! Started logfile: /vlbi/uf001/uva//J0510-3142_S_dfm.log on Sun Jan 13 22:29:01 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0510-3142_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0510-3142_S_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.875439 visibilities/baseline/integration-bin.
! Found source: J0510-3142
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4491 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0510-3142_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.078026Jy  sigma=17.082991
! Fit after  self-cal, rms=0.601086Jy  sigma=9.289491
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.436 mas, bmaj=6.544 mas, bpa=-3.129 degrees
! Estimated noise=0.991081 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.319559 Jy
! Component: 100  -  total flux cleaned = 0.3908 Jy
! Total flux subtracted in 100 components = 0.3908 Jy
! Clean residual min=-0.015732 max=0.035629 Jy/beam
! Clean residual mean=-0.000074 rms=0.004801 Jy/beam
! Combined flux in latest and established models = 0.3908 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.3908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113619Jy  sigma=1.656530
! Fit after  self-cal, rms=0.113609Jy  sigma=1.656447
! Inverting map 
! Added new window around map position (-36.5, 70).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0324549 Jy
! Component: 100  -  total flux cleaned = 0.0477735 Jy
! Total flux subtracted in 100 components = 0.0477735 Jy
! Clean residual min=-0.014120 max=0.027262 Jy/beam
! Clean residual mean=-0.000029 rms=0.003774 Jy/beam
! Combined flux in latest and established models = 0.438574 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 12 components and 0.438574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105985Jy  sigma=1.504538
! Fit after  self-cal, rms=0.105359Jy  sigma=1.489514
! Inverting map 
! Added new window around map position (3.5, 6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160178 Jy
! Component: 100  -  total flux cleaned = 0.0202559 Jy
! Total flux subtracted in 100 components = 0.0202559 Jy
! Clean residual min=-0.011976 max=0.017942 Jy/beam
! Clean residual mean=-0.000008 rms=0.003161 Jy/beam
! Combined flux in latest and established models = 0.45883 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 23 components and 0.458829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102359Jy  sigma=1.444460
! Fit after  self-cal, rms=0.102049Jy  sigma=1.437488
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.042 mas, bmaj=7.81 mas, bpa=-3.119 degrees
! Estimated noise=0.690587 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00698801 Jy
! Component: 100  -  total flux cleaned = 0.00835412 Jy
! Component: 150  -  total flux cleaned = 0.00950267 Jy
! Component: 200  -  total flux cleaned = 0.0101681 Jy
! Total flux subtracted in 200 components = 0.0101681 Jy
! Clean residual min=-0.009387 max=0.012732 Jy/beam
! Clean residual mean=0.000008 rms=0.002683 Jy/beam
! Combined flux in latest and established models = 0.468998 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 36 components and 0.468998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100929Jy  sigma=1.421985
! Fit after  self-cal, rms=0.100903Jy  sigma=1.421023
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.042 x 7.81 at -3.119 degrees (North through East)
! Clean map  min=-0.0091598  max=0.39317 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.38     KP        0.96     
!   LA        1.01     MK        0.99     NL        1.05     OV        0.98     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        0.96     HN        1.32     KP        0.96     
!   LA        0.99     MK        1.00     NL        1.01     OV        0.96     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.27     KP        0.96     
!   LA        1.01     MK        0.99     NL        0.99     OV        0.99     
!   PT        1.01     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.100903Jy  sigma=1.421023
! Fit after  self-cal, rms=0.099371Jy  sigma=1.331479
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.048 mas, bmaj=7.777 mas, bpa=-2.725 degrees
! Estimated noise=0.696915 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00611542 Jy
! Component: 100  -  total flux cleaned = -0.00758615 Jy
! Component: 150  -  total flux cleaned = -0.0087262 Jy
! Component: 200  -  total flux cleaned = -0.00935716 Jy
! Total flux subtracted in 200 components = -0.00935716 Jy
! Clean residual min=-0.008537 max=0.006983 Jy/beam
! Clean residual mean=-0.000044 rms=0.001829 Jy/beam
! Combined flux in latest and established models = 0.45964 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 52 components and 0.45964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098825Jy  sigma=1.322199
! Fit after  self-cal, rms=0.098844Jy  sigma=1.321144
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098844Jy  sigma=1.321144
! Fit after  self-cal, rms=0.097307Jy  sigma=1.285999
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.049 mas, bmaj=7.778 mas, bpa=-2.707 degrees
! Estimated noise=0.695836 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00530785 Jy
! Component: 100  -  total flux cleaned = -0.00589005 Jy
! Component: 150  -  total flux cleaned = -0.00625177 Jy
! Component: 200  -  total flux cleaned = -0.00663965 Jy
! Total flux subtracted in 200 components = -0.00663965 Jy
! Clean residual min=-0.006737 max=0.005016 Jy/beam
! Clean residual mean=-0.000035 rms=0.001323 Jy/beam
! Combined flux in latest and established models = 0.453001 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 61 components and 0.453001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096959Jy  sigma=1.280211
! Fit after  self-cal, rms=0.096904Jy  sigma=1.279341
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00125649 Jy
! Component: 100  -  total flux cleaned = -0.001725 Jy
! Component: 150  -  total flux cleaned = -0.00183762 Jy
! Component: 200  -  total flux cleaned = -0.00193857 Jy
! Total flux subtracted in 200 components = -0.00193857 Jy
! Clean residual min=-0.006459 max=0.004893 Jy/beam
! Clean residual mean=-0.000040 rms=0.001271 Jy/beam
! Combined flux in latest and established models = 0.451062 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 67 components and 0.451062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096828Jy  sigma=1.277781
! Fit after  self-cal, rms=0.096808Jy  sigma=1.277658
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096808Jy  sigma=1.277658
! Fit after  self-cal, rms=0.097438Jy  sigma=1.272676
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.049 mas, bmaj=7.775 mas, bpa=-2.673 degrees
! Estimated noise=0.694743 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00396391 Jy
! Component: 100  -  total flux cleaned = -0.00490165 Jy
! Component: 150  -  total flux cleaned = -0.00521513 Jy
! Component: 200  -  total flux cleaned = -0.00532414 Jy
! Total flux subtracted in 200 components = -0.00532414 Jy
! Clean residual min=-0.005576 max=0.004208 Jy/beam
! Clean residual mean=-0.000033 rms=0.001118 Jy/beam
! Combined flux in latest and established models = 0.445738 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 72 components and 0.445738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097254Jy  sigma=1.269744
! Fit after  self-cal, rms=0.097231Jy  sigma=1.269301
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00095915 Jy
! Component: 100  -  total flux cleaned = -0.00120999 Jy
! Component: 150  -  total flux cleaned = -0.00125291 Jy
! Component: 200  -  total flux cleaned = -0.00133186 Jy
! Total flux subtracted in 200 components = -0.00133186 Jy
! Clean residual min=-0.005380 max=0.004112 Jy/beam
! Clean residual mean=-0.000036 rms=0.001086 Jy/beam
! Combined flux in latest and established models = 0.444406 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 79 components and 0.444406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097187Jy  sigma=1.268522
! Fit after  self-cal, rms=0.097177Jy  sigma=1.268459
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097177Jy  sigma=1.268459
! Fit after  self-cal, rms=0.097641Jy  sigma=1.267117
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.274 mas, bmaj=21.67 mas, bpa=2.147 degrees
! Estimated noise=0.881745 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00238783 Jy
! Component: 100  -  total flux cleaned = -0.0029507 Jy
! Component: 150  -  total flux cleaned = -0.00314036 Jy
! Component: 200  -  total flux cleaned = -0.00329347 Jy
! Total flux subtracted in 200 components = -0.00329347 Jy
! Clean residual min=-0.005503 max=0.004419 Jy/beam
! Clean residual mean=-0.000060 rms=0.001376 Jy/beam
! Combined flux in latest and established models = 0.441113 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 88 components and 0.441113 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097570Jy  sigma=1.265969
! Fit after  self-cal, rms=0.097567Jy  sigma=1.265770
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000470245 Jy
! Component: 100  -  total flux cleaned = -0.000593274 Jy
! Component: 150  -  total flux cleaned = -0.000664928 Jy
! Component: 200  -  total flux cleaned = -0.000743949 Jy
! Total flux subtracted in 200 components = -0.000743949 Jy
! Clean residual min=-0.005335 max=0.004469 Jy/beam
! Clean residual mean=-0.000063 rms=0.001354 Jy/beam
! Combined flux in latest and established models = 0.440369 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 92 components and 0.440369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097554Jy  sigma=1.265586
! Fit after  self-cal, rms=0.097550Jy  sigma=1.265525
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.048 mas, bmaj=7.772 mas, bpa=-2.672 degrees
! Estimated noise=0.693518 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.048 x 7.772 at -2.672 degrees (North through East)
! Clean map  min=-0.0046981  max=0.40135 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.432 mas, bmaj=6.499 mas, bpa=-2.584 degrees
! Estimated noise=0.998653 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.321839 Jy
! Component: 100  -  total flux cleaned = 0.3934 Jy
! Component: 150  -  total flux cleaned = 0.417839 Jy
! Component: 200  -  total flux cleaned = 0.430713 Jy
! Total flux subtracted in 200 components = 0.430713 Jy
! Clean residual min=-0.005888 max=0.007676 Jy/beam
! Clean residual mean=-0.000029 rms=0.001620 Jy/beam
! Combined flux in latest and established models = 0.430713 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.430713 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.048 mas, bmaj=7.772 mas, bpa=-2.672 degrees
! Estimated noise=0.693518 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00629791 Jy
! Component: 100  -  total flux cleaned = 0.00757542 Jy
! Component: 150  -  total flux cleaned = 0.00807071 Jy
! Component: 200  -  total flux cleaned = 0.00838089 Jy
! Total flux subtracted in 200 components = 0.00838089 Jy
! Clean residual min=-0.004678 max=0.004356 Jy/beam
! Clean residual mean=-0.000036 rms=0.001056 Jy/beam
! Combined flux in latest and established models = 0.439094 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 22 components and 0.439094 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.274 mas, bmaj=21.67 mas, bpa=2.147 degrees
! Estimated noise=0.881745 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000953234 Jy
! Component: 100  -  total flux cleaned = 0.0010938 Jy
! Component: 150  -  total flux cleaned = 0.00106575 Jy
! Component: 200  -  total flux cleaned = 0.00106519 Jy
! Total flux subtracted in 200 components = 0.00106519 Jy
! Clean residual min=-0.005192 max=0.004419 Jy/beam
! Clean residual mean=-0.000066 rms=0.001349 Jy/beam
! Combined flux in latest and established models = 0.440159 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.0851e-05 Jy
! Component: 100  -  total flux cleaned = -2.07637e-05 Jy
! Component: 150  -  total flux cleaned = -2.05091e-05 Jy
! Component: 200  -  total flux cleaned = -3.73227e-05 Jy
! Total flux subtracted in 200 components = -3.73227e-05 Jy
! Clean residual min=-0.005195 max=0.004425 Jy/beam
! Clean residual mean=-0.000066 rms=0.001347 Jy/beam
! Combined flux in latest and established models = 0.440122 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 35 components and 0.440122 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.048 mas, bmaj=7.772 mas, bpa=-2.672 degrees
! Estimated noise=0.693518 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00017904 Jy
! Component: 100  -  total flux cleaned = -0.000471921 Jy
! Component: 150  -  total flux cleaned = -0.000470642 Jy
! Component: 200  -  total flux cleaned = -0.000527761 Jy
! Total flux subtracted in 200 components = -0.000527761 Jy
! Clean residual min=-0.004789 max=0.004109 Jy/beam
! Clean residual mean=-0.000035 rms=0.001029 Jy/beam
! Combined flux in latest and established models = 0.439594 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 44 components and 0.439594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097766Jy  sigma=1.266617
! Fit after  self-cal, rms=0.097750Jy  sigma=1.266378
wmodel J0510-3142_S_map.mod
! Writing 44 model components to file: J0510-3142_S_map.mod
wobs   J0510-3142_S_uvs.fits
! Writing UV FITS file: J0510-3142_S_uvs.fits
wwins  J0510-3142_S_map.win
! wwins: Wrote 3 windows to J0510-3142_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000786459 Jy
! Component: 100  -  total flux cleaned = -0.000350074 Jy
! Component: 150  -  total flux cleaned = 5.70229e-05 Jy
! Component: 200  -  total flux cleaned = 0.000379632 Jy
! Component: 250  -  total flux cleaned = 0.000689484 Jy
! Component: 300  -  total flux cleaned = 0.000929055 Jy
! Component: 350  -  total flux cleaned = 0.00104486 Jy
! Component: 400  -  total flux cleaned = 0.000934186 Jy
! Component: 450  -  total flux cleaned = 0.000881066 Jy
! Component: 500  -  total flux cleaned = 0.000829518 Jy
! Component: 550  -  total flux cleaned = 0.000829462 Jy
! Component: 600  -  total flux cleaned = 0.000634548 Jy
! Component: 650  -  total flux cleaned = 0.000636652 Jy
! Component: 700  -  total flux cleaned = 0.00049583 Jy
! Component: 750  -  total flux cleaned = 0.000266912 Jy
! Component: 800  -  total flux cleaned = 8.85734e-05 Jy
! Component: 850  -  total flux cleaned = -0.000129516 Jy
! Component: 900  -  total flux cleaned = -0.000385398 Jy
! Component: 950  -  total flux cleaned = -0.000511151 Jy
! Component: 1000  -  total flux cleaned = -0.000676087 Jy
! Component: 1050  -  total flux cleaned = -0.000916831 Jy
! Component: 1100  -  total flux cleaned = -0.00103505 Jy
! Component: 1150  -  total flux cleaned = -0.00107472 Jy
! Component: 1200  -  total flux cleaned = -0.00134002 Jy
! Component: 1250  -  total flux cleaned = -0.00137644 Jy
! Component: 1300  -  total flux cleaned = -0.00152227 Jy
! Component: 1350  -  total flux cleaned = -0.00159372 Jy
! Component: 1400  -  total flux cleaned = -0.00173468 Jy
! Component: 1450  -  total flux cleaned = -0.00190769 Jy
! Component: 1500  -  total flux cleaned = -0.00207809 Jy
! Component: 1550  -  total flux cleaned = -0.00217848 Jy
! Component: 1600  -  total flux cleaned = -0.00224457 Jy
! Component: 1650  -  total flux cleaned = -0.00227733 Jy
! Component: 1700  -  total flux cleaned = -0.00243784 Jy
! Component: 1750  -  total flux cleaned = -0.00247011 Jy
! Component: 1800  -  total flux cleaned = -0.00262664 Jy
! Component: 1850  -  total flux cleaned = -0.00265726 Jy
! Component: 1900  -  total flux cleaned = -0.00265807 Jy
! Component: 1950  -  total flux cleaned = -0.00274786 Jy
! Component: 2000  -  total flux cleaned = -0.00280717 Jy
! Component: 2050  -  total flux cleaned = -0.00292387 Jy
! Component: 2100  -  total flux cleaned = -0.00295239 Jy
! Component: 2150  -  total flux cleaned = -0.00295189 Jy
! Component: 2200  -  total flux cleaned = -0.00298026 Jy
! Component: 2250  -  total flux cleaned = -0.00306341 Jy
! Component: 2300  -  total flux cleaned = -0.00309046 Jy
! Component: 2350  -  total flux cleaned = -0.00319778 Jy
! Component: 2400  -  total flux cleaned = -0.00322443 Jy
! Component: 2450  -  total flux cleaned = -0.00327698 Jy
! Component: 2500  -  total flux cleaned = -0.00340631 Jy
! Component: 2550  -  total flux cleaned = -0.00345733 Jy
! Component: 2600  -  total flux cleaned = -0.0034567 Jy
! Component: 2650  -  total flux cleaned = -0.00348194 Jy
! Component: 2700  -  total flux cleaned = -0.00358084 Jy
! Component: 2750  -  total flux cleaned = -0.00360552 Jy
! Component: 2800  -  total flux cleaned = -0.00375053 Jy
! Component: 2850  -  total flux cleaned = -0.0037743 Jy
! Component: 2900  -  total flux cleaned = -0.00377454 Jy
! Component: 2950  -  total flux cleaned = -0.00391547 Jy
! Component: 3000  -  total flux cleaned = -0.00400826 Jy
! Component: 3050  -  total flux cleaned = -0.00403113 Jy
! Component: 3100  -  total flux cleaned = -0.00419015 Jy
! Component: 3150  -  total flux cleaned = -0.00423507 Jy
! Component: 3200  -  total flux cleaned = -0.00434649 Jy
! Component: 3250  -  total flux cleaned = -0.00450102 Jy
! Component: 3300  -  total flux cleaned = -0.00454481 Jy
! Component: 3350  -  total flux cleaned = -0.00471861 Jy
! Component: 3400  -  total flux cleaned = -0.00478318 Jy
! Component: 3450  -  total flux cleaned = -0.0049754 Jy
! Component: 3500  -  total flux cleaned = -0.0050815 Jy
! Component: 3550  -  total flux cleaned = -0.00527045 Jy
! Component: 3600  -  total flux cleaned = -0.00535368 Jy
! Component: 3650  -  total flux cleaned = -0.00547763 Jy
! Component: 3700  -  total flux cleaned = -0.00560074 Jy
! Component: 3750  -  total flux cleaned = -0.00568226 Jy
! Component: 3800  -  total flux cleaned = -0.00584409 Jy
! Component: 3850  -  total flux cleaned = -0.00598437 Jy
! Component: 3900  -  total flux cleaned = -0.0060838 Jy
! Component: 3950  -  total flux cleaned = -0.00620245 Jy
! Component: 4000  -  total flux cleaned = -0.00632019 Jy
! Component: 4050  -  total flux cleaned = -0.00643689 Jy
! Total flux subtracted in 4096 components = -0.00653353 Jy
! Clean residual min=-0.001219 max=0.000999 Jy/beam
! Clean residual mean=-0.000013 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.433061 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 323 components and 0.433061 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0510-3142_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.048 x 7.772 at -2.672 degrees (North through East)
! Clean map  min=-0.0029157  max=0.4054 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0510-3142_S_map.fits
wmodel /vlbi/uf001/uva//J0510-3142_S_map.mod
! Writing 323 model components to file: /vlbi/uf001/uva//J0510-3142_S_map.mod
wobs   /vlbi/uf001/uva//J0510-3142_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0510-3142_S_uvs.fits
wwins  /vlbi/uf001/uva//J0510-3142_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0510-3142_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.405404 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000339203 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.251011 0.251011 0.502022 1.00404 2.00809 4.01617 8.03234 16.0647 32.1294 64.2588
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.405 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1195.17 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0510-3142_S_dfm.log closed on Sun Jan 13 22:29:06 2019