0.000001 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.289951 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 202 components and 0.289951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058512Jy sigma=1.194351 ! Fit after self-cal, rms=0.058511Jy sigma=1.194335 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058511Jy sigma=1.194335 ! Fit after self-cal, rms=0.058507Jy sigma=1.194290 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.057 mas, bmaj=3.051 mas, bpa=-0.5674 degrees ! Estimated noise=0.331404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000200163 Jy ! Component: 100 - total flux cleaned = -0.000264825 Jy ! Component: 150 - total flux cleaned = -0.000335917 Jy ! Component: 200 - total flux cleaned = -0.000468089 Jy ! Total flux subtracted in 200 components = -0.000468089 Jy ! Clean residual min=-0.001735 max=0.001933 Jy/beam ! Clean residual mean=0.000001 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.289483 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 215 components and 0.289483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058501Jy sigma=1.194087 ! Fit after self-cal, rms=0.058498Jy sigma=1.194044 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.95017e-05 Jy ! Component: 100 - total flux cleaned = 6.80614e-05 Jy ! Component: 150 - total flux cleaned = -6.55666e-06 Jy ! Component: 200 - total flux cleaned = -2.38699e-05 Jy ! Total flux subtracted in 200 components = -2.38699e-05 Jy ! Clean residual min=-0.001672 max=0.001905 Jy/beam ! Clean residual mean=0.000001 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.289459 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 223 components and 0.289459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058496Jy sigma=1.193988 ! Fit after self-cal, rms=0.058494Jy sigma=1.193969 ! Inverting map ! Added new window around map position (-22.2, 4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000669549 Jy ! Component: 100 - total flux cleaned = 0.0010543 Jy ! Component: 150 - total flux cleaned = 0.00121148 Jy ! Component: 200 - total flux cleaned = 0.00137093 Jy ! Total flux subtracted in 200 components = 0.00137093 Jy ! Clean residual min=-0.001451 max=0.001416 Jy/beam ! Clean residual mean=0.000001 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.29083 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 254 components and 0.29083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058453Jy sigma=1.193097 ! Fit after self-cal, rms=0.058450Jy sigma=1.193013 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8614 mas, bmaj=1.906 mas, bpa=-1.338 degrees ! Estimated noise=0.252242 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8614 x 1.906 at -1.338 degrees (North through East) ! Clean map min=-0.0012042 max=0.09954 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6944 mas, bmaj=1.616 mas, bpa=-1.339 degrees ! Estimated noise=0.396155 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0773659 Jy ! Component: 100 - total flux cleaned = 0.12176 Jy ! Component: 150 - total flux cleaned = 0.153322 Jy ! Component: 200 - total flux cleaned = 0.176401 Jy ! Total flux subtracted in 200 components = 0.176401 Jy ! Clean residual min=-0.005874 max=0.013132 Jy/beam ! Clean residual mean=0.000002 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.176401 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.176401 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8614 mas, bmaj=1.906 mas, bpa=-1.338 degrees ! Estimated noise=0.252242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0304501 Jy ! Component: 100 - total flux cleaned = 0.04899 Jy ! Component: 150 - total flux cleaned = 0.0612813 Jy ! Component: 200 - total flux cleaned = 0.0701326 Jy ! Total flux subtracted in 200 components = 0.0701326 Jy ! Clean residual min=-0.003407 max=0.005534 Jy/beam ! Clean residual mean=0.000003 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.246534 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 55 components and 0.246534 Jy ! Inverting map ! Added new window around map position (-2.4, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.006773 Jy ! Component: 100 - total flux cleaned = 0.0119916 Jy ! Component: 150 - total flux cleaned = 0.0161252 Jy ! Component: 200 - total flux cleaned = 0.0195066 Jy ! Total flux subtracted in 200 components = 0.0195066 Jy ! Clean residual min=-0.002295 max=0.002638 Jy/beam ! Clean residual mean=0.000002 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.26604 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 81 components and 0.26604 Jy ! Inverting map ! Added new window around map position (1, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309582 Jy ! Component: 100 - total flux cleaned = 0.00566223 Jy ! Component: 150 - total flux cleaned = 0.00781072 Jy ! Component: 200 - total flux cleaned = 0.00955587 Jy ! Total flux subtracted in 200 components = 0.00955587 Jy ! Clean residual min=-0.001946 max=0.001842 Jy/beam ! Clean residual mean=0.000001 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.275596 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 107 components and 0.275596 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.057 mas, bmaj=3.051 mas, bpa=-0.5674 degrees ! Estimated noise=0.331404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002767 Jy ! Component: 100 - total flux cleaned = 0.00432139 Jy ! Component: 150 - total flux cleaned = 0.00573355 Jy ! Component: 200 - total flux cleaned = 0.00695317 Jy ! Total flux subtracted in 200 components = 0.00695317 Jy ! Clean residual min=-0.001796 max=0.001784 Jy/beam ! Clean residual mean=0.000002 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.282549 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102938 Jy ! Component: 100 - total flux cleaned = 0.00199223 Jy ! Component: 150 - total flux cleaned = 0.00256881 Jy ! Component: 200 - total flux cleaned = 0.00316803 Jy ! Total flux subtracted in 200 components = 0.00316803 Jy ! Clean residual min=-0.001609 max=0.001573 Jy/beam ! Clean residual mean=0.000001 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.285717 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 183 components and 0.285717 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8614 mas, bmaj=1.906 mas, bpa=-1.338 degrees ! Estimated noise=0.252242 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000180418 Jy ! Component: 100 - total flux cleaned = 0.000154305 Jy ! Component: 150 - total flux cleaned = 0.000505321 Jy ! Component: 200 - total flux cleaned = 0.000834502 Jy ! Total flux subtracted in 200 components = 0.000834502 Jy ! Clean residual min=-0.001501 max=0.001352 Jy/beam ! Clean residual mean=0.000001 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.286552 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 213 components and 0.286552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058509Jy sigma=1.194300 ! Fit after self-cal, rms=0.058475Jy sigma=1.193481 wmodel J0517+0648_X_map.mod ! Writing 213 model components to file: J0517+0648_X_map.mod wobs J0517+0648_X_uvs.fits ! Writing UV FITS file: J0517+0648_X_uvs.fits wwins J0517+0648_X_map.win ! wwins: Wrote 9 windows to J0517+0648_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129954 Jy ! Component: 100 - total flux cleaned = 3.60147e-05 Jy ! Component: 150 - total flux cleaned = -3.14913e-05 Jy ! Component: 200 - total flux cleaned = -5.36345e-05 Jy ! Component: 250 - total flux cleaned = -7.49766e-05 Jy ! Component: 300 - total flux cleaned = -5.36764e-05 Jy ! Component: 350 - total flux cleaned = 4.81839e-05 Jy ! Component: 400 - total flux cleaned = 2.85475e-05 Jy ! Component: 450 - total flux cleaned = 0.000126868 Jy ! Component: 500 - total flux cleaned = 0.000126807 Jy ! Component: 550 - total flux cleaned = 0.000127232 Jy ! Component: 600 - total flux cleaned = 0.000239781 Jy ! Component: 650 - total flux cleaned = 0.000257775 Jy ! Component: 700 - total flux cleaned = 0.000257763 Jy ! Component: 750 - total flux cleaned = 0.000347686 Jy ! Component: 800 - total flux cleaned = 0.000347461 Jy ! Component: 850 - total flux cleaned = 0.000417935 Jy ! Component: 900 - total flux cleaned = 0.000435256 Jy ! Component: 950 - total flux cleaned = 0.000452548 Jy ! Component: 1000 - total flux cleaned = 0.000436135 Jy ! Component: 1050 - total flux cleaned = 0.000553336 Jy ! Component: 1100 - total flux cleaned = 0.000569588 Jy ! Component: 1150 - total flux cleaned = 0.000618254 Jy ! Component: 1200 - total flux cleaned = 0.000618134 Jy ! Component: 1250 - total flux cleaned = 0.000650454 Jy ! Component: 1300 - total flux cleaned = 0.00072952 Jy ! Component: 1350 - total flux cleaned = 0.000729466 Jy ! Component: 1400 - total flux cleaned = 0.00077624 Jy ! Component: 1450 - total flux cleaned = 0.000760743 Jy ! Component: 1500 - total flux cleaned = 0.000760922 Jy ! Component: 1550 - total flux cleaned = 0.000836455 Jy ! Component: 1600 - total flux cleaned = 0.000791586 Jy ! Component: 1650 - total flux cleaned = 0.000791714 Jy ! Component: 1700 - total flux cleaned = 0.000777158 Jy ! Component: 1750 - total flux cleaned = 0.000792029 Jy ! Component: 1800 - total flux cleaned = 0.000864094 Jy ! Component: 1850 - total flux cleaned = 0.000849573 Jy ! Component: 1900 - total flux cleaned = 0.000864009 Jy ! Component: 1950 - total flux cleaned = 0.000892022 Jy ! Component: 2000 - total flux cleaned = 0.000933856 Jy ! Component: 2050 - total flux cleaned = 0.00103041 Jy ! Component: 2100 - total flux cleaned = 0.00101661 Jy ! Component: 2150 - total flux cleaned = 0.00104382 Jy ! Component: 2200 - total flux cleaned = 0.00104392 Jy ! Component: 2250 - total flux cleaned = 0.00112426 Jy ! Component: 2300 - total flux cleaned = 0.0011775 Jy ! Component: 2350 - total flux cleaned = 0.00124352 Jy ! Component: 2400 - total flux cleaned = 0.00126967 Jy ! Component: 2450 - total flux cleaned = 0.00129577 Jy ! Component: 2500 - total flux cleaned = 0.00132152 Jy ! Component: 2550 - total flux cleaned = 0.00129583 Jy ! Component: 2600 - total flux cleaned = 0.00138485 Jy ! Component: 2650 - total flux cleaned = 0.00135957 Jy ! Component: 2700 - total flux cleaned = 0.00142237 Jy ! Component: 2750 - total flux cleaned = 0.00144728 Jy ! Component: 2800 - total flux cleaned = 0.0014596 Jy ! Component: 2850 - total flux cleaned = 0.00149639 Jy ! Component: 2900 - total flux cleaned = 0.0015331 Jy ! Component: 2950 - total flux cleaned = 0.00154526 Jy ! Component: 3000 - total flux cleaned = 0.00147272 Jy ! Component: 3050 - total flux cleaned = 0.00153281 Jy ! Component: 3100 - total flux cleaned = 0.00156855 Jy ! Component: 3150 - total flux cleaned = 0.00160392 Jy ! Component: 3200 - total flux cleaned = 0.00161565 Jy ! Component: 3250 - total flux cleaned = 0.00165078 Jy ! Component: 3300 - total flux cleaned = 0.00163917 Jy ! Component: 3350 - total flux cleaned = 0.00163906 Jy ! Component: 3400 - total flux cleaned = 0.00163906 Jy ! Component: 3450 - total flux cleaned = 0.00166184 Jy ! Component: 3500 - total flux cleaned = 0.00166177 Jy ! Component: 3550 - total flux cleaned = 0.00162803 Jy ! Component: 3600 - total flux cleaned = 0.00162799 Jy ! Component: 3650 - total flux cleaned = 0.00170577 Jy ! Component: 3700 - total flux cleaned = 0.00169468 Jy ! Component: 3750 - total flux cleaned = 0.00165059 Jy ! Component: 3800 - total flux cleaned = 0.00163967 Jy ! Component: 3850 - total flux cleaned = 0.00167218 Jy ! Component: 3900 - total flux cleaned = 0.00156414 Jy ! Component: 3950 - total flux cleaned = 0.00153187 Jy ! Component: 4000 - total flux cleaned = 0.00156393 Jy ! Component: 4050 - total flux cleaned = 0.00155326 Jy ! Total flux subtracted in 4096 components = 0.00153194 Jy ! Clean residual min=-0.000689 max=0.000654 Jy/beam ! Clean residual mean=0.000000 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.288084 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 535 components and 0.288084 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0517+0648_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8614 x 1.906 at -1.338 degrees (North through East) ! Clean map min=-0.0010434 max=0.099394 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0517+0648_X_map.fits wmodel /vlbi/uf001/uva//J0517+0648_X_map.mod ! Writing 535 model components to file: /vlbi/uf001/uva//J0517+0648_X_map.mod wobs /vlbi/uf001/uva//J0517+0648_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0517+0648_X_uvs.fits wwins /vlbi/uf001/uva//J0517+0648_X_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uva//J0517+0648_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.099394 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000184108 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.555692 0.555692 1.11138 2.22277 4.44553 8.89107 17.7821 35.5643 71.1285 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.099 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 539.867 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0517+0648_X_dfm.log closed on Sun Jan 13 22:32:36 2019