! Started logfile: /vlbi/uf001/uvm//J0457-2324_X_b_dfm.log on Sun Jan 13 20:47:40 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0457-2324_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0457-2324_X_b_uvm.fits ! AN table 1: 7 integrations on 21 of 21 possible baselines. ! AN table 2: 35 integrations on 28 of 28 possible baselines. ! AN table 3: 14 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.705069 visibilities/baseline/integration-bin. ! Found source: J0457-2324 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 12852 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0457-2324_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 166 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 166 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 166 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 166 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 166 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 166 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 166 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 166 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 166 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 166 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 166 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 166 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.992180Jy sigma=19.130267 ! Fit after self-cal, rms=0.787065Jy sigma=7.270563 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6216 mas, bmaj=3.094 mas, bpa=-20.95 degrees ! Estimated noise=1.2057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.17783 Jy ! Component: 100 - total flux cleaned = 1.49944 Jy ! Total flux subtracted in 100 components = 1.49944 Jy ! Clean residual min=-0.050223 max=0.149973 Jy/beam ! Clean residual mean=0.000003 rms=0.011574 Jy/beam ! Combined flux in latest and established models = 1.49944 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.49944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.400769Jy sigma=3.664198 ! Fit after self-cal, rms=0.400396Jy sigma=3.661239 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1749 Jy ! Component: 100 - total flux cleaned = 0.275905 Jy ! Total flux subtracted in 100 components = 0.275905 Jy ! Clean residual min=-0.027917 max=0.066057 Jy/beam ! Clean residual mean=-0.000007 rms=0.006997 Jy/beam ! Combined flux in latest and established models = 1.77535 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 1.77535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.250890Jy sigma=2.297258 ! Fit after self-cal, rms=0.250250Jy sigma=2.291612 ! Inverting map ! Added new window around map position (1.4, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0700969 Jy ! Component: 100 - total flux cleaned = 0.118046 Jy ! Total flux subtracted in 100 components = 0.118046 Jy ! Clean residual min=-0.026271 max=0.044616 Jy/beam ! Clean residual mean=-0.000007 rms=0.005826 Jy/beam ! Combined flux in latest and established models = 1.89339 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 1.89339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.208271Jy sigma=1.915294 ! Fit after self-cal, rms=0.207679Jy sigma=1.909620 ! Inverting map ! Added new window around map position (-1.6, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0439721 Jy ! Component: 100 - total flux cleaned = 0.0786812 Jy ! Total flux subtracted in 100 components = 0.0786812 Jy ! Clean residual min=-0.023971 max=0.027945 Jy/beam ! Clean residual mean=-0.000007 rms=0.005232 Jy/beam ! Combined flux in latest and established models = 1.97208 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 48 components and 1.97208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.184326Jy sigma=1.708498 ! Fit after self-cal, rms=0.184175Jy sigma=1.707031 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8319 mas, bmaj=3.396 mas, bpa=-19.18 degrees ! Estimated noise=0.880712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0592559 Jy ! Component: 100 - total flux cleaned = 0.10207 Jy ! Component: 150 - total flux cleaned = 0.134179 Jy ! Component: 200 - total flux cleaned = 0.15864 Jy ! Total flux subtracted in 200 components = 0.15864 Jy ! Clean residual min=-0.030869 max=0.030861 Jy/beam ! Clean residual mean=-0.000037 rms=0.005936 Jy/beam ! Combined flux in latest and established models = 2.13072 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 95 components and 2.13072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.153308Jy sigma=1.455009 ! Fit after self-cal, rms=0.153187Jy sigma=1.453736 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8319 x 3.396 at -19.18 degrees (North through East) ! Clean map min=-0.029582 max=1.6195 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.01 KP 1.04 LA 0.98 ! NL 1.12 PT 0.93 SC 0.89 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 HN 1.13 KP 1.00 ! LA 0.99 MK 1.00 NL 1.00 PT 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.99 HN 1.05 KP 1.02 ! LA 1.02 MK 1.01 NL 0.96 OV 0.90 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.02 KP 1.05 LA 1.00 ! NL 1.15 PT 0.95 SC 0.87 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 HN 1.10 KP 1.01 ! LA 1.00 MK 1.01 NL 1.00 PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 1.00 HN 1.05 KP 1.03 ! LA 1.00 MK 1.00 NL 0.96 OV 0.89 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.02 KP 1.05 LA 0.98 ! NL 1.18 PT 0.95 SC 0.86 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 HN 1.10 KP 1.00 ! LA 1.01 MK 1.01 NL 1.01 PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 1.00 HN 1.06 KP 1.02 ! LA 1.03 MK 1.01 NL 0.96 OV 0.91 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.01 KP 1.03 LA 0.98 ! NL 1.12 PT 0.96 SC 0.89 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.96 HN 1.11 KP 1.01 ! LA 1.01 MK 0.98 NL 1.01 PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.99 HN 1.07 KP 1.02 ! LA 1.01 MK 1.01 NL 0.97 OV 0.91 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.01 KP 1.03 LA 0.99 ! NL 1.16 PT 0.95 SC 0.89 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.98 HN 1.11 KP 1.00 ! LA 1.01 MK 1.01 NL 1.00 PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 1.00 HN 1.05 KP 1.03 ! LA 1.01 MK 1.02 NL 0.97 OV 0.91 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.02 KP 1.03 LA 0.99 ! NL 1.14 PT 0.94 SC 0.89 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 HN 1.09 KP 1.01 ! LA 1.01 MK 1.00 NL 0.99 PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 1.00 HN 1.05 KP 1.02 ! LA 1.02 MK 1.02 NL 0.97 OV 0.91 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.03 KP 1.02 LA 0.98 ! NL 1.18 PT 0.96 SC 0.88 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.98 HN 1.09 KP 1.01 ! LA 1.00 MK 1.01 NL 1.01 PT 0.91 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 1.00 HN 1.09 KP 1.04 ! LA 1.02 MK 1.01 NL 0.97 OV 0.90 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.02 KP 1.03 LA 0.99 ! NL 1.16 PT 0.94 SC 0.87 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.98 HN 1.12 KP 1.00 ! LA 1.00 MK 1.00 NL 1.02 PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.00 HN 1.07 KP 1.02 ! LA 1.02 MK 1.02 NL 0.97 OV 0.90 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.02 KP 1.02 LA 1.01 ! NL 1.16 PT 0.94 SC 0.88 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.98 HN 1.13 KP 1.01 ! LA 1.01 MK 1.00 NL 1.00 PT 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.00 HN 1.07 KP 1.04 ! LA 1.00 MK 1.03 NL 0.98 OV 0.91 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.03 KP 1.04 LA 1.02 ! NL 1.16 PT 0.94 SC 0.89 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.99 HN 1.10 KP 1.01 ! LA 1.02 MK 1.01 NL 1.02 PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 1.02 HN 1.06 KP 1.03 ! LA 1.01 MK 1.03 NL 0.97 OV 0.93 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.03 KP 1.03 LA 1.01 ! NL 1.11 PT 0.95 SC 0.89 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.97 HN 1.11 KP 1.01 ! LA 1.01 MK 1.02 NL 1.01 PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 1.00 HN 1.05 KP 1.02 ! LA 1.02 MK 1.04 NL 0.96 OV 0.92 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.01 KP 1.04 LA 1.00 ! NL 1.16 PT 0.95 SC 0.91 ! ! A total of 24 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.97 HN 1.12 KP 0.99 ! LA 1.03 MK 1.00 NL 1.00 PT 0.93 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 1.01 HN 1.07 KP 1.03 ! LA 1.02 MK 1.04 NL 0.98 OV 0.91 ! ! ! Fit before self-cal, rms=0.153187Jy sigma=1.453736 ! Fit after self-cal, rms=0.103679Jy sigma=0.948713 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8312 mas, bmaj=3.406 mas, bpa=-19.8 degrees ! Estimated noise=0.899338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0122447 Jy ! Component: 100 - total flux cleaned = -0.0140543 Jy ! Component: 150 - total flux cleaned = -0.01517 Jy ! Component: 200 - total flux cleaned = -0.0160736 Jy ! Total flux subtracted in 200 components = -0.0160736 Jy ! Clean residual min=-0.015188 max=0.011094 Jy/beam ! Clean residual mean=-0.000011 rms=0.002826 Jy/beam ! Combined flux in latest and established models = 2.11464 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 112 components and 2.11464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099191Jy sigma=0.910241 ! Fit after self-cal, rms=0.099162Jy sigma=0.909514 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099162Jy sigma=0.909514 ! Fit after self-cal, rms=0.092187Jy sigma=0.835068 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8314 mas, bmaj=3.407 mas, bpa=-19.86 degrees ! Estimated noise=0.90029 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00755699 Jy ! Component: 100 - total flux cleaned = -0.00945655 Jy ! Component: 150 - total flux cleaned = -0.0115008 Jy ! Component: 200 - total flux cleaned = -0.0129894 Jy ! Total flux subtracted in 200 components = -0.0129894 Jy ! Clean residual min=-0.012347 max=0.009467 Jy/beam ! Clean residual mean=-0.000009 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 2.10165 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 123 components and 2.10165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090077Jy sigma=0.815401 ! Fit after self-cal, rms=0.090066Jy sigma=0.815176 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000976339 Jy ! Component: 100 - total flux cleaned = -0.00131245 Jy ! Component: 150 - total flux cleaned = -0.00161617 Jy ! Component: 200 - total flux cleaned = -0.00175115 Jy ! Total flux subtracted in 200 components = -0.00175115 Jy ! Clean residual min=-0.012101 max=0.009570 Jy/beam ! Clean residual mean=-0.000009 rms=0.002272 Jy/beam ! Combined flux in latest and established models = 2.0999 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 127 components and 2.0999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089547Jy sigma=0.810389 ! Fit after self-cal, rms=0.089537Jy sigma=0.810244 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089537Jy sigma=0.810244 ! Fit after self-cal, rms=0.077920Jy sigma=0.702405 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8314 mas, bmaj=3.414 mas, bpa=-19.9 degrees ! Estimated noise=0.900734 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00826614 Jy ! Component: 100 - total flux cleaned = -0.011161 Jy ! Component: 150 - total flux cleaned = -0.0118875 Jy ! Component: 200 - total flux cleaned = -0.011589 Jy ! Total flux subtracted in 200 components = -0.011589 Jy ! Clean residual min=-0.007615 max=0.005740 Jy/beam ! Clean residual mean=-0.000006 rms=0.001522 Jy/beam ! Combined flux in latest and established models = 2.08831 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 151 components and 2.08831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076715Jy sigma=0.690890 ! Fit after self-cal, rms=0.076704Jy sigma=0.690724 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171773 Jy ! Component: 100 - total flux cleaned = 0.000200242 Jy ! Component: 150 - total flux cleaned = 0.000421996 Jy ! Component: 200 - total flux cleaned = 0.000731432 Jy ! Total flux subtracted in 200 components = 0.000731432 Jy ! Clean residual min=-0.007423 max=0.005579 Jy/beam ! Clean residual mean=-0.000006 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 2.08904 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 158 components and 2.08904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076371Jy sigma=0.687511 ! Fit after self-cal, rms=0.076366Jy sigma=0.687466 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076366Jy sigma=0.687466 ! Fit after self-cal, rms=0.075661Jy sigma=0.682438 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.054 mas, bmaj=4.891 mas, bpa=-6.781 degrees ! Estimated noise=1.21202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00812921 Jy ! Component: 100 - total flux cleaned = -0.0116713 Jy ! Component: 150 - total flux cleaned = -0.0123867 Jy ! Component: 200 - total flux cleaned = -0.0124697 Jy ! Total flux subtracted in 200 components = -0.0124697 Jy ! Clean residual min=-0.010971 max=0.006716 Jy/beam ! Clean residual mean=-0.000010 rms=0.002124 Jy/beam ! Combined flux in latest and established models = 2.07657 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 183 components and 2.07657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075208Jy sigma=0.679125 ! Fit after self-cal, rms=0.075201Jy sigma=0.678937 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000484573 Jy ! Component: 100 - total flux cleaned = -0.000622149 Jy ! Component: 150 - total flux cleaned = -0.000621413 Jy ! Component: 200 - total flux cleaned = -0.000678584 Jy ! Total flux subtracted in 200 components = -0.000678584 Jy ! Clean residual min=-0.010824 max=0.006456 Jy/beam ! Clean residual mean=-0.000010 rms=0.002095 Jy/beam ! Combined flux in latest and established models = 2.0759 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 187 components and 2.07589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075097Jy sigma=0.677925 ! Fit after self-cal, rms=0.075097Jy sigma=0.677817 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8313 mas, bmaj=3.414 mas, bpa=-19.91 degrees ! Estimated noise=0.900318 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8313 x 3.414 at -19.91 degrees (North through East) ! Clean map min=-0.0068795 max=1.6202 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075097Jy sigma=0.677817 ! Fit after self-cal, rms=0.070771Jy sigma=0.626230 ! Inverting map and beam ! Estimated beam: bmin=0.8318 mas, bmaj=3.414 mas, bpa=-19.9 degrees ! Estimated noise=0.900089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00633605 Jy ! Component: 100 - total flux cleaned = -0.00809978 Jy ! Component: 150 - total flux cleaned = -0.00845157 Jy ! Component: 200 - total flux cleaned = -0.00845267 Jy ! Total flux subtracted in 200 components = -0.00845267 Jy ! Clean residual min=-0.006645 max=0.005004 Jy/beam ! Clean residual mean=-0.000004 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 2.06744 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 195 components and 2.06744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070109Jy sigma=0.619640 ! Fit after self-cal, rms=0.070098Jy sigma=0.619588 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107062 Jy ! Component: 100 - total flux cleaned = 0.000189532 Jy ! Component: 150 - total flux cleaned = 0.000267398 Jy ! Component: 200 - total flux cleaned = 0.000342086 Jy ! Total flux subtracted in 200 components = 0.000342086 Jy ! Clean residual min=-0.006492 max=0.004908 Jy/beam ! Clean residual mean=-0.000004 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 2.06778 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 200 components and 2.06778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069936Jy sigma=0.617987 ! Fit after self-cal, rms=0.069933Jy sigma=0.617970 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069933Jy sigma=0.617970 ! Fit after self-cal, rms=0.069492Jy sigma=0.614892 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6284 mas, bmaj=3.107 mas, bpa=-21.23 degrees ! Estimated noise=1.21868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.18721 Jy ! Component: 100 - total flux cleaned = 1.50195 Jy ! Component: 150 - total flux cleaned = 1.6688 Jy ! Component: 200 - total flux cleaned = 1.76467 Jy ! Total flux subtracted in 200 components = 1.76467 Jy ! Clean residual min=-0.017471 max=0.047892 Jy/beam ! Clean residual mean=-0.000000 rms=0.004128 Jy/beam ! Combined flux in latest and established models = 1.76467 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.76467 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8318 mas, bmaj=3.414 mas, bpa=-19.91 degrees ! Estimated noise=0.899776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0931185 Jy ! Component: 100 - total flux cleaned = 0.147901 Jy ! Component: 150 - total flux cleaned = 0.184131 Jy ! Component: 200 - total flux cleaned = 0.209726 Jy ! Total flux subtracted in 200 components = 0.209726 Jy ! Clean residual min=-0.008109 max=0.014494 Jy/beam ! Clean residual mean=-0.000027 rms=0.002524 Jy/beam ! Combined flux in latest and established models = 1.9744 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 66 components and 1.9744 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188669 Jy ! Component: 100 - total flux cleaned = 0.0331669 Jy ! Component: 150 - total flux cleaned = 0.0442185 Jy ! Component: 200 - total flux cleaned = 0.052865 Jy ! Total flux subtracted in 200 components = 0.052865 Jy ! Clean residual min=-0.005699 max=0.007086 Jy/beam ! Clean residual mean=-0.000013 rms=0.001423 Jy/beam ! Combined flux in latest and established models = 2.02726 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 129 components and 2.02726 Jy ! Inverting map ! Added new window around map position (8.8, -19.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0075192 Jy ! Component: 100 - total flux cleaned = 0.0132605 Jy ! Component: 150 - total flux cleaned = 0.0179382 Jy ! Component: 200 - total flux cleaned = 0.0218016 Jy ! Total flux subtracted in 200 components = 0.0218016 Jy ! Clean residual min=-0.005462 max=0.004974 Jy/beam ! Clean residual mean=-0.000008 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 2.04907 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 165 components and 2.04907 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.059 mas, bmaj=4.891 mas, bpa=-6.746 degrees ! Estimated noise=1.21009 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00495246 Jy ! Component: 100 - total flux cleaned = 0.00795656 Jy ! Component: 150 - total flux cleaned = 0.00926523 Jy ! Component: 200 - total flux cleaned = 0.00970411 Jy ! Total flux subtracted in 200 components = 0.00970411 Jy ! Clean residual min=-0.007485 max=0.005691 Jy/beam ! Clean residual mean=-0.000009 rms=0.001721 Jy/beam ! Combined flux in latest and established models = 2.05877 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331227 Jy ! Component: 100 - total flux cleaned = 0.000576233 Jy ! Component: 150 - total flux cleaned = 0.000807541 Jy ! Component: 200 - total flux cleaned = 0.00102476 Jy ! Total flux subtracted in 200 components = 0.00102476 Jy ! Clean residual min=-0.007676 max=0.005622 Jy/beam ! Clean residual mean=-0.000008 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 2.05979 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 197 components and 2.05979 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8318 mas, bmaj=3.414 mas, bpa=-19.91 degrees ! Estimated noise=0.899776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.82186e-05 Jy ! Component: 100 - total flux cleaned = 0.000428657 Jy ! Component: 150 - total flux cleaned = 0.000759886 Jy ! Component: 200 - total flux cleaned = 0.0010715 Jy ! Total flux subtracted in 200 components = 0.0010715 Jy ! Clean residual min=-0.005221 max=0.004163 Jy/beam ! Clean residual mean=-0.000003 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 2.06087 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 217 components and 2.06087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068528Jy sigma=0.605828 ! Fit after self-cal, rms=0.068461Jy sigma=0.605011 wmodel J0457-2324_X_b_map.mod ! Writing 217 model components to file: J0457-2324_X_b_map.mod wobs J0457-2324_X_b_uvs.fits ! Writing UV FITS file: J0457-2324_X_b_uvs.fits wwins J0457-2324_X_b_map.win ! wwins: Wrote 4 windows to J0457-2324_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00233512 Jy ! Component: 100 - total flux cleaned = -0.00409275 Jy ! Component: 150 - total flux cleaned = -0.00518849 Jy ! Component: 200 - total flux cleaned = -0.00600457 Jy ! Component: 250 - total flux cleaned = -0.00685502 Jy ! Component: 300 - total flux cleaned = -0.00760517 Jy ! Component: 350 - total flux cleaned = -0.00839298 Jy ! Component: 400 - total flux cleaned = -0.00902682 Jy ! Component: 450 - total flux cleaned = -0.00958055 Jy ! Component: 500 - total flux cleaned = -0.0101185 Jy ! Component: 550 - total flux cleaned = -0.0102949 Jy ! Component: 600 - total flux cleaned = -0.0107519 Jy ! Component: 650 - total flux cleaned = -0.0111411 Jy ! Component: 700 - total flux cleaned = -0.0113587 Jy ! Component: 750 - total flux cleaned = -0.011466 Jy ! Component: 800 - total flux cleaned = -0.0117296 Jy ! Component: 850 - total flux cleaned = -0.0117824 Jy ! Component: 900 - total flux cleaned = -0.0121405 Jy ! Component: 950 - total flux cleaned = -0.0122395 Jy ! Component: 1000 - total flux cleaned = -0.0122388 Jy ! Component: 1050 - total flux cleaned = -0.0122878 Jy ! Component: 1100 - total flux cleaned = -0.0123852 Jy ! Component: 1150 - total flux cleaned = -0.0125286 Jy ! Component: 1200 - total flux cleaned = -0.0125757 Jy ! Component: 1250 - total flux cleaned = -0.0125298 Jy ! Component: 1300 - total flux cleaned = -0.012622 Jy ! Component: 1350 - total flux cleaned = -0.0127129 Jy ! Component: 1400 - total flux cleaned = -0.0127131 Jy ! Component: 1450 - total flux cleaned = -0.0127129 Jy ! Component: 1500 - total flux cleaned = -0.0128873 Jy ! Component: 1550 - total flux cleaned = -0.0128876 Jy ! Component: 1600 - total flux cleaned = -0.0129734 Jy ! Component: 1650 - total flux cleaned = -0.0131849 Jy ! Component: 1700 - total flux cleaned = -0.013185 Jy ! Component: 1750 - total flux cleaned = -0.0133508 Jy ! Component: 1800 - total flux cleaned = -0.0135145 Jy ! Component: 1850 - total flux cleaned = -0.0137173 Jy ! Component: 1900 - total flux cleaned = -0.0139978 Jy ! Component: 1950 - total flux cleaned = -0.0140767 Jy ! Component: 2000 - total flux cleaned = -0.0141948 Jy ! Component: 2050 - total flux cleaned = -0.0143117 Jy ! Component: 2100 - total flux cleaned = -0.0145435 Jy ! Component: 2150 - total flux cleaned = -0.0145445 Jy ! Component: 2200 - total flux cleaned = -0.0147722 Jy ! Component: 2250 - total flux cleaned = -0.0149978 Jy ! Component: 2300 - total flux cleaned = -0.0151095 Jy ! Component: 2350 - total flux cleaned = -0.0154053 Jy ! Component: 2400 - total flux cleaned = -0.0156248 Jy ! Component: 2450 - total flux cleaned = -0.0157333 Jy ! Component: 2500 - total flux cleaned = -0.0158419 Jy ! Component: 2550 - total flux cleaned = -0.0160561 Jy ! Component: 2600 - total flux cleaned = -0.0162685 Jy ! Component: 2650 - total flux cleaned = -0.0164092 Jy ! Component: 2700 - total flux cleaned = -0.0164439 Jy ! Component: 2750 - total flux cleaned = -0.0165824 Jy ! Component: 2800 - total flux cleaned = -0.0164451 Jy ! Component: 2850 - total flux cleaned = -0.0167184 Jy ! Component: 2900 - total flux cleaned = -0.0166845 Jy ! Component: 2950 - total flux cleaned = -0.0166848 Jy ! Component: 3000 - total flux cleaned = -0.0167854 Jy ! Component: 3050 - total flux cleaned = -0.0168516 Jy ! Component: 3100 - total flux cleaned = -0.017016 Jy ! Component: 3150 - total flux cleaned = -0.0170488 Jy ! Component: 3200 - total flux cleaned = -0.0170813 Jy ! Component: 3250 - total flux cleaned = -0.017178 Jy ! Component: 3300 - total flux cleaned = -0.017242 Jy ! Component: 3350 - total flux cleaned = -0.0172101 Jy ! Component: 3400 - total flux cleaned = -0.0173683 Jy ! Component: 3450 - total flux cleaned = -0.0176196 Jy ! Component: 3500 - total flux cleaned = -0.0174637 Jy ! Component: 3550 - total flux cleaned = -0.0177428 Jy ! Component: 3600 - total flux cleaned = -0.0178656 Jy ! Component: 3650 - total flux cleaned = -0.0179574 Jy ! Component: 3700 - total flux cleaned = -0.018079 Jy ! Component: 3750 - total flux cleaned = -0.0181088 Jy ! Component: 3800 - total flux cleaned = -0.018169 Jy ! Component: 3850 - total flux cleaned = -0.0183478 Jy ! Component: 3900 - total flux cleaned = -0.0183772 Jy ! Component: 3950 - total flux cleaned = -0.0183776 Jy ! Component: 4000 - total flux cleaned = -0.0185531 Jy ! Component: 4050 - total flux cleaned = -0.0185825 Jy ! Total flux subtracted in 4096 components = -0.0186982 Jy ! Clean residual min=-0.001717 max=0.001593 Jy/beam ! Clean residual mean=-0.000001 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 2.04217 Jy keep ! Adding 390 model components to the UV plane model. ! The established model now contains 607 components and 2.04217 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0457-2324_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8318 x 3.414 at -19.91 degrees (North through East) ! Clean map min=-0.0033321 max=1.6305 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0457-2324_X_b_map.fits wmodel /vlbi/uf001/uvm//J0457-2324_X_b_map.mod ! Writing 607 model components to file: /vlbi/uf001/uvm//J0457-2324_X_b_map.mod wobs /vlbi/uf001/uvm//J0457-2324_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0457-2324_X_b_uvs.fits wwins /vlbi/uf001/uvm//J0457-2324_X_b_map.win ! wwins: Wrote 5 windows to /vlbi/uf001/uvm//J0457-2324_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.63052 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000545047 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.100284 0.100284 0.200567 0.401135 0.80227 1.60454 3.20908 6.41816 12.8363 25.6726 51.3453 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.63 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2991.51 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0457-2324_X_b_dfm.log closed on Sun Jan 13 20:47:45 2019