! Started logfile: /vlbi/uf001/uvm//J0416-1851_X_a_dfm.log on Sun Jan 13 20:44:02 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0416-1851_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0416-1851_X_a_uvm.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! AN table 2: 4 integrations on 36 of 36 possible baselines. ! AN table 3: 5 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.705882 visibilities/baseline/integration-bin. ! Found source: J0416-1851 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 10368 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0416-1851_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 51 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.147768Jy sigma=18.292111 ! Fit after self-cal, rms=0.483596Jy sigma=7.331905 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.639 mas, bmaj=1.699 mas, bpa=1.789 degrees ! Estimated noise=0.658856 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.434249 Jy ! Component: 100 - total flux cleaned = 0.528944 Jy ! Total flux subtracted in 100 components = 0.528944 Jy ! Clean residual min=-0.019535 max=0.033947 Jy/beam ! Clean residual mean=0.000004 rms=0.003530 Jy/beam ! Combined flux in latest and established models = 0.528944 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.528944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.161982Jy sigma=2.225943 ! Fit after self-cal, rms=0.161974Jy sigma=2.225898 ! Inverting map ! Added new window around map position (-1.8, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326574 Jy ! Component: 100 - total flux cleaned = 0.0430066 Jy ! Total flux subtracted in 100 components = 0.0430066 Jy ! Clean residual min=-0.016107 max=0.027945 Jy/beam ! Clean residual mean=0.000005 rms=0.003203 Jy/beam ! Combined flux in latest and established models = 0.57195 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 9 components and 0.57195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.157910Jy sigma=2.112756 ! Fit after self-cal, rms=0.157543Jy sigma=2.105070 ! Inverting map ! Added new window around map position (1.8, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203992 Jy ! Component: 100 - total flux cleaned = 0.0313625 Jy ! Total flux subtracted in 100 components = 0.0313625 Jy ! Clean residual min=-0.015481 max=0.017994 Jy/beam ! Clean residual mean=0.000005 rms=0.003050 Jy/beam ! Combined flux in latest and established models = 0.603313 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 29 components and 0.603313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.155267Jy sigma=2.052460 ! Fit after self-cal, rms=0.155180Jy sigma=2.051125 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8156 mas, bmaj=2.025 mas, bpa=2.075 degrees ! Estimated noise=0.491182 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054704 Jy ! Component: 100 - total flux cleaned = 0.00659526 Jy ! Component: 150 - total flux cleaned = 0.00636065 Jy ! Component: 200 - total flux cleaned = 0.00616905 Jy ! Total flux subtracted in 200 components = 0.00616905 Jy ! Clean residual min=-0.018346 max=0.020925 Jy/beam ! Clean residual mean=0.000014 rms=0.004274 Jy/beam ! Combined flux in latest and established models = 0.609482 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 42 components and 0.609482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.154074Jy sigma=2.036966 ! Fit after self-cal, rms=0.154045Jy sigma=2.036673 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8156 x 2.025 at 2.075 degrees (North through East) ! Clean map min=-0.017194 max=0.54285 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.96 HN 1.02 KP 0.97 ! LA 1.08 MK 0.99 NL 1.12 OV 0.94 ! PT 1.17 SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.93 HN 0.96 KP 0.95 ! LA 0.94 MK 1.01 NL 1.04 OV 0.91 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.98 HN 0.92 KP 0.92 ! LA 0.94 NL 0.90 OV 0.85 PT 0.78 ! SC 0.91 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.95 HN 1.02 KP 1.00 ! LA 1.05 MK 1.01 NL 1.15 OV 0.92 ! PT 1.12 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.97 HN 0.98 KP 1.02 ! LA 0.94 MK 1.06 NL 1.00 OV 0.91 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.96 HN 0.92 KP 0.92 ! LA 0.91 NL 0.90 OV 0.87 PT 0.82 ! SC 0.90 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.97 HN 1.04 KP 0.97 ! LA 1.05 MK 1.00 NL 1.11 OV 0.93 ! PT 1.13 SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 0.95 HN 0.97 KP 0.95 ! LA 0.92 MK 1.01 NL 1.04 OV 0.90 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 0.94 HN 0.94 KP 0.93 ! LA 0.93 NL 0.89 OV 0.83 PT 0.77 ! SC 0.91 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.95 HN 1.03 KP 0.99 ! LA 1.05 MK 1.01 NL 1.14 OV 0.93 ! PT 1.10 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 0.94 HN 0.94 KP 1.00 ! LA 0.91 MK 1.04 NL 1.03 OV 0.92 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 0.96 HN 0.92 KP 0.91 ! LA 0.92 NL 0.92 OV 0.85 PT 0.82 ! SC 0.88 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.96 HN 1.05 KP 0.99 ! LA 1.07 MK 0.99 NL 1.12 OV 0.92 ! PT 1.13 SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 0.93 HN 0.96 KP 0.96 ! LA 0.94 MK 1.03 NL 1.05 OV 0.90 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 0.96 HN 0.93 KP 0.93 ! LA 0.91 NL 0.91 OV 0.85 PT 0.83 ! SC 0.89 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.95 HN 1.04 KP 0.99 ! LA 1.05 MK 0.99 NL 1.13 OV 0.93 ! PT 1.13 SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.92 HN 1.00 KP 0.98 ! LA 0.92 MK 1.04 NL 1.01 OV 0.92 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.96 HN 0.92 KP 0.94 ! LA 0.91 NL 0.90 OV 0.84 PT 0.81 ! SC 0.93 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.98 HN 1.03 KP 0.99 ! LA 1.06 MK 1.00 NL 1.15 OV 0.94 ! PT 1.13 SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.93 HN 0.99 KP 0.95 ! LA 0.93 MK 1.03 NL 1.01 OV 0.91 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.95 HN 0.91 KP 0.93 ! LA 0.93 NL 0.91 OV 0.85 PT 0.80 ! SC 0.90 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.96 HN 1.07 KP 1.00 ! LA 1.06 MK 1.00 NL 1.13 OV 0.92 ! PT 1.16 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 0.95 HN 0.99 KP 0.96 ! LA 0.94 MK 0.99 NL 1.05 OV 0.91 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 0.96 HN 0.95 KP 0.94 ! LA 0.93 NL 0.90 OV 0.85 PT 0.82 ! SC 0.90 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.96 HN 1.05 KP 0.97 ! LA 1.06 MK 0.99 NL 1.14 OV 0.92 ! PT 1.12 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.94 HN 0.97 KP 0.98 ! LA 0.91 MK 1.02 NL 1.05 OV 0.89 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 0.97 HN 0.93 KP 0.93 ! LA 0.93 NL 0.88 OV 0.86 PT 0.81 ! SC 0.88 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.96 HN 1.06 KP 0.99 ! LA 1.05 MK 1.02 NL 1.14 OV 0.92 ! PT 1.11 SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 0.96 HN 1.02 KP 0.97 ! LA 0.92 MK 1.04 NL 0.99 OV 0.88 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 0.97 HN 0.92 KP 0.90 ! LA 0.93 NL 0.88 OV 0.85 PT 0.80 ! SC 0.88 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.96 HN 1.02 KP 0.99 ! LA 1.06 MK 0.97 NL 1.17 OV 0.93 ! PT 1.13 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.97 HN 0.98 KP 0.96 ! LA 0.93 MK 0.97 NL 1.05 OV 0.90 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.95 HN 0.92 KP 0.90 ! LA 0.91 NL 0.89 OV 0.85 PT 0.81 ! SC 0.94 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.96 HN 1.06 KP 0.98 ! LA 1.05 MK 0.99 NL 1.14 OV 0.92 ! PT 1.13 SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.91 HN 1.01 KP 0.97 ! LA 0.89 MK 1.04 NL 1.04 OV 0.91 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.01 HN 0.96 KP 0.91 ! LA 0.93 NL 0.90 OV 0.86 PT 0.80 ! SC 0.89 ! ! ! Fit before self-cal, rms=0.154045Jy sigma=2.036673 ! Fit after self-cal, rms=0.142732Jy sigma=1.691974 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8171 mas, bmaj=2.052 mas, bpa=2.446 degrees ! Estimated noise=0.49123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.4, 13.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124378 Jy ! Component: 100 - total flux cleaned = 0.0151814 Jy ! Component: 150 - total flux cleaned = 0.0148817 Jy ! Component: 200 - total flux cleaned = 0.0137737 Jy ! Total flux subtracted in 200 components = 0.0137737 Jy ! Clean residual min=-0.014088 max=0.016768 Jy/beam ! Clean residual mean=0.000025 rms=0.003201 Jy/beam ! Combined flux in latest and established models = 0.623256 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 61 components and 0.623256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.138672Jy sigma=1.658999 ! Fit after self-cal, rms=0.138611Jy sigma=1.654914 ! Inverting map ! Added new window around map position (12.6, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153276 Jy ! Component: 100 - total flux cleaned = 0.021168 Jy ! Component: 150 - total flux cleaned = 0.0233728 Jy ! Component: 200 - total flux cleaned = 0.0250122 Jy ! Total flux subtracted in 200 components = 0.0250122 Jy ! Clean residual min=-0.013292 max=0.015640 Jy/beam ! Clean residual mean=0.000034 rms=0.003058 Jy/beam ! Combined flux in latest and established models = 0.648268 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 78 components and 0.648268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.135546Jy sigma=1.631265 ! Fit after self-cal, rms=0.135388Jy sigma=1.627705 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.135388Jy sigma=1.627705 ! Fit after self-cal, rms=0.163395Jy sigma=1.120960 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8147 mas, bmaj=2.048 mas, bpa=2.328 degrees ! Estimated noise=0.497237 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00834323 Jy ! Component: 100 - total flux cleaned = -0.0115868 Jy ! Component: 150 - total flux cleaned = -0.0142997 Jy ! Component: 200 - total flux cleaned = -0.0169666 Jy ! Total flux subtracted in 200 components = -0.0169666 Jy ! Clean residual min=-0.004764 max=0.004387 Jy/beam ! Clean residual mean=-0.000006 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.631301 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 110 components and 0.631301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.162917Jy sigma=1.094985 ! Fit after self-cal, rms=0.163564Jy sigma=1.093080 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00291349 Jy ! Component: 100 - total flux cleaned = -0.00506202 Jy ! Component: 150 - total flux cleaned = -0.00684328 Jy ! Component: 200 - total flux cleaned = -0.00809715 Jy ! Total flux subtracted in 200 components = -0.00809715 Jy ! Clean residual min=-0.004560 max=0.003961 Jy/beam ! Clean residual mean=-0.000007 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.623204 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 127 components and 0.623204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.163436Jy sigma=1.084520 ! Fit after self-cal, rms=0.163411Jy sigma=1.084274 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.163411Jy sigma=1.084274 ! Fit after self-cal, rms=0.176425Jy sigma=1.056350 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8146 mas, bmaj=2.049 mas, bpa=2.353 degrees ! Estimated noise=0.497001 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00556361 Jy ! Component: 100 - total flux cleaned = -0.00969755 Jy ! Component: 150 - total flux cleaned = -0.0122866 Jy ! Component: 200 - total flux cleaned = -0.0140428 Jy ! Total flux subtracted in 200 components = -0.0140428 Jy ! Clean residual min=-0.003511 max=0.003534 Jy/beam ! Clean residual mean=-0.000006 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.609161 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 137 components and 0.609161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.176192Jy sigma=1.044848 ! Fit after self-cal, rms=0.176175Jy sigma=1.044456 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00196172 Jy ! Component: 100 - total flux cleaned = -0.00332323 Jy ! Component: 150 - total flux cleaned = -0.00436211 Jy ! Component: 200 - total flux cleaned = -0.00514461 Jy ! Total flux subtracted in 200 components = -0.00514461 Jy ! Clean residual min=-0.003285 max=0.003261 Jy/beam ! Clean residual mean=-0.000007 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.604017 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 148 components and 0.604017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.176104Jy sigma=1.040585 ! Fit after self-cal, rms=0.176086Jy sigma=1.040474 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.176086Jy sigma=1.040474 ! Fit after self-cal, rms=0.177754Jy sigma=1.037636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.081 mas, bmaj=4.163 mas, bpa=5.047 degrees ! Estimated noise=0.669331 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00414987 Jy ! Component: 100 - total flux cleaned = -0.0070563 Jy ! Component: 150 - total flux cleaned = -0.00925867 Jy ! Component: 200 - total flux cleaned = -0.0109585 Jy ! Total flux subtracted in 200 components = -0.0109585 Jy ! Clean residual min=-0.005044 max=0.003943 Jy/beam ! Clean residual mean=-0.000015 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.593058 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 173 components and 0.593059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177695Jy sigma=1.034483 ! Fit after self-cal, rms=0.177670Jy sigma=1.034274 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00155532 Jy ! Component: 100 - total flux cleaned = -0.00242111 Jy ! Component: 150 - total flux cleaned = -0.00286608 Jy ! Component: 200 - total flux cleaned = -0.00318553 Jy ! Total flux subtracted in 200 components = -0.00318553 Jy ! Clean residual min=-0.005001 max=0.003860 Jy/beam ! Clean residual mean=-0.000016 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.589873 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 177 components and 0.589873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177657Jy sigma=1.033581 ! Fit after self-cal, rms=0.177650Jy sigma=1.033554 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8141 mas, bmaj=2.05 mas, bpa=2.386 degrees ! Estimated noise=0.496689 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8141 x 2.05 at 2.386 degrees (North through East) ! Clean map min=-0.0033632 max=0.54924 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177650Jy sigma=1.033554 ! Fit after self-cal, rms=0.225552Jy sigma=0.964227 ! Inverting map and beam ! Estimated beam: bmin=0.814 mas, bmaj=2.051 mas, bpa=2.413 degrees ! Estimated noise=0.496324 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00308257 Jy ! Component: 100 - total flux cleaned = -0.00373976 Jy ! Component: 150 - total flux cleaned = -0.00408724 Jy ! Component: 200 - total flux cleaned = -0.00440352 Jy ! Total flux subtracted in 200 components = -0.00440352 Jy ! Clean residual min=-0.002526 max=0.002873 Jy/beam ! Clean residual mean=-0.000006 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.585469 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 183 components and 0.58547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.225521Jy sigma=0.960402 ! Fit after self-cal, rms=0.225518Jy sigma=0.960356 ! Inverting map ! Added new window around map position (1.4, 11.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259625 Jy ! Component: 100 - total flux cleaned = 0.00366471 Jy ! Component: 150 - total flux cleaned = 0.0038396 Jy ! Component: 200 - total flux cleaned = 0.00394712 Jy ! Total flux subtracted in 200 components = 0.00394712 Jy ! Clean residual min=-0.002349 max=0.002632 Jy/beam ! Clean residual mean=-0.000005 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.589417 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 197 components and 0.589417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.225485Jy sigma=0.958064 ! Fit after self-cal, rms=0.225476Jy sigma=0.957985 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.225476Jy sigma=0.957985 ! Fit after self-cal, rms=0.229007Jy sigma=0.957102 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6357 mas, bmaj=1.714 mas, bpa=2.07 degrees ! Estimated noise=0.663447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.43369 Jy ! Component: 100 - total flux cleaned = 0.528262 Jy ! Component: 150 - total flux cleaned = 0.552434 Jy ! Component: 200 - total flux cleaned = 0.56401 Jy ! Total flux subtracted in 200 components = 0.56401 Jy ! Clean residual min=-0.006295 max=0.006407 Jy/beam ! Clean residual mean=-0.000003 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.56401 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.56401 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8137 mas, bmaj=2.051 mas, bpa=2.418 degrees ! Estimated noise=0.496085 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00519009 Jy ! Component: 100 - total flux cleaned = 0.00698382 Jy ! Component: 150 - total flux cleaned = 0.00848129 Jy ! Component: 200 - total flux cleaned = 0.00991897 Jy ! Total flux subtracted in 200 components = 0.00991897 Jy ! Clean residual min=-0.002983 max=0.003027 Jy/beam ! Clean residual mean=-0.000007 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.573929 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 0.573929 Jy ! Inverting map ! Added new window around map position (0, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025116 Jy ! Component: 100 - total flux cleaned = 0.0040427 Jy ! Component: 150 - total flux cleaned = 0.00553012 Jy ! Component: 200 - total flux cleaned = 0.00656508 Jy ! Total flux subtracted in 200 components = 0.00656508 Jy ! Clean residual min=-0.002479 max=0.002607 Jy/beam ! Clean residual mean=-0.000005 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.580494 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 35 components and 0.580494 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.086 mas, bmaj=4.168 mas, bpa=5.111 degrees ! Estimated noise=0.668047 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297611 Jy ! Component: 100 - total flux cleaned = 0.00484472 Jy ! Component: 150 - total flux cleaned = 0.00603361 Jy ! Component: 200 - total flux cleaned = 0.0070639 Jy ! Total flux subtracted in 200 components = 0.0070639 Jy ! Clean residual min=-0.003076 max=0.003153 Jy/beam ! Clean residual mean=-0.000008 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.587558 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00086224 Jy ! Component: 100 - total flux cleaned = 0.00169359 Jy ! Component: 150 - total flux cleaned = 0.00239863 Jy ! Component: 200 - total flux cleaned = 0.00307792 Jy ! Total flux subtracted in 200 components = 0.00307792 Jy ! Clean residual min=-0.003059 max=0.003128 Jy/beam ! Clean residual mean=-0.000007 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.590636 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 62 components and 0.590636 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8137 mas, bmaj=2.051 mas, bpa=2.418 degrees ! Estimated noise=0.496085 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000326875 Jy ! Component: 100 - total flux cleaned = -1.9291e-05 Jy ! Component: 150 - total flux cleaned = 0.000330434 Jy ! Component: 200 - total flux cleaned = 0.000526901 Jy ! Total flux subtracted in 200 components = 0.000526901 Jy ! Clean residual min=-0.002329 max=0.002482 Jy/beam ! Clean residual mean=-0.000003 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.591163 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 0.591162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.229102Jy sigma=0.956434 ! Fit after self-cal, rms=0.229060Jy sigma=0.955366 wmodel J0416-1851_X_a_map.mod ! Writing 73 model components to file: J0416-1851_X_a_map.mod wobs J0416-1851_X_a_uvs.fits ! Writing UV FITS file: J0416-1851_X_a_uvs.fits wwins J0416-1851_X_a_map.win ! wwins: Wrote 7 windows to J0416-1851_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000700733 Jy ! Component: 100 - total flux cleaned = 0.0012909 Jy ! Component: 150 - total flux cleaned = 0.00149173 Jy ! Component: 200 - total flux cleaned = 0.0017631 Jy ! Component: 250 - total flux cleaned = 0.001725 Jy ! Component: 300 - total flux cleaned = 0.00168845 Jy ! Component: 350 - total flux cleaned = 0.00176071 Jy ! Component: 400 - total flux cleaned = 0.00179644 Jy ! Component: 450 - total flux cleaned = 0.00179634 Jy ! Component: 500 - total flux cleaned = 0.00196961 Jy ! Component: 550 - total flux cleaned = 0.00207164 Jy ! Component: 600 - total flux cleaned = 0.00213917 Jy ! Component: 650 - total flux cleaned = 0.0022065 Jy ! Component: 700 - total flux cleaned = 0.00237273 Jy ! Component: 750 - total flux cleaned = 0.00260229 Jy ! Component: 800 - total flux cleaned = 0.00260176 Jy ! Component: 850 - total flux cleaned = 0.00269848 Jy ! Component: 900 - total flux cleaned = 0.00279428 Jy ! Component: 950 - total flux cleaned = 0.00288964 Jy ! Component: 1000 - total flux cleaned = 0.00285844 Jy ! Component: 1050 - total flux cleaned = 0.00313893 Jy ! Component: 1100 - total flux cleaned = 0.00313862 Jy ! Component: 1150 - total flux cleaned = 0.00332274 Jy ! Component: 1200 - total flux cleaned = 0.00332266 Jy ! Component: 1250 - total flux cleaned = 0.00350368 Jy ! Component: 1300 - total flux cleaned = 0.00341333 Jy ! Component: 1350 - total flux cleaned = 0.00365207 Jy ! Component: 1400 - total flux cleaned = 0.00377068 Jy ! Component: 1450 - total flux cleaned = 0.00374119 Jy ! Component: 1500 - total flux cleaned = 0.00382882 Jy ! Component: 1550 - total flux cleaned = 0.00394505 Jy ! Component: 1600 - total flux cleaned = 0.00406054 Jy ! Component: 1650 - total flux cleaned = 0.00417515 Jy ! Component: 1700 - total flux cleaned = 0.00417511 Jy ! Component: 1750 - total flux cleaned = 0.00445836 Jy ! Component: 1800 - total flux cleaned = 0.00431762 Jy ! Component: 1850 - total flux cleaned = 0.00442958 Jy ! Component: 1900 - total flux cleaned = 0.00456867 Jy ! Component: 1950 - total flux cleaned = 0.0045964 Jy ! Component: 2000 - total flux cleaned = 0.00456922 Jy ! Component: 2050 - total flux cleaned = 0.00467863 Jy ! Component: 2100 - total flux cleaned = 0.00473309 Jy ! Component: 2150 - total flux cleaned = 0.00473307 Jy ! Component: 2200 - total flux cleaned = 0.00481395 Jy ! Component: 2250 - total flux cleaned = 0.00486763 Jy ! Component: 2300 - total flux cleaned = 0.00481429 Jy ! Component: 2350 - total flux cleaned = 0.00492036 Jy ! Component: 2400 - total flux cleaned = 0.00499941 Jy ! Component: 2450 - total flux cleaned = 0.00502554 Jy ! Component: 2500 - total flux cleaned = 0.00497325 Jy ! Component: 2550 - total flux cleaned = 0.00499948 Jy ! Component: 2600 - total flux cleaned = 0.00499969 Jy ! Component: 2650 - total flux cleaned = 0.00515408 Jy ! Component: 2700 - total flux cleaned = 0.00528221 Jy ! Component: 2750 - total flux cleaned = 0.00523132 Jy ! Component: 2800 - total flux cleaned = 0.00530751 Jy ! Component: 2850 - total flux cleaned = 0.00530749 Jy ! Component: 2900 - total flux cleaned = 0.00540811 Jy ! Component: 2950 - total flux cleaned = 0.00545817 Jy ! Component: 3000 - total flux cleaned = 0.00545823 Jy ! Component: 3050 - total flux cleaned = 0.00548308 Jy ! Component: 3100 - total flux cleaned = 0.00548315 Jy ! Component: 3150 - total flux cleaned = 0.00553248 Jy ! Component: 3200 - total flux cleaned = 0.00555682 Jy ! Component: 3250 - total flux cleaned = 0.00563005 Jy ! Component: 3300 - total flux cleaned = 0.00560594 Jy ! Component: 3350 - total flux cleaned = 0.00565422 Jy ! Component: 3400 - total flux cleaned = 0.00560618 Jy ! Component: 3450 - total flux cleaned = 0.00567823 Jy ! Component: 3500 - total flux cleaned = 0.00574981 Jy ! Component: 3550 - total flux cleaned = 0.00565457 Jy ! Component: 3600 - total flux cleaned = 0.00563098 Jy ! Component: 3650 - total flux cleaned = 0.00565476 Jy ! Component: 3700 - total flux cleaned = 0.00558425 Jy ! Component: 3750 - total flux cleaned = 0.00574819 Jy ! Component: 3800 - total flux cleaned = 0.00572475 Jy ! Component: 3850 - total flux cleaned = 0.00565509 Jy ! Component: 3900 - total flux cleaned = 0.00570122 Jy ! Component: 3950 - total flux cleaned = 0.00586259 Jy ! Component: 4000 - total flux cleaned = 0.00579382 Jy ! Component: 4050 - total flux cleaned = 0.00574799 Jy ! Total flux subtracted in 4096 components = 0.00574799 Jy ! Clean residual min=-0.001335 max=0.001610 Jy/beam ! Clean residual mean=-0.000002 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.59691 Jy keep ! Adding 357 model components to the UV plane model. ! The established model now contains 430 components and 0.59691 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0416-1851_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8137 x 2.051 at 2.418 degrees (North through East) ! Clean map min=-0.001813 max=0.55118 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0416-1851_X_a_map.fits wmodel /vlbi/uf001/uvm//J0416-1851_X_a_map.mod ! Writing 430 model components to file: /vlbi/uf001/uvm//J0416-1851_X_a_map.mod wobs /vlbi/uf001/uvm//J0416-1851_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0416-1851_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0416-1851_X_a_map.win ! wwins: Wrote 8 windows to /vlbi/uf001/uvm//J0416-1851_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.551181 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000409664 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.222974 0.222974 0.445948 0.891896 1.78379 3.56759 7.13517 14.2703 28.5407 57.0814 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.551 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1345.45 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0416-1851_X_a_dfm.log closed on Sun Jan 13 20:44:07 2019