! Started logfile: /vlbi/uf001/uva//J0425-1612_X_dfm.log on Sun Jan 13 22:11:05 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0425-1612_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0425-1612_X_uva.fits ! AN table 1: 97 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.691581 visibilities/baseline/integration-bin. ! Found source: J0425-1612 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 28980 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0425-1612_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 249 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004508Jy sigma=20.983581 ! Fit after self-cal, rms=0.949641Jy sigma=19.837134 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6466 mas, bmaj=1.714 mas, bpa=4.342 degrees ! Estimated noise=0.383751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341267 Jy ! Component: 100 - total flux cleaned = 0.0459181 Jy ! Total flux subtracted in 100 components = 0.0459181 Jy ! Clean residual min=-0.004031 max=0.010392 Jy/beam ! Clean residual mean=-0.000008 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.0459181 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0459181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074855Jy sigma=1.489550 ! Fit after self-cal, rms=0.073397Jy sigma=1.460069 ! Inverting map ! Added new window around map position (-23.6, -25.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112351 Jy ! Component: 100 - total flux cleaned = 0.0190287 Jy ! Total flux subtracted in 100 components = 0.0190287 Jy ! Clean residual min=-0.003754 max=0.005852 Jy/beam ! Clean residual mean=-0.000007 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.0649468 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 0.0649468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070216Jy sigma=1.382641 ! Fit after self-cal, rms=0.069792Jy sigma=1.373391 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00793629 Jy ! Component: 100 - total flux cleaned = 0.0136067 Jy ! Total flux subtracted in 100 components = 0.0136067 Jy ! Clean residual min=-0.003788 max=0.005901 Jy/beam ! Clean residual mean=-0.000007 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.0785535 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.0785535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067981Jy sigma=1.327997 ! Fit after self-cal, rms=0.067790Jy sigma=1.323590 ! Inverting map ! Added new window around map position (-1, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00639337 Jy ! Component: 100 - total flux cleaned = 0.0109937 Jy ! Total flux subtracted in 100 components = 0.0109937 Jy ! Clean residual min=-0.003616 max=0.005060 Jy/beam ! Clean residual mean=-0.000006 rms=0.000858 Jy/beam ! Combined flux in latest and established models = 0.0895473 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 38 components and 0.0895473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066621Jy sigma=1.294066 ! Fit after self-cal, rms=0.066522Jy sigma=1.291985 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.815 mas, bmaj=2.072 mas, bpa=4.3 degrees ! Estimated noise=0.203347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00914787 Jy ! Component: 100 - total flux cleaned = 0.0155579 Jy ! Component: 150 - total flux cleaned = 0.0204174 Jy ! Component: 200 - total flux cleaned = 0.0241741 Jy ! Total flux subtracted in 200 components = 0.0241741 Jy ! Clean residual min=-0.004508 max=0.005702 Jy/beam ! Clean residual mean=-0.000010 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.113721 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 73 components and 0.113721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065044Jy sigma=1.251481 ! Fit after self-cal, rms=0.064889Jy sigma=1.247520 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.815 x 2.072 at 4.3 degrees (North through East) ! Clean map min=-0.0044156 max=0.050705 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.85 HN 1.10 KP 0.96 ! LA 0.84 MK 1.41 NL 1.31 OV 0.89 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.91 HN 1.06 KP 0.93 ! LA 0.81 MK 1.33 NL 1.33 OV 0.90 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.90 HN 1.05 KP 0.94 ! LA 0.84 MK 1.23 NL 1.29 OV 0.90 ! SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.89 HN 1.10 KP 1.00 ! LA 0.85 MK 1.21 NL 1.32 OV 0.90 ! SC 1.09 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.89 HN 1.07 KP 0.96 ! LA 0.85 MK 1.11 NL 1.32 OV 0.91 ! SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.87 HN 1.10 KP 0.98 ! LA 0.83 MK 1.17 NL 1.27 OV 0.89 ! SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.87 HN 1.07 KP 0.95 ! LA 0.82 MK 1.04 NL 1.35 OV 0.88 ! SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 HN 1.06 KP 0.93 ! LA 0.85 MK 1.10 NL 1.32 OV 0.91 ! SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.88 HN 1.10 KP 0.93 ! LA 0.83 MK 1.22 NL 1.28 OV 0.94 ! SC 1.05 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.85 HN 1.08 KP 0.93 ! LA 0.89 MK 1.10 NL 1.26 OV 0.89 ! SC 1.06 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.91 HN 1.06 KP 0.88 ! LA 0.82 MK 1.09 NL 1.28 OV 0.94 ! SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.89 HN 1.05 KP 0.90 ! LA 0.84 MK 1.08 NL 1.21 OV 0.92 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.064889Jy sigma=1.247520 ! Fit after self-cal, rms=0.065320Jy sigma=1.218647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8479 mas, bmaj=2.161 mas, bpa=5.909 degrees ! Estimated noise=0.198799 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219434 Jy ! Component: 100 - total flux cleaned = 0.00253128 Jy ! Component: 150 - total flux cleaned = 0.00252339 Jy ! Component: 200 - total flux cleaned = 0.00259337 Jy ! Total flux subtracted in 200 components = 0.00259337 Jy ! Clean residual min=-0.002436 max=0.004028 Jy/beam ! Clean residual mean=-0.000003 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.116315 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.116315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065162Jy sigma=1.212989 ! Fit after self-cal, rms=0.065421Jy sigma=1.209811 ! Inverting map ! Added new window around map position (-7, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329547 Jy ! Component: 100 - total flux cleaned = 0.00451631 Jy ! Component: 150 - total flux cleaned = 0.00514791 Jy ! Component: 200 - total flux cleaned = 0.00571595 Jy ! Total flux subtracted in 200 components = 0.00571595 Jy ! Clean residual min=-0.002240 max=0.002633 Jy/beam ! Clean residual mean=-0.000003 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.122031 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 101 components and 0.122031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065238Jy sigma=1.204885 ! Fit after self-cal, rms=0.065198Jy sigma=1.204128 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065198Jy sigma=1.204128 ! Fit after self-cal, rms=0.067376Jy sigma=1.198867 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8462 mas, bmaj=2.156 mas, bpa=6.336 degrees ! Estimated noise=0.198363 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000630972 Jy ! Component: 100 - total flux cleaned = 0.000848444 Jy ! Component: 150 - total flux cleaned = 0.00114801 Jy ! Component: 200 - total flux cleaned = 0.00134842 Jy ! Total flux subtracted in 200 components = 0.00134842 Jy ! Clean residual min=-0.002016 max=0.002295 Jy/beam ! Clean residual mean=-0.000001 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.123379 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 112 components and 0.123379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067324Jy sigma=1.197582 ! Fit after self-cal, rms=0.067420Jy sigma=1.197279 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22.6, -24.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222144 Jy ! Component: 100 - total flux cleaned = 0.00336067 Jy ! Component: 150 - total flux cleaned = 0.00386748 Jy ! Component: 200 - total flux cleaned = 0.00405133 Jy ! Total flux subtracted in 200 components = 0.00405133 Jy ! Clean residual min=-0.001779 max=0.002428 Jy/beam ! Clean residual mean=-0.000000 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.12743 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 137 components and 0.12743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067335Jy sigma=1.195348 ! Fit after self-cal, rms=0.067305Jy sigma=1.195003 ! Inverting map ! Added new window around map position (2.4, 4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215525 Jy ! Component: 100 - total flux cleaned = 0.00344667 Jy ! Component: 150 - total flux cleaned = 0.00446546 Jy ! Component: 200 - total flux cleaned = 0.00528288 Jy ! Total flux subtracted in 200 components = 0.00528288 Jy ! Clean residual min=-0.001765 max=0.002121 Jy/beam ! Clean residual mean=-0.000000 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.132713 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 158 components and 0.132713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067229Jy sigma=1.192605 ! Fit after self-cal, rms=0.067181Jy sigma=1.192153 ! Inverting map ! Added new window around map position (18.2, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199451 Jy ! Component: 100 - total flux cleaned = 0.00332354 Jy ! Component: 150 - total flux cleaned = 0.00439738 Jy ! Component: 200 - total flux cleaned = 0.00517838 Jy ! Total flux subtracted in 200 components = 0.00517838 Jy ! Clean residual min=-0.001542 max=0.001758 Jy/beam ! Clean residual mean=-0.000001 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.137892 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 191 components and 0.137892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067110Jy sigma=1.189914 ! Fit after self-cal, rms=0.067077Jy sigma=1.189656 ! Inverting map ! Added new window around map position (-28.4, 31.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154171 Jy ! Component: 100 - total flux cleaned = 0.00251158 Jy ! Component: 150 - total flux cleaned = 0.00304282 Jy ! Component: 200 - total flux cleaned = 0.00349765 Jy ! Total flux subtracted in 200 components = 0.00349765 Jy ! Clean residual min=-0.001426 max=0.001514 Jy/beam ! Clean residual mean=-0.000001 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.141389 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 208 components and 0.141389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067030Jy sigma=1.188286 ! Fit after self-cal, rms=0.067021Jy sigma=1.188149 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067021Jy sigma=1.188149 ! Fit after self-cal, rms=0.067069Jy sigma=1.186159 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8378 mas, bmaj=2.135 mas, bpa=6.187 degrees ! Estimated noise=0.196731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000881057 Jy ! Component: 100 - total flux cleaned = 0.00136399 Jy ! Component: 150 - total flux cleaned = 0.00179599 Jy ! Component: 200 - total flux cleaned = 0.0021627 Jy ! Total flux subtracted in 200 components = 0.0021627 Jy ! Clean residual min=-0.001258 max=0.001468 Jy/beam ! Clean residual mean=-0.000001 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.143552 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 227 components and 0.143552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067040Jy sigma=1.185383 ! Fit after self-cal, rms=0.067040Jy sigma=1.185230 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-25.2, -24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111418 Jy ! Component: 100 - total flux cleaned = 0.00150962 Jy ! Component: 150 - total flux cleaned = 0.00176688 Jy ! Component: 200 - total flux cleaned = 0.00195161 Jy ! Total flux subtracted in 200 components = 0.00195161 Jy ! Clean residual min=-0.001257 max=0.001290 Jy/beam ! Clean residual mean=-0.000000 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.145504 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 251 components and 0.145504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067002Jy sigma=1.184319 ! Fit after self-cal, rms=0.066996Jy sigma=1.184216 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066996Jy sigma=1.184216 ! Fit after self-cal, rms=0.066729Jy sigma=1.184082 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.042 mas, bmaj=4.155 mas, bpa=9.032 degrees ! Estimated noise=0.243665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123259 Jy ! Component: 100 - total flux cleaned = 0.00212825 Jy ! Component: 150 - total flux cleaned = 0.00269135 Jy ! Component: 200 - total flux cleaned = 0.00308144 Jy ! Total flux subtracted in 200 components = 0.00308144 Jy ! Clean residual min=-0.001547 max=0.001414 Jy/beam ! Clean residual mean=-0.000001 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.148585 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 268 components and 0.148585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066719Jy sigma=1.183806 ! Fit after self-cal, rms=0.066704Jy sigma=1.183706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000665203 Jy ! Component: 100 - total flux cleaned = 0.00104272 Jy ! Component: 150 - total flux cleaned = 0.00131441 Jy ! Component: 200 - total flux cleaned = 0.00146071 Jy ! Total flux subtracted in 200 components = 0.00146071 Jy ! Clean residual min=-0.001482 max=0.001358 Jy/beam ! Clean residual mean=-0.000001 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.150046 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 279 components and 0.150046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066702Jy sigma=1.183645 ! Fit after self-cal, rms=0.066705Jy sigma=1.183610 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8353 mas, bmaj=2.129 mas, bpa=6.095 degrees ! Estimated noise=0.196219 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8353 x 2.129 at 6.095 degrees (North through East) ! Clean map min=-0.0010512 max=0.048172 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6566 mas, bmaj=1.737 mas, bpa=6.111 degrees ! Estimated noise=0.377245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0340061 Jy ! Component: 100 - total flux cleaned = 0.0508189 Jy ! Component: 150 - total flux cleaned = 0.0627618 Jy ! Component: 200 - total flux cleaned = 0.0720565 Jy ! Total flux subtracted in 200 components = 0.0720565 Jy ! Clean residual min=-0.003705 max=0.006354 Jy/beam ! Clean residual mean=-0.000004 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.0720565 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0720565 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8353 mas, bmaj=2.129 mas, bpa=6.095 degrees ! Estimated noise=0.196219 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131575 Jy ! Component: 100 - total flux cleaned = 0.0222888 Jy ! Component: 150 - total flux cleaned = 0.0289527 Jy ! Component: 200 - total flux cleaned = 0.0341861 Jy ! Total flux subtracted in 200 components = 0.0341861 Jy ! Clean residual min=-0.002916 max=0.004101 Jy/beam ! Clean residual mean=-0.000003 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.106243 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 54 components and 0.106243 Jy ! Inverting map ! Added new window around map position (0.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00454969 Jy ! Component: 100 - total flux cleaned = 0.00828255 Jy ! Component: 150 - total flux cleaned = 0.0115261 Jy ! Component: 200 - total flux cleaned = 0.0143842 Jy ! Total flux subtracted in 200 components = 0.0143842 Jy ! Clean residual min=-0.002205 max=0.002436 Jy/beam ! Clean residual mean=-0.000002 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.120627 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 88 components and 0.120627 Jy ! Inverting map ! Added new window around map position (-21.4, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264683 Jy ! Component: 100 - total flux cleaned = 0.00489947 Jy ! Component: 150 - total flux cleaned = 0.0069321 Jy ! Component: 200 - total flux cleaned = 0.00870893 Jy ! Total flux subtracted in 200 components = 0.00870893 Jy ! Clean residual min=-0.001809 max=0.001633 Jy/beam ! Clean residual mean=-0.000001 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.129336 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 125 components and 0.129336 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.042 mas, bmaj=4.155 mas, bpa=9.032 degrees ! Estimated noise=0.243665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317367 Jy ! Component: 100 - total flux cleaned = 0.00558189 Jy ! Component: 150 - total flux cleaned = 0.00734071 Jy ! Component: 200 - total flux cleaned = 0.00885737 Jy ! Total flux subtracted in 200 components = 0.00885737 Jy ! Clean residual min=-0.001801 max=0.001732 Jy/beam ! Clean residual mean=-0.000002 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.138193 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120565 Jy ! Component: 100 - total flux cleaned = 0.00221554 Jy ! Component: 150 - total flux cleaned = 0.0029716 Jy ! Component: 200 - total flux cleaned = 0.0036059 Jy ! Total flux subtracted in 200 components = 0.0036059 Jy ! Clean residual min=-0.001476 max=0.001605 Jy/beam ! Clean residual mean=-0.000002 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.141799 Jy ! Adding 108 model components to the UV plane model. ! The established model now contains 211 components and 0.141799 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8353 mas, bmaj=2.129 mas, bpa=6.095 degrees ! Estimated noise=0.196219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000816546 Jy ! Component: 100 - total flux cleaned = 0.00145932 Jy ! Component: 150 - total flux cleaned = 0.00186169 Jy ! Component: 200 - total flux cleaned = 0.00210342 Jy ! Total flux subtracted in 200 components = 0.00210342 Jy ! Clean residual min=-0.001162 max=0.001319 Jy/beam ! Clean residual mean=-0.000001 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.143902 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 239 components and 0.143902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066736Jy sigma=1.184261 ! Fit after self-cal, rms=0.066678Jy sigma=1.183735 wmodel J0425-1612_X_map.mod ! Writing 239 model components to file: J0425-1612_X_map.mod wobs J0425-1612_X_uvs.fits ! Writing UV FITS file: J0425-1612_X_uvs.fits wwins J0425-1612_X_map.win ! wwins: Wrote 11 windows to J0425-1612_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413976 Jy ! Component: 100 - total flux cleaned = 0.000557733 Jy ! Component: 150 - total flux cleaned = 0.000557967 Jy ! Component: 200 - total flux cleaned = 0.00061444 Jy ! Component: 250 - total flux cleaned = 0.000542033 Jy ! Component: 300 - total flux cleaned = 0.000559469 Jy ! Component: 350 - total flux cleaned = 0.000610611 Jy ! Component: 400 - total flux cleaned = 0.000644038 Jy ! Component: 450 - total flux cleaned = 0.000693399 Jy ! Component: 500 - total flux cleaned = 0.000741671 Jy ! Component: 550 - total flux cleaned = 0.000804946 Jy ! Component: 600 - total flux cleaned = 0.000851607 Jy ! Component: 650 - total flux cleaned = 0.000882142 Jy ! Component: 700 - total flux cleaned = 0.000926951 Jy ! Component: 750 - total flux cleaned = 0.000897155 Jy ! Component: 800 - total flux cleaned = 0.000941005 Jy ! Component: 850 - total flux cleaned = 0.000955337 Jy ! Component: 900 - total flux cleaned = 0.000941087 Jy ! Component: 950 - total flux cleaned = 0.00095533 Jy ! Component: 1000 - total flux cleaned = 0.000955493 Jy ! Component: 1050 - total flux cleaned = 0.000941713 Jy ! Component: 1100 - total flux cleaned = 0.000941796 Jy ! Component: 1150 - total flux cleaned = 0.000954973 Jy ! Component: 1200 - total flux cleaned = 0.000981595 Jy ! Component: 1250 - total flux cleaned = 0.00102088 Jy ! Component: 1300 - total flux cleaned = 0.000994764 Jy ! Component: 1350 - total flux cleaned = 0.00103314 Jy ! Component: 1400 - total flux cleaned = 0.0010077 Jy ! Component: 1450 - total flux cleaned = 0.00107079 Jy ! Component: 1500 - total flux cleaned = 0.00105821 Jy ! Component: 1550 - total flux cleaned = 0.00109509 Jy ! Component: 1600 - total flux cleaned = 0.00109509 Jy ! Component: 1650 - total flux cleaned = 0.00110724 Jy ! Component: 1700 - total flux cleaned = 0.00115539 Jy ! Component: 1750 - total flux cleaned = 0.0011553 Jy ! Component: 1800 - total flux cleaned = 0.00111994 Jy ! Component: 1850 - total flux cleaned = 0.00115505 Jy ! Component: 1900 - total flux cleaned = 0.00114339 Jy ! Component: 1950 - total flux cleaned = 0.00113202 Jy ! Component: 2000 - total flux cleaned = 0.00116612 Jy ! Component: 2050 - total flux cleaned = 0.00118862 Jy ! Component: 2100 - total flux cleaned = 0.00119982 Jy ! Component: 2150 - total flux cleaned = 0.00112207 Jy ! Component: 2200 - total flux cleaned = 0.00111108 Jy ! Component: 2250 - total flux cleaned = 0.00106734 Jy ! Component: 2300 - total flux cleaned = 0.00109996 Jy ! Component: 2350 - total flux cleaned = 0.00106788 Jy ! Component: 2400 - total flux cleaned = 0.00106784 Jy ! Component: 2450 - total flux cleaned = 0.00103605 Jy ! Component: 2500 - total flux cleaned = 0.00107803 Jy ! Component: 2550 - total flux cleaned = 0.00101529 Jy ! Component: 2600 - total flux cleaned = 0.000963456 Jy ! Component: 2650 - total flux cleaned = 0.000973807 Jy ! Component: 2700 - total flux cleaned = 0.000994107 Jy ! Component: 2750 - total flux cleaned = 0.000933327 Jy ! Component: 2800 - total flux cleaned = 0.000893047 Jy ! Component: 2850 - total flux cleaned = 0.000893067 Jy ! Component: 2900 - total flux cleaned = 0.00089316 Jy ! Component: 2950 - total flux cleaned = 0.000893158 Jy ! Component: 3000 - total flux cleaned = 0.000873445 Jy ! Component: 3050 - total flux cleaned = 0.000844256 Jy ! Component: 3100 - total flux cleaned = 0.000863559 Jy ! Component: 3150 - total flux cleaned = 0.000844455 Jy ! Component: 3200 - total flux cleaned = 0.000853987 Jy ! Component: 3250 - total flux cleaned = 0.000815954 Jy ! Component: 3300 - total flux cleaned = 0.000815936 Jy ! Component: 3350 - total flux cleaned = 0.00079712 Jy ! Component: 3400 - total flux cleaned = 0.000778471 Jy ! Component: 3450 - total flux cleaned = 0.000750758 Jy ! Component: 3500 - total flux cleaned = 0.000704947 Jy ! Component: 3550 - total flux cleaned = 0.000695815 Jy ! Component: 3600 - total flux cleaned = 0.000668631 Jy ! Component: 3650 - total flux cleaned = 0.000641605 Jy ! Component: 3700 - total flux cleaned = 0.000623691 Jy ! Component: 3750 - total flux cleaned = 0.000605838 Jy ! Component: 3800 - total flux cleaned = 0.000535116 Jy ! Component: 3850 - total flux cleaned = 0.000526304 Jy ! Component: 3900 - total flux cleaned = 0.000517585 Jy ! Component: 3950 - total flux cleaned = 0.000491516 Jy ! Component: 4000 - total flux cleaned = 0.000474237 Jy ! Component: 4050 - total flux cleaned = 0.000457089 Jy ! Total flux subtracted in 4096 components = 0.000448515 Jy ! Clean residual min=-0.000467 max=0.000479 Jy/beam ! Clean residual mean=-0.000000 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.144351 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 552 components and 0.144351 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0425-1612_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8353 x 2.129 at 6.095 degrees (North through East) ! Clean map min=-0.00085847 max=0.048043 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0425-1612_X_map.fits wmodel /vlbi/uf001/uva//J0425-1612_X_map.mod ! Writing 552 model components to file: /vlbi/uf001/uva//J0425-1612_X_map.mod wobs /vlbi/uf001/uva//J0425-1612_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0425-1612_X_uvs.fits wwins /vlbi/uf001/uva//J0425-1612_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J0425-1612_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0480427 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000151552 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.946359 0.946359 1.89272 3.78544 7.57087 15.1417 30.2835 60.567 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.048 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 317.004 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0425-1612_X_dfm.log closed on Sun Jan 13 22:11:12 2019