! Started logfile: /vlbi/uf001/uva//J0438+2153_S_dfm.log on Sun Jan 13 22:15:32 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0438+2153_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0438+2153_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.961905 visibilities/baseline/integration-bin.
! Found source: J0438+2153
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5454 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0438+2153_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019433Jy  sigma=20.996061
! Fit after  self-cal, rms=0.769107Jy  sigma=15.729147
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.024 mas, bmaj=6.175 mas, bpa=-3.744 degrees
! Estimated noise=0.685548 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.174806 Jy
! Component: 100  -  total flux cleaned = 0.221312 Jy
! Total flux subtracted in 100 components = 0.221312 Jy
! Clean residual min=-0.007566 max=0.019534 Jy/beam
! Clean residual mean=-0.000068 rms=0.002070 Jy/beam
! Combined flux in latest and established models = 0.221312 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.221312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071953Jy  sigma=1.436763
! Fit after  self-cal, rms=0.071944Jy  sigma=1.436496
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209368 Jy
! Component: 100  -  total flux cleaned = 0.0310481 Jy
! Total flux subtracted in 100 components = 0.0310481 Jy
! Clean residual min=-0.006274 max=0.010370 Jy/beam
! Clean residual mean=-0.000047 rms=0.001428 Jy/beam
! Combined flux in latest and established models = 0.25236 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 12 components and 0.25236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064979Jy  sigma=1.284997
! Fit after  self-cal, rms=0.064971Jy  sigma=1.284670
! Inverting map 
! Added new window around map position (7, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0094342 Jy
! Component: 100  -  total flux cleaned = 0.0150537 Jy
! Total flux subtracted in 100 components = 0.0150537 Jy
! Clean residual min=-0.005534 max=0.006160 Jy/beam
! Clean residual mean=-0.000035 rms=0.001230 Jy/beam
! Combined flux in latest and established models = 0.267414 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 36 components and 0.267414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063269Jy  sigma=1.248831
! Fit after  self-cal, rms=0.063156Jy  sigma=1.246008
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.494 mas, bmaj=6.889 mas, bpa=-2.886 degrees
! Estimated noise=0.513883 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00666393 Jy
! Component: 100  -  total flux cleaned = 0.0110901 Jy
! Component: 150  -  total flux cleaned = 0.014303 Jy
! Component: 200  -  total flux cleaned = 0.0166606 Jy
! Total flux subtracted in 200 components = 0.0166606 Jy
! Clean residual min=-0.004852 max=0.004620 Jy/beam
! Clean residual mean=-0.000019 rms=0.001121 Jy/beam
! Combined flux in latest and established models = 0.284074 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 80 components and 0.284074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062325Jy  sigma=1.227563
! Fit after  self-cal, rms=0.062283Jy  sigma=1.226478
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.494 x 6.889 at -2.886 degrees (North through East)
! Clean map  min=-0.0045721  max=0.22942 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.98     KP        1.02     
!   LA        0.90     MK        1.01     NL        1.07     OV        1.03     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.01     KP        1.02     
!   LA        0.90     MK        1.00     NL        1.04     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.98     KP        1.07     
!   LA        0.93     MK        1.03     NL        1.07     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.062283Jy  sigma=1.226478
! Fit after  self-cal, rms=0.060708Jy  sigma=1.194243
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.514 mas, bmaj=6.929 mas, bpa=-2.876 degrees
! Estimated noise=0.513248 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0015817 Jy
! Component: 100  -  total flux cleaned = -0.00208513 Jy
! Component: 150  -  total flux cleaned = -0.00225348 Jy
! Component: 200  -  total flux cleaned = -0.00240077 Jy
! Total flux subtracted in 200 components = -0.00240077 Jy
! Clean residual min=-0.003452 max=0.003553 Jy/beam
! Clean residual mean=-0.000003 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.281673 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 90 components and 0.281673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060654Jy  sigma=1.193126
! Fit after  self-cal, rms=0.060670Jy  sigma=1.192961
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060670Jy  sigma=1.192961
! Fit after  self-cal, rms=0.060132Jy  sigma=1.174239
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.507 mas, bmaj=6.935 mas, bpa=-2.834 degrees
! Estimated noise=0.512827 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000843165 Jy
! Component: 100  -  total flux cleaned = -0.000736005 Jy
! Component: 150  -  total flux cleaned = -0.000675373 Jy
! Component: 200  -  total flux cleaned = -0.000624606 Jy
! Total flux subtracted in 200 components = -0.000624606 Jy
! Clean residual min=-0.002374 max=0.002620 Jy/beam
! Clean residual mean=0.000002 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.281049 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 103 components and 0.281049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060089Jy  sigma=1.173433
! Fit after  self-cal, rms=0.060096Jy  sigma=1.173317
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-75.5, 45).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00253827 Jy
! Component: 100  -  total flux cleaned = 0.00382541 Jy
! Component: 150  -  total flux cleaned = 0.00439261 Jy
! Component: 200  -  total flux cleaned = 0.0048174 Jy
! Total flux subtracted in 200 components = 0.0048174 Jy
! Clean residual min=-0.002332 max=0.002155 Jy/beam
! Clean residual mean=0.000003 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.285866 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 123 components and 0.285866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059963Jy  sigma=1.170743
! Fit after  self-cal, rms=0.059959Jy  sigma=1.170623
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059959Jy  sigma=1.170623
! Fit after  self-cal, rms=0.059957Jy  sigma=1.170378
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.507 mas, bmaj=6.938 mas, bpa=-2.844 degrees
! Estimated noise=0.512219 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000667605 Jy
! Component: 100  -  total flux cleaned = 0.000811538 Jy
! Component: 150  -  total flux cleaned = 0.000874456 Jy
! Component: 200  -  total flux cleaned = 0.000961061 Jy
! Total flux subtracted in 200 components = 0.000961061 Jy
! Clean residual min=-0.002288 max=0.002253 Jy/beam
! Clean residual mean=0.000002 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.286827 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 131 components and 0.286827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059920Jy  sigma=1.169709
! Fit after  self-cal, rms=0.059920Jy  sigma=1.169690
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.2176e-05 Jy
! Component: 100  -  total flux cleaned = 0.000134456 Jy
! Component: 150  -  total flux cleaned = 0.000184143 Jy
! Component: 200  -  total flux cleaned = 0.000253849 Jy
! Total flux subtracted in 200 components = 0.000253849 Jy
! Clean residual min=-0.002289 max=0.002289 Jy/beam
! Clean residual mean=0.000002 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.287081 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 135 components and 0.287081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059900Jy  sigma=1.169323
! Fit after  self-cal, rms=0.059899Jy  sigma=1.169312
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059899Jy  sigma=1.169312
! Fit after  self-cal, rms=0.059897Jy  sigma=1.169257
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.36 mas, bmaj=10.26 mas, bpa=-2.662 degrees
! Estimated noise=0.634516 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000862841 Jy
! Component: 100  -  total flux cleaned = 0.00102147 Jy
! Component: 150  -  total flux cleaned = 0.00103883 Jy
! Component: 200  -  total flux cleaned = 0.000992164 Jy
! Total flux subtracted in 200 components = 0.000992164 Jy
! Clean residual min=-0.002397 max=0.002443 Jy/beam
! Clean residual mean=0.000005 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 0.288073 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 156 components and 0.288073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059895Jy  sigma=1.169229
! Fit after  self-cal, rms=0.059894Jy  sigma=1.169200
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137164 Jy
! Component: 100  -  total flux cleaned = 9.49958e-05 Jy
! Component: 150  -  total flux cleaned = 5.6052e-05 Jy
! Component: 200  -  total flux cleaned = 2.04843e-05 Jy
! Total flux subtracted in 200 components = 2.04843e-05 Jy
! Clean residual min=-0.002382 max=0.002428 Jy/beam
! Clean residual mean=0.000005 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.288094 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 162 components and 0.288094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059893Jy  sigma=1.169227
! Fit after  self-cal, rms=0.059893Jy  sigma=1.169222
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.506 mas, bmaj=6.938 mas, bpa=-2.862 degrees
! Estimated noise=0.511891 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.506 x 6.938 at -2.862 degrees (North through East)
! Clean map  min=-0.0022057  max=0.22885 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.033 mas, bmaj=6.218 mas, bpa=-3.739 degrees
! Estimated noise=0.688274 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.175407 Jy
! Component: 100  -  total flux cleaned = 0.221748 Jy
! Component: 150  -  total flux cleaned = 0.242345 Jy
! Component: 200  -  total flux cleaned = 0.253883 Jy
! Total flux subtracted in 200 components = 0.253883 Jy
! Clean residual min=-0.004448 max=0.005955 Jy/beam
! Clean residual mean=-0.000021 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.253883 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.253883 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.506 mas, bmaj=6.938 mas, bpa=-2.862 degrees
! Estimated noise=0.511891 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00873846 Jy
! Component: 100  -  total flux cleaned = 0.014165 Jy
! Component: 150  -  total flux cleaned = 0.0179447 Jy
! Component: 200  -  total flux cleaned = 0.0208784 Jy
! Total flux subtracted in 200 components = 0.0208784 Jy
! Clean residual min=-0.002590 max=0.002813 Jy/beam
! Clean residual mean=-0.000004 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.274762 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 62 components and 0.274762 Jy
! Inverting map 
! Added new window around map position (14.5, 0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00302147 Jy
! Component: 100  -  total flux cleaned = 0.00519447 Jy
! Component: 150  -  total flux cleaned = 0.00706183 Jy
! Component: 200  -  total flux cleaned = 0.00868423 Jy
! Total flux subtracted in 200 components = 0.00868423 Jy
! Clean residual min=-0.002378 max=0.002044 Jy/beam
! Clean residual mean=-0.000001 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.283446 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 92 components and 0.283446 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.36 mas, bmaj=10.26 mas, bpa=-2.662 degrees
! Estimated noise=0.634516 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00193763 Jy
! Component: 100  -  total flux cleaned = 0.00333406 Jy
! Component: 150  -  total flux cleaned = 0.00422274 Jy
! Component: 200  -  total flux cleaned = 0.00463411 Jy
! Total flux subtracted in 200 components = 0.00463411 Jy
! Clean residual min=-0.002290 max=0.002500 Jy/beam
! Clean residual mean=0.000003 rms=0.000653 Jy/beam
! Combined flux in latest and established models = 0.28808 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000298553 Jy
! Component: 100  -  total flux cleaned = 0.000536374 Jy
! Component: 150  -  total flux cleaned = 0.000749648 Jy
! Component: 200  -  total flux cleaned = 0.000921362 Jy
! Total flux subtracted in 200 components = 0.000921362 Jy
! Clean residual min=-0.002235 max=0.002544 Jy/beam
! Clean residual mean=0.000004 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.289002 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 156 components and 0.289001 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.506 mas, bmaj=6.938 mas, bpa=-2.862 degrees
! Estimated noise=0.511891 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.32774e-05 Jy
! Component: 100  -  total flux cleaned = 0.000247819 Jy
! Component: 150  -  total flux cleaned = 0.0004256 Jy
! Component: 200  -  total flux cleaned = 0.000490884 Jy
! Total flux subtracted in 200 components = 0.000490884 Jy
! Clean residual min=-0.002182 max=0.002209 Jy/beam
! Clean residual mean=0.000003 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.289492 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 174 components and 0.289492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059863Jy  sigma=1.168495
! Fit after  self-cal, rms=0.059841Jy  sigma=1.168147
wmodel J0438+2153_S_map.mod
! Writing 174 model components to file: J0438+2153_S_map.mod
wobs   J0438+2153_S_uvs.fits
! Writing UV FITS file: J0438+2153_S_uvs.fits
wwins  J0438+2153_S_map.win
! wwins: Wrote 4 windows to J0438+2153_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -2.68531e-05 Jy
! Component: 100  -  total flux cleaned = -0.000137215 Jy
! Component: 150  -  total flux cleaned = -0.000311429 Jy
! Component: 200  -  total flux cleaned = -0.000480012 Jy
! Component: 250  -  total flux cleaned = -0.000481403 Jy
! Component: 300  -  total flux cleaned = -0.000607054 Jy
! Component: 350  -  total flux cleaned = -0.000514018 Jy
! Component: 400  -  total flux cleaned = -0.000574533 Jy
! Component: 450  -  total flux cleaned = -0.000751398 Jy
! Component: 500  -  total flux cleaned = -0.000779956 Jy
! Component: 550  -  total flux cleaned = -0.000894221 Jy
! Component: 600  -  total flux cleaned = -0.00100642 Jy
! Component: 650  -  total flux cleaned = -0.00117157 Jy
! Component: 700  -  total flux cleaned = -0.00127954 Jy
! Component: 750  -  total flux cleaned = -0.00146657 Jy
! Component: 800  -  total flux cleaned = -0.00157143 Jy
! Component: 850  -  total flux cleaned = -0.00167508 Jy
! Component: 900  -  total flux cleaned = -0.00175207 Jy
! Component: 950  -  total flux cleaned = -0.00180203 Jy
! Component: 1000  -  total flux cleaned = -0.00180218 Jy
! Component: 1050  -  total flux cleaned = -0.00185118 Jy
! Component: 1100  -  total flux cleaned = -0.00187549 Jy
! Component: 1150  -  total flux cleaned = -0.00189891 Jy
! Component: 1200  -  total flux cleaned = -0.00185115 Jy
! Component: 1250  -  total flux cleaned = -0.0018279 Jy
! Component: 1300  -  total flux cleaned = -0.00180484 Jy
! Component: 1350  -  total flux cleaned = -0.00180454 Jy
! Component: 1400  -  total flux cleaned = -0.00169163 Jy
! Component: 1450  -  total flux cleaned = -0.00166973 Jy
! Component: 1500  -  total flux cleaned = -0.00173607 Jy
! Component: 1550  -  total flux cleaned = -0.00173581 Jy
! Component: 1600  -  total flux cleaned = -0.00164943 Jy
! Component: 1650  -  total flux cleaned = -0.00169251 Jy
! Component: 1700  -  total flux cleaned = -0.00169262 Jy
! Component: 1750  -  total flux cleaned = -0.00167188 Jy
! Component: 1800  -  total flux cleaned = -0.00171381 Jy
! Component: 1850  -  total flux cleaned = -0.00179636 Jy
! Component: 1900  -  total flux cleaned = -0.00167409 Jy
! Component: 1950  -  total flux cleaned = -0.00175531 Jy
! Component: 2000  -  total flux cleaned = -0.00179541 Jy
! Component: 2050  -  total flux cleaned = -0.00185492 Jy
! Component: 2100  -  total flux cleaned = -0.00183485 Jy
! Component: 2150  -  total flux cleaned = -0.00189343 Jy
! Component: 2200  -  total flux cleaned = -0.00187406 Jy
! Component: 2250  -  total flux cleaned = -0.00193164 Jy
! Component: 2300  -  total flux cleaned = -0.00187468 Jy
! Component: 2350  -  total flux cleaned = -0.00189361 Jy
! Component: 2400  -  total flux cleaned = -0.00189358 Jy
! Component: 2450  -  total flux cleaned = -0.00187499 Jy
! Component: 2500  -  total flux cleaned = -0.00183809 Jy
! Component: 2550  -  total flux cleaned = -0.00180154 Jy
! Component: 2600  -  total flux cleaned = -0.00185604 Jy
! Component: 2650  -  total flux cleaned = -0.00180189 Jy
! Component: 2700  -  total flux cleaned = -0.00185581 Jy
! Component: 2750  -  total flux cleaned = -0.00174899 Jy
! Component: 2800  -  total flux cleaned = -0.00176657 Jy
! Component: 2850  -  total flux cleaned = -0.00173134 Jy
! Component: 2900  -  total flux cleaned = -0.00178354 Jy
! Component: 2950  -  total flux cleaned = -0.00173158 Jy
! Component: 3000  -  total flux cleaned = -0.00180059 Jy
! Component: 3050  -  total flux cleaned = -0.00188586 Jy
! Component: 3100  -  total flux cleaned = -0.00183485 Jy
! Component: 3150  -  total flux cleaned = -0.00183479 Jy
! Component: 3200  -  total flux cleaned = -0.00186838 Jy
! Component: 3250  -  total flux cleaned = -0.00188488 Jy
! Component: 3300  -  total flux cleaned = -0.00193439 Jy
! Component: 3350  -  total flux cleaned = -0.00193434 Jy
! Component: 3400  -  total flux cleaned = -0.00195082 Jy
! Component: 3450  -  total flux cleaned = -0.00191842 Jy
! Component: 3500  -  total flux cleaned = -0.00195073 Jy
! Component: 3550  -  total flux cleaned = -0.00207861 Jy
! Component: 3600  -  total flux cleaned = -0.00193538 Jy
! Component: 3650  -  total flux cleaned = -0.0020144 Jy
! Component: 3700  -  total flux cleaned = -0.00199877 Jy
! Component: 3750  -  total flux cleaned = -0.0020456 Jy
! Component: 3800  -  total flux cleaned = -0.00204554 Jy
! Component: 3850  -  total flux cleaned = -0.00204556 Jy
! Component: 3900  -  total flux cleaned = -0.00207615 Jy
! Component: 3950  -  total flux cleaned = -0.00210663 Jy
! Component: 4000  -  total flux cleaned = -0.00206096 Jy
! Component: 4050  -  total flux cleaned = -0.00206091 Jy
! Total flux subtracted in 4096 components = -0.00209097 Jy
! Clean residual min=-0.001065 max=0.000874 Jy/beam
! Clean residual mean=-0.000000 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.287401 Jy
keep
! Adding 313 model components to the UV plane model.
! The established model now contains 487 components and 0.287401 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0438+2153_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.506 x 6.938 at -2.862 degrees (North through East)
! Clean map  min=-0.0015625  max=0.22874 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0438+2153_S_map.fits
wmodel /vlbi/uf001/uva//J0438+2153_S_map.mod
! Writing 487 model components to file: /vlbi/uf001/uva//J0438+2153_S_map.mod
wobs   /vlbi/uf001/uva//J0438+2153_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0438+2153_S_uvs.fits
wwins  /vlbi/uf001/uva//J0438+2153_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0438+2153_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.228739 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000280741 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.368203 0.368203 0.736406 1.47281 2.94562 5.89125 11.7825 23.565 47.13 94.26
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.228 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  814.767 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0438+2153_S_dfm.log closed on Sun Jan 13 22:15:37 2019