! Started logfile: /vlbi/uf001/uva//J0416-3403_S_dfm.log on Sun Jan 13 22:07:24 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0416-3403_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0416-3403_S_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.806481 visibilities/baseline/integration-bin.
! Found source: J0416-3403
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5226 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0416-3403_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.075456Jy  sigma=13.784339
! Fit after  self-cal, rms=0.710079Jy  sigma=9.369682
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.362 mas, bmaj=6.521 mas, bpa=-4.218 degrees
! Estimated noise=0.966523 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.217278 Jy
! Component: 100  -  total flux cleaned = 0.322839 Jy
! Total flux subtracted in 100 components = 0.322839 Jy
! Clean residual min=-0.023820 max=0.057841 Jy/beam
! Clean residual mean=0.000135 rms=0.008488 Jy/beam
! Combined flux in latest and established models = 0.322839 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.322839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.197056Jy  sigma=2.253648
! Fit after  self-cal, rms=0.195979Jy  sigma=2.239967
! Inverting map 
! Added new window around map position (3, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0669316 Jy
! Component: 100  -  total flux cleaned = 0.112078 Jy
! Total flux subtracted in 100 components = 0.112078 Jy
! Clean residual min=-0.013901 max=0.031344 Jy/beam
! Clean residual mean=0.000081 rms=0.005036 Jy/beam
! Combined flux in latest and established models = 0.434917 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 48 components and 0.434917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.151350Jy  sigma=1.645171
! Fit after  self-cal, rms=0.151129Jy  sigma=1.642700
! Inverting map 
! Added new window around map position (4, 10.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0342299 Jy
! Component: 100  -  total flux cleaned = 0.0585922 Jy
! Total flux subtracted in 100 components = 0.0585922 Jy
! Clean residual min=-0.012022 max=0.022092 Jy/beam
! Clean residual mean=0.000055 rms=0.003634 Jy/beam
! Combined flux in latest and established models = 0.493509 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 68 components and 0.493509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.135933Jy  sigma=1.443666
! Fit after  self-cal, rms=0.135746Jy  sigma=1.440596
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.84 mas, bmaj=7.529 mas, bpa=-4.546 degrees
! Estimated noise=0.780252 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, -6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0315312 Jy
! Component: 100  -  total flux cleaned = 0.0522603 Jy
! Component: 150  -  total flux cleaned = 0.0673567 Jy
! Component: 200  -  total flux cleaned = 0.0786107 Jy
! Total flux subtracted in 200 components = 0.0786107 Jy
! Clean residual min=-0.009358 max=0.014049 Jy/beam
! Clean residual mean=0.000040 rms=0.003287 Jy/beam
! Combined flux in latest and established models = 0.57212 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 131 components and 0.57212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124559Jy  sigma=1.313011
! Fit after  self-cal, rms=0.124484Jy  sigma=1.311860
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.84 x 7.529 at -4.546 degrees (North through East)
! Clean map  min=-0.0091108  max=0.2771 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.98     HN        1.32     KP        0.99     
!   LA        0.93     MK        1.00     NL        1.08     OV        0.97     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        0.98     HN        1.25     KP        1.01     
!   LA        0.96     MK        1.00     NL        1.12     OV        0.99     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.30     KP        1.01     
!   LA        0.95     MK        1.07     NL        1.08     OV        0.98     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.124484Jy  sigma=1.311860
! Fit after  self-cal, rms=0.118888Jy  sigma=1.255630
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.865 mas, bmaj=7.496 mas, bpa=-3.769 degrees
! Estimated noise=0.784733 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00818298 Jy
! Component: 100  -  total flux cleaned = -0.00989978 Jy
! Component: 150  -  total flux cleaned = -0.0113013 Jy
! Component: 200  -  total flux cleaned = -0.0118308 Jy
! Total flux subtracted in 200 components = -0.0118308 Jy
! Clean residual min=-0.007328 max=0.007287 Jy/beam
! Clean residual mean=0.000025 rms=0.002058 Jy/beam
! Combined flux in latest and established models = 0.560289 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 154 components and 0.560289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117709Jy  sigma=1.243618
! Fit after  self-cal, rms=0.117748Jy  sigma=1.243256
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117748Jy  sigma=1.243256
! Fit after  self-cal, rms=0.114491Jy  sigma=1.195372
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.877 mas, bmaj=7.485 mas, bpa=-3.581 degrees
! Estimated noise=0.789436 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00114025 Jy
! Component: 100  -  total flux cleaned = -0.0015865 Jy
! Component: 150  -  total flux cleaned = -0.00210697 Jy
! Component: 200  -  total flux cleaned = -0.00257443 Jy
! Total flux subtracted in 200 components = -0.00257443 Jy
! Clean residual min=-0.005768 max=0.004929 Jy/beam
! Clean residual mean=0.000019 rms=0.001461 Jy/beam
! Combined flux in latest and established models = 0.557714 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 171 components and 0.557714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114129Jy  sigma=1.191132
! Fit after  self-cal, rms=0.114180Jy  sigma=1.191021
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000305094 Jy
! Component: 100  -  total flux cleaned = -0.000592984 Jy
! Component: 150  -  total flux cleaned = -0.000769722 Jy
! Component: 200  -  total flux cleaned = -0.0010152 Jy
! Total flux subtracted in 200 components = -0.0010152 Jy
! Clean residual min=-0.005872 max=0.004768 Jy/beam
! Clean residual mean=0.000019 rms=0.001419 Jy/beam
! Combined flux in latest and established models = 0.556699 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 178 components and 0.556699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114020Jy  sigma=1.189378
! Fit after  self-cal, rms=0.114016Jy  sigma=1.189345
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114016Jy  sigma=1.189345
! Fit after  self-cal, rms=0.113663Jy  sigma=1.178500
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.878 mas, bmaj=7.467 mas, bpa=-3.31 degrees
! Estimated noise=0.788465 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00373461 Jy
! Component: 100  -  total flux cleaned = -0.0046582 Jy
! Component: 150  -  total flux cleaned = -0.00508948 Jy
! Component: 200  -  total flux cleaned = -0.00547095 Jy
! Total flux subtracted in 200 components = -0.00547095 Jy
! Clean residual min=-0.005369 max=0.004387 Jy/beam
! Clean residual mean=0.000019 rms=0.001160 Jy/beam
! Combined flux in latest and established models = 0.551228 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 189 components and 0.551228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113444Jy  sigma=1.176444
! Fit after  self-cal, rms=0.113452Jy  sigma=1.176371
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000270929 Jy
! Component: 100  -  total flux cleaned = -0.000401575 Jy
! Component: 150  -  total flux cleaned = -0.000460135 Jy
! Component: 200  -  total flux cleaned = -0.000571027 Jy
! Total flux subtracted in 200 components = -0.000571027 Jy
! Clean residual min=-0.005363 max=0.004352 Jy/beam
! Clean residual mean=0.000018 rms=0.001140 Jy/beam
! Combined flux in latest and established models = 0.550657 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 201 components and 0.550657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113377Jy  sigma=1.175645
! Fit after  self-cal, rms=0.113372Jy  sigma=1.175631
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113372Jy  sigma=1.175631
! Fit after  self-cal, rms=0.113914Jy  sigma=1.174772
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.8 mas, bmaj=21.08 mas, bpa=0.397 degrees
! Estimated noise=1.0651 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00321217 Jy
! Component: 100  -  total flux cleaned = -0.00382778 Jy
! Component: 150  -  total flux cleaned = -0.0039325 Jy
! Component: 200  -  total flux cleaned = -0.00393395 Jy
! Total flux subtracted in 200 components = -0.00393395 Jy
! Clean residual min=-0.004941 max=0.005096 Jy/beam
! Clean residual mean=0.000034 rms=0.001489 Jy/beam
! Combined flux in latest and established models = 0.546723 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 215 components and 0.546723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113820Jy  sigma=1.174661
! Fit after  self-cal, rms=0.113829Jy  sigma=1.174580
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000147103 Jy
! Component: 100  -  total flux cleaned = -0.000146063 Jy
! Component: 150  -  total flux cleaned = -0.000145285 Jy
! Component: 200  -  total flux cleaned = -0.000146392 Jy
! Total flux subtracted in 200 components = -0.000146392 Jy
! Clean residual min=-0.004905 max=0.005167 Jy/beam
! Clean residual mean=0.000033 rms=0.001478 Jy/beam
! Combined flux in latest and established models = 0.546577 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 224 components and 0.546577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113805Jy  sigma=1.174847
! Fit after  self-cal, rms=0.113800Jy  sigma=1.174783
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.875 mas, bmaj=7.461 mas, bpa=-3.182 degrees
! Estimated noise=0.786823 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.875 x 7.461 at -3.182 degrees (North through East)
! Clean map  min=-0.0068923  max=0.28509 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.379 mas, bmaj=6.436 mas, bpa=-2.765 degrees
! Estimated noise=0.980988 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.220881 Jy
! Component: 100  -  total flux cleaned = 0.329375 Jy
! Component: 150  -  total flux cleaned = 0.39344 Jy
! Component: 200  -  total flux cleaned = 0.43491 Jy
! Total flux subtracted in 200 components = 0.43491 Jy
! Clean residual min=-0.010006 max=0.022394 Jy/beam
! Clean residual mean=0.000064 rms=0.003555 Jy/beam
! Combined flux in latest and established models = 0.43491 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.43491 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.875 mas, bmaj=7.461 mas, bpa=-3.182 degrees
! Estimated noise=0.786823 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0413544 Jy
! Component: 100  -  total flux cleaned = 0.0650734 Jy
! Component: 150  -  total flux cleaned = 0.0798916 Jy
! Component: 200  -  total flux cleaned = 0.0894681 Jy
! Total flux subtracted in 200 components = 0.0894681 Jy
! Clean residual min=-0.004750 max=0.005926 Jy/beam
! Clean residual mean=0.000028 rms=0.001365 Jy/beam
! Combined flux in latest and established models = 0.524378 Jy
! Adding 88 model components to the UV plane model.
! The established model now contains 104 components and 0.524378 Jy
! Inverting map 
! Added new window around map position (7.5, 4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00683776 Jy
! Component: 100  -  total flux cleaned = 0.011794 Jy
! Component: 150  -  total flux cleaned = 0.0154946 Jy
! Component: 200  -  total flux cleaned = 0.0182981 Jy
! Total flux subtracted in 200 components = 0.0182981 Jy
! Clean residual min=-0.004423 max=0.003869 Jy/beam
! Clean residual mean=0.000020 rms=0.001030 Jy/beam
! Combined flux in latest and established models = 0.542676 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 146 components and 0.542676 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.8 mas, bmaj=21.08 mas, bpa=0.397 degrees
! Estimated noise=1.0651 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0039416 Jy
! Component: 100  -  total flux cleaned = 0.00612699 Jy
! Component: 150  -  total flux cleaned = 0.00654329 Jy
! Component: 200  -  total flux cleaned = 0.00695843 Jy
! Total flux subtracted in 200 components = 0.00695843 Jy
! Clean residual min=-0.004609 max=0.004582 Jy/beam
! Clean residual mean=0.000035 rms=0.001419 Jy/beam
! Combined flux in latest and established models = 0.549635 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206304 Jy
! Component: 100  -  total flux cleaned = 0.00025309 Jy
! Component: 150  -  total flux cleaned = 0.000253284 Jy
! Component: 200  -  total flux cleaned = 0.0002944 Jy
! Total flux subtracted in 200 components = 0.0002944 Jy
! Clean residual min=-0.004622 max=0.004644 Jy/beam
! Clean residual mean=0.000034 rms=0.001406 Jy/beam
! Combined flux in latest and established models = 0.549929 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 179 components and 0.549929 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.875 mas, bmaj=7.461 mas, bpa=-3.182 degrees
! Estimated noise=0.786823 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.55058e-05 Jy
! Component: 100  -  total flux cleaned = -7.00685e-05 Jy
! Component: 150  -  total flux cleaned = -0.000152391 Jy
! Component: 200  -  total flux cleaned = -0.000228093 Jy
! Total flux subtracted in 200 components = -0.000228093 Jy
! Clean residual min=-0.004424 max=0.003655 Jy/beam
! Clean residual mean=0.000016 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.549701 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 196 components and 0.549701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113571Jy  sigma=1.171658
! Fit after  self-cal, rms=0.113510Jy  sigma=1.171368
wmodel J0416-3403_S_map.mod
! Writing 196 model components to file: J0416-3403_S_map.mod
wobs   J0416-3403_S_uvs.fits
! Writing UV FITS file: J0416-3403_S_uvs.fits
wwins  J0416-3403_S_map.win
! wwins: Wrote 5 windows to J0416-3403_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000156845 Jy
! Component: 100  -  total flux cleaned = 0.000229425 Jy
! Component: 150  -  total flux cleaned = 0.000462157 Jy
! Component: 200  -  total flux cleaned = 0.00063017 Jy
! Component: 250  -  total flux cleaned = 0.000682673 Jy
! Component: 300  -  total flux cleaned = 0.000842223 Jy
! Component: 350  -  total flux cleaned = 0.00115086 Jy
! Component: 400  -  total flux cleaned = 0.00120046 Jy
! Component: 450  -  total flux cleaned = 0.00119961 Jy
! Component: 500  -  total flux cleaned = 0.00119882 Jy
! Component: 550  -  total flux cleaned = 0.00091954 Jy
! Component: 600  -  total flux cleaned = 0.000919628 Jy
! Component: 650  -  total flux cleaned = 0.000874867 Jy
! Component: 700  -  total flux cleaned = 0.000699721 Jy
! Component: 750  -  total flux cleaned = 0.000656525 Jy
! Component: 800  -  total flux cleaned = 0.000487364 Jy
! Component: 850  -  total flux cleaned = 0.000404548 Jy
! Component: 900  -  total flux cleaned = 0.000242271 Jy
! Component: 950  -  total flux cleaned = 0.000162629 Jy
! Component: 1000  -  total flux cleaned = -3.31076e-05 Jy
! Component: 1050  -  total flux cleaned = 5.67984e-06 Jy
! Component: 1100  -  total flux cleaned = -0.000184112 Jy
! Component: 1150  -  total flux cleaned = -0.000296407 Jy
! Component: 1200  -  total flux cleaned = -0.00033216 Jy
! Component: 1250  -  total flux cleaned = -0.000332847 Jy
! Component: 1300  -  total flux cleaned = -0.000440339 Jy
! Component: 1350  -  total flux cleaned = -0.000545518 Jy
! Component: 1400  -  total flux cleaned = -0.000580141 Jy
! Component: 1450  -  total flux cleaned = -0.000716476 Jy
! Component: 1500  -  total flux cleaned = -0.00068278 Jy
! Component: 1550  -  total flux cleaned = -0.000815851 Jy
! Component: 1600  -  total flux cleaned = -0.000782852 Jy
! Component: 1650  -  total flux cleaned = -0.000815149 Jy
! Component: 1700  -  total flux cleaned = -0.000783543 Jy
! Component: 1750  -  total flux cleaned = -0.000814661 Jy
! Component: 1800  -  total flux cleaned = -0.000721397 Jy
! Component: 1850  -  total flux cleaned = -0.000721896 Jy
! Component: 1900  -  total flux cleaned = -0.000692268 Jy
! Component: 1950  -  total flux cleaned = -0.000632651 Jy
! Component: 2000  -  total flux cleaned = -0.000544161 Jy
! Component: 2050  -  total flux cleaned = -0.0005445 Jy
! Component: 2100  -  total flux cleaned = -0.000544509 Jy
! Component: 2150  -  total flux cleaned = -0.000572816 Jy
! Component: 2200  -  total flux cleaned = -0.000515603 Jy
! Component: 2250  -  total flux cleaned = -0.000346943 Jy
! Component: 2300  -  total flux cleaned = -0.000347696 Jy
! Component: 2350  -  total flux cleaned = -0.000375707 Jy
! Component: 2400  -  total flux cleaned = -0.000375331 Jy
! Component: 2450  -  total flux cleaned = -0.000348471 Jy
! Component: 2500  -  total flux cleaned = -0.000294597 Jy
! Component: 2550  -  total flux cleaned = -0.000268099 Jy
! Component: 2600  -  total flux cleaned = -0.000268029 Jy
! Component: 2650  -  total flux cleaned = -0.000319746 Jy
! Component: 2700  -  total flux cleaned = -0.000190946 Jy
! Component: 2750  -  total flux cleaned = -0.000216336 Jy
! Component: 2800  -  total flux cleaned = -6.47796e-05 Jy
! Component: 2850  -  total flux cleaned = -6.49576e-05 Jy
! Component: 2900  -  total flux cleaned = -1.54767e-05 Jy
! Component: 2950  -  total flux cleaned = 8.28531e-05 Jy
! Component: 3000  -  total flux cleaned = 0.00010724 Jy
! Component: 3050  -  total flux cleaned = 0.000228248 Jy
! Component: 3100  -  total flux cleaned = 0.000300305 Jy
! Component: 3150  -  total flux cleaned = 0.000324233 Jy
! Component: 3200  -  total flux cleaned = 0.000418691 Jy
! Component: 3250  -  total flux cleaned = 0.000465523 Jy
! Component: 3300  -  total flux cleaned = 0.000442429 Jy
! Component: 3350  -  total flux cleaned = 0.000580614 Jy
! Component: 3400  -  total flux cleaned = 0.000557716 Jy
! Component: 3450  -  total flux cleaned = 0.000625785 Jy
! Component: 3500  -  total flux cleaned = 0.000760817 Jy
! Component: 3550  -  total flux cleaned = 0.000805363 Jy
! Component: 3600  -  total flux cleaned = 0.000849541 Jy
! Component: 3650  -  total flux cleaned = 0.000981408 Jy
! Component: 3700  -  total flux cleaned = 0.00113416 Jy
! Component: 3750  -  total flux cleaned = 0.00119898 Jy
! Component: 3800  -  total flux cleaned = 0.00130689 Jy
! Component: 3850  -  total flux cleaned = 0.00145645 Jy
! Component: 3900  -  total flux cleaned = 0.00152013 Jy
! Component: 3950  -  total flux cleaned = 0.00164678 Jy
! Component: 4000  -  total flux cleaned = 0.00173056 Jy
! Component: 4050  -  total flux cleaned = 0.00175137 Jy
! Total flux subtracted in 4096 components = 0.00187553 Jy
! Clean residual min=-0.001377 max=0.001227 Jy/beam
! Clean residual mean=0.000011 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.551576 Jy
keep
! Adding 353 model components to the UV plane model.
! The established model now contains 549 components and 0.551577 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0416-3403_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.875 x 7.461 at -3.182 degrees (North through East)
! Clean map  min=-0.0029584  max=0.29209 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0416-3403_S_map.fits
wmodel /vlbi/uf001/uva//J0416-3403_S_map.mod
! Writing 549 model components to file: /vlbi/uf001/uva//J0416-3403_S_map.mod
wobs   /vlbi/uf001/uva//J0416-3403_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0416-3403_S_uvs.fits
wwins  /vlbi/uf001/uva//J0416-3403_S_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J0416-3403_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.292088 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000402121 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.413014 0.413014 0.826027 1.65205 3.30411 6.60822 13.2164 26.4329 52.8657
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.292 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  726.368 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0416-3403_S_dfm.log closed on Sun Jan 13 22:07:29 2019