! Started logfile: /vlbi/uf001/uvm//J0429+2724_S_a_dfm.log on Sun Jan 13 20:45:12 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0429+2724_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0429+2724_S_a_uvm.fits
! AN table 1: 5 integrations on 21 of 21 possible baselines.
! AN table 2: 54 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.717949 visibilities/baseline/integration-bin.
! Found source: J0429+2724
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 5460 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0429+2724_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 213 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 213 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 213 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.123336Jy  sigma=20.878369
! Fit after  self-cal, rms=0.569172Jy  sigma=10.767570
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.929 mas, bmaj=5.918 mas, bpa=-4.334 degrees
! Estimated noise=0.760616 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.333786 Jy
! Component: 100  -  total flux cleaned = 0.414612 Jy
! Total flux subtracted in 100 components = 0.414612 Jy
! Clean residual min=-0.021963 max=0.105113 Jy/beam
! Clean residual mean=-0.000103 rms=0.005177 Jy/beam
! Combined flux in latest and established models = 0.414612 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.414612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166191Jy  sigma=2.992507
! Fit after  self-cal, rms=0.166130Jy  sigma=2.991413
! Inverting map 
! Added new window around map position (-6.5, -3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0842537 Jy
! Component: 100  -  total flux cleaned = 0.122423 Jy
! Total flux subtracted in 100 components = 0.122423 Jy
! Clean residual min=-0.012738 max=0.025192 Jy/beam
! Clean residual mean=-0.000058 rms=0.002822 Jy/beam
! Combined flux in latest and established models = 0.537035 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 0.537035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104620Jy  sigma=1.889378
! Fit after  self-cal, rms=0.098111Jy  sigma=1.761940
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0309646 Jy
! Component: 100  -  total flux cleaned = 0.0504528 Jy
! Total flux subtracted in 100 components = 0.0504528 Jy
! Clean residual min=-0.009005 max=0.011866 Jy/beam
! Clean residual mean=-0.000037 rms=0.001844 Jy/beam
! Combined flux in latest and established models = 0.587488 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 31 components and 0.587488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082426Jy  sigma=1.480920
! Fit after  self-cal, rms=0.081819Jy  sigma=1.469694
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151197 Jy
! Component: 100  -  total flux cleaned = 0.0258029 Jy
! Total flux subtracted in 100 components = 0.0258029 Jy
! Clean residual min=-0.007305 max=0.009238 Jy/beam
! Clean residual mean=-0.000027 rms=0.001600 Jy/beam
! Combined flux in latest and established models = 0.613291 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 38 components and 0.613291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076960Jy  sigma=1.381041
! Fit after  self-cal, rms=0.076824Jy  sigma=1.378570
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.46 mas, bmaj=6.909 mas, bpa=-3.114 degrees
! Estimated noise=0.62631 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140932 Jy
! Component: 100  -  total flux cleaned = 0.023885 Jy
! Component: 150  -  total flux cleaned = 0.0310309 Jy
! Component: 200  -  total flux cleaned = 0.0364352 Jy
! Total flux subtracted in 200 components = 0.0364352 Jy
! Clean residual min=-0.005982 max=0.010193 Jy/beam
! Clean residual mean=-0.000014 rms=0.001565 Jy/beam
! Combined flux in latest and established models = 0.649726 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 63 components and 0.649726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073432Jy  sigma=1.316450
! Fit after  self-cal, rms=0.073321Jy  sigma=1.314335
! Inverting map 
! Added new window around map position (8.5, 4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00879228 Jy
! Component: 100  -  total flux cleaned = 0.0118637 Jy
! Component: 150  -  total flux cleaned = 0.0137801 Jy
! Component: 200  -  total flux cleaned = 0.0148201 Jy
! Total flux subtracted in 200 components = 0.0148201 Jy
! Clean residual min=-0.005633 max=0.005416 Jy/beam
! Clean residual mean=-0.000007 rms=0.001420 Jy/beam
! Combined flux in latest and established models = 0.664546 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 89 components and 0.664546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072042Jy  sigma=1.288979
! Fit after  self-cal, rms=0.071982Jy  sigma=1.288007
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.46 x 6.909 at -3.114 degrees (North through East)
! Clean map  min=-0.0055849  max=0.43384 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     HN        1.20     LA        0.95     NL        1.17     
!   OV        1.11     PT        1.11     SC        1.09     
! 
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.96     HN        0.96     KP        1.01     
!   LA        0.95     MK        1.02     NL        1.04     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     HN        1.10     LA        1.01     NL        1.32     
!   OV        1.07     PT        1.05     SC        1.14     
! 
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.95     HN        0.98     KP        1.02     
!   LA        0.95     MK        1.03     NL        1.06     OV        0.98     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        1.13     LA        1.02     NL        1.38     
!   OV        1.10     PT        1.11     SC        1.08     
! 
!  A total of 21 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.98     HN        0.99     KP        1.01     
!   LA        0.95     MK        1.03     NL        1.10     OV        0.99     
!   PT        1.01     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.071982Jy  sigma=1.288007
! Fit after  self-cal, rms=0.066672Jy  sigma=1.176498
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.453 mas, bmaj=6.88 mas, bpa=-2.725 degrees
! Estimated noise=0.636945 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00484884 Jy
! Component: 100  -  total flux cleaned = -0.00658263 Jy
! Component: 150  -  total flux cleaned = -0.00795529 Jy
! Component: 200  -  total flux cleaned = -0.00888325 Jy
! Total flux subtracted in 200 components = -0.00888325 Jy
! Clean residual min=-0.003826 max=0.004565 Jy/beam
! Clean residual mean=0.000008 rms=0.000938 Jy/beam
! Combined flux in latest and established models = 0.655663 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 116 components and 0.655663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066257Jy  sigma=1.168265
! Fit after  self-cal, rms=0.066249Jy  sigma=1.167944
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066249Jy  sigma=1.167944
! Fit after  self-cal, rms=0.062520Jy  sigma=1.082596
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.454 mas, bmaj=6.863 mas, bpa=-2.823 degrees
! Estimated noise=0.637019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0023026 Jy
! Component: 100  -  total flux cleaned = -0.00304857 Jy
! Component: 150  -  total flux cleaned = -0.0036659 Jy
! Component: 200  -  total flux cleaned = -0.00424213 Jy
! Total flux subtracted in 200 components = -0.00424213 Jy
! Clean residual min=-0.003060 max=0.003104 Jy/beam
! Clean residual mean=0.000006 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.651421 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 135 components and 0.651421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062331Jy  sigma=1.078927
! Fit after  self-cal, rms=0.062335Jy  sigma=1.078791
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (30, 21).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00216412 Jy
! Component: 100  -  total flux cleaned = 0.00261287 Jy
! Component: 150  -  total flux cleaned = 0.00256403 Jy
! Component: 200  -  total flux cleaned = 0.00252269 Jy
! Total flux subtracted in 200 components = 0.00252269 Jy
! Clean residual min=-0.002979 max=0.002689 Jy/beam
! Clean residual mean=0.000005 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.653944 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 157 components and 0.653943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062192Jy  sigma=1.076057
! Fit after  self-cal, rms=0.062188Jy  sigma=1.075918
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062188Jy  sigma=1.075918
! Fit after  self-cal, rms=0.062241Jy  sigma=1.075068
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.453 mas, bmaj=6.859 mas, bpa=-2.802 degrees
! Estimated noise=0.637446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00101958 Jy
! Component: 100  -  total flux cleaned = -0.00106892 Jy
! Component: 150  -  total flux cleaned = -0.00116503 Jy
! Component: 200  -  total flux cleaned = -0.00133558 Jy
! Total flux subtracted in 200 components = -0.00133558 Jy
! Clean residual min=-0.002924 max=0.002611 Jy/beam
! Clean residual mean=0.000005 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.652608 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 166 components and 0.652608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062162Jy  sigma=1.073551
! Fit after  self-cal, rms=0.062163Jy  sigma=1.073523
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.52382e-05 Jy
! Component: 100  -  total flux cleaned = -3.15097e-05 Jy
! Component: 150  -  total flux cleaned = -6.77387e-05 Jy
! Component: 200  -  total flux cleaned = -0.000101323 Jy
! Total flux subtracted in 200 components = -0.000101323 Jy
! Clean residual min=-0.002913 max=0.002661 Jy/beam
! Clean residual mean=0.000005 rms=0.000652 Jy/beam
! Combined flux in latest and established models = 0.652506 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 177 components and 0.652506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062126Jy  sigma=1.072808
! Fit after  self-cal, rms=0.062125Jy  sigma=1.072790
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062125Jy  sigma=1.072790
! Fit after  self-cal, rms=0.062182Jy  sigma=1.072529
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.151 mas, bmaj=9.805 mas, bpa=-4.125 degrees
! Estimated noise=0.809985 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141195 Jy
! Component: 100  -  total flux cleaned = -0.00189062 Jy
! Component: 150  -  total flux cleaned = -0.00220718 Jy
! Component: 200  -  total flux cleaned = -0.0023797 Jy
! Total flux subtracted in 200 components = -0.0023797 Jy
! Clean residual min=-0.002774 max=0.002830 Jy/beam
! Clean residual mean=0.000009 rms=0.000761 Jy/beam
! Combined flux in latest and established models = 0.650127 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 191 components and 0.650127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062160Jy  sigma=1.072087
! Fit after  self-cal, rms=0.062160Jy  sigma=1.072053
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000173272 Jy
! Component: 100  -  total flux cleaned = -0.000288156 Jy
! Component: 150  -  total flux cleaned = -0.000372797 Jy
! Component: 200  -  total flux cleaned = -0.000451805 Jy
! Total flux subtracted in 200 components = -0.000451805 Jy
! Clean residual min=-0.002804 max=0.002814 Jy/beam
! Clean residual mean=0.000009 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.649675 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 203 components and 0.649675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062157Jy  sigma=1.071998
! Fit after  self-cal, rms=0.062156Jy  sigma=1.071977
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.452 mas, bmaj=6.857 mas, bpa=-2.789 degrees
! Estimated noise=0.637797 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.452 x 6.857 at -2.789 degrees (North through East)
! Clean map  min=-0.0028032  max=0.43469 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.928 mas, bmaj=5.894 mas, bpa=-4.162 degrees
! Estimated noise=0.769352 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.336721 Jy
! Component: 100  -  total flux cleaned = 0.448927 Jy
! Component: 150  -  total flux cleaned = 0.50915 Jy
! Component: 200  -  total flux cleaned = 0.546908 Jy
! Total flux subtracted in 200 components = 0.546908 Jy
! Clean residual min=-0.006807 max=0.020231 Jy/beam
! Clean residual mean=-0.000037 rms=0.001779 Jy/beam
! Combined flux in latest and established models = 0.546908 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.546908 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.452 mas, bmaj=6.857 mas, bpa=-2.789 degrees
! Estimated noise=0.637797 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0346058 Jy
! Component: 100  -  total flux cleaned = 0.0552081 Jy
! Component: 150  -  total flux cleaned = 0.0683886 Jy
! Component: 200  -  total flux cleaned = 0.0774009 Jy
! Total flux subtracted in 200 components = 0.0774009 Jy
! Clean residual min=-0.003464 max=0.005258 Jy/beam
! Clean residual mean=-0.000008 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.624309 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 52 components and 0.624308 Jy
! Inverting map 
! Added new window around map position (-10, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0064538 Jy
! Component: 100  -  total flux cleaned = 0.0112459 Jy
! Component: 150  -  total flux cleaned = 0.015046 Jy
! Component: 200  -  total flux cleaned = 0.0179542 Jy
! Total flux subtracted in 200 components = 0.0179542 Jy
! Clean residual min=-0.003163 max=0.002842 Jy/beam
! Clean residual mean=-0.000000 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.642263 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 80 components and 0.642263 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.151 mas, bmaj=9.805 mas, bpa=-4.125 degrees
! Estimated noise=0.809985 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00368613 Jy
! Component: 100  -  total flux cleaned = 0.00459004 Jy
! Component: 150  -  total flux cleaned = 0.00517902 Jy
! Component: 200  -  total flux cleaned = 0.00568157 Jy
! Total flux subtracted in 200 components = 0.00568157 Jy
! Clean residual min=-0.003201 max=0.002946 Jy/beam
! Clean residual mean=0.000006 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.647944 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000378678 Jy
! Component: 100  -  total flux cleaned = 0.000713555 Jy
! Component: 150  -  total flux cleaned = 0.00100894 Jy
! Component: 200  -  total flux cleaned = 0.00114582 Jy
! Total flux subtracted in 200 components = 0.00114582 Jy
! Clean residual min=-0.002989 max=0.002840 Jy/beam
! Clean residual mean=0.000008 rms=0.000763 Jy/beam
! Combined flux in latest and established models = 0.64909 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 153 components and 0.64909 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.452 mas, bmaj=6.857 mas, bpa=-2.789 degrees
! Estimated noise=0.637797 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000480689 Jy
! Component: 100  -  total flux cleaned = 0.000356302 Jy
! Component: 150  -  total flux cleaned = 0.000357963 Jy
! Component: 200  -  total flux cleaned = 0.000303938 Jy
! Total flux subtracted in 200 components = 0.000303938 Jy
! Clean residual min=-0.003073 max=0.002690 Jy/beam
! Clean residual mean=0.000004 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.649394 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 177 components and 0.649394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062218Jy  sigma=1.074147
! Fit after  self-cal, rms=0.062193Jy  sigma=1.073460
wmodel J0429+2724_S_a_map.mod
! Writing 177 model components to file: J0429+2724_S_a_map.mod
wobs   J0429+2724_S_a_uvs.fits
! Writing UV FITS file: J0429+2724_S_a_uvs.fits
wwins  J0429+2724_S_a_map.win
! wwins: Wrote 5 windows to J0429+2724_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00074785 Jy
! Component: 100  -  total flux cleaned = -0.00108252 Jy
! Component: 150  -  total flux cleaned = -0.000994251 Jy
! Component: 200  -  total flux cleaned = -0.000952041 Jy
! Component: 250  -  total flux cleaned = -0.000827331 Jy
! Component: 300  -  total flux cleaned = -0.000622879 Jy
! Component: 350  -  total flux cleaned = -0.000462539 Jy
! Component: 400  -  total flux cleaned = -0.000344278 Jy
! Component: 450  -  total flux cleaned = -0.000266479 Jy
! Component: 500  -  total flux cleaned = -0.000304405 Jy
! Component: 550  -  total flux cleaned = -0.00034165 Jy
! Component: 600  -  total flux cleaned = -0.000305155 Jy
! Component: 650  -  total flux cleaned = -0.000415119 Jy
! Component: 700  -  total flux cleaned = -0.000523481 Jy
! Component: 750  -  total flux cleaned = -0.000523253 Jy
! Component: 800  -  total flux cleaned = -0.000558378 Jy
! Component: 850  -  total flux cleaned = -0.000488381 Jy
! Component: 900  -  total flux cleaned = -0.000592625 Jy
! Component: 950  -  total flux cleaned = -0.000524045 Jy
! Component: 1000  -  total flux cleaned = -0.000592118 Jy
! Component: 1050  -  total flux cleaned = -0.000558932 Jy
! Component: 1100  -  total flux cleaned = -0.000592071 Jy
! Component: 1150  -  total flux cleaned = -0.000526331 Jy
! Component: 1200  -  total flux cleaned = -0.000558894 Jy
! Component: 1250  -  total flux cleaned = -0.000558696 Jy
! Component: 1300  -  total flux cleaned = -0.000591023 Jy
! Component: 1350  -  total flux cleaned = -0.000494903 Jy
! Component: 1400  -  total flux cleaned = -0.000494877 Jy
! Component: 1450  -  total flux cleaned = -0.000558164 Jy
! Component: 1500  -  total flux cleaned = -0.000402066 Jy
! Component: 1550  -  total flux cleaned = -0.000401947 Jy
! Component: 1600  -  total flux cleaned = -0.000433229 Jy
! Component: 1650  -  total flux cleaned = -0.000494402 Jy
! Component: 1700  -  total flux cleaned = -0.000433563 Jy
! Component: 1750  -  total flux cleaned = -0.0004033 Jy
! Component: 1800  -  total flux cleaned = -0.000493127 Jy
! Component: 1850  -  total flux cleaned = -0.000344631 Jy
! Component: 1900  -  total flux cleaned = -0.000403971 Jy
! Component: 1950  -  total flux cleaned = -0.000521037 Jy
! Component: 2000  -  total flux cleaned = -0.000433727 Jy
! Component: 2050  -  total flux cleaned = -0.000462343 Jy
! Component: 2100  -  total flux cleaned = -0.000462279 Jy
! Component: 2150  -  total flux cleaned = -0.00046243 Jy
! Component: 2200  -  total flux cleaned = -0.000462145 Jy
! Component: 2250  -  total flux cleaned = -0.000575187 Jy
! Component: 2300  -  total flux cleaned = -0.000575168 Jy
! Component: 2350  -  total flux cleaned = -0.000519097 Jy
! Component: 2400  -  total flux cleaned = -0.000574846 Jy
! Component: 2450  -  total flux cleaned = -0.000712904 Jy
! Component: 2500  -  total flux cleaned = -0.000603342 Jy
! Component: 2550  -  total flux cleaned = -0.000685427 Jy
! Component: 2600  -  total flux cleaned = -0.000576652 Jy
! Component: 2650  -  total flux cleaned = -0.000657746 Jy
! Component: 2700  -  total flux cleaned = -0.000630926 Jy
! Component: 2750  -  total flux cleaned = -0.000710844 Jy
! Component: 2800  -  total flux cleaned = -0.000657691 Jy
! Component: 2850  -  total flux cleaned = -0.000551715 Jy
! Component: 2900  -  total flux cleaned = -0.000735851 Jy
! Component: 2950  -  total flux cleaned = -0.000788281 Jy
! Component: 3000  -  total flux cleaned = -0.000813954 Jy
! Component: 3050  -  total flux cleaned = -0.000839892 Jy
! Component: 3100  -  total flux cleaned = -0.000762561 Jy
! Component: 3150  -  total flux cleaned = -0.000839699 Jy
! Component: 3200  -  total flux cleaned = -0.00094175 Jy
! Component: 3250  -  total flux cleaned = -0.00106865 Jy
! Component: 3300  -  total flux cleaned = -0.00109387 Jy
! Component: 3350  -  total flux cleaned = -0.00101826 Jy
! Component: 3400  -  total flux cleaned = -0.000968115 Jy
! Component: 3450  -  total flux cleaned = -0.000943235 Jy
! Component: 3500  -  total flux cleaned = -0.000967898 Jy
! Component: 3550  -  total flux cleaned = -0.00106672 Jy
! Component: 3600  -  total flux cleaned = -0.0011652 Jy
! Component: 3650  -  total flux cleaned = -0.00104269 Jy
! Component: 3700  -  total flux cleaned = -0.0010915 Jy
! Component: 3750  -  total flux cleaned = -0.00113999 Jy
! Component: 3800  -  total flux cleaned = -0.00114023 Jy
! Component: 3850  -  total flux cleaned = -0.00118833 Jy
! Component: 3900  -  total flux cleaned = -0.00130822 Jy
! Component: 3950  -  total flux cleaned = -0.00133206 Jy
! Component: 4000  -  total flux cleaned = -0.00135572 Jy
! Component: 4050  -  total flux cleaned = -0.00133218 Jy
! Total flux subtracted in 4096 components = -0.00140277 Jy
! Clean residual min=-0.001931 max=0.001566 Jy/beam
! Clean residual mean=0.000003 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.647991 Jy
keep
! Adding 334 model components to the UV plane model.
! The established model now contains 511 components and 0.647992 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0429+2724_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.452 x 6.857 at -2.789 degrees (North through East)
! Clean map  min=-0.0025517  max=0.4347 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0429+2724_S_a_map.fits
wmodel /vlbi/uf001/uvm//J0429+2724_S_a_map.mod
! Writing 511 model components to file: /vlbi/uf001/uvm//J0429+2724_S_a_map.mod
wobs   /vlbi/uf001/uvm//J0429+2724_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0429+2724_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J0429+2724_S_a_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uvm//J0429+2724_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.434698 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000447646 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.308936 0.308936 0.617872 1.23574 2.47149 4.94298 9.88596 19.7719 39.5438 79.0877
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.434 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  971.074 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0429+2724_S_a_dfm.log closed on Sun Jan 13 20:45:16 2019