! Started logfile: /vlbi/uf001/uvm//J0453-3949_X_a_dfm.log on Sun Jan 13 20:47:01 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0453-3949_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0453-3949_X_a_uvm.fits ! AN table 1: 71 integrations on 28 of 28 possible baselines. ! AN table 2: 37 integrations on 15 of 15 possible baselines. ! AN table 3: 36 integrations on 15 of 15 possible baselines. ! AN table 4: 36 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.922636 visibilities/baseline/integration-bin. ! Found source: J0453-3949 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 42504 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0453-3949_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.013472Jy sigma=16.310347 ! Fit after self-cal, rms=0.851226Jy sigma=13.359432 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5562 mas, bmaj=1.745 mas, bpa=-11.47 degrees ! Estimated noise=0.52237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124598 Jy ! Component: 100 - total flux cleaned = 0.148486 Jy ! Total flux subtracted in 100 components = 0.148486 Jy ! Clean residual min=-0.011398 max=0.028237 Jy/beam ! Clean residual mean=0.000065 rms=0.002372 Jy/beam ! Combined flux in latest and established models = 0.148486 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.148486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098982Jy sigma=1.400360 ! Fit after self-cal, rms=0.098844Jy sigma=1.399625 ! Inverting map ! Added new window around map position (-1.6, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236216 Jy ! Component: 100 - total flux cleaned = 0.0264349 Jy ! Total flux subtracted in 100 components = 0.0264349 Jy ! Clean residual min=-0.011302 max=0.024557 Jy/beam ! Clean residual mean=0.000043 rms=0.001819 Jy/beam ! Combined flux in latest and established models = 0.174921 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 9 components and 0.174921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094037Jy sigma=1.313265 ! Fit after self-cal, rms=0.092751Jy sigma=1.283161 ! Inverting map ! Added new window around map position (1, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168387 Jy ! Component: 100 - total flux cleaned = 0.0233033 Jy ! Total flux subtracted in 100 components = 0.0233033 Jy ! Clean residual min=-0.009214 max=0.010140 Jy/beam ! Clean residual mean=0.000024 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.198224 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.198224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089577Jy sigma=1.228346 ! Fit after self-cal, rms=0.089447Jy sigma=1.226091 ! Inverting map ! Added new window around map position (1, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00753543 Jy ! Component: 100 - total flux cleaned = 0.00955222 Jy ! Total flux subtracted in 100 components = 0.00955222 Jy ! Clean residual min=-0.007695 max=0.007261 Jy/beam ! Clean residual mean=0.000016 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.207776 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.207776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088421Jy sigma=1.212096 ! Fit after self-cal, rms=0.088304Jy sigma=1.210642 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7873 mas, bmaj=2.354 mas, bpa=-11.74 degrees ! Estimated noise=0.222653 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417666 Jy ! Component: 100 - total flux cleaned = 0.00464832 Jy ! Component: 150 - total flux cleaned = 0.00505709 Jy ! Component: 200 - total flux cleaned = 0.00523575 Jy ! Total flux subtracted in 200 components = 0.00523575 Jy ! Clean residual min=-0.007029 max=0.004501 Jy/beam ! Clean residual mean=0.000014 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.213012 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.213012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087843Jy sigma=1.206126 ! Fit after self-cal, rms=0.087776Jy sigma=1.205516 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7873 x 2.354 at -11.74 degrees (North through East) ! Clean map min=-0.0061784 max=0.1447 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.54 KP 1.00 LA 1.00 MK 0.95 ! NL 1.20 OV 0.88 PT 0.94 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.10 KP 0.96 LA 1.06 ! NL 1.16 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 KP 1.04 LA 1.04 MK 0.99 ! NL 1.26 PT 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.96 HN 1.46 KP 1.05 LA 1.13 ! MK 1.03 NL 1.06 OV 0.83 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HN 1.35 KP 0.99 LA 1.00 MK 1.00 ! NL 1.21 OV 0.86 PT 0.94 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.08 KP 1.03 LA 1.02 ! NL 1.09 PT 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 KP 1.03 LA 1.10 MK 0.99 ! NL 1.27 PT 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00 HN 1.44 KP 1.07 LA 1.06 ! MK 1.04 NL 1.03 OV 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HN 1.40 KP 1.00 LA 0.98 MK 0.99 ! NL 1.25 OV 0.85 PT 0.92 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.09 KP 0.98 LA 1.04 ! NL 1.15 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.05 KP 1.01 LA 1.07 MK 0.95 ! NL 1.31 PT 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 HN 1.50 KP 1.07 LA 1.07 ! MK 1.09 NL 1.05 OV 0.83 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HN 1.38 KP 0.96 LA 0.99 MK 1.00 ! NL 1.29 OV 0.86 PT 0.95 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.03 KP 0.98 LA 0.99 ! NL 1.10 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 KP 1.05 LA 1.13 MK 0.93 ! NL 1.25 PT 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 HN 1.42 KP 1.07 LA 1.00 ! MK 1.06 NL 1.04 OV 0.87 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! HN 1.32 KP 0.98 LA 1.00 MK 1.00 ! NL 1.32 OV 0.86 PT 0.94 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.12 KP 0.95 LA 1.09 ! NL 1.07 PT 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 KP 1.03 LA 1.08 MK 0.97 ! NL 1.38 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00 HN 1.55 KP 1.09 LA 1.05 ! MK 1.04 NL 1.11 OV 0.83 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! HN 1.61 KP 1.04 LA 0.99 MK 1.00 ! NL 1.16 OV 0.85 PT 0.94 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 HN 1.10 KP 1.03 LA 1.00 ! NL 1.11 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 KP 1.02 LA 1.09 MK 0.96 ! NL 1.29 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 HN 1.53 KP 1.10 LA 1.05 ! MK 1.05 NL 0.98 OV 0.81 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! HN 1.34 KP 1.01 LA 0.97 MK 1.01 ! NL 1.31 OV 0.87 PT 0.94 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.09 KP 0.99 LA 1.01 ! NL 1.10 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 KP 0.98 LA 1.07 MK 0.99 ! NL 1.34 PT 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.96 HN 1.58 KP 1.11 LA 1.05 ! MK 1.08 NL 1.08 OV 0.83 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! HN 1.47 KP 1.02 LA 1.00 MK 0.99 ! NL 1.15 OV 0.86 PT 0.94 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.02 KP 1.02 LA 1.05 ! NL 1.07 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 KP 1.02 LA 1.06 MK 0.93 ! NL 1.37 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 HN 1.63 KP 1.08 LA 1.07 ! MK 1.09 NL 1.03 OV 0.83 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! HN 1.46 KP 1.00 LA 1.01 MK 1.00 ! NL 1.25 OV 0.85 PT 0.94 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HN 1.18 KP 0.99 LA 1.04 ! NL 1.17 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 KP 1.00 LA 1.05 MK 0.95 ! NL 1.30 PT 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.96 HN 1.59 KP 1.12 LA 1.03 ! MK 1.13 NL 0.96 OV 0.81 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! HN 1.34 KP 1.00 LA 0.95 MK 1.00 ! NL 1.24 OV 0.87 PT 0.95 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.05 KP 0.96 LA 1.05 ! NL 1.12 PT 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 KP 1.04 LA 1.07 MK 0.91 ! NL 1.20 PT 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00 HN 1.33 KP 1.10 LA 1.06 ! MK 1.07 NL 1.04 OV 0.84 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! HN 1.39 KP 0.97 LA 0.99 MK 1.01 ! NL 1.19 OV 0.88 PT 0.95 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 HN 1.04 KP 0.99 LA 1.05 ! NL 1.12 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 KP 0.99 LA 1.06 MK 0.93 ! NL 1.19 PT 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00 HN 1.69 KP 1.08 LA 1.08 ! MK 1.08 NL 0.91 OV 0.82 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! HN 1.24 KP 0.95 LA 0.99 MK 1.03 ! NL 1.19 OV 0.83 PT 0.93 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.00 KP 0.95 LA 1.03 ! NL 1.07 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 KP 1.05 LA 1.08 MK 0.92 ! NL 1.24 PT 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.99 HN 1.29 KP 1.05 LA 1.04 ! MK 1.06 NL 1.02 OV 0.87 ! ! ! Fit before self-cal, rms=0.087776Jy sigma=1.205516 ! Fit after self-cal, rms=0.102514Jy sigma=1.159838 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.794 mas, bmaj=2.315 mas, bpa=-11.38 degrees ! Estimated noise=0.228829 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00208194 Jy ! Component: 100 - total flux cleaned = -0.00289769 Jy ! Component: 150 - total flux cleaned = -0.00352612 Jy ! Component: 200 - total flux cleaned = -0.00391355 Jy ! Total flux subtracted in 200 components = -0.00391355 Jy ! Clean residual min=-0.003868 max=0.002825 Jy/beam ! Clean residual mean=-0.000012 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.209098 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 49 components and 0.209098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102323Jy sigma=1.155762 ! Fit after self-cal, rms=0.102648Jy sigma=1.154831 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102648Jy sigma=1.154831 ! Fit after self-cal, rms=0.105307Jy sigma=1.152062 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7934 mas, bmaj=2.313 mas, bpa=-11.42 degrees ! Estimated noise=0.229638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00176866 Jy ! Component: 100 - total flux cleaned = -0.00240094 Jy ! Component: 150 - total flux cleaned = -0.00283772 Jy ! Component: 200 - total flux cleaned = -0.00314598 Jy ! Total flux subtracted in 200 components = -0.00314598 Jy ! Clean residual min=-0.003268 max=0.002635 Jy/beam ! Clean residual mean=-0.000010 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.205952 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 0.205952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105199Jy sigma=1.149562 ! Fit after self-cal, rms=0.105206Jy sigma=1.149295 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000613732 Jy ! Component: 100 - total flux cleaned = -0.00066312 Jy ! Component: 150 - total flux cleaned = -0.000661769 Jy ! Component: 200 - total flux cleaned = -0.000759531 Jy ! Total flux subtracted in 200 components = -0.000759531 Jy ! Clean residual min=-0.003111 max=0.002563 Jy/beam ! Clean residual mean=-0.000009 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.205193 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.205193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105180Jy sigma=1.148502 ! Fit after self-cal, rms=0.105165Jy sigma=1.148379 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105165Jy sigma=1.148379 ! Fit after self-cal, rms=0.108207Jy sigma=1.147090 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7929 mas, bmaj=2.31 mas, bpa=-11.44 degrees ! Estimated noise=0.230272 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00164206 Jy ! Component: 100 - total flux cleaned = -0.00198163 Jy ! Component: 150 - total flux cleaned = -0.00224913 Jy ! Component: 200 - total flux cleaned = -0.00243378 Jy ! Total flux subtracted in 200 components = -0.00243378 Jy ! Clean residual min=-0.002744 max=0.002402 Jy/beam ! Clean residual mean=-0.000008 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.202759 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.202759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108153Jy sigma=1.145769 ! Fit after self-cal, rms=0.108175Jy sigma=1.145610 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000512467 Jy ! Component: 100 - total flux cleaned = -0.000515566 Jy ! Component: 150 - total flux cleaned = -0.000513809 Jy ! Component: 200 - total flux cleaned = -0.000537417 Jy ! Total flux subtracted in 200 components = -0.000537417 Jy ! Clean residual min=-0.002654 max=0.002350 Jy/beam ! Clean residual mean=-0.000007 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.202222 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.202222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108162Jy sigma=1.145176 ! Fit after self-cal, rms=0.108151Jy sigma=1.145105 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108151Jy sigma=1.145105 ! Fit after self-cal, rms=0.110681Jy sigma=1.144558 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.444 mas, bmaj=9.412 mas, bpa=-6.636 degrees ! Estimated noise=0.285558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146025 Jy ! Component: 100 - total flux cleaned = -0.001557 Jy ! Component: 150 - total flux cleaned = -0.00163846 Jy ! Component: 200 - total flux cleaned = -0.00170829 Jy ! Total flux subtracted in 200 components = -0.00170829 Jy ! Clean residual min=-0.002572 max=0.002266 Jy/beam ! Clean residual mean=-0.000017 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.200513 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 76 components and 0.200513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110664Jy sigma=1.144168 ! Fit after self-cal, rms=0.110685Jy sigma=1.143984 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000361328 Jy ! Component: 100 - total flux cleaned = -0.000339539 Jy ! Component: 150 - total flux cleaned = -0.000324292 Jy ! Component: 200 - total flux cleaned = -0.000290315 Jy ! Total flux subtracted in 200 components = -0.000290315 Jy ! Clean residual min=-0.002589 max=0.002249 Jy/beam ! Clean residual mean=-0.000016 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.200223 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 84 components and 0.200223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110684Jy sigma=1.143882 ! Fit after self-cal, rms=0.110673Jy sigma=1.143801 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7927 mas, bmaj=2.306 mas, bpa=-11.45 degrees ! Estimated noise=0.230678 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7927 x 2.306 at -11.45 degrees (North through East) ! Clean map min=-0.0021721 max=0.15313 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5591 mas, bmaj=1.702 mas, bpa=-10.83 degrees ! Estimated noise=0.546058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129762 Jy ! Component: 100 - total flux cleaned = 0.162704 Jy ! Component: 150 - total flux cleaned = 0.177423 Jy ! Component: 200 - total flux cleaned = 0.186209 Jy ! Total flux subtracted in 200 components = 0.186209 Jy ! Clean residual min=-0.004543 max=0.006219 Jy/beam ! Clean residual mean=0.000009 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.186209 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.186209 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7927 mas, bmaj=2.306 mas, bpa=-11.45 degrees ! Estimated noise=0.230678 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00739477 Jy ! Component: 100 - total flux cleaned = 0.0113105 Jy ! Component: 150 - total flux cleaned = 0.0133038 Jy ! Component: 200 - total flux cleaned = 0.0136163 Jy ! Total flux subtracted in 200 components = 0.0136163 Jy ! Clean residual min=-0.002474 max=0.002180 Jy/beam ! Clean residual mean=-0.000005 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.199825 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 31 components and 0.199825 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.444 mas, bmaj=9.412 mas, bpa=-6.636 degrees ! Estimated noise=0.285558 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116096 Jy ! Component: 100 - total flux cleaned = 0.00133716 Jy ! Component: 150 - total flux cleaned = 0.00131864 Jy ! Component: 200 - total flux cleaned = 0.00128241 Jy ! Total flux subtracted in 200 components = 0.00128241 Jy ! Clean residual min=-0.002621 max=0.002155 Jy/beam ! Clean residual mean=-0.000018 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.201108 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.62811e-05 Jy ! Component: 100 - total flux cleaned = -4.9772e-05 Jy ! Component: 150 - total flux cleaned = -6.54395e-05 Jy ! Component: 200 - total flux cleaned = -9.41521e-05 Jy ! Total flux subtracted in 200 components = -9.41521e-05 Jy ! Clean residual min=-0.002587 max=0.002163 Jy/beam ! Clean residual mean=-0.000018 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.201014 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.201014 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7927 mas, bmaj=2.306 mas, bpa=-11.45 degrees ! Estimated noise=0.230678 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000430081 Jy ! Component: 100 - total flux cleaned = -0.000377305 Jy ! Component: 150 - total flux cleaned = -0.000376795 Jy ! Component: 200 - total flux cleaned = -0.000375985 Jy ! Total flux subtracted in 200 components = -0.000375985 Jy ! Clean residual min=-0.002498 max=0.002174 Jy/beam ! Clean residual mean=-0.000007 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.200638 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.200638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110736Jy sigma=1.144599 ! Fit after self-cal, rms=0.110774Jy sigma=1.144315 wmodel J0453-3949_X_a_map.mod ! Writing 52 model components to file: J0453-3949_X_a_map.mod wobs J0453-3949_X_a_uvs.fits ! Writing UV FITS file: J0453-3949_X_a_uvs.fits wwins J0453-3949_X_a_map.win ! wwins: Wrote 5 windows to J0453-3949_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000557619 Jy ! Component: 100 - total flux cleaned = -0.00113709 Jy ! Component: 150 - total flux cleaned = -0.00170166 Jy ! Component: 200 - total flux cleaned = -0.00207213 Jy ! Component: 250 - total flux cleaned = -0.00236469 Jy ! Component: 300 - total flux cleaned = -0.00264499 Jy ! Component: 350 - total flux cleaned = -0.00294255 Jy ! Component: 400 - total flux cleaned = -0.00299533 Jy ! Component: 450 - total flux cleaned = -0.0031227 Jy ! Component: 500 - total flux cleaned = -0.00319668 Jy ! Component: 550 - total flux cleaned = -0.00329297 Jy ! Component: 600 - total flux cleaned = -0.0033633 Jy ! Component: 650 - total flux cleaned = -0.0034088 Jy ! Component: 700 - total flux cleaned = -0.00343141 Jy ! Component: 750 - total flux cleaned = -0.00351908 Jy ! Component: 800 - total flux cleaned = -0.00354038 Jy ! Component: 850 - total flux cleaned = -0.00351925 Jy ! Component: 900 - total flux cleaned = -0.0035607 Jy ! Component: 950 - total flux cleaned = -0.00360132 Jy ! Component: 1000 - total flux cleaned = -0.00360116 Jy ! Component: 1050 - total flux cleaned = -0.00358139 Jy ! Component: 1100 - total flux cleaned = -0.00352285 Jy ! Component: 1150 - total flux cleaned = -0.00358056 Jy ! Component: 1200 - total flux cleaned = -0.00354248 Jy ! Component: 1250 - total flux cleaned = -0.00350527 Jy ! Component: 1300 - total flux cleaned = -0.00346811 Jy ! Component: 1350 - total flux cleaned = -0.00343154 Jy ! Component: 1400 - total flux cleaned = -0.00341338 Jy ! Component: 1450 - total flux cleaned = -0.00339552 Jy ! Component: 1500 - total flux cleaned = -0.00343041 Jy ! Component: 1550 - total flux cleaned = -0.00334335 Jy ! Component: 1600 - total flux cleaned = -0.00332591 Jy ! Component: 1650 - total flux cleaned = -0.00327487 Jy ! Component: 1700 - total flux cleaned = -0.00327487 Jy ! Component: 1750 - total flux cleaned = -0.0032748 Jy ! Component: 1800 - total flux cleaned = -0.00324222 Jy ! Component: 1850 - total flux cleaned = -0.0031936 Jy ! Component: 1900 - total flux cleaned = -0.00317763 Jy ! Component: 1950 - total flux cleaned = -0.00311411 Jy ! Component: 2000 - total flux cleaned = -0.00314553 Jy ! Component: 2050 - total flux cleaned = -0.00306757 Jy ! Component: 2100 - total flux cleaned = -0.00302115 Jy ! Component: 2150 - total flux cleaned = -0.00302097 Jy ! Component: 2200 - total flux cleaned = -0.00299046 Jy ! Component: 2250 - total flux cleaned = -0.00294523 Jy ! Component: 2300 - total flux cleaned = -0.00291528 Jy ! Component: 2350 - total flux cleaned = -0.00287118 Jy ! Component: 2400 - total flux cleaned = -0.00288578 Jy ! Component: 2450 - total flux cleaned = -0.00287123 Jy ! Component: 2500 - total flux cleaned = -0.00288542 Jy ! Component: 2550 - total flux cleaned = -0.00280013 Jy ! Component: 2600 - total flux cleaned = -0.00281424 Jy ! Component: 2650 - total flux cleaned = -0.00281435 Jy ! Component: 2700 - total flux cleaned = -0.00277274 Jy ! Component: 2750 - total flux cleaned = -0.00277268 Jy ! Component: 2800 - total flux cleaned = -0.00271822 Jy ! Component: 2850 - total flux cleaned = -0.00277233 Jy ! Component: 2900 - total flux cleaned = -0.00271865 Jy ! Component: 2950 - total flux cleaned = -0.00269198 Jy ! Component: 3000 - total flux cleaned = -0.00265224 Jy ! Component: 3050 - total flux cleaned = -0.00263921 Jy ! Component: 3100 - total flux cleaned = -0.00258725 Jy ! Component: 3150 - total flux cleaned = -0.00253577 Jy ! Component: 3200 - total flux cleaned = -0.00252308 Jy ! Component: 3250 - total flux cleaned = -0.00252313 Jy ! Component: 3300 - total flux cleaned = -0.00244737 Jy ! Component: 3350 - total flux cleaned = -0.00238461 Jy ! Component: 3400 - total flux cleaned = -0.0023472 Jy ! Component: 3450 - total flux cleaned = -0.0022606 Jy ! Component: 3500 - total flux cleaned = -0.00218707 Jy ! Component: 3550 - total flux cleaned = -0.00216282 Jy ! Component: 3600 - total flux cleaned = -0.00211427 Jy ! Component: 3650 - total flux cleaned = -0.00206614 Jy ! Component: 3700 - total flux cleaned = -0.00201838 Jy ! Component: 3750 - total flux cleaned = -0.00197082 Jy ! Component: 3800 - total flux cleaned = -0.00193536 Jy ! Component: 3850 - total flux cleaned = -0.00192361 Jy ! Component: 3900 - total flux cleaned = -0.00190027 Jy ! Component: 3950 - total flux cleaned = -0.00183069 Jy ! Component: 4000 - total flux cleaned = -0.00178456 Jy ! Component: 4050 - total flux cleaned = -0.00176187 Jy ! Total flux subtracted in 4096 components = -0.00175048 Jy ! Clean residual min=-0.000671 max=0.000616 Jy/beam ! Clean residual mean=-0.000001 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.198887 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 350 components and 0.198887 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0453-3949_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7927 x 2.306 at -11.45 degrees (North through East) ! Clean map min=-0.001355 max=0.15173 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0453-3949_X_a_map.fits wmodel /vlbi/uf001/uvm//J0453-3949_X_a_map.mod ! Writing 350 model components to file: /vlbi/uf001/uvm//J0453-3949_X_a_map.mod wobs /vlbi/uf001/uvm//J0453-3949_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0453-3949_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0453-3949_X_a_map.win ! wwins: Wrote 6 windows to /vlbi/uf001/uvm//J0453-3949_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.151728 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000196501 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.388528 0.388528 0.777056 1.55411 3.10822 6.21645 12.4329 24.8658 49.7316 99.4631 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.151 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 772.145 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0453-3949_X_a_dfm.log closed on Sun Jan 13 20:47:07 2019