! Started logfile: /vlbi/uf001/uva//J0459+0229_X_dfm.log on Sun Jan 13 22:24:12 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0459+0229_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0459+0229_X_uva.fits ! AN table 1: 87 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.913155 visibilities/baseline/integration-bin. ! Found source: J0459+0229 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 42900 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0459+0229_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.080033Jy sigma=21.595879 ! Fit after self-cal, rms=0.707180Jy sigma=14.506487 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6657 mas, bmaj=1.716 mas, bpa=-3.849 degrees ! Estimated noise=0.314181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.206522 Jy ! Component: 100 - total flux cleaned = 0.271399 Jy ! Total flux subtracted in 100 components = 0.271399 Jy ! Clean residual min=-0.027502 max=0.077785 Jy/beam ! Clean residual mean=-0.000019 rms=0.006930 Jy/beam ! Combined flux in latest and established models = 0.271399 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.271399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.246142Jy sigma=4.564722 ! Fit after self-cal, rms=0.245607Jy sigma=4.557039 ! Inverting map ! Added new window around map position (1.2, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0807529 Jy ! Component: 100 - total flux cleaned = 0.132165 Jy ! Total flux subtracted in 100 components = 0.132165 Jy ! Clean residual min=-0.031647 max=0.060486 Jy/beam ! Clean residual mean=-0.000015 rms=0.005179 Jy/beam ! Combined flux in latest and established models = 0.403564 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 29 components and 0.403564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.184996Jy sigma=3.422738 ! Fit after self-cal, rms=0.176926Jy sigma=3.283245 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0541555 Jy ! Component: 100 - total flux cleaned = 0.0898006 Jy ! Total flux subtracted in 100 components = 0.0898006 Jy ! Clean residual min=-0.022134 max=0.039966 Jy/beam ! Clean residual mean=-0.000011 rms=0.003627 Jy/beam ! Combined flux in latest and established models = 0.493365 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 41 components and 0.493365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136821Jy sigma=2.534497 ! Fit after self-cal, rms=0.132340Jy sigma=2.457321 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0361908 Jy ! Component: 100 - total flux cleaned = 0.0602555 Jy ! Total flux subtracted in 100 components = 0.0602555 Jy ! Clean residual min=-0.013941 max=0.027979 Jy/beam ! Clean residual mean=-0.000008 rms=0.002608 Jy/beam ! Combined flux in latest and established models = 0.55362 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 54 components and 0.55362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107820Jy sigma=1.999250 ! Fit after self-cal, rms=0.105423Jy sigma=1.958739 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235844 Jy ! Component: 100 - total flux cleaned = 0.0400282 Jy ! Total flux subtracted in 100 components = 0.0400282 Jy ! Clean residual min=-0.008816 max=0.020657 Jy/beam ! Clean residual mean=-0.000007 rms=0.002009 Jy/beam ! Combined flux in latest and established models = 0.593648 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 0.593648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091617Jy sigma=1.703911 ! Fit after self-cal, rms=0.090539Jy sigma=1.686435 ! Inverting map ! Added new window around map position (-1, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179152 Jy ! Component: 100 - total flux cleaned = 0.0309271 Jy ! Total flux subtracted in 100 components = 0.0309271 Jy ! Clean residual min=-0.007693 max=0.012090 Jy/beam ! Clean residual mean=-0.000005 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.624575 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 68 components and 0.624575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081888Jy sigma=1.527770 ! Fit after self-cal, rms=0.081678Jy sigma=1.525302 ! Inverting map ! Added new window around map position (0.2, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126801 Jy ! Component: 100 - total flux cleaned = 0.0217661 Jy ! Total flux subtracted in 100 components = 0.0217661 Jy ! Clean residual min=-0.006966 max=0.008492 Jy/beam ! Clean residual mean=-0.000005 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 0.646342 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.646342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076761Jy sigma=1.434708 ! Fit after self-cal, rms=0.076531Jy sigma=1.431235 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8284 mas, bmaj=1.999 mas, bpa=-3.211 degrees ! Estimated noise=0.175261 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183589 Jy ! Component: 100 - total flux cleaned = 0.0310057 Jy ! Component: 150 - total flux cleaned = 0.0407033 Jy ! Component: 200 - total flux cleaned = 0.0483633 Jy ! Total flux subtracted in 200 components = 0.0483633 Jy ! Clean residual min=-0.008216 max=0.011353 Jy/beam ! Clean residual mean=-0.000007 rms=0.001932 Jy/beam ! Combined flux in latest and established models = 0.694705 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 116 components and 0.694705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070059Jy sigma=1.314303 ! Fit after self-cal, rms=0.069839Jy sigma=1.310687 ! Inverting map ! Added new window around map position (2.8, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104865 Jy ! Component: 100 - total flux cleaned = 0.0171294 Jy ! Component: 150 - total flux cleaned = 0.0209671 Jy ! Component: 200 - total flux cleaned = 0.0238772 Jy ! Total flux subtracted in 200 components = 0.0238772 Jy ! Clean residual min=-0.006983 max=0.008041 Jy/beam ! Clean residual mean=-0.000005 rms=0.001639 Jy/beam ! Combined flux in latest and established models = 0.718582 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 151 components and 0.718582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067657Jy sigma=1.267772 ! Fit after self-cal, rms=0.067537Jy sigma=1.265599 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8284 x 1.999 at -3.211 degrees (North through East) ! Clean map min=-0.0067616 max=0.2598 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.00 KP 1.00 ! LA 1.00 MK 1.01 NL 1.06 OV 0.92 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.02 KP 1.00 ! LA 1.00 MK 1.02 NL 1.06 OV 0.93 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 1.01 KP 0.99 ! LA 1.00 MK 1.01 NL 1.07 OV 0.93 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.01 KP 0.99 ! LA 1.01 MK 1.02 NL 1.05 OV 0.92 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.01 KP 1.00 ! LA 1.01 MK 1.01 NL 1.07 OV 0.93 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 1.02 KP 0.99 ! LA 1.01 MK 1.01 NL 1.07 OV 0.93 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 1.02 KP 0.99 ! LA 1.01 MK 1.01 NL 1.08 OV 0.94 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 1.01 KP 1.00 ! LA 1.02 MK 1.01 NL 1.08 OV 0.93 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.02 KP 0.99 ! LA 1.02 MK 1.02 NL 1.07 OV 0.93 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.99 KP 1.02 ! LA 1.02 MK 1.02 NL 1.09 OV 0.93 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.05 KP 1.02 ! LA 1.01 MK 0.99 NL 1.09 OV 0.93 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 1.05 KP 0.98 ! LA 1.03 MK 1.01 NL 1.07 OV 0.94 ! PT 0.96 SC 0.99 ! ! ! Fit before self-cal, rms=0.067537Jy sigma=1.265599 ! Fit after self-cal, rms=0.063488Jy sigma=1.177131 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8293 mas, bmaj=2.005 mas, bpa=-2.894 degrees ! Estimated noise=0.176585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00350108 Jy ! Component: 100 - total flux cleaned = -0.0048386 Jy ! Component: 150 - total flux cleaned = -0.00555297 Jy ! Component: 200 - total flux cleaned = -0.00621422 Jy ! Total flux subtracted in 200 components = -0.00621422 Jy ! Clean residual min=-0.003598 max=0.004674 Jy/beam ! Clean residual mean=-0.000002 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.712368 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 174 components and 0.712368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063014Jy sigma=1.166546 ! Fit after self-cal, rms=0.062964Jy sigma=1.165595 ! Inverting map ! Added new window around map position (-2.4, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106379 Jy ! Component: 100 - total flux cleaned = 0.000610654 Jy ! Component: 150 - total flux cleaned = 0.00103789 Jy ! Component: 200 - total flux cleaned = 0.00125995 Jy ! Total flux subtracted in 200 components = 0.00125995 Jy ! Clean residual min=-0.003203 max=0.003303 Jy/beam ! Clean residual mean=-0.000002 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.713628 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 193 components and 0.713628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062606Jy sigma=1.158684 ! Fit after self-cal, rms=0.062577Jy sigma=1.158288 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062577Jy sigma=1.158288 ! Fit after self-cal, rms=0.062017Jy sigma=1.145628 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8268 mas, bmaj=2.003 mas, bpa=-2.743 degrees ! Estimated noise=0.17659 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375464 Jy ! Component: 100 - total flux cleaned = -0.000613699 Jy ! Component: 150 - total flux cleaned = -0.000612118 Jy ! Component: 200 - total flux cleaned = -0.00073221 Jy ! Total flux subtracted in 200 components = -0.00073221 Jy ! Clean residual min=-0.002341 max=0.002690 Jy/beam ! Clean residual mean=-0.000000 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.712896 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 208 components and 0.712896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061823Jy sigma=1.141625 ! Fit after self-cal, rms=0.061808Jy sigma=1.141402 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.4, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000853838 Jy ! Component: 100 - total flux cleaned = 0.00065214 Jy ! Component: 150 - total flux cleaned = 0.000357069 Jy ! Component: 200 - total flux cleaned = 9.10286e-05 Jy ! Total flux subtracted in 200 components = 9.10286e-05 Jy ! Clean residual min=-0.002236 max=0.002075 Jy/beam ! Clean residual mean=-0.000000 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.712987 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 226 components and 0.712987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061656Jy sigma=1.138586 ! Fit after self-cal, rms=0.061639Jy sigma=1.138401 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061639Jy sigma=1.138401 ! Fit after self-cal, rms=0.061611Jy sigma=1.136164 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8259 mas, bmaj=2.003 mas, bpa=-2.676 degrees ! Estimated noise=0.176791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000571402 Jy ! Component: 100 - total flux cleaned = -0.00117775 Jy ! Component: 150 - total flux cleaned = -0.00159697 Jy ! Component: 200 - total flux cleaned = -0.00192782 Jy ! Total flux subtracted in 200 components = -0.00192782 Jy ! Clean residual min=-0.002181 max=0.001820 Jy/beam ! Clean residual mean=-0.000000 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.711059 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 234 components and 0.711059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061511Jy sigma=1.134070 ! Fit after self-cal, rms=0.061498Jy sigma=1.133939 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.7721e-05 Jy ! Component: 100 - total flux cleaned = -0.000212917 Jy ! Component: 150 - total flux cleaned = -0.000413989 Jy ! Component: 200 - total flux cleaned = -0.000489284 Jy ! Total flux subtracted in 200 components = -0.000489284 Jy ! Clean residual min=-0.002137 max=0.001790 Jy/beam ! Clean residual mean=-0.000000 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.710569 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 243 components and 0.71057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061443Jy sigma=1.132813 ! Fit after self-cal, rms=0.061430Jy sigma=1.132682 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061430Jy sigma=1.132682 ! Fit after self-cal, rms=0.061399Jy sigma=1.132332 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.107 mas, bmaj=3.253 mas, bpa=-5.42 degrees ! Estimated noise=0.244179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00165892 Jy ! Component: 100 - total flux cleaned = -0.0017134 Jy ! Component: 150 - total flux cleaned = -0.00183526 Jy ! Component: 200 - total flux cleaned = -0.0020058 Jy ! Total flux subtracted in 200 components = -0.0020058 Jy ! Clean residual min=-0.002095 max=0.002376 Jy/beam ! Clean residual mean=0.000000 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.708564 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 256 components and 0.708564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061358Jy sigma=1.131634 ! Fit after self-cal, rms=0.061341Jy sigma=1.131448 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178707 Jy ! Component: 100 - total flux cleaned = 0.00240832 Jy ! Component: 150 - total flux cleaned = 0.00276367 Jy ! Component: 200 - total flux cleaned = 0.00285107 Jy ! Total flux subtracted in 200 components = 0.00285107 Jy ! Clean residual min=-0.001606 max=0.001663 Jy/beam ! Clean residual mean=-0.000000 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.711415 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 302 components and 0.711415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061276Jy sigma=1.130364 ! Fit after self-cal, rms=0.061266Jy sigma=1.130229 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8252 mas, bmaj=2.002 mas, bpa=-2.635 degrees ! Estimated noise=0.176906 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8252 x 2.002 at -2.635 degrees (North through East) ! Clean map min=-0.002685 max=0.2581 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6641 mas, bmaj=1.715 mas, bpa=-3.219 degrees ! Estimated noise=0.317396 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.221333 Jy ! Component: 100 - total flux cleaned = 0.327822 Jy ! Component: 150 - total flux cleaned = 0.399639 Jy ! Component: 200 - total flux cleaned = 0.452183 Jy ! Total flux subtracted in 200 components = 0.452183 Jy ! Clean residual min=-0.016719 max=0.030858 Jy/beam ! Clean residual mean=-0.000010 rms=0.003396 Jy/beam ! Combined flux in latest and established models = 0.452183 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.452183 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8252 mas, bmaj=2.002 mas, bpa=-2.635 degrees ! Estimated noise=0.176906 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0743941 Jy ! Component: 100 - total flux cleaned = 0.122808 Jy ! Component: 150 - total flux cleaned = 0.156152 Jy ! Component: 200 - total flux cleaned = 0.179745 Jy ! Total flux subtracted in 200 components = 0.179745 Jy ! Clean residual min=-0.005239 max=0.013297 Jy/beam ! Clean residual mean=-0.000005 rms=0.001900 Jy/beam ! Combined flux in latest and established models = 0.631928 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 63 components and 0.631928 Jy ! Inverting map ! Added new window around map position (1.2, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016829 Jy ! Component: 100 - total flux cleaned = 0.0290763 Jy ! Component: 150 - total flux cleaned = 0.0382616 Jy ! Component: 200 - total flux cleaned = 0.0454148 Jy ! Total flux subtracted in 200 components = 0.0454148 Jy ! Clean residual min=-0.003491 max=0.004624 Jy/beam ! Clean residual mean=-0.000002 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.677343 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 110 components and 0.677343 Jy ! Inverting map ! Added new window around map position (1, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00580292 Jy ! Component: 100 - total flux cleaned = 0.0105168 Jy ! Component: 150 - total flux cleaned = 0.0144317 Jy ! Component: 200 - total flux cleaned = 0.0177472 Jy ! Total flux subtracted in 200 components = 0.0177472 Jy ! Clean residual min=-0.002905 max=0.002815 Jy/beam ! Clean residual mean=-0.000001 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.69509 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 148 components and 0.69509 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.107 mas, bmaj=3.253 mas, bpa=-5.42 degrees ! Estimated noise=0.244179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049305 Jy ! Component: 100 - total flux cleaned = 0.00828375 Jy ! Component: 150 - total flux cleaned = 0.0106253 Jy ! Component: 200 - total flux cleaned = 0.0119456 Jy ! Total flux subtracted in 200 components = 0.0119456 Jy ! Clean residual min=-0.002508 max=0.002617 Jy/beam ! Clean residual mean=-0.000001 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.707035 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.4, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167056 Jy ! Component: 100 - total flux cleaned = 0.00187901 Jy ! Component: 150 - total flux cleaned = 0.00219348 Jy ! Component: 200 - total flux cleaned = 0.00230941 Jy ! Total flux subtracted in 200 components = 0.00230941 Jy ! Clean residual min=-0.002195 max=0.002005 Jy/beam ! Clean residual mean=-0.000000 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.709345 Jy ! Adding 104 model components to the UV plane model. ! The established model now contains 236 components and 0.709345 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8252 mas, bmaj=2.002 mas, bpa=-2.635 degrees ! Estimated noise=0.176906 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138417 Jy ! Component: 100 - total flux cleaned = 0.000140785 Jy ! Component: 150 - total flux cleaned = 7.61753e-05 Jy ! Component: 200 - total flux cleaned = 0.000207205 Jy ! Total flux subtracted in 200 components = 0.000207205 Jy ! Clean residual min=-0.002107 max=0.001973 Jy/beam ! Clean residual mean=-0.000000 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.709552 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 268 components and 0.709552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061354Jy sigma=1.131844 ! Fit after self-cal, rms=0.061286Jy sigma=1.130868 wmodel J0459+0229_X_map.mod ! Writing 268 model components to file: J0459+0229_X_map.mod wobs J0459+0229_X_uvs.fits ! Writing UV FITS file: J0459+0229_X_uvs.fits wwins J0459+0229_X_map.win ! wwins: Wrote 11 windows to J0459+0229_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000528312 Jy ! Component: 100 - total flux cleaned = -0.000932491 Jy ! Component: 150 - total flux cleaned = -0.00122729 Jy ! Component: 200 - total flux cleaned = -0.00136907 Jy ! Component: 250 - total flux cleaned = -0.00147867 Jy ! Component: 300 - total flux cleaned = -0.0015583 Jy ! Component: 350 - total flux cleaned = -0.00155899 Jy ! Component: 400 - total flux cleaned = -0.00155927 Jy ! Component: 450 - total flux cleaned = -0.00160814 Jy ! Component: 500 - total flux cleaned = -0.00158454 Jy ! Component: 550 - total flux cleaned = -0.00163142 Jy ! Component: 600 - total flux cleaned = -0.00160825 Jy ! Component: 650 - total flux cleaned = -0.0015856 Jy ! Component: 700 - total flux cleaned = -0.00162975 Jy ! Component: 750 - total flux cleaned = -0.00165134 Jy ! Component: 800 - total flux cleaned = -0.00167302 Jy ! Component: 850 - total flux cleaned = -0.00169419 Jy ! Component: 900 - total flux cleaned = -0.00171461 Jy ! Component: 950 - total flux cleaned = -0.00171466 Jy ! Component: 1000 - total flux cleaned = -0.00179479 Jy ! Component: 1050 - total flux cleaned = -0.00185415 Jy ! Component: 1100 - total flux cleaned = -0.00187346 Jy ! Component: 1150 - total flux cleaned = -0.00191172 Jy ! Component: 1200 - total flux cleaned = -0.00193039 Jy ! Component: 1250 - total flux cleaned = -0.0019675 Jy ! Component: 1300 - total flux cleaned = -0.00189367 Jy ! Component: 1350 - total flux cleaned = -0.00193022 Jy ! Component: 1400 - total flux cleaned = -0.00194844 Jy ! Component: 1450 - total flux cleaned = -0.00198403 Jy ! Component: 1500 - total flux cleaned = -0.00201898 Jy ! Component: 1550 - total flux cleaned = -0.00205316 Jy ! Component: 1600 - total flux cleaned = -0.00203551 Jy ! Component: 1650 - total flux cleaned = -0.00200151 Jy ! Component: 1700 - total flux cleaned = -0.00200146 Jy ! Component: 1750 - total flux cleaned = -0.00201814 Jy ! Component: 1800 - total flux cleaned = -0.00201855 Jy ! Component: 1850 - total flux cleaned = -0.00200245 Jy ! Component: 1900 - total flux cleaned = -0.00200239 Jy ! Component: 1950 - total flux cleaned = -0.00201812 Jy ! Component: 2000 - total flux cleaned = -0.00203373 Jy ! Component: 2050 - total flux cleaned = -0.00197208 Jy ! Component: 2100 - total flux cleaned = -0.00198728 Jy ! Component: 2150 - total flux cleaned = -0.00195711 Jy ! Component: 2200 - total flux cleaned = -0.00201651 Jy ! Component: 2250 - total flux cleaned = -0.00197232 Jy ! Component: 2300 - total flux cleaned = -0.00192865 Jy ! Component: 2350 - total flux cleaned = -0.00194308 Jy ! Component: 2400 - total flux cleaned = -0.00199988 Jy ! Component: 2450 - total flux cleaned = -0.00197186 Jy ! Component: 2500 - total flux cleaned = -0.00198571 Jy ! Component: 2550 - total flux cleaned = -0.00188871 Jy ! Component: 2600 - total flux cleaned = -0.00193017 Jy ! Component: 2650 - total flux cleaned = -0.00187549 Jy ! Component: 2700 - total flux cleaned = -0.00188895 Jy ! Component: 2750 - total flux cleaned = -0.00184858 Jy ! Component: 2800 - total flux cleaned = -0.00186173 Jy ! Component: 2850 - total flux cleaned = -0.00180913 Jy ! Component: 2900 - total flux cleaned = -0.00180896 Jy ! Component: 2950 - total flux cleaned = -0.00179595 Jy ! Component: 3000 - total flux cleaned = -0.00170667 Jy ! Component: 3050 - total flux cleaned = -0.00166867 Jy ! Component: 3100 - total flux cleaned = -0.00164363 Jy ! Component: 3150 - total flux cleaned = -0.00159382 Jy ! Component: 3200 - total flux cleaned = -0.00161839 Jy ! Component: 3250 - total flux cleaned = -0.00158163 Jy ! Component: 3300 - total flux cleaned = -0.00149626 Jy ! Component: 3350 - total flux cleaned = -0.00152035 Jy ! Component: 3400 - total flux cleaned = -0.00146035 Jy ! Component: 3450 - total flux cleaned = -0.00142476 Jy ! Component: 3500 - total flux cleaned = -0.00135397 Jy ! Component: 3550 - total flux cleaned = -0.00131881 Jy ! Component: 3600 - total flux cleaned = -0.00131877 Jy ! Component: 3650 - total flux cleaned = -0.00122651 Jy ! Component: 3700 - total flux cleaned = -0.00127231 Jy ! Component: 3750 - total flux cleaned = -0.0012041 Jy ! Component: 3800 - total flux cleaned = -0.00114776 Jy ! Component: 3850 - total flux cleaned = -0.00110287 Jy ! Component: 3900 - total flux cleaned = -0.0010361 Jy ! Component: 3950 - total flux cleaned = -0.00106926 Jy ! Component: 4000 - total flux cleaned = -0.000992466 Jy ! Component: 4050 - total flux cleaned = -0.000992511 Jy ! Total flux subtracted in 4096 components = -0.00103569 Jy ! Clean residual min=-0.000608 max=0.000597 Jy/beam ! Clean residual mean=-0.000000 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.708517 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 578 components and 0.708517 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0459+0229_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8252 x 2.002 at -2.635 degrees (North through East) ! Clean map min=-0.0013617 max=0.25453 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0459+0229_X_map.fits wmodel /vlbi/uf001/uva//J0459+0229_X_map.mod ! Writing 578 model components to file: /vlbi/uf001/uva//J0459+0229_X_map.mod wobs /vlbi/uf001/uva//J0459+0229_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0459+0229_X_uvs.fits wwins /vlbi/uf001/uva//J0459+0229_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J0459+0229_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.254527 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000185872 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.219079 0.219079 0.438157 0.876315 1.75263 3.50526 7.01052 14.021 28.0421 56.0841 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.254 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1369.37 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0459+0229_X_dfm.log closed on Sun Jan 13 22:24:20 2019