! Started logfile: /vlbi/uf001/uva//J0459+3106_S_dfm.log on Sun Jan 13 22:24:21 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0459+3106_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0459+3106_S_uva.fits
! AN table 1: 56 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.734921 visibilities/baseline/integration-bin.
! Found source: J0459+3106
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5556 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0459+3106_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 163 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 163 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 163 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.042000Jy  sigma=21.850739
! Fit after  self-cal, rms=0.789184Jy  sigma=16.589875
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.911 mas, bmaj=5.62 mas, bpa=-4.447 degrees
! Estimated noise=0.629885 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.16002 Jy
! Component: 100  -  total flux cleaned = 0.198115 Jy
! Total flux subtracted in 100 components = 0.198115 Jy
! Clean residual min=-0.011507 max=0.053494 Jy/beam
! Clean residual mean=-0.000013 rms=0.003746 Jy/beam
! Combined flux in latest and established models = 0.198115 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.198115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096877Jy  sigma=1.979305
! Fit after  self-cal, rms=0.096848Jy  sigma=1.978133
! Inverting map 
! Added new window around map position (6.5, 4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0434464 Jy
! Component: 100  -  total flux cleaned = 0.0629663 Jy
! Total flux subtracted in 100 components = 0.0629663 Jy
! Clean residual min=-0.008279 max=0.015948 Jy/beam
! Clean residual mean=-0.000009 rms=0.002019 Jy/beam
! Combined flux in latest and established models = 0.261081 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 23 components and 0.261081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071989Jy  sigma=1.456027
! Fit after  self-cal, rms=0.068416Jy  sigma=1.391418
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161966 Jy
! Component: 100  -  total flux cleaned = 0.026108 Jy
! Total flux subtracted in 100 components = 0.026108 Jy
! Clean residual min=-0.005416 max=0.007334 Jy/beam
! Clean residual mean=-0.000008 rms=0.001335 Jy/beam
! Combined flux in latest and established models = 0.287189 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 40 components and 0.287189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063148Jy  sigma=1.278867
! Fit after  self-cal, rms=0.062805Jy  sigma=1.273301
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.463 mas, bmaj=6.282 mas, bpa=-2.012 degrees
! Estimated noise=0.494442 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105051 Jy
! Component: 100  -  total flux cleaned = 0.0171388 Jy
! Component: 150  -  total flux cleaned = 0.0217845 Jy
! Component: 200  -  total flux cleaned = 0.0251556 Jy
! Total flux subtracted in 200 components = 0.0251556 Jy
! Clean residual min=-0.005170 max=0.005407 Jy/beam
! Clean residual mean=-0.000010 rms=0.001179 Jy/beam
! Combined flux in latest and established models = 0.312345 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 86 components and 0.312345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060809Jy  sigma=1.228254
! Fit after  self-cal, rms=0.060684Jy  sigma=1.226119
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.463 x 6.282 at -2.012 degrees (North through East)
! Clean map  min=-0.0047822  max=0.20312 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.88     HN        0.99     KP        1.03     
!   LA        0.93     MK        1.01     NL        1.07     OV        0.99     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.89     HN        0.99     KP        1.04     
!   LA        0.95     MK        1.02     NL        1.05     OV        0.98     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.91     HN        1.02     KP        1.03     
!   LA        0.95     MK        1.02     NL        1.15     OV        1.00     
!   PT        1.03     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.060684Jy  sigma=1.226119
! Fit after  self-cal, rms=0.057862Jy  sigma=1.174880
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.451 mas, bmaj=6.294 mas, bpa=-2.018 degrees
! Estimated noise=0.496584 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0012573 Jy
! Component: 100  -  total flux cleaned = -0.00147087 Jy
! Component: 150  -  total flux cleaned = -0.00157969 Jy
! Component: 200  -  total flux cleaned = -0.00162573 Jy
! Total flux subtracted in 200 components = -0.00162573 Jy
! Clean residual min=-0.002354 max=0.002413 Jy/beam
! Clean residual mean=0.000007 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.310719 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 99 components and 0.310719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057814Jy  sigma=1.174012
! Fit after  self-cal, rms=0.057837Jy  sigma=1.173763
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057837Jy  sigma=1.173763
! Fit after  self-cal, rms=0.057300Jy  sigma=1.163033
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.45 mas, bmaj=6.297 mas, bpa=-2.202 degrees
! Estimated noise=0.496597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.89283e-05 Jy
! Component: 100  -  total flux cleaned = -0.00013708 Jy
! Component: 150  -  total flux cleaned = -0.000248804 Jy
! Component: 200  -  total flux cleaned = -0.00030677 Jy
! Total flux subtracted in 200 components = -0.00030677 Jy
! Clean residual min=-0.002075 max=0.002211 Jy/beam
! Clean residual mean=-0.000001 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.310412 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 107 components and 0.310412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057279Jy  sigma=1.162565
! Fit after  self-cal, rms=0.057278Jy  sigma=1.162502
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.97755e-05 Jy
! Component: 100  -  total flux cleaned = -0.000100039 Jy
! Component: 150  -  total flux cleaned = -0.000115132 Jy
! Component: 200  -  total flux cleaned = -0.000115018 Jy
! Total flux subtracted in 200 components = -0.000115018 Jy
! Clean residual min=-0.002059 max=0.002178 Jy/beam
! Clean residual mean=-0.000001 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.310297 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 112 components and 0.310297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057269Jy  sigma=1.162329
! Fit after  self-cal, rms=0.057268Jy  sigma=1.162317
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057268Jy  sigma=1.162317
! Fit after  self-cal, rms=0.057297Jy  sigma=1.162216
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.449 mas, bmaj=6.301 mas, bpa=-2.272 degrees
! Estimated noise=0.496511 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000225865 Jy
! Component: 100  -  total flux cleaned = -0.000298176 Jy
! Component: 150  -  total flux cleaned = -0.000314005 Jy
! Component: 200  -  total flux cleaned = -0.000328987 Jy
! Total flux subtracted in 200 components = -0.000328987 Jy
! Clean residual min=-0.002001 max=0.002212 Jy/beam
! Clean residual mean=-0.000002 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.309968 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 115 components and 0.309968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057287Jy  sigma=1.162019
! Fit after  self-cal, rms=0.057287Jy  sigma=1.162008
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-104.5, -122.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000461872 Jy
! Component: 100  -  total flux cleaned = 0.000713917 Jy
! Component: 150  -  total flux cleaned = 0.000844909 Jy
! Component: 200  -  total flux cleaned = 0.000926168 Jy
! Total flux subtracted in 200 components = 0.000926168 Jy
! Clean residual min=-0.001930 max=0.002043 Jy/beam
! Clean residual mean=-0.000001 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.310895 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 130 components and 0.310895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057189Jy  sigma=1.160450
! Fit after  self-cal, rms=0.057188Jy  sigma=1.160312
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057188Jy  sigma=1.160312
! Fit after  self-cal, rms=0.057166Jy  sigma=1.160147
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.323 mas, bmaj=9.679 mas, bpa=-1.522 degrees
! Estimated noise=0.637141 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00018401 Jy
! Component: 100  -  total flux cleaned = 0.000312953 Jy
! Component: 150  -  total flux cleaned = 0.00033095 Jy
! Component: 200  -  total flux cleaned = 0.000331471 Jy
! Total flux subtracted in 200 components = 0.000331471 Jy
! Clean residual min=-0.002228 max=0.002212 Jy/beam
! Clean residual mean=-0.000001 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.311226 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 152 components and 0.311226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057147Jy  sigma=1.159899
! Fit after  self-cal, rms=0.057148Jy  sigma=1.159873
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.47752e-05 Jy
! Component: 100  -  total flux cleaned = 6.74922e-05 Jy
! Component: 150  -  total flux cleaned = 4.22624e-05 Jy
! Component: 200  -  total flux cleaned = 1.87888e-05 Jy
! Total flux subtracted in 200 components = 1.87888e-05 Jy
! Clean residual min=-0.002230 max=0.002212 Jy/beam
! Clean residual mean=-0.000001 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.311245 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 158 components and 0.311245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057143Jy  sigma=1.159825
! Fit after  self-cal, rms=0.057143Jy  sigma=1.159821
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.449 mas, bmaj=6.302 mas, bpa=-2.327 degrees
! Estimated noise=0.496227 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.449 x 6.302 at -2.327 degrees (North through East)
! Clean map  min=-0.0024741  max=0.2015 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.916 mas, bmaj=5.651 mas, bpa=-4.504 degrees
! Estimated noise=0.634573 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.160682 Jy
! Component: 100  -  total flux cleaned = 0.21602 Jy
! Component: 150  -  total flux cleaned = 0.245072 Jy
! Component: 200  -  total flux cleaned = 0.264095 Jy
! Total flux subtracted in 200 components = 0.264095 Jy
! Clean residual min=-0.004597 max=0.010250 Jy/beam
! Clean residual mean=-0.000004 rms=0.001269 Jy/beam
! Combined flux in latest and established models = 0.264095 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.264095 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.449 mas, bmaj=6.302 mas, bpa=-2.327 degrees
! Estimated noise=0.496227 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.017051 Jy
! Component: 100  -  total flux cleaned = 0.0270788 Jy
! Component: 150  -  total flux cleaned = 0.0332403 Jy
! Component: 200  -  total flux cleaned = 0.0374291 Jy
! Total flux subtracted in 200 components = 0.0374291 Jy
! Clean residual min=-0.002294 max=0.002482 Jy/beam
! Clean residual mean=-0.000003 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.301524 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 51 components and 0.301524 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.323 mas, bmaj=9.679 mas, bpa=-1.522 degrees
! Estimated noise=0.637141 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00466204 Jy
! Component: 100  -  total flux cleaned = 0.00643413 Jy
! Component: 150  -  total flux cleaned = 0.00735509 Jy
! Component: 200  -  total flux cleaned = 0.00808695 Jy
! Total flux subtracted in 200 components = 0.00808695 Jy
! Clean residual min=-0.002453 max=0.002229 Jy/beam
! Clean residual mean=-0.000002 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.309611 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000541213 Jy
! Component: 100  -  total flux cleaned = 0.000925565 Jy
! Component: 150  -  total flux cleaned = 0.00123157 Jy
! Component: 200  -  total flux cleaned = 0.00142054 Jy
! Total flux subtracted in 200 components = 0.00142054 Jy
! Clean residual min=-0.002314 max=0.002202 Jy/beam
! Clean residual mean=-0.000001 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.311031 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 117 components and 0.311031 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.449 mas, bmaj=6.302 mas, bpa=-2.327 degrees
! Estimated noise=0.496227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000200715 Jy
! Component: 100  -  total flux cleaned = 0.000162449 Jy
! Component: 150  -  total flux cleaned = 0.000223175 Jy
! Component: 200  -  total flux cleaned = 0.000252547 Jy
! Total flux subtracted in 200 components = 0.000252547 Jy
! Clean residual min=-0.002118 max=0.002011 Jy/beam
! Clean residual mean=-0.000000 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.311284 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 133 components and 0.311284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057210Jy  sigma=1.161295
! Fit after  self-cal, rms=0.057208Jy  sigma=1.161004
wmodel J0459+3106_S_map.mod
! Writing 133 model components to file: J0459+3106_S_map.mod
wobs   J0459+3106_S_uvs.fits
! Writing UV FITS file: J0459+3106_S_uvs.fits
wwins  J0459+3106_S_map.win
! wwins: Wrote 3 windows to J0459+3106_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000226634 Jy
! Component: 100  -  total flux cleaned = -0.000369166 Jy
! Component: 150  -  total flux cleaned = -0.00056943 Jy
! Component: 200  -  total flux cleaned = -0.000828271 Jy
! Component: 250  -  total flux cleaned = -0.00101728 Jy
! Component: 300  -  total flux cleaned = -0.00120168 Jy
! Component: 350  -  total flux cleaned = -0.00144072 Jy
! Component: 400  -  total flux cleaned = -0.00164548 Jy
! Component: 450  -  total flux cleaned = -0.00184594 Jy
! Component: 500  -  total flux cleaned = -0.00204262 Jy
! Component: 550  -  total flux cleaned = -0.00226342 Jy
! Component: 600  -  total flux cleaned = -0.0023988 Jy
! Component: 650  -  total flux cleaned = -0.00250547 Jy
! Component: 700  -  total flux cleaned = -0.00253168 Jy
! Component: 750  -  total flux cleaned = -0.00255755 Jy
! Component: 800  -  total flux cleaned = -0.00258343 Jy
! Component: 850  -  total flux cleaned = -0.00260907 Jy
! Component: 900  -  total flux cleaned = -0.00260916 Jy
! Component: 950  -  total flux cleaned = -0.00265784 Jy
! Component: 1000  -  total flux cleaned = -0.00270615 Jy
! Component: 1050  -  total flux cleaned = -0.0027783 Jy
! Component: 1100  -  total flux cleaned = -0.00289598 Jy
! Component: 1150  -  total flux cleaned = -0.00282602 Jy
! Component: 1200  -  total flux cleaned = -0.00289567 Jy
! Component: 1250  -  total flux cleaned = -0.00298668 Jy
! Component: 1300  -  total flux cleaned = -0.00287375 Jy
! Component: 1350  -  total flux cleaned = -0.00287423 Jy
! Component: 1400  -  total flux cleaned = -0.00289685 Jy
! Component: 1450  -  total flux cleaned = -0.00289711 Jy
! Component: 1500  -  total flux cleaned = -0.00296208 Jy
! Component: 1550  -  total flux cleaned = -0.00291907 Jy
! Component: 1600  -  total flux cleaned = -0.00287679 Jy
! Component: 1650  -  total flux cleaned = -0.00296076 Jy
! Component: 1700  -  total flux cleaned = -0.00296081 Jy
! Component: 1750  -  total flux cleaned = -0.00296074 Jy
! Component: 1800  -  total flux cleaned = -0.00296076 Jy
! Component: 1850  -  total flux cleaned = -0.00298061 Jy
! Component: 1900  -  total flux cleaned = -0.00296069 Jy
! Component: 1950  -  total flux cleaned = -0.00292108 Jy
! Component: 2000  -  total flux cleaned = -0.00303898 Jy
! Component: 2050  -  total flux cleaned = -0.00301917 Jy
! Component: 2100  -  total flux cleaned = -0.00301914 Jy
! Component: 2150  -  total flux cleaned = -0.00305743 Jy
! Component: 2200  -  total flux cleaned = -0.0030954 Jy
! Component: 2250  -  total flux cleaned = -0.00311399 Jy
! Component: 2300  -  total flux cleaned = -0.00311387 Jy
! Component: 2350  -  total flux cleaned = -0.00313227 Jy
! Component: 2400  -  total flux cleaned = -0.00316875 Jy
! Component: 2450  -  total flux cleaned = -0.00322314 Jy
! Component: 2500  -  total flux cleaned = -0.00320513 Jy
! Component: 2550  -  total flux cleaned = -0.00329456 Jy
! Component: 2600  -  total flux cleaned = -0.00327693 Jy
! Component: 2650  -  total flux cleaned = -0.00327704 Jy
! Component: 2700  -  total flux cleaned = -0.00329452 Jy
! Component: 2750  -  total flux cleaned = -0.00319105 Jy
! Component: 2800  -  total flux cleaned = -0.00315688 Jy
! Component: 2850  -  total flux cleaned = -0.00322504 Jy
! Component: 2900  -  total flux cleaned = -0.00310672 Jy
! Component: 2950  -  total flux cleaned = -0.00314018 Jy
! Component: 3000  -  total flux cleaned = -0.00309026 Jy
! Component: 3050  -  total flux cleaned = -0.00302435 Jy
! Component: 3100  -  total flux cleaned = -0.00295902 Jy
! Component: 3150  -  total flux cleaned = -0.00302435 Jy
! Component: 3200  -  total flux cleaned = -0.00299211 Jy
! Component: 3250  -  total flux cleaned = -0.00300813 Jy
! Component: 3300  -  total flux cleaned = -0.00297624 Jy
! Component: 3350  -  total flux cleaned = -0.00296025 Jy
! Component: 3400  -  total flux cleaned = -0.00296024 Jy
! Component: 3450  -  total flux cleaned = -0.00299122 Jy
! Component: 3500  -  total flux cleaned = -0.00288273 Jy
! Component: 3550  -  total flux cleaned = -0.00285209 Jy
! Component: 3600  -  total flux cleaned = -0.00279125 Jy
! Component: 3650  -  total flux cleaned = -0.00286702 Jy
! Component: 3700  -  total flux cleaned = -0.00274649 Jy
! Component: 3750  -  total flux cleaned = -0.00279144 Jy
! Component: 3800  -  total flux cleaned = -0.00282142 Jy
! Component: 3850  -  total flux cleaned = -0.00280645 Jy
! Component: 3900  -  total flux cleaned = -0.00280648 Jy
! Component: 3950  -  total flux cleaned = -0.00274831 Jy
! Component: 4000  -  total flux cleaned = -0.00270478 Jy
! Component: 4050  -  total flux cleaned = -0.00269044 Jy
! Total flux subtracted in 4096 components = -0.00273318 Jy
! Clean residual min=-0.000879 max=0.000845 Jy/beam
! Clean residual mean=0.000001 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.308551 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 428 components and 0.308551 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0459+3106_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.449 x 6.302 at -2.327 degrees (North through East)
! Clean map  min=-0.0024295  max=0.20125 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0459+3106_S_map.fits
wmodel /vlbi/uf001/uva//J0459+3106_S_map.mod
! Writing 428 model components to file: /vlbi/uf001/uva//J0459+3106_S_map.mod
wobs   /vlbi/uf001/uva//J0459+3106_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0459+3106_S_uvs.fits
wwins  /vlbi/uf001/uva//J0459+3106_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0459+3106_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.201248 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000259517 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.386861 0.386861 0.773721 1.54744 3.09489 6.18977 12.3795 24.7591 49.5182 99.0363
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.201 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  775.473 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0459+3106_S_dfm.log closed on Sun Jan 13 22:24:26 2019