! Started logfile: /vlbi/uf001/uvm//J0443+3441_X_a_dfm.log on Sun Jan 13 20:46:34 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0443+3441_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0443+3441_X_a_uvm.fits ! AN table 1: 37 integrations on 45 of 45 possible baselines. ! AN table 2: 7 integrations on 28 of 28 possible baselines. ! AN table 3: 6 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.666346 visibilities/baseline/integration-bin. ! Found source: J0443+3441 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 16608 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0443+3441_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 174 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 174 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 174 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 174 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 174 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 174 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 174 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 174 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 174 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 174 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 174 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 174 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.017902Jy sigma=22.078266 ! Fit after self-cal, rms=0.821645Jy sigma=17.802553 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7082 mas, bmaj=1.342 mas, bpa=6.036 degrees ! Estimated noise=0.438458 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133024 Jy ! Component: 100 - total flux cleaned = 0.169982 Jy ! Total flux subtracted in 100 components = 0.169982 Jy ! Clean residual min=-0.009598 max=0.042235 Jy/beam ! Clean residual mean=0.000005 rms=0.002084 Jy/beam ! Combined flux in latest and established models = 0.169982 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.169982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088479Jy sigma=1.870316 ! Fit after self-cal, rms=0.088374Jy sigma=1.868186 ! Inverting map ! Added new window around map position (-0.2, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0356491 Jy ! Component: 100 - total flux cleaned = 0.0533681 Jy ! Total flux subtracted in 100 components = 0.0533681 Jy ! Clean residual min=-0.007261 max=0.009620 Jy/beam ! Clean residual mean=-0.000000 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.22335 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 0.22335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071574Jy sigma=1.490995 ! Fit after self-cal, rms=0.069942Jy sigma=1.457044 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149197 Jy ! Component: 100 - total flux cleaned = 0.0240868 Jy ! Total flux subtracted in 100 components = 0.0240868 Jy ! Clean residual min=-0.005676 max=0.005330 Jy/beam ! Clean residual mean=-0.000003 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.247437 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.247437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066076Jy sigma=1.368203 ! Fit after self-cal, rms=0.065836Jy sigma=1.363197 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499432 Jy ! Component: 100 - total flux cleaned = 0.00835452 Jy ! Total flux subtracted in 100 components = 0.00835452 Jy ! Clean residual min=-0.005562 max=0.004984 Jy/beam ! Clean residual mean=-0.000004 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.255792 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.255792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064962Jy sigma=1.342997 ! Fit after self-cal, rms=0.064909Jy sigma=1.341999 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8824 mas, bmaj=1.613 mas, bpa=11.48 degrees ! Estimated noise=0.304798 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533727 Jy ! Component: 100 - total flux cleaned = 0.00885698 Jy ! Component: 150 - total flux cleaned = 0.0113926 Jy ! Component: 200 - total flux cleaned = 0.0131883 Jy ! Total flux subtracted in 200 components = 0.0131883 Jy ! Clean residual min=-0.004600 max=0.006294 Jy/beam ! Clean residual mean=-0.000012 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.26898 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 43 components and 0.26898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064386Jy sigma=1.329699 ! Fit after self-cal, rms=0.064370Jy sigma=1.329362 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8824 x 1.613 at 11.48 degrees (North through East) ! Clean map min=-0.004318 max=0.17715 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 0.93 KP 1.01 ! LA 0.95 MK 1.01 NL 1.17 OV 0.95 ! PT 0.88 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.93 LA 0.92 MK 1.00 ! NL 1.15 OV 0.94 PT 0.89 SC 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00 HN 0.91 KP 0.95 ! LA 0.91 MK 1.01 NL 1.11 OV 0.91 ! SC 0.96 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 0.90 KP 0.99 ! LA 0.96 MK 1.00 NL 1.16 OV 0.94 ! PT 0.88 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.10 LA 1.02 MK 0.97 ! NL 1.14 OV 0.89 PT 0.85 SC 1.10 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.02 HN 0.94 KP 0.94 ! LA 0.92 MK 0.99 NL 1.08 OV 0.92 ! SC 0.89 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 0.90 KP 1.00 ! LA 0.95 MK 1.05 NL 1.15 OV 0.95 ! PT 0.87 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.16 FD 0.97 LA 1.01 MK 1.02 ! NL 1.18 OV 0.95 PT 0.86 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.99 HN 0.95 KP 0.96 ! LA 0.93 MK 1.08 NL 1.10 OV 0.92 ! SC 0.86 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.98 HN 0.91 KP 1.02 ! LA 0.95 MK 1.04 NL 1.18 OV 0.94 ! PT 0.82 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.00 LA 0.99 MK 0.98 ! NL 1.16 OV 1.04 PT 0.87 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 0.93 HN 0.91 KP 1.01 ! LA 0.90 MK 0.97 NL 1.15 OV 0.91 ! SC 0.94 ! ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 0.94 KP 1.02 ! LA 0.94 MK 1.03 NL 1.16 OV 0.95 ! PT 0.91 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.00 LA 0.94 MK 0.94 ! NL 1.14 OV 0.99 PT 0.88 SC 1.21 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00 HN 0.96 KP 0.96 ! LA 0.93 MK 0.98 NL 1.12 OV 0.91 ! SC 1.01 ! ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.01 HN 0.91 KP 1.03 ! LA 0.93 MK 1.07 NL 1.16 OV 0.96 ! PT 0.84 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 1.01 LA 0.96 MK 0.97 ! NL 1.22 OV 1.03 PT 0.89 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 FD 0.98 HN 0.91 KP 0.98 ! LA 0.88 MK 1.01 NL 1.13 OV 0.94 ! SC 0.94 ! ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.98 HN 0.95 KP 1.03 ! LA 0.96 MK 1.06 NL 1.14 OV 0.94 ! PT 0.83 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 LA 1.02 MK 0.97 ! NL 1.18 OV 1.04 PT 0.91 SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 0.96 HN 0.93 KP 0.99 ! LA 0.93 MK 0.97 NL 1.12 OV 0.90 ! SC 0.87 ! ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.98 HN 0.94 KP 1.04 ! LA 0.97 MK 0.99 NL 1.19 OV 0.95 ! PT 0.87 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.01 LA 0.99 MK 1.02 ! NL 1.21 OV 0.95 PT 0.86 SC 1.13 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 0.99 HN 0.95 KP 0.91 ! LA 0.89 MK 0.95 NL 1.11 OV 0.92 ! SC 0.99 ! ! ! Correcting IF 9. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.01 HN 0.93 KP 1.02 ! LA 0.94 MK 1.06 NL 1.14 OV 0.95 ! PT 0.84 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.18 FD 1.05 LA 0.94 MK 1.00 ! NL 1.17 OV 1.00 PT 0.89 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.02 HN 0.89 KP 0.95 ! LA 0.96 MK 1.09 NL 1.07 OV 0.90 ! SC 0.96 ! ! ! Correcting IF 10. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.02 HN 0.94 KP 1.05 ! LA 0.94 MK 1.06 NL 1.17 OV 0.96 ! PT 0.85 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 LA 0.99 MK 0.98 ! NL 1.24 OV 0.93 PT 0.93 SC 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.00 HN 0.99 KP 0.97 ! LA 0.98 MK 0.98 NL 1.02 OV 0.91 ! SC 0.94 ! ! ! Correcting IF 11. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.98 HN 0.95 KP 1.03 ! LA 0.97 MK 1.04 NL 1.19 OV 0.96 ! PT 0.84 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 0.99 LA 0.94 MK 0.93 ! NL 1.18 OV 0.99 PT 0.98 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 0.95 HN 0.90 KP 0.98 ! LA 0.93 MK 1.06 NL 1.05 OV 0.88 ! SC 0.91 ! ! ! Correcting IF 12. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00 HN 0.94 KP 1.05 ! LA 0.97 MK 1.00 NL 1.21 OV 0.95 ! PT 0.88 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.97 LA 1.06 MK 1.10 ! NL 1.21 OV 0.94 PT 0.88 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 0.94 HN 0.92 KP 0.96 ! LA 0.92 MK 0.93 NL 1.17 OV 0.89 ! SC 1.06 ! ! ! Fit before self-cal, rms=0.064370Jy sigma=1.329362 ! Fit after self-cal, rms=0.061407Jy sigma=1.246973 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8769 mas, bmaj=1.62 mas, bpa=11.87 degrees ! Estimated noise=0.306934 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00231759 Jy ! Component: 100 - total flux cleaned = -0.00268762 Jy ! Component: 150 - total flux cleaned = -0.00290745 Jy ! Component: 200 - total flux cleaned = -0.00312048 Jy ! Total flux subtracted in 200 components = -0.00312048 Jy ! Clean residual min=-0.003663 max=0.003682 Jy/beam ! Clean residual mean=-0.000009 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.26586 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.26586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061254Jy sigma=1.243434 ! Fit after self-cal, rms=0.061289Jy sigma=1.242871 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061289Jy sigma=1.242871 ! Fit after self-cal, rms=0.060458Jy sigma=1.162358 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8729 mas, bmaj=1.624 mas, bpa=11.94 degrees ! Estimated noise=0.308803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021273 Jy ! Component: 100 - total flux cleaned = 0.00248387 Jy ! Component: 150 - total flux cleaned = 0.00244938 Jy ! Component: 200 - total flux cleaned = 0.00241869 Jy ! Total flux subtracted in 200 components = 0.00241869 Jy ! Clean residual min=-0.002589 max=0.002358 Jy/beam ! Clean residual mean=-0.000003 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.268278 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.268278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060367Jy sigma=1.160705 ! Fit after self-cal, rms=0.060399Jy sigma=1.160440 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103241 Jy ! Component: 100 - total flux cleaned = -0.000131397 Jy ! Component: 150 - total flux cleaned = -0.000184175 Jy ! Component: 200 - total flux cleaned = -0.000234632 Jy ! Total flux subtracted in 200 components = -0.000234632 Jy ! Clean residual min=-0.002595 max=0.002292 Jy/beam ! Clean residual mean=-0.000003 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.268044 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.268044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060377Jy sigma=1.159918 ! Fit after self-cal, rms=0.060375Jy sigma=1.159899 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060375Jy sigma=1.159899 ! Fit after self-cal, rms=0.059140Jy sigma=1.133266 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8701 mas, bmaj=1.622 mas, bpa=12.03 degrees ! Estimated noise=0.308963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000727798 Jy ! Component: 100 - total flux cleaned = 0.00069803 Jy ! Component: 150 - total flux cleaned = 0.000671407 Jy ! Component: 200 - total flux cleaned = 0.00064679 Jy ! Total flux subtracted in 200 components = 0.00064679 Jy ! Clean residual min=-0.001628 max=0.001812 Jy/beam ! Clean residual mean=-0.000003 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.26869 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.26869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059109Jy sigma=1.132650 ! Fit after self-cal, rms=0.059138Jy sigma=1.132527 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, -22.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182351 Jy ! Component: 100 - total flux cleaned = 0.00254643 Jy ! Component: 150 - total flux cleaned = 0.0024517 Jy ! Component: 200 - total flux cleaned = 0.00230794 Jy ! Total flux subtracted in 200 components = 0.00230794 Jy ! Clean residual min=-0.001619 max=0.001618 Jy/beam ! Clean residual mean=-0.000003 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.270998 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.270998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059067Jy sigma=1.131069 ! Fit after self-cal, rms=0.059063Jy sigma=1.130940 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059063Jy sigma=1.130940 ! Fit after self-cal, rms=0.059086Jy sigma=1.130694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.916 mas, bmaj=2.539 mas, bpa=13.49 degrees ! Estimated noise=0.408765 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000604241 Jy ! Component: 100 - total flux cleaned = 0.000902067 Jy ! Component: 150 - total flux cleaned = 0.00112142 Jy ! Component: 200 - total flux cleaned = 0.00128544 Jy ! Total flux subtracted in 200 components = 0.00128544 Jy ! Clean residual min=-0.001663 max=0.001861 Jy/beam ! Clean residual mean=-0.000006 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.272284 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 93 components and 0.272284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059074Jy sigma=1.130481 ! Fit after self-cal, rms=0.059074Jy sigma=1.130436 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157018 Jy ! Component: 100 - total flux cleaned = 0.000206982 Jy ! Component: 150 - total flux cleaned = 0.000238368 Jy ! Component: 200 - total flux cleaned = 0.00025663 Jy ! Total flux subtracted in 200 components = 0.00025663 Jy ! Clean residual min=-0.001615 max=0.001897 Jy/beam ! Clean residual mean=-0.000006 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.27254 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 100 components and 0.27254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059073Jy sigma=1.130416 ! Fit after self-cal, rms=0.059073Jy sigma=1.130401 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8681 mas, bmaj=1.621 mas, bpa=12.11 degrees ! Estimated noise=0.30903 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8681 x 1.621 at 12.11 degrees (North through East) ! Clean map min=-0.0014371 max=0.17848 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6976 mas, bmaj=1.349 mas, bpa=6.794 degrees ! Estimated noise=0.441916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134534 Jy ! Component: 100 - total flux cleaned = 0.184145 Jy ! Component: 150 - total flux cleaned = 0.211269 Jy ! Component: 200 - total flux cleaned = 0.229414 Jy ! Total flux subtracted in 200 components = 0.229414 Jy ! Clean residual min=-0.004162 max=0.009965 Jy/beam ! Clean residual mean=0.000004 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.229414 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.229414 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8681 mas, bmaj=1.621 mas, bpa=12.11 degrees ! Estimated noise=0.30903 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158546 Jy ! Component: 100 - total flux cleaned = 0.025315 Jy ! Component: 150 - total flux cleaned = 0.0312582 Jy ! Component: 200 - total flux cleaned = 0.0350952 Jy ! Total flux subtracted in 200 components = 0.0350952 Jy ! Clean residual min=-0.001731 max=0.002105 Jy/beam ! Clean residual mean=-0.000002 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.264509 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.264509 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271434 Jy ! Component: 100 - total flux cleaned = 0.00391253 Jy ! Component: 150 - total flux cleaned = 0.00492562 Jy ! Component: 200 - total flux cleaned = 0.00579835 Jy ! Total flux subtracted in 200 components = 0.00579835 Jy ! Clean residual min=-0.001582 max=0.001708 Jy/beam ! Clean residual mean=-0.000002 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.270307 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 42 components and 0.270307 Jy ! Inverting map ! Added new window around map position (0, 4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134276 Jy ! Component: 100 - total flux cleaned = 0.00175872 Jy ! Component: 150 - total flux cleaned = 0.00228665 Jy ! Component: 200 - total flux cleaned = 0.00264352 Jy ! Total flux subtracted in 200 components = 0.00264352 Jy ! Clean residual min=-0.001526 max=0.001532 Jy/beam ! Clean residual mean=-0.000001 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.272951 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 56 components and 0.272951 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.916 mas, bmaj=2.539 mas, bpa=13.49 degrees ! Estimated noise=0.408765 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000924064 Jy ! Component: 100 - total flux cleaned = 0.00146038 Jy ! Component: 150 - total flux cleaned = 0.00188517 Jy ! Component: 200 - total flux cleaned = 0.00224809 Jy ! Total flux subtracted in 200 components = 0.00224809 Jy ! Clean residual min=-0.001619 max=0.001801 Jy/beam ! Clean residual mean=-0.000003 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.275199 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283118 Jy ! Component: 100 - total flux cleaned = 0.000489176 Jy ! Component: 150 - total flux cleaned = 0.000609814 Jy ! Component: 200 - total flux cleaned = 0.000719182 Jy ! Total flux subtracted in 200 components = 0.000719182 Jy ! Clean residual min=-0.001620 max=0.001798 Jy/beam ! Clean residual mean=-0.000002 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.275918 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 79 components and 0.275918 Jy ! Inverting map ! Added new window around map position (26.6, -19.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000916092 Jy ! Component: 100 - total flux cleaned = 0.000562339 Jy ! Component: 150 - total flux cleaned = 0.000254603 Jy ! Component: 200 - total flux cleaned = 0.000151432 Jy ! Total flux subtracted in 200 components = 0.000151432 Jy ! Clean residual min=-0.001608 max=0.001603 Jy/beam ! Clean residual mean=-0.000002 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.27607 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 104 components and 0.27607 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8681 mas, bmaj=1.621 mas, bpa=12.11 degrees ! Estimated noise=0.30903 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105512 Jy ! Component: 100 - total flux cleaned = -0.00014471 Jy ! Component: 150 - total flux cleaned = -0.000105302 Jy ! Component: 200 - total flux cleaned = -0.000141632 Jy ! Total flux subtracted in 200 components = -0.000141632 Jy ! Clean residual min=-0.001456 max=0.001399 Jy/beam ! Clean residual mean=-0.000000 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.275928 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 125 components and 0.275928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059053Jy sigma=1.130141 ! Fit after self-cal, rms=0.059031Jy sigma=1.129749 wmodel J0443+3441_X_a_map.mod ! Writing 125 model components to file: J0443+3441_X_a_map.mod wobs J0443+3441_X_a_uvs.fits ! Writing UV FITS file: J0443+3441_X_a_uvs.fits wwins J0443+3441_X_a_map.win ! wwins: Wrote 5 windows to J0443+3441_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00035578 Jy ! Component: 100 - total flux cleaned = -0.000535504 Jy ! Component: 150 - total flux cleaned = -0.000608819 Jy ! Component: 200 - total flux cleaned = -0.000632156 Jy ! Component: 250 - total flux cleaned = -0.000631501 Jy ! Component: 300 - total flux cleaned = -0.00060833 Jy ! Component: 350 - total flux cleaned = -0.000496167 Jy ! Component: 400 - total flux cleaned = -0.000518346 Jy ! Component: 450 - total flux cleaned = -0.000364815 Jy ! Component: 500 - total flux cleaned = -0.000300104 Jy ! Component: 550 - total flux cleaned = -0.000256843 Jy ! Component: 600 - total flux cleaned = -8.71326e-05 Jy ! Component: 650 - total flux cleaned = -2.40177e-05 Jy ! Component: 700 - total flux cleaned = 0.00010103 Jy ! Component: 750 - total flux cleaned = 0.000286751 Jy ! Component: 800 - total flux cleaned = 0.00042958 Jy ! Component: 850 - total flux cleaned = 0.000530857 Jy ! Component: 900 - total flux cleaned = 0.000631578 Jy ! Component: 950 - total flux cleaned = 0.000771056 Jy ! Component: 1000 - total flux cleaned = 0.000790895 Jy ! Component: 1050 - total flux cleaned = 0.000948091 Jy ! Component: 1100 - total flux cleaned = 0.00106505 Jy ! Component: 1150 - total flux cleaned = 0.00110362 Jy ! Component: 1200 - total flux cleaned = 0.00123798 Jy ! Component: 1250 - total flux cleaned = 0.00129496 Jy ! Component: 1300 - total flux cleaned = 0.00137075 Jy ! Component: 1350 - total flux cleaned = 0.00146463 Jy ! Component: 1400 - total flux cleaned = 0.00153907 Jy ! Component: 1450 - total flux cleaned = 0.00168724 Jy ! Component: 1500 - total flux cleaned = 0.00168719 Jy ! Component: 1550 - total flux cleaned = 0.00179691 Jy ! Component: 1600 - total flux cleaned = 0.0018696 Jy ! Component: 1650 - total flux cleaned = 0.00205003 Jy ! Component: 1700 - total flux cleaned = 0.00208589 Jy ! Component: 1750 - total flux cleaned = 0.00222843 Jy ! Component: 1800 - total flux cleaned = 0.00229916 Jy ! Component: 1850 - total flux cleaned = 0.00236957 Jy ! Component: 1900 - total flux cleaned = 0.00242195 Jy ! Component: 1950 - total flux cleaned = 0.00252633 Jy ! Component: 2000 - total flux cleaned = 0.0025957 Jy ! Component: 2050 - total flux cleaned = 0.00268185 Jy ! Component: 2100 - total flux cleaned = 0.00280163 Jy ! Component: 2150 - total flux cleaned = 0.00281869 Jy ! Component: 2200 - total flux cleaned = 0.00292048 Jy ! Component: 2250 - total flux cleaned = 0.00297129 Jy ! Component: 2300 - total flux cleaned = 0.00308873 Jy ! Component: 2350 - total flux cleaned = 0.00307211 Jy ! Component: 2400 - total flux cleaned = 0.00328793 Jy ! Component: 2450 - total flux cleaned = 0.00333743 Jy ! Component: 2500 - total flux cleaned = 0.00333743 Jy ! Component: 2550 - total flux cleaned = 0.00343556 Jy ! Component: 2600 - total flux cleaned = 0.00343564 Jy ! Component: 2650 - total flux cleaned = 0.00343563 Jy ! Component: 2700 - total flux cleaned = 0.00354851 Jy ! Component: 2750 - total flux cleaned = 0.00350034 Jy ! Component: 2800 - total flux cleaned = 0.00358027 Jy ! Component: 2850 - total flux cleaned = 0.00359611 Jy ! Component: 2900 - total flux cleaned = 0.00365949 Jy ! Component: 2950 - total flux cleaned = 0.00375403 Jy ! Component: 3000 - total flux cleaned = 0.00370684 Jy ! Component: 3050 - total flux cleaned = 0.00375369 Jy ! Component: 3100 - total flux cleaned = 0.00376916 Jy ! Component: 3150 - total flux cleaned = 0.00378467 Jy ! Component: 3200 - total flux cleaned = 0.00389272 Jy ! Component: 3250 - total flux cleaned = 0.00390806 Jy ! Component: 3300 - total flux cleaned = 0.00384681 Jy ! Component: 3350 - total flux cleaned = 0.00384673 Jy ! Component: 3400 - total flux cleaned = 0.00399863 Jy ! Component: 3450 - total flux cleaned = 0.00402895 Jy ! Component: 3500 - total flux cleaned = 0.00405894 Jy ! Component: 3550 - total flux cleaned = 0.00407395 Jy ! Component: 3600 - total flux cleaned = 0.00401413 Jy ! Component: 3650 - total flux cleaned = 0.00404398 Jy ! Component: 3700 - total flux cleaned = 0.00411815 Jy ! Component: 3750 - total flux cleaned = 0.00408865 Jy ! Component: 3800 - total flux cleaned = 0.00411809 Jy ! Component: 3850 - total flux cleaned = 0.00417674 Jy ! Component: 3900 - total flux cleaned = 0.00419141 Jy ! Component: 3950 - total flux cleaned = 0.00419133 Jy ! Component: 4000 - total flux cleaned = 0.00422032 Jy ! Component: 4050 - total flux cleaned = 0.00420584 Jy ! Total flux subtracted in 4096 components = 0.00430659 Jy ! Clean residual min=-0.000766 max=0.000949 Jy/beam ! Clean residual mean=0.000001 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.280235 Jy keep ! Adding 339 model components to the UV plane model. ! The established model now contains 464 components and 0.280235 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0443+3441_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8681 x 1.621 at 12.11 degrees (North through East) ! Clean map min=-0.0012999 max=0.17858 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0443+3441_X_a_map.fits wmodel /vlbi/uf001/uvm//J0443+3441_X_a_map.mod ! Writing 464 model components to file: /vlbi/uf001/uvm//J0443+3441_X_a_map.mod wobs /vlbi/uf001/uvm//J0443+3441_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0443+3441_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0443+3441_X_a_map.win ! wwins: Wrote 6 windows to /vlbi/uf001/uvm//J0443+3441_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.17858 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000247587 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.415926 0.415926 0.831853 1.66371 3.32741 6.65482 13.3096 26.6193 53.2386 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.178 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 721.281 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0443+3441_X_a_dfm.log closed on Sun Jan 13 20:46:39 2019