! Started logfile: /vlbi/uf001/uva//J0505-1615_X_dfm.log on Sun Jan 13 22:27:45 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0505-1615_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0505-1615_X_uva.fits
! AN table 1: 112 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.590675 visibilities/baseline/integration-bin.
! Found source: J0505-1615
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 35724 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0505-1615_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 338 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 338 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 338 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 338 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 338 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 338 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 338 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 338 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 338 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 338 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 338 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 338 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005107Jy  sigma=22.476987
! Fit after  self-cal, rms=0.935715Jy  sigma=20.917399
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6369 mas, bmaj=1.625 mas, bpa=-3.854 degrees
! Estimated noise=0.336832 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0475575 Jy
! Component: 100  -  total flux cleaned = 0.0596195 Jy
! Total flux subtracted in 100 components = 0.0596195 Jy
! Clean residual min=-0.003693 max=0.011952 Jy/beam
! Clean residual mean=0.000003 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.0596195 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0596195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062600Jy  sigma=1.339542
! Fit after  self-cal, rms=0.061896Jy  sigma=1.324123
! Inverting map 
! Added new window around map position (1.2, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102688 Jy
! Component: 100  -  total flux cleaned = 0.0148876 Jy
! Total flux subtracted in 100 components = 0.0148876 Jy
! Clean residual min=-0.002904 max=0.005036 Jy/beam
! Clean residual mean=0.000002 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.0745071 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 8 components and 0.0745071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059935Jy  sigma=1.273810
! Fit after  self-cal, rms=0.059648Jy  sigma=1.268407
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0040697 Jy
! Component: 100  -  total flux cleaned = 0.00603519 Jy
! Total flux subtracted in 100 components = 0.00603519 Jy
! Clean residual min=-0.002756 max=0.003170 Jy/beam
! Clean residual mean=0.000001 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.0805423 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.0805423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059272Jy  sigma=1.257993
! Fit after  self-cal, rms=0.059220Jy  sigma=1.257053
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8339 mas, bmaj=2.021 mas, bpa=-4.532 degrees
! Estimated noise=0.17238 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00333022 Jy
! Component: 100  -  total flux cleaned = 0.00514486 Jy
! Component: 150  -  total flux cleaned = 0.00627941 Jy
! Component: 200  -  total flux cleaned = 0.00702403 Jy
! Total flux subtracted in 200 components = 0.00702403 Jy
! Clean residual min=-0.002006 max=0.002823 Jy/beam
! Clean residual mean=-0.000002 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.0875663 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 31 components and 0.0875663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059058Jy  sigma=1.251915
! Fit after  self-cal, rms=0.059032Jy  sigma=1.251371
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8339 x 2.021 at -4.532 degrees (North through East)
! Clean map  min=-0.0017702  max=0.062433 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.01     HN        0.98     KP        1.00     
!   LA        0.93     MK        0.98     NL        1.25     OV        0.91     
!   PT        0.97     SC        0.93     
! 
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        1.02     KP        1.00     
!   LA        0.90     MK        0.99     NL        1.24     OV        0.92     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.98     HN        1.03     KP        1.02     
!   LA        0.88     MK        1.01     NL        1.19     OV        0.90     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.01     HN        0.97     KP        1.01     
!   LA        0.93     MK        0.98     NL        1.29     OV        0.91     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.00     HN        0.93     KP        1.04     
!   LA        0.91     MK        0.98     NL        1.23     OV        0.89     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.07     HN        0.93     KP        1.01     
!   LA        0.92     MK        0.98     NL        1.21     OV        0.94     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.01     HN        1.04     KP        1.05     
!   LA        0.96     MK        0.98     NL        1.23     OV        0.92     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        1.02     KP        1.01     
!   LA        0.91     MK        1.01     NL        1.22     OV        0.87     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 9.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.97     HN        0.95     KP        1.05     
!   LA        0.94     MK        1.01     NL        1.18     OV        0.93     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 10.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.03     HN        0.95     KP        1.01     
!   LA        0.94     MK        0.97     NL        1.13     OV        0.89     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 11.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        0.96     KP        1.01     
!   LA        0.88     MK        1.03     NL        1.33     OV        0.89     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 12.
!  A total of 60 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.07     HN        0.93     KP        1.04     
!   LA        0.89     MK        0.93     NL        1.17     OV        0.91     
!   PT        0.99     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.059032Jy  sigma=1.251371
! Fit after  self-cal, rms=0.059551Jy  sigma=1.245604
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8275 mas, bmaj=2.021 mas, bpa=-4.729 degrees
! Estimated noise=0.173232 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000485471 Jy
! Component: 100  -  total flux cleaned = 0.000470289 Jy
! Component: 150  -  total flux cleaned = 0.000459222 Jy
! Component: 200  -  total flux cleaned = 0.000448751 Jy
! Total flux subtracted in 200 components = 0.000448751 Jy
! Clean residual min=-0.000999 max=0.001055 Jy/beam
! Clean residual mean=0.000001 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.0880151 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 42 components and 0.0880151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059541Jy  sigma=1.245393
! Fit after  self-cal, rms=0.059652Jy  sigma=1.244850
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059652Jy  sigma=1.244850
! Fit after  self-cal, rms=0.060040Jy  sigma=1.242233
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8268 mas, bmaj=2.023 mas, bpa=-4.697 degrees
! Estimated noise=0.17345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000355132 Jy
! Component: 100  -  total flux cleaned = 0.000355697 Jy
! Component: 150  -  total flux cleaned = 0.000328419 Jy
! Component: 200  -  total flux cleaned = 0.000320953 Jy
! Total flux subtracted in 200 components = 0.000320953 Jy
! Clean residual min=-0.000920 max=0.001028 Jy/beam
! Clean residual mean=0.000000 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.088336 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 47 components and 0.088336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060034Jy  sigma=1.242122
! Fit after  self-cal, rms=0.060050Jy  sigma=1.242043
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-24, 27.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000892698 Jy
! Component: 100  -  total flux cleaned = 0.000852415 Jy
! Component: 150  -  total flux cleaned = 0.000835025 Jy
! Component: 200  -  total flux cleaned = 0.000851363 Jy
! Total flux subtracted in 200 components = 0.000851363 Jy
! Clean residual min=-0.000890 max=0.000926 Jy/beam
! Clean residual mean=0.000000 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0891874 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 63 components and 0.0891874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060032Jy  sigma=1.241634
! Fit after  self-cal, rms=0.060032Jy  sigma=1.241593
! Inverting map 
! Added new window around map position (18.6, 41).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000350935 Jy
! Component: 100  -  total flux cleaned = 0.000399686 Jy
! Component: 150  -  total flux cleaned = 0.000462892 Jy
! Component: 200  -  total flux cleaned = 0.000555394 Jy
! Total flux subtracted in 200 components = 0.000555394 Jy
! Clean residual min=-0.000872 max=0.000901 Jy/beam
! Clean residual mean=0.000001 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.0897428 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 75 components and 0.0897428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060011Jy  sigma=1.241126
! Fit after  self-cal, rms=0.060008Jy  sigma=1.241097
! Inverting map 
! Added new window around map position (35.4, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000758257 Jy
! Component: 100  -  total flux cleaned = 0.000963484 Jy
! Component: 150  -  total flux cleaned = 0.00108705 Jy
! Component: 200  -  total flux cleaned = 0.00115136 Jy
! Total flux subtracted in 200 components = 0.00115136 Jy
! Clean residual min=-0.000817 max=0.000829 Jy/beam
! Clean residual mean=0.000000 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.0908941 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 94 components and 0.0908941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059993Jy  sigma=1.240749
! Fit after  self-cal, rms=0.059993Jy  sigma=1.240726
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059993Jy  sigma=1.240726
! Fit after  self-cal, rms=0.060283Jy  sigma=1.240062
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8271 mas, bmaj=2.026 mas, bpa=-4.601 degrees
! Estimated noise=0.173421 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000397783 Jy
! Component: 100  -  total flux cleaned = 0.00049562 Jy
! Component: 150  -  total flux cleaned = 0.000541358 Jy
! Component: 200  -  total flux cleaned = 0.000570504 Jy
! Total flux subtracted in 200 components = 0.000570504 Jy
! Clean residual min=-0.000775 max=0.000869 Jy/beam
! Clean residual mean=0.000001 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.0914646 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 98 components and 0.0914646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060275Jy  sigma=1.239904
! Fit after  self-cal, rms=0.060286Jy  sigma=1.239874
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (38, 49.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000650923 Jy
! Component: 100  -  total flux cleaned = 0.000746657 Jy
! Component: 150  -  total flux cleaned = 0.000761247 Jy
! Component: 200  -  total flux cleaned = 0.000774822 Jy
! Total flux subtracted in 200 components = 0.000774822 Jy
! Clean residual min=-0.000767 max=0.000802 Jy/beam
! Clean residual mean=0.000001 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.0922394 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 113 components and 0.0922394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060275Jy  sigma=1.239624
! Fit after  self-cal, rms=0.060275Jy  sigma=1.239605
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060275Jy  sigma=1.239605
! Fit after  self-cal, rms=0.060253Jy  sigma=1.239462
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.254 mas, bmaj=4.32 mas, bpa=1.027 degrees
! Estimated noise=0.225323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.1501e-05 Jy
! Component: 100  -  total flux cleaned = 0.000193425 Jy
! Component: 150  -  total flux cleaned = 0.000307566 Jy
! Component: 200  -  total flux cleaned = 0.000365982 Jy
! Total flux subtracted in 200 components = 0.000365982 Jy
! Clean residual min=-0.000766 max=0.000853 Jy/beam
! Clean residual mean=0.000001 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.0926054 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 130 components and 0.0926054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060251Jy  sigma=1.239430
! Fit after  self-cal, rms=0.060252Jy  sigma=1.239422
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.71459e-05 Jy
! Component: 100  -  total flux cleaned = 0.000115053 Jy
! Component: 150  -  total flux cleaned = 0.000129515 Jy
! Component: 200  -  total flux cleaned = 0.000129506 Jy
! Total flux subtracted in 200 components = 0.000129506 Jy
! Clean residual min=-0.000762 max=0.000836 Jy/beam
! Clean residual mean=0.000001 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0927349 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 138 components and 0.0927349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060251Jy  sigma=1.239418
! Fit after  self-cal, rms=0.060251Jy  sigma=1.239411
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8268 mas, bmaj=2.026 mas, bpa=-4.602 degrees
! Estimated noise=0.173401 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8268 x 2.026 at -4.602 degrees (North through East)
! Clean map  min=-0.0011188  max=0.062113 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.63 mas, bmaj=1.627 mas, bpa=-3.751 degrees
! Estimated noise=0.340326 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0481884 Jy
! Component: 100  -  total flux cleaned = 0.0651032 Jy
! Component: 150  -  total flux cleaned = 0.0739319 Jy
! Component: 200  -  total flux cleaned = 0.0786824 Jy
! Total flux subtracted in 200 components = 0.0786824 Jy
! Clean residual min=-0.002121 max=0.002315 Jy/beam
! Clean residual mean=0.000001 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.0786824 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0786824 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8268 mas, bmaj=2.026 mas, bpa=-4.602 degrees
! Estimated noise=0.173401 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00406151 Jy
! Component: 100  -  total flux cleaned = 0.00628017 Jy
! Component: 150  -  total flux cleaned = 0.00780206 Jy
! Component: 200  -  total flux cleaned = 0.00904257 Jy
! Total flux subtracted in 200 components = 0.00904257 Jy
! Clean residual min=-0.000951 max=0.000987 Jy/beam
! Clean residual mean=0.000000 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.0877249 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 36 components and 0.087725 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.254 mas, bmaj=4.32 mas, bpa=1.027 degrees
! Estimated noise=0.225323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138776 Jy
! Component: 100  -  total flux cleaned = 0.00202199 Jy
! Component: 150  -  total flux cleaned = 0.00258007 Jy
! Component: 200  -  total flux cleaned = 0.00300216 Jy
! Total flux subtracted in 200 components = 0.00300216 Jy
! Clean residual min=-0.000821 max=0.000843 Jy/beam
! Clean residual mean=0.000001 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.0907271 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000231382 Jy
! Component: 100  -  total flux cleaned = 0.000459257 Jy
! Component: 150  -  total flux cleaned = 0.000627366 Jy
! Component: 200  -  total flux cleaned = 0.00079659 Jy
! Total flux subtracted in 200 components = 0.00079659 Jy
! Clean residual min=-0.000798 max=0.000824 Jy/beam
! Clean residual mean=0.000001 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.0915237 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 82 components and 0.0915237 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8268 mas, bmaj=2.026 mas, bpa=-4.602 degrees
! Estimated noise=0.173401 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000249043 Jy
! Component: 100  -  total flux cleaned = 0.000493218 Jy
! Component: 150  -  total flux cleaned = 0.000565483 Jy
! Component: 200  -  total flux cleaned = 0.000610157 Jy
! Total flux subtracted in 200 components = 0.000610157 Jy
! Clean residual min=-0.000848 max=0.000861 Jy/beam
! Clean residual mean=0.000000 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.0921339 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 101 components and 0.0921339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060277Jy  sigma=1.239944
! Fit after  self-cal, rms=0.060272Jy  sigma=1.239884
wmodel J0505-1615_X_map.mod
! Writing 101 model components to file: J0505-1615_X_map.mod
wobs   J0505-1615_X_uvs.fits
! Writing UV FITS file: J0505-1615_X_uvs.fits
wwins  J0505-1615_X_map.win
! wwins: Wrote 6 windows to J0505-1615_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000188862 Jy
! Component: 100  -  total flux cleaned = 0.000333851 Jy
! Component: 150  -  total flux cleaned = 0.000389352 Jy
! Component: 200  -  total flux cleaned = 0.000456389 Jy
! Component: 250  -  total flux cleaned = 0.000469368 Jy
! Component: 300  -  total flux cleaned = 0.000482125 Jy
! Component: 350  -  total flux cleaned = 0.000494606 Jy
! Component: 400  -  total flux cleaned = 0.000470038 Jy
! Component: 450  -  total flux cleaned = 0.000470116 Jy
! Component: 500  -  total flux cleaned = 0.000505731 Jy
! Component: 550  -  total flux cleaned = 0.00049402 Jy
! Component: 600  -  total flux cleaned = 0.000482374 Jy
! Component: 650  -  total flux cleaned = 0.00047076 Jy
! Component: 700  -  total flux cleaned = 0.000414379 Jy
! Component: 750  -  total flux cleaned = 0.000369679 Jy
! Component: 800  -  total flux cleaned = 0.000325528 Jy
! Component: 850  -  total flux cleaned = 0.000303846 Jy
! Component: 900  -  total flux cleaned = 0.000249672 Jy
! Component: 950  -  total flux cleaned = 0.000185343 Jy
! Component: 1000  -  total flux cleaned = 0.000174653 Jy
! Component: 1050  -  total flux cleaned = 0.000143053 Jy
! Component: 1100  -  total flux cleaned = 0.000111558 Jy
! Component: 1150  -  total flux cleaned = 9.07674e-05 Jy
! Component: 1200  -  total flux cleaned = 3.93263e-05 Jy
! Component: 1250  -  total flux cleaned = -1.16677e-05 Jy
! Component: 1300  -  total flux cleaned = -1.49259e-06 Jy
! Component: 1350  -  total flux cleaned = -3.16359e-05 Jy
! Component: 1400  -  total flux cleaned = -5.15688e-05 Jy
! Component: 1450  -  total flux cleaned = -6.14845e-05 Jy
! Component: 1500  -  total flux cleaned = -4.1856e-05 Jy
! Component: 1550  -  total flux cleaned = -3.21631e-05 Jy
! Component: 1600  -  total flux cleaned = -9.99091e-05 Jy
! Component: 1650  -  total flux cleaned = -7.113e-05 Jy
! Component: 1700  -  total flux cleaned = -5.19937e-05 Jy
! Component: 1750  -  total flux cleaned = -8.99605e-05 Jy
! Component: 1800  -  total flux cleaned = -9.93142e-05 Jy
! Component: 1850  -  total flux cleaned = -7.11607e-05 Jy
! Component: 1900  -  total flux cleaned = -7.11841e-05 Jy
! Component: 1950  -  total flux cleaned = -6.19972e-05 Jy
! Component: 2000  -  total flux cleaned = -9.886e-05 Jy
! Component: 2050  -  total flux cleaned = -7.14832e-05 Jy
! Component: 2100  -  total flux cleaned = -7.14306e-05 Jy
! Component: 2150  -  total flux cleaned = -6.25022e-05 Jy
! Component: 2200  -  total flux cleaned = -6.24272e-05 Jy
! Component: 2250  -  total flux cleaned = -4.45129e-05 Jy
! Component: 2300  -  total flux cleaned = -3.56138e-05 Jy
! Component: 2350  -  total flux cleaned = -4.44587e-05 Jy
! Component: 2400  -  total flux cleaned = -7.08606e-05 Jy
! Component: 2450  -  total flux cleaned = -6.20306e-05 Jy
! Component: 2500  -  total flux cleaned = -6.20431e-05 Jy
! Component: 2550  -  total flux cleaned = -7.06565e-05 Jy
! Component: 2600  -  total flux cleaned = -5.34626e-05 Jy
! Component: 2650  -  total flux cleaned = -2.78808e-05 Jy
! Component: 2700  -  total flux cleaned = -5.33874e-05 Jy
! Component: 2750  -  total flux cleaned = -2.80176e-05 Jy
! Component: 2800  -  total flux cleaned = -2.79562e-05 Jy
! Component: 2850  -  total flux cleaned = -6.15014e-05 Jy
! Component: 2900  -  total flux cleaned = -2.82062e-05 Jy
! Component: 2950  -  total flux cleaned = -2.81431e-05 Jy
! Component: 3000  -  total flux cleaned = -2.81207e-05 Jy
! Component: 3050  -  total flux cleaned = 2.1125e-05 Jy
! Component: 3100  -  total flux cleaned = 2.1151e-05 Jy
! Component: 3150  -  total flux cleaned = 2.11169e-05 Jy
! Component: 3200  -  total flux cleaned = 2.91516e-05 Jy
! Component: 3250  -  total flux cleaned = 4.52966e-05 Jy
! Component: 3300  -  total flux cleaned = 6.13484e-05 Jy
! Component: 3350  -  total flux cleaned = 4.535e-05 Jy
! Component: 3400  -  total flux cleaned = 6.91745e-05 Jy
! Component: 3450  -  total flux cleaned = 5.33037e-05 Jy
! Component: 3500  -  total flux cleaned = 9.26527e-05 Jy
! Component: 3550  -  total flux cleaned = 0.000131864 Jy
! Component: 3600  -  total flux cleaned = 0.000147467 Jy
! Component: 3650  -  total flux cleaned = 0.000162956 Jy
! Component: 3700  -  total flux cleaned = 0.000201645 Jy
! Component: 3750  -  total flux cleaned = 0.000186261 Jy
! Component: 3800  -  total flux cleaned = 0.000216876 Jy
! Component: 3850  -  total flux cleaned = 0.000201658 Jy
! Component: 3900  -  total flux cleaned = 0.000262477 Jy
! Component: 3950  -  total flux cleaned = 0.000285192 Jy
! Component: 4000  -  total flux cleaned = 0.000315339 Jy
! Component: 4050  -  total flux cleaned = 0.000292893 Jy
! Total flux subtracted in 4096 components = 0.000315348 Jy
! Clean residual min=-0.000527 max=0.000415 Jy/beam
! Clean residual mean=0.000000 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.0924492 Jy
keep
! Adding 318 model components to the UV plane model.
! The established model now contains 419 components and 0.0924492 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0505-1615_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8268 x 2.026 at -4.602 degrees (North through East)
! Clean map  min=-0.00087572  max=0.061989 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0505-1615_X_map.fits
wmodel /vlbi/uf001/uva//J0505-1615_X_map.mod
! Writing 419 model components to file: /vlbi/uf001/uva//J0505-1615_X_map.mod
wobs   /vlbi/uf001/uva//J0505-1615_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0505-1615_X_uvs.fits
wwins  /vlbi/uf001/uva//J0505-1615_X_map.win
! wwins: Wrote 7 windows to /vlbi/uf001/uva//J0505-1615_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0619891 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000130434 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.631244 0.631244 1.26249 2.52498 5.04995 10.0999 20.1998 40.3996 80.7992
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.061 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  475.252 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0505-1615_X_dfm.log closed on Sun Jan 13 22:27:51 2019