! Started logfile: /vlbi/uf001/uvm//J0429+1815_S_a_dfm.log on Sun Jan 13 20:44:57 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0429+1815_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0429+1815_S_a_uvm.fits
! AN table 1: 88 integrations on 28 of 28 possible baselines.
! AN table 2: 118 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.919556 visibilities/baseline/integration-bin.
! Found source: J0429+1815
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 15912 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0429+1815_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 85 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 85 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 85 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.006094Jy  sigma=23.403754
! Fit after  self-cal, rms=0.887454Jy  sigma=20.693980
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.952 mas, bmaj=10.36 mas, bpa=-23.22 degrees
! Estimated noise=0.403803 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.079731 Jy
! Component: 100  -  total flux cleaned = 0.106288 Jy
! Total flux subtracted in 100 components = 0.106288 Jy
! Clean residual min=-0.005476 max=0.013756 Jy/beam
! Clean residual mean=-0.000024 rms=0.001841 Jy/beam
! Combined flux in latest and established models = 0.106288 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.106288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067765Jy  sigma=1.418326
! Fit after  self-cal, rms=0.067519Jy  sigma=1.413578
! Inverting map 
! Added new window around map position (-5.5, -3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152975 Jy
! Component: 100  -  total flux cleaned = 0.0251306 Jy
! Total flux subtracted in 100 components = 0.0251306 Jy
! Clean residual min=-0.004422 max=0.005400 Jy/beam
! Clean residual mean=-0.000016 rms=0.001227 Jy/beam
! Combined flux in latest and established models = 0.131419 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 25 components and 0.131419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062280Jy  sigma=1.296818
! Fit after  self-cal, rms=0.062107Jy  sigma=1.292990
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.631 mas, bmaj=10.64 mas, bpa=-21.36 degrees
! Estimated noise=0.248241 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100291 Jy
! Component: 100  -  total flux cleaned = 0.0159114 Jy
! Component: 150  -  total flux cleaned = 0.0196815 Jy
! Component: 200  -  total flux cleaned = 0.0217583 Jy
! Total flux subtracted in 200 components = 0.0217583 Jy
! Clean residual min=-0.003250 max=0.003898 Jy/beam
! Clean residual mean=-0.000014 rms=0.000921 Jy/beam
! Combined flux in latest and established models = 0.153177 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 47 components and 0.153177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060111Jy  sigma=1.252732
! Fit after  self-cal, rms=0.060053Jy  sigma=1.251662
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.631 x 10.64 at -21.36 degrees (North through East)
! Clean map  min=-0.0030288  max=0.10752 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     HN        1.00     KP        1.05     LA        0.95     
!   MK        1.12     NL        1.09     OV        1.02     PT        1.09     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        0.98     HN        0.98     KP        0.94     
!   LA        0.92     MK        0.96     NL        1.04     OV        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     HN        1.01     KP        1.08     LA        0.94     
!   MK        1.12     NL        1.16     OV        0.91     PT        1.10     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.82     FD        1.00     HN        0.99     KP        0.96     
!   LA        0.93     MK        0.93     NL        0.96     OV        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        1.03     KP        1.07     LA        0.95     
!   MK        1.07     NL        1.09     OV        1.02     PT        1.11     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        1.00     HN        0.96     KP        0.97     
!   LA        0.91     MK        0.98     NL        1.08     OV        1.00     
! 
! 
! Fit before self-cal, rms=0.060053Jy  sigma=1.251662
! Fit after  self-cal, rms=0.056972Jy  sigma=1.219709
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.659 mas, bmaj=10.5 mas, bpa=-21.49 degrees
! Estimated noise=0.247624 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000370046 Jy
! Component: 100  -  total flux cleaned = -0.000565597 Jy
! Component: 150  -  total flux cleaned = -0.000566981 Jy
! Component: 200  -  total flux cleaned = -0.000464072 Jy
! Total flux subtracted in 200 components = -0.000464072 Jy
! Clean residual min=-0.002013 max=0.002131 Jy/beam
! Clean residual mean=-0.000001 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.152713 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 73 components and 0.152713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056921Jy  sigma=1.218739
! Fit after  self-cal, rms=0.056926Jy  sigma=1.218286
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056926Jy  sigma=1.218286
! Fit after  self-cal, rms=0.055384Jy  sigma=1.202940
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.668 mas, bmaj=10.47 mas, bpa=-21.46 degrees
! Estimated noise=0.247472 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139213 Jy
! Component: 100  -  total flux cleaned = 0.000140516 Jy
! Component: 150  -  total flux cleaned = 0.000199173 Jy
! Component: 200  -  total flux cleaned = 0.000183262 Jy
! Total flux subtracted in 200 components = 0.000183262 Jy
! Clean residual min=-0.001250 max=0.002019 Jy/beam
! Clean residual mean=-0.000000 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.152896 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 96 components and 0.152896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055356Jy  sigma=1.202350
! Fit after  self-cal, rms=0.055350Jy  sigma=1.202109
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-15.5, -7.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191345 Jy
! Component: 100  -  total flux cleaned = 0.0027646 Jy
! Component: 150  -  total flux cleaned = 0.00327728 Jy
! Component: 200  -  total flux cleaned = 0.00364824 Jy
! Total flux subtracted in 200 components = 0.00364824 Jy
! Clean residual min=-0.001108 max=0.000984 Jy/beam
! Clean residual mean=0.000000 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.156544 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 140 components and 0.156544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055283Jy  sigma=1.200293
! Fit after  self-cal, rms=0.055279Jy  sigma=1.200164
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055279Jy  sigma=1.200164
! Fit after  self-cal, rms=0.055233Jy  sigma=1.199996
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.666 mas, bmaj=10.46 mas, bpa=-21.5 degrees
! Estimated noise=0.247116 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000426229 Jy
! Component: 100  -  total flux cleaned = 0.000764659 Jy
! Component: 150  -  total flux cleaned = 0.000999965 Jy
! Component: 200  -  total flux cleaned = 0.00122617 Jy
! Total flux subtracted in 200 components = 0.00122617 Jy
! Clean residual min=-0.001042 max=0.000991 Jy/beam
! Clean residual mean=0.000001 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.157771 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 161 components and 0.157771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055215Jy  sigma=1.199606
! Fit after  self-cal, rms=0.055215Jy  sigma=1.199578
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000226909 Jy
! Component: 100  -  total flux cleaned = 0.00046088 Jy
! Component: 150  -  total flux cleaned = 0.000613521 Jy
! Component: 200  -  total flux cleaned = 0.000739237 Jy
! Total flux subtracted in 200 components = 0.000739237 Jy
! Clean residual min=-0.001060 max=0.000975 Jy/beam
! Clean residual mean=0.000001 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.15851 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 176 components and 0.15851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055207Jy  sigma=1.199424
! Fit after  self-cal, rms=0.055207Jy  sigma=1.199408
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055207Jy  sigma=1.199408
! Fit after  self-cal, rms=0.055210Jy  sigma=1.199350
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.404 mas, bmaj=11.22 mas, bpa=-16.14 degrees
! Estimated noise=0.29609 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000222485 Jy
! Component: 100  -  total flux cleaned = 0.000531391 Jy
! Component: 150  -  total flux cleaned = 0.000810368 Jy
! Component: 200  -  total flux cleaned = 0.00100038 Jy
! Total flux subtracted in 200 components = 0.00100038 Jy
! Clean residual min=-0.001328 max=0.001261 Jy/beam
! Clean residual mean=0.000001 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.15951 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 214 components and 0.15951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055205Jy  sigma=1.199235
! Fit after  self-cal, rms=0.055205Jy  sigma=1.199217
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000150991 Jy
! Component: 100  -  total flux cleaned = 0.000340829 Jy
! Component: 150  -  total flux cleaned = 0.000503137 Jy
! Component: 200  -  total flux cleaned = 0.000590321 Jy
! Total flux subtracted in 200 components = 0.000590321 Jy
! Clean residual min=-0.001332 max=0.001259 Jy/beam
! Clean residual mean=0.000001 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.160101 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 230 components and 0.160101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055202Jy  sigma=1.199179
! Fit after  self-cal, rms=0.055202Jy  sigma=1.199167
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.664 mas, bmaj=10.46 mas, bpa=-21.53 degrees
! Estimated noise=0.246956 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.664 x 10.46 at -21.53 degrees (North through East)
! Clean map  min=-0.0010346  max=0.10672 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.985 mas, bmaj=10.17 mas, bpa=-23.36 degrees
! Estimated noise=0.409879 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0806721 Jy
! Component: 100  -  total flux cleaned = 0.107792 Jy
! Component: 150  -  total flux cleaned = 0.122828 Jy
! Component: 200  -  total flux cleaned = 0.132345 Jy
! Total flux subtracted in 200 components = 0.132345 Jy
! Clean residual min=-0.002444 max=0.005052 Jy/beam
! Clean residual mean=-0.000006 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.132345 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.132345 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.664 mas, bmaj=10.46 mas, bpa=-21.53 degrees
! Estimated noise=0.246956 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0078401 Jy
! Component: 100  -  total flux cleaned = 0.0123113 Jy
! Component: 150  -  total flux cleaned = 0.0152421 Jy
! Component: 200  -  total flux cleaned = 0.0173884 Jy
! Total flux subtracted in 200 components = 0.0173884 Jy
! Clean residual min=-0.001262 max=0.001490 Jy/beam
! Clean residual mean=-0.000001 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.149734 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 62 components and 0.149734 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.404 mas, bmaj=11.22 mas, bpa=-16.14 degrees
! Estimated noise=0.29609 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270184 Jy
! Component: 100  -  total flux cleaned = 0.00460376 Jy
! Component: 150  -  total flux cleaned = 0.0060416 Jy
! Component: 200  -  total flux cleaned = 0.00715227 Jy
! Total flux subtracted in 200 components = 0.00715227 Jy
! Clean residual min=-0.001323 max=0.001415 Jy/beam
! Clean residual mean=-0.000000 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.156886 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000710176 Jy
! Component: 100  -  total flux cleaned = 0.00115858 Jy
! Component: 150  -  total flux cleaned = 0.00154643 Jy
! Component: 200  -  total flux cleaned = 0.00188492 Jy
! Total flux subtracted in 200 components = 0.00188492 Jy
! Clean residual min=-0.001330 max=0.001231 Jy/beam
! Clean residual mean=0.000001 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.158771 Jy
! Adding 170 model components to the UV plane model.
! The established model now contains 225 components and 0.158771 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.664 mas, bmaj=10.46 mas, bpa=-21.53 degrees
! Estimated noise=0.246956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.20956e-05 Jy
! Component: 100  -  total flux cleaned = 0.000196822 Jy
! Component: 150  -  total flux cleaned = 0.000335309 Jy
! Component: 200  -  total flux cleaned = 0.000492896 Jy
! Total flux subtracted in 200 components = 0.000492896 Jy
! Clean residual min=-0.001094 max=0.000908 Jy/beam
! Clean residual mean=0.000001 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.159264 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 238 components and 0.159264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055216Jy  sigma=1.199430
! Fit after  self-cal, rms=0.055211Jy  sigma=1.199325
wmodel J0429+1815_S_a_map.mod
! Writing 238 model components to file: J0429+1815_S_a_map.mod
wobs   J0429+1815_S_a_uvs.fits
! Writing UV FITS file: J0429+1815_S_a_uvs.fits
wwins  J0429+1815_S_a_map.win
! wwins: Wrote 3 windows to J0429+1815_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -6.86918e-05 Jy
! Component: 100  -  total flux cleaned = 7.53084e-05 Jy
! Component: 150  -  total flux cleaned = 0.000196327 Jy
! Component: 200  -  total flux cleaned = 0.000239841 Jy
! Component: 250  -  total flux cleaned = 0.000295868 Jy
! Component: 300  -  total flux cleaned = 0.000363708 Jy
! Component: 350  -  total flux cleaned = 0.000429768 Jy
! Component: 400  -  total flux cleaned = 0.000494182 Jy
! Component: 450  -  total flux cleaned = 0.00059435 Jy
! Component: 500  -  total flux cleaned = 0.000655285 Jy
! Component: 550  -  total flux cleaned = 0.000702888 Jy
! Component: 600  -  total flux cleaned = 0.000702839 Jy
! Component: 650  -  total flux cleaned = 0.000714113 Jy
! Component: 700  -  total flux cleaned = 0.000758907 Jy
! Component: 750  -  total flux cleaned = 0.000802688 Jy
! Component: 800  -  total flux cleaned = 0.000802718 Jy
! Component: 850  -  total flux cleaned = 0.000792218 Jy
! Component: 900  -  total flux cleaned = 0.000792265 Jy
! Component: 950  -  total flux cleaned = 0.000792185 Jy
! Component: 1000  -  total flux cleaned = 0.000751616 Jy
! Component: 1050  -  total flux cleaned = 0.000771666 Jy
! Component: 1100  -  total flux cleaned = 0.000781544 Jy
! Component: 1150  -  total flux cleaned = 0.00076206 Jy
! Component: 1200  -  total flux cleaned = 0.000752532 Jy
! Component: 1250  -  total flux cleaned = 0.000762001 Jy
! Component: 1300  -  total flux cleaned = 0.000733819 Jy
! Component: 1350  -  total flux cleaned = 0.000733913 Jy
! Component: 1400  -  total flux cleaned = 0.000724815 Jy
! Component: 1450  -  total flux cleaned = 0.000724835 Jy
! Component: 1500  -  total flux cleaned = 0.00072478 Jy
! Component: 1550  -  total flux cleaned = 0.000680555 Jy
! Component: 1600  -  total flux cleaned = 0.000689429 Jy
! Component: 1650  -  total flux cleaned = 0.000672058 Jy
! Component: 1700  -  total flux cleaned = 0.000654895 Jy
! Component: 1750  -  total flux cleaned = 0.000663502 Jy
! Component: 1800  -  total flux cleaned = 0.000671976 Jy
! Component: 1850  -  total flux cleaned = 0.000704997 Jy
! Component: 1900  -  total flux cleaned = 0.000663879 Jy
! Component: 1950  -  total flux cleaned = 0.00071286 Jy
! Component: 2000  -  total flux cleaned = 0.000728798 Jy
! Component: 2050  -  total flux cleaned = 0.000704863 Jy
! Component: 2100  -  total flux cleaned = 0.000728448 Jy
! Component: 2150  -  total flux cleaned = 0.00072066 Jy
! Component: 2200  -  total flux cleaned = 0.000728384 Jy
! Component: 2250  -  total flux cleaned = 0.000766843 Jy
! Component: 2300  -  total flux cleaned = 0.000743965 Jy
! Component: 2350  -  total flux cleaned = 0.000766538 Jy
! Component: 2400  -  total flux cleaned = 0.000796467 Jy
! Component: 2450  -  total flux cleaned = 0.00078898 Jy
! Component: 2500  -  total flux cleaned = 0.000803768 Jy
! Component: 2550  -  total flux cleaned = 0.000796401 Jy
! Component: 2600  -  total flux cleaned = 0.000825272 Jy
! Component: 2650  -  total flux cleaned = 0.00083234 Jy
! Component: 2700  -  total flux cleaned = 0.000839425 Jy
! Component: 2750  -  total flux cleaned = 0.000867693 Jy
! Component: 2800  -  total flux cleaned = 0.000867656 Jy
! Component: 2850  -  total flux cleaned = 0.000881624 Jy
! Component: 2900  -  total flux cleaned = 0.000874763 Jy
! Component: 2950  -  total flux cleaned = 0.000895393 Jy
! Component: 3000  -  total flux cleaned = 0.00092254 Jy
! Component: 3050  -  total flux cleaned = 0.000915748 Jy
! Component: 3100  -  total flux cleaned = 0.000902379 Jy
! Component: 3150  -  total flux cleaned = 0.000922277 Jy
! Component: 3200  -  total flux cleaned = 0.000915755 Jy
! Component: 3250  -  total flux cleaned = 0.000922304 Jy
! Component: 3300  -  total flux cleaned = 0.000935389 Jy
! Component: 3350  -  total flux cleaned = 0.000954746 Jy
! Component: 3400  -  total flux cleaned = 0.000929103 Jy
! Component: 3450  -  total flux cleaned = 0.000960884 Jy
! Component: 3500  -  total flux cleaned = 0.000948203 Jy
! Component: 3550  -  total flux cleaned = 0.00094193 Jy
! Component: 3600  -  total flux cleaned = 0.000954359 Jy
! Component: 3650  -  total flux cleaned = 0.000929555 Jy
! Component: 3700  -  total flux cleaned = 0.000929571 Jy
! Component: 3750  -  total flux cleaned = 0.000905084 Jy
! Component: 3800  -  total flux cleaned = 0.000917236 Jy
! Component: 3850  -  total flux cleaned = 0.000911187 Jy
! Component: 3900  -  total flux cleaned = 0.000887113 Jy
! Component: 3950  -  total flux cleaned = 0.00086915 Jy
! Component: 4000  -  total flux cleaned = 0.000863246 Jy
! Component: 4050  -  total flux cleaned = 0.000851416 Jy
! Total flux subtracted in 4096 components = 0.000863193 Jy
! Clean residual min=-0.000337 max=0.000361 Jy/beam
! Clean residual mean=-0.000001 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.160127 Jy
keep
! Adding 339 model components to the UV plane model.
! The established model now contains 577 components and 0.160127 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0429+1815_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.664 x 10.46 at -21.53 degrees (North through East)
! Clean map  min=-0.00078579  max=0.10681 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0429+1815_S_a_map.fits
wmodel /vlbi/uf001/uvm//J0429+1815_S_a_map.mod
! Writing 577 model components to file: /vlbi/uf001/uvm//J0429+1815_S_a_map.mod
wobs   /vlbi/uf001/uvm//J0429+1815_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0429+1815_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J0429+1815_S_a_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uvm//J0429+1815_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.106807 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000116591 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.327479 0.327479 0.654959 1.30992 2.61984 5.23967 10.4793 20.9587 41.9174 83.8347
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.106 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  916.088 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0429+1815_S_a_dfm.log closed on Sun Jan 13 20:45:02 2019