! Started logfile: /vlbi/uf001/uva//J0513+0100_X_dfm.log on Sun Jan 13 22:30:19 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0513+0100_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0513+0100_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.925926 visibilities/baseline/integration-bin. ! Found source: J0513+0100 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 36000 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0513+0100_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004000Jy sigma=22.476854 ! Fit after self-cal, rms=0.932319Jy sigma=20.807515 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6682 mas, bmaj=1.7 mas, bpa=-2.338 degrees ! Estimated noise=0.319805 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440031 Jy ! Component: 100 - total flux cleaned = 0.0625531 Jy ! Total flux subtracted in 100 components = 0.0625531 Jy ! Clean residual min=-0.005755 max=0.015373 Jy/beam ! Clean residual mean=-0.000000 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 0.0625531 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0625531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077354Jy sigma=1.654730 ! Fit after self-cal, rms=0.076567Jy sigma=1.639611 ! Inverting map ! Added new window around map position (-1, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161598 Jy ! Component: 100 - total flux cleaned = 0.025643 Jy ! Total flux subtracted in 100 components = 0.025643 Jy ! Clean residual min=-0.005086 max=0.013577 Jy/beam ! Clean residual mean=-0.000000 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.0881961 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.0881961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070181Jy sigma=1.483365 ! Fit after self-cal, rms=0.069729Jy sigma=1.474144 ! Inverting map ! Added new window around map position (-4.6, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013085 Jy ! Component: 100 - total flux cleaned = 0.0214116 Jy ! Total flux subtracted in 100 components = 0.0214116 Jy ! Clean residual min=-0.003519 max=0.006773 Jy/beam ! Clean residual mean=-0.000001 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.109608 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.109608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065798Jy sigma=1.375338 ! Fit after self-cal, rms=0.065521Jy sigma=1.369181 ! Inverting map ! Added new window around map position (-3.4, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00838078 Jy ! Component: 100 - total flux cleaned = 0.0147178 Jy ! Total flux subtracted in 100 components = 0.0147178 Jy ! Clean residual min=-0.002984 max=0.004072 Jy/beam ! Clean residual mean=-0.000001 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.124325 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 38 components and 0.124325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063354Jy sigma=1.315470 ! Fit after self-cal, rms=0.063283Jy sigma=1.313801 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00588919 Jy ! Component: 100 - total flux cleaned = 0.010643 Jy ! Total flux subtracted in 100 components = 0.010643 Jy ! Clean residual min=-0.002613 max=0.003520 Jy/beam ! Clean residual mean=-0.000001 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.134968 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.134968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062057Jy sigma=1.283419 ! Fit after self-cal, rms=0.062024Jy sigma=1.282644 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8591 mas, bmaj=2.054 mas, bpa=-3.248 degrees ! Estimated noise=0.169432 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00866001 Jy ! Component: 100 - total flux cleaned = 0.0148452 Jy ! Component: 150 - total flux cleaned = 0.0195037 Jy ! Component: 200 - total flux cleaned = 0.0231416 Jy ! Total flux subtracted in 200 components = 0.0231416 Jy ! Clean residual min=-0.003244 max=0.005612 Jy/beam ! Clean residual mean=-0.000003 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.15811 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 68 components and 0.15811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060434Jy sigma=1.243601 ! Fit after self-cal, rms=0.060336Jy sigma=1.241478 ! Inverting map ! Added new window around map position (-2, 6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533888 Jy ! Component: 100 - total flux cleaned = 0.00889597 Jy ! Component: 150 - total flux cleaned = 0.0118073 Jy ! Component: 200 - total flux cleaned = 0.0142848 Jy ! Total flux subtracted in 200 components = 0.0142848 Jy ! Clean residual min=-0.002654 max=0.003059 Jy/beam ! Clean residual mean=-0.000002 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.172395 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 108 components and 0.172395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059729Jy sigma=1.225993 ! Fit after self-cal, rms=0.059694Jy sigma=1.225012 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8591 x 2.054 at -3.248 degrees (North through East) ! Clean map min=-0.0025634 max=0.067364 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 0.92 KP 0.97 ! LA 0.99 MK 1.03 NL 1.08 OV 0.93 ! PT 0.88 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.99 KP 0.98 ! LA 0.98 MK 0.97 NL 1.12 OV 0.92 ! PT 0.89 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.97 KP 0.98 ! LA 0.98 MK 0.98 NL 1.15 OV 0.94 ! PT 0.90 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.94 KP 0.96 ! LA 1.00 MK 0.99 NL 1.09 OV 0.92 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.94 KP 0.99 ! LA 0.97 MK 1.01 NL 1.14 OV 0.94 ! PT 0.90 SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 0.94 KP 0.96 ! LA 0.99 MK 0.97 NL 1.11 OV 0.92 ! PT 0.91 SC 1.05 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.95 KP 0.99 ! LA 0.98 MK 0.93 NL 1.16 OV 0.92 ! PT 0.89 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 0.92 KP 1.02 ! LA 0.98 MK 0.93 NL 1.12 OV 0.92 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.91 KP 0.96 ! LA 0.99 MK 0.94 NL 1.14 OV 0.96 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.95 KP 1.00 ! LA 1.01 MK 1.02 NL 1.14 OV 0.91 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.97 KP 0.99 ! LA 1.01 MK 0.98 NL 1.14 OV 0.92 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.88 KP 0.97 ! LA 0.98 MK 0.98 NL 1.12 OV 0.95 ! PT 0.94 SC 0.95 ! ! ! Fit before self-cal, rms=0.059694Jy sigma=1.225012 ! Fit after self-cal, rms=0.056876Jy sigma=1.212352 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8586 mas, bmaj=2.075 mas, bpa=-3.47 degrees ! Estimated noise=0.165016 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249021 Jy ! Component: 100 - total flux cleaned = 0.00380955 Jy ! Component: 150 - total flux cleaned = 0.00462448 Jy ! Component: 200 - total flux cleaned = 0.00514372 Jy ! Total flux subtracted in 200 components = 0.00514372 Jy ! Clean residual min=-0.000963 max=0.001189 Jy/beam ! Clean residual mean=-0.000000 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.177539 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 136 components and 0.177539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056761Jy sigma=1.208976 ! Fit after self-cal, rms=0.056755Jy sigma=1.208538 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056755Jy sigma=1.208538 ! Fit after self-cal, rms=0.056552Jy sigma=1.206369 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8583 mas, bmaj=2.08 mas, bpa=-3.674 degrees ! Estimated noise=0.16469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358337 Jy ! Component: 100 - total flux cleaned = 0.000741671 Jy ! Component: 150 - total flux cleaned = 0.00104308 Jy ! Component: 200 - total flux cleaned = 0.0012583 Jy ! Total flux subtracted in 200 components = 0.0012583 Jy ! Clean residual min=-0.000816 max=0.001003 Jy/beam ! Clean residual mean=0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.178797 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 151 components and 0.178797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056526Jy sigma=1.205618 ! Fit after self-cal, rms=0.056527Jy sigma=1.205528 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, -49.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000539131 Jy ! Component: 100 - total flux cleaned = 0.00076856 Jy ! Component: 150 - total flux cleaned = 0.000903987 Jy ! Component: 200 - total flux cleaned = 0.00100658 Jy ! Total flux subtracted in 200 components = 0.00100658 Jy ! Clean residual min=-0.000777 max=0.000872 Jy/beam ! Clean residual mean=0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.179803 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 164 components and 0.179804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056506Jy sigma=1.204986 ! Fit after self-cal, rms=0.056503Jy sigma=1.204948 ! Inverting map ! Added new window around map position (-27, 35.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379882 Jy ! Component: 100 - total flux cleaned = 0.000568268 Jy ! Component: 150 - total flux cleaned = 0.000662057 Jy ! Component: 200 - total flux cleaned = 0.000748551 Jy ! Total flux subtracted in 200 components = 0.000748551 Jy ! Clean residual min=-0.000779 max=0.000864 Jy/beam ! Clean residual mean=0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.180552 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 175 components and 0.180552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056485Jy sigma=1.204566 ! Fit after self-cal, rms=0.056484Jy sigma=1.204538 ! Inverting map ! Added new window around map position (18, 42.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000404105 Jy ! Component: 100 - total flux cleaned = 0.000563779 Jy ! Component: 150 - total flux cleaned = 0.00068693 Jy ! Component: 200 - total flux cleaned = 0.000769089 Jy ! Total flux subtracted in 200 components = 0.000769089 Jy ! Clean residual min=-0.000771 max=0.000745 Jy/beam ! Clean residual mean=0.000000 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.181321 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 187 components and 0.181321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056468Jy sigma=1.204197 ! Fit after self-cal, rms=0.056467Jy sigma=1.204172 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056467Jy sigma=1.204172 ! Fit after self-cal, rms=0.056320Jy sigma=1.203461 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8569 mas, bmaj=2.079 mas, bpa=-3.686 degrees ! Estimated noise=0.163968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157952 Jy ! Component: 100 - total flux cleaned = 0.000305751 Jy ! Component: 150 - total flux cleaned = 0.000427774 Jy ! Component: 200 - total flux cleaned = 0.000470936 Jy ! Total flux subtracted in 200 components = 0.000470936 Jy ! Clean residual min=-0.000727 max=0.000749 Jy/beam ! Clean residual mean=0.000000 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.181792 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 201 components and 0.181792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056312Jy sigma=1.203278 ! Fit after self-cal, rms=0.056316Jy sigma=1.203247 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.52128e-05 Jy ! Component: 100 - total flux cleaned = 8.91323e-05 Jy ! Component: 150 - total flux cleaned = 8.91288e-05 Jy ! Component: 200 - total flux cleaned = 8.88124e-05 Jy ! Total flux subtracted in 200 components = 8.88124e-05 Jy ! Clean residual min=-0.000731 max=0.000734 Jy/beam ! Clean residual mean=0.000000 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.181881 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 211 components and 0.181881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056310Jy sigma=1.203120 ! Fit after self-cal, rms=0.056309Jy sigma=1.203113 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056309Jy sigma=1.203113 ! Fit after self-cal, rms=0.056237Jy sigma=1.203107 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.206 mas, bmaj=3.455 mas, bpa=-4.713 degrees ! Estimated noise=0.209469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362473 Jy ! Component: 100 - total flux cleaned = 0.000445357 Jy ! Component: 150 - total flux cleaned = 0.000501366 Jy ! Component: 200 - total flux cleaned = 0.000541406 Jy ! Total flux subtracted in 200 components = 0.000541406 Jy ! Clean residual min=-0.000689 max=0.000692 Jy/beam ! Clean residual mean=0.000000 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.182422 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 219 components and 0.182422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056236Jy sigma=1.203050 ! Fit after self-cal, rms=0.056237Jy sigma=1.203036 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.76503e-05 Jy ! Component: 100 - total flux cleaned = 0.000122204 Jy ! Component: 150 - total flux cleaned = 0.000130751 Jy ! Component: 200 - total flux cleaned = 0.000130874 Jy ! Total flux subtracted in 200 components = 0.000130874 Jy ! Clean residual min=-0.000686 max=0.000700 Jy/beam ! Clean residual mean=0.000000 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.182553 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 226 components and 0.182553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056237Jy sigma=1.203011 ! Fit after self-cal, rms=0.056237Jy sigma=1.203007 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8564 mas, bmaj=2.078 mas, bpa=-3.683 degrees ! Estimated noise=0.163732 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8564 x 2.078 at -3.683 degrees (North through East) ! Clean map min=-0.00063863 max=0.065308 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6662 mas, bmaj=1.716 mas, bpa=-2.857 degrees ! Estimated noise=0.311434 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443093 Jy ! Component: 100 - total flux cleaned = 0.0679866 Jy ! Component: 150 - total flux cleaned = 0.0850032 Jy ! Component: 200 - total flux cleaned = 0.0978119 Jy ! Total flux subtracted in 200 components = 0.0978119 Jy ! Clean residual min=-0.004099 max=0.007626 Jy/beam ! Clean residual mean=-0.000000 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.0978119 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0978119 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8564 mas, bmaj=2.078 mas, bpa=-3.683 degrees ! Estimated noise=0.163732 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172751 Jy ! Component: 100 - total flux cleaned = 0.0295452 Jy ! Component: 150 - total flux cleaned = 0.0387158 Jy ! Component: 200 - total flux cleaned = 0.0458012 Jy ! Total flux subtracted in 200 components = 0.0458012 Jy ! Clean residual min=-0.002737 max=0.004170 Jy/beam ! Clean residual mean=-0.000002 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.143613 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 42 components and 0.143613 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00563613 Jy ! Component: 100 - total flux cleaned = 0.0102194 Jy ! Component: 150 - total flux cleaned = 0.0140199 Jy ! Component: 200 - total flux cleaned = 0.0172036 Jy ! Total flux subtracted in 200 components = 0.0172036 Jy ! Clean residual min=-0.001661 max=0.001969 Jy/beam ! Clean residual mean=-0.000001 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.160817 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 90 components and 0.160817 Jy ! Inverting map ! Added new window around map position (0.8, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269046 Jy ! Component: 100 - total flux cleaned = 0.00498762 Jy ! Component: 150 - total flux cleaned = 0.00696718 Jy ! Component: 200 - total flux cleaned = 0.00868018 Jy ! Total flux subtracted in 200 components = 0.00868018 Jy ! Clean residual min=-0.001186 max=0.001214 Jy/beam ! Clean residual mean=-0.000001 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.169497 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 128 components and 0.169497 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.206 mas, bmaj=3.455 mas, bpa=-4.713 degrees ! Estimated noise=0.209469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279104 Jy ! Component: 100 - total flux cleaned = 0.00482108 Jy ! Component: 150 - total flux cleaned = 0.00636724 Jy ! Component: 200 - total flux cleaned = 0.00759412 Jy ! Total flux subtracted in 200 components = 0.00759412 Jy ! Clean residual min=-0.000927 max=0.000909 Jy/beam ! Clean residual mean=-0.000000 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.177091 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102382 Jy ! Component: 100 - total flux cleaned = 0.00188833 Jy ! Component: 150 - total flux cleaned = 0.00262105 Jy ! Component: 200 - total flux cleaned = 0.0032439 Jy ! Total flux subtracted in 200 components = 0.0032439 Jy ! Clean residual min=-0.000777 max=0.000747 Jy/beam ! Clean residual mean=-0.000000 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.180335 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 207 components and 0.180335 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8564 mas, bmaj=2.078 mas, bpa=-3.683 degrees ! Estimated noise=0.163732 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000603535 Jy ! Component: 100 - total flux cleaned = 0.00091481 Jy ! Component: 150 - total flux cleaned = 0.00102353 Jy ! Component: 200 - total flux cleaned = 0.00107267 Jy ! Total flux subtracted in 200 components = 0.00107267 Jy ! Clean residual min=-0.000814 max=0.000746 Jy/beam ! Clean residual mean=0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.181408 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 228 components and 0.181408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056248Jy sigma=1.203510 ! Fit after self-cal, rms=0.056241Jy sigma=1.203223 wmodel J0513+0100_X_map.mod ! Writing 228 model components to file: J0513+0100_X_map.mod wobs J0513+0100_X_uvs.fits ! Writing UV FITS file: J0513+0100_X_uvs.fits wwins J0513+0100_X_map.win ! wwins: Wrote 9 windows to J0513+0100_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151658 Jy ! Component: 100 - total flux cleaned = -0.000191718 Jy ! Component: 150 - total flux cleaned = -0.000166393 Jy ! Component: 200 - total flux cleaned = -0.000179169 Jy ! Component: 250 - total flux cleaned = -0.000191234 Jy ! Component: 300 - total flux cleaned = -0.000179387 Jy ! Component: 350 - total flux cleaned = -0.000191203 Jy ! Component: 400 - total flux cleaned = -0.000214104 Jy ! Component: 450 - total flux cleaned = -0.000247393 Jy ! Component: 500 - total flux cleaned = -0.000247504 Jy ! Component: 550 - total flux cleaned = -0.000279963 Jy ! Component: 600 - total flux cleaned = -0.000301188 Jy ! Component: 650 - total flux cleaned = -0.000322159 Jy ! Component: 700 - total flux cleaned = -0.000322105 Jy ! Component: 750 - total flux cleaned = -0.000342763 Jy ! Component: 800 - total flux cleaned = -0.000363094 Jy ! Component: 850 - total flux cleaned = -0.000332857 Jy ! Component: 900 - total flux cleaned = -0.000362741 Jy ! Component: 950 - total flux cleaned = -0.000372551 Jy ! Component: 1000 - total flux cleaned = -0.000372607 Jy ! Component: 1050 - total flux cleaned = -0.000420906 Jy ! Component: 1100 - total flux cleaned = -0.000411313 Jy ! Component: 1150 - total flux cleaned = -0.000458455 Jy ! Component: 1200 - total flux cleaned = -0.000449073 Jy ! Component: 1250 - total flux cleaned = -0.000486136 Jy ! Component: 1300 - total flux cleaned = -0.000495254 Jy ! Component: 1350 - total flux cleaned = -0.000495288 Jy ! Component: 1400 - total flux cleaned = -0.000540407 Jy ! Component: 1450 - total flux cleaned = -0.000522377 Jy ! Component: 1500 - total flux cleaned = -0.000548892 Jy ! Component: 1550 - total flux cleaned = -0.000557619 Jy ! Component: 1600 - total flux cleaned = -0.000557648 Jy ! Component: 1650 - total flux cleaned = -0.000618351 Jy ! Component: 1700 - total flux cleaned = -0.000644081 Jy ! Component: 1750 - total flux cleaned = -0.000669773 Jy ! Component: 1800 - total flux cleaned = -0.000720656 Jy ! Component: 1850 - total flux cleaned = -0.000737437 Jy ! Component: 1900 - total flux cleaned = -0.000821056 Jy ! Component: 1950 - total flux cleaned = -0.000845862 Jy ! Component: 2000 - total flux cleaned = -0.000895311 Jy ! Component: 2050 - total flux cleaned = -0.000936257 Jy ! Component: 2100 - total flux cleaned = -0.000960598 Jy ! Component: 2150 - total flux cleaned = -0.00104958 Jy ! Component: 2200 - total flux cleaned = -0.00106557 Jy ! Component: 2250 - total flux cleaned = -0.00112147 Jy ! Component: 2300 - total flux cleaned = -0.00116112 Jy ! Component: 2350 - total flux cleaned = -0.00120053 Jy ! Component: 2400 - total flux cleaned = -0.00121631 Jy ! Component: 2450 - total flux cleaned = -0.00127084 Jy ! Component: 2500 - total flux cleaned = -0.00132506 Jy ! Component: 2550 - total flux cleaned = -0.00131734 Jy ! Component: 2600 - total flux cleaned = -0.00134799 Jy ! Component: 2650 - total flux cleaned = -0.00139372 Jy ! Component: 2700 - total flux cleaned = -0.00143916 Jy ! Component: 2750 - total flux cleaned = -0.00146175 Jy ! Component: 2800 - total flux cleaned = -0.00147674 Jy ! Component: 2850 - total flux cleaned = -0.00150652 Jy ! Component: 2900 - total flux cleaned = -0.00153616 Jy ! Component: 2950 - total flux cleaned = -0.00155087 Jy ! Component: 3000 - total flux cleaned = -0.00158743 Jy ! Component: 3050 - total flux cleaned = -0.00160198 Jy ! Component: 3100 - total flux cleaned = -0.00163812 Jy ! Component: 3150 - total flux cleaned = -0.0016381 Jy ! Component: 3200 - total flux cleaned = -0.00163816 Jy ! Component: 3250 - total flux cleaned = -0.00168083 Jy ! Component: 3300 - total flux cleaned = -0.00172335 Jy ! Component: 3350 - total flux cleaned = -0.00175855 Jy ! Component: 3400 - total flux cleaned = -0.0017796 Jy ! Component: 3450 - total flux cleaned = -0.00179356 Jy ! Component: 3500 - total flux cleaned = -0.00180742 Jy ! Component: 3550 - total flux cleaned = -0.00182819 Jy ! Component: 3600 - total flux cleaned = -0.00184195 Jy ! Component: 3650 - total flux cleaned = -0.00186931 Jy ! Component: 3700 - total flux cleaned = -0.00189652 Jy ! Component: 3750 - total flux cleaned = -0.00195068 Jy ! Component: 3800 - total flux cleaned = -0.00195075 Jy ! Component: 3850 - total flux cleaned = -0.0020044 Jy ! Component: 3900 - total flux cleaned = -0.00199772 Jy ! Component: 3950 - total flux cleaned = -0.00203092 Jy ! Component: 4000 - total flux cleaned = -0.00206399 Jy ! Component: 4050 - total flux cleaned = -0.00208375 Jy ! Total flux subtracted in 4096 components = -0.00211649 Jy ! Clean residual min=-0.000400 max=0.000384 Jy/beam ! Clean residual mean=-0.000000 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.179291 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 534 components and 0.179291 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0513+0100_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8564 x 2.078 at -3.683 degrees (North through East) ! Clean map min=-0.00061712 max=0.065154 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0513+0100_X_map.fits wmodel /vlbi/uf001/uva//J0513+0100_X_map.mod ! Writing 534 model components to file: /vlbi/uf001/uva//J0513+0100_X_map.mod wobs /vlbi/uf001/uva//J0513+0100_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0513+0100_X_uvs.fits wwins /vlbi/uf001/uva//J0513+0100_X_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uva//J0513+0100_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0651541 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000113834 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.524144 0.524144 1.04829 2.09657 4.19315 8.3863 16.7726 33.5452 67.0904 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.065 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 572.362 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0513+0100_X_dfm.log closed on Sun Jan 13 22:30:26 2019