! Started logfile: /vlbi/uf001/uva//J0415+4452_X_dfm.log on Sun Jan 13 22:06:53 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0415+4452_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0415+4452_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.843827 visibilities/baseline/integration-bin. ! Found source: J0415+4452 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 32808 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0415+4452_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.119590Jy sigma=21.587029 ! Fit after self-cal, rms=0.520838Jy sigma=10.308229 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7323 mas, bmaj=1.07 mas, bpa=6.335 degrees ! Estimated noise=0.432469 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.343992 Jy ! Component: 100 - total flux cleaned = 0.452967 Jy ! Total flux subtracted in 100 components = 0.452967 Jy ! Clean residual min=-0.019382 max=0.051064 Jy/beam ! Clean residual mean=-0.000023 rms=0.004574 Jy/beam ! Combined flux in latest and established models = 0.452968 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.452968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.145967Jy sigma=2.715026 ! Fit after self-cal, rms=0.145145Jy sigma=2.699499 ! Inverting map ! Added new window around map position (0.8, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0601425 Jy ! Component: 100 - total flux cleaned = 0.09504 Jy ! Total flux subtracted in 100 components = 0.09504 Jy ! Clean residual min=-0.018211 max=0.018218 Jy/beam ! Clean residual mean=-0.000016 rms=0.003052 Jy/beam ! Combined flux in latest and established models = 0.548008 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.548008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101244Jy sigma=1.882508 ! Fit after self-cal, rms=0.100592Jy sigma=1.869945 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227461 Jy ! Component: 100 - total flux cleaned = 0.0360174 Jy ! Total flux subtracted in 100 components = 0.0360174 Jy ! Clean residual min=-0.016461 max=0.016801 Jy/beam ! Clean residual mean=-0.000013 rms=0.002752 Jy/beam ! Combined flux in latest and established models = 0.584025 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.584025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091530Jy sigma=1.702613 ! Fit after self-cal, rms=0.091331Jy sigma=1.698961 ! Inverting map ! Added new window around map position (0.6, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147344 Jy ! Component: 100 - total flux cleaned = 0.0175558 Jy ! Total flux subtracted in 100 components = 0.0175558 Jy ! Clean residual min=-0.015953 max=0.014922 Jy/beam ! Clean residual mean=-0.000013 rms=0.002579 Jy/beam ! Combined flux in latest and established models = 0.601581 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.601581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088196Jy sigma=1.635650 ! Fit after self-cal, rms=0.088037Jy sigma=1.632453 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9406 mas, bmaj=1.333 mas, bpa=6.117 degrees ! Estimated noise=0.204489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145654 Jy ! Component: 100 - total flux cleaned = 0.0238034 Jy ! Component: 150 - total flux cleaned = 0.0286731 Jy ! Component: 200 - total flux cleaned = 0.0300796 Jy ! Total flux subtracted in 200 components = 0.0300796 Jy ! Clean residual min=-0.012568 max=0.015880 Jy/beam ! Clean residual mean=-0.000045 rms=0.002909 Jy/beam ! Combined flux in latest and established models = 0.631661 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 0.631661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084960Jy sigma=1.581159 ! Fit after self-cal, rms=0.084898Jy sigma=1.579512 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9406 x 1.333 at 6.117 degrees (North through East) ! Clean map min=-0.011934 max=0.47816 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.95 HN 0.92 KP 1.06 ! LA 1.00 MK 1.02 NL 1.13 OV 0.90 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.93 HN 0.93 KP 1.05 ! LA 1.01 MK 1.01 NL 1.13 OV 0.91 ! PT 0.95 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.94 HN 0.93 KP 1.06 ! LA 1.01 MK 1.01 NL 1.13 OV 0.91 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.95 HN 0.92 KP 1.06 ! LA 1.00 MK 1.00 NL 1.13 OV 0.90 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 0.92 KP 1.06 ! LA 1.01 MK 1.01 NL 1.13 OV 0.90 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 0.92 KP 1.06 ! LA 1.01 MK 0.99 NL 1.12 OV 0.90 ! PT 0.94 SC 1.07 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.94 HN 0.92 KP 1.06 ! LA 1.00 MK 1.00 NL 1.13 OV 0.90 ! PT 0.95 SC 1.06 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.94 HN 0.91 KP 1.05 ! LA 1.00 MK 0.99 NL 1.13 OV 0.90 ! PT 0.94 SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 0.92 KP 1.05 ! LA 1.01 MK 1.00 NL 1.13 OV 0.90 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.94 HN 0.91 KP 1.05 ! LA 1.00 MK 0.98 NL 1.13 OV 0.90 ! PT 0.94 SC 1.05 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 0.92 KP 1.04 ! LA 1.00 MK 1.00 NL 1.12 OV 0.90 ! PT 0.93 SC 1.06 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.94 HN 0.91 KP 1.04 ! LA 1.00 MK 0.98 NL 1.12 OV 0.89 ! PT 0.94 SC 1.06 ! ! ! Fit before self-cal, rms=0.084898Jy sigma=1.579512 ! Fit after self-cal, rms=0.070919Jy sigma=1.271308 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9448 mas, bmaj=1.338 mas, bpa=4.93 degrees ! Estimated noise=0.204209 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00893383 Jy ! Component: 100 - total flux cleaned = -0.0115381 Jy ! Component: 150 - total flux cleaned = -0.0122577 Jy ! Component: 200 - total flux cleaned = -0.0131389 Jy ! Total flux subtracted in 200 components = -0.0131389 Jy ! Clean residual min=-0.008584 max=0.007784 Jy/beam ! Clean residual mean=-0.000031 rms=0.001538 Jy/beam ! Combined flux in latest and established models = 0.618522 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.618522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069668Jy sigma=1.247601 ! Fit after self-cal, rms=0.069614Jy sigma=1.245554 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069614Jy sigma=1.245554 ! Fit after self-cal, rms=0.062177Jy sigma=1.100924 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9419 mas, bmaj=1.353 mas, bpa=3.706 degrees ! Estimated noise=0.204551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00340239 Jy ! Component: 100 - total flux cleaned = -0.00438436 Jy ! Component: 150 - total flux cleaned = -0.00529537 Jy ! Component: 200 - total flux cleaned = -0.00605996 Jy ! Total flux subtracted in 200 components = -0.00605996 Jy ! Clean residual min=-0.003459 max=0.003479 Jy/beam ! Clean residual mean=-0.000004 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.612462 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.612462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061407Jy sigma=1.085034 ! Fit after self-cal, rms=0.061365Jy sigma=1.084017 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.4, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144587 Jy ! Component: 100 - total flux cleaned = 0.00134098 Jy ! Component: 150 - total flux cleaned = 0.000942189 Jy ! Component: 200 - total flux cleaned = 0.000667596 Jy ! Total flux subtracted in 200 components = 0.000667596 Jy ! Clean residual min=-0.002999 max=0.003000 Jy/beam ! Clean residual mean=-0.000004 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.613129 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.613129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060982Jy sigma=1.076811 ! Fit after self-cal, rms=0.060974Jy sigma=1.076610 ! Inverting map ! Added new window around map position (4.2, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549398 Jy ! Component: 100 - total flux cleaned = 0.0005559 Jy ! Component: 150 - total flux cleaned = 0.000233971 Jy ! Component: 200 - total flux cleaned = 8.7864e-05 Jy ! Total flux subtracted in 200 components = 8.7864e-05 Jy ! Clean residual min=-0.002710 max=0.002519 Jy/beam ! Clean residual mean=-0.000005 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.613217 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 75 components and 0.613217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060720Jy sigma=1.071681 ! Fit after self-cal, rms=0.060715Jy sigma=1.071575 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060715Jy sigma=1.071575 ! Fit after self-cal, rms=0.060793Jy sigma=1.068314 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9416 mas, bmaj=1.356 mas, bpa=3.392 degrees ! Estimated noise=0.204627 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106659 Jy ! Component: 100 - total flux cleaned = -0.0011512 Jy ! Component: 150 - total flux cleaned = -0.00123098 Jy ! Component: 200 - total flux cleaned = -0.00123122 Jy ! Total flux subtracted in 200 components = -0.00123122 Jy ! Clean residual min=-0.002376 max=0.002168 Jy/beam ! Clean residual mean=-0.000003 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.611986 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.611986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060589Jy sigma=1.064093 ! Fit after self-cal, rms=0.060585Jy sigma=1.063982 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000282779 Jy ! Component: 100 - total flux cleaned = -0.000341596 Jy ! Component: 150 - total flux cleaned = -0.000506629 Jy ! Component: 200 - total flux cleaned = -0.000608832 Jy ! Total flux subtracted in 200 components = -0.000608832 Jy ! Clean residual min=-0.002220 max=0.002160 Jy/beam ! Clean residual mean=-0.000003 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.611377 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 87 components and 0.611377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060490Jy sigma=1.062043 ! Fit after self-cal, rms=0.060488Jy sigma=1.062010 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060488Jy sigma=1.062010 ! Fit after self-cal, rms=0.060531Jy sigma=1.061357 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.151 mas, bmaj=2.415 mas, bpa=9.968 degrees ! Estimated noise=0.271853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000383513 Jy ! Component: 100 - total flux cleaned = -0.000385474 Jy ! Component: 150 - total flux cleaned = -0.000387086 Jy ! Component: 200 - total flux cleaned = -0.000360739 Jy ! Total flux subtracted in 200 components = -0.000360739 Jy ! Clean residual min=-0.001876 max=0.001924 Jy/beam ! Clean residual mean=-0.000008 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.611016 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 97 components and 0.611016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060505Jy sigma=1.060778 ! Fit after self-cal, rms=0.060501Jy sigma=1.060704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.23815e-06 Jy ! Component: 100 - total flux cleaned = 4.90005e-05 Jy ! Component: 150 - total flux cleaned = 0.000109954 Jy ! Component: 200 - total flux cleaned = 0.000164916 Jy ! Total flux subtracted in 200 components = 0.000164916 Jy ! Clean residual min=-0.001812 max=0.001848 Jy/beam ! Clean residual mean=-0.000008 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.611181 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 103 components and 0.611181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060496Jy sigma=1.060566 ! Fit after self-cal, rms=0.060495Jy sigma=1.060544 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9417 mas, bmaj=1.358 mas, bpa=3.209 degrees ! Estimated noise=0.204565 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9417 x 1.358 at 3.209 degrees (North through East) ! Clean map min=-0.0034085 max=0.47788 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7282 mas, bmaj=1.09 mas, bpa=3.249 degrees ! Estimated noise=0.43975 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.349289 Jy ! Component: 100 - total flux cleaned = 0.463362 Jy ! Component: 150 - total flux cleaned = 0.521871 Jy ! Component: 200 - total flux cleaned = 0.553901 Jy ! Total flux subtracted in 200 components = 0.553901 Jy ! Clean residual min=-0.006978 max=0.015732 Jy/beam ! Clean residual mean=-0.000004 rms=0.001448 Jy/beam ! Combined flux in latest and established models = 0.553901 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.553901 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9417 mas, bmaj=1.358 mas, bpa=3.209 degrees ! Estimated noise=0.204565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252683 Jy ! Component: 100 - total flux cleaned = 0.0376058 Jy ! Component: 150 - total flux cleaned = 0.0447499 Jy ! Component: 200 - total flux cleaned = 0.0495565 Jy ! Total flux subtracted in 200 components = 0.0495565 Jy ! Clean residual min=-0.002531 max=0.003257 Jy/beam ! Clean residual mean=-0.000005 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.603458 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.603458 Jy ! Inverting map ! Added new window around map position (4.6, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244481 Jy ! Component: 100 - total flux cleaned = 0.00341134 Jy ! Component: 150 - total flux cleaned = 0.00416023 Jy ! Component: 200 - total flux cleaned = 0.00464681 Jy ! Total flux subtracted in 200 components = 0.00464681 Jy ! Clean residual min=-0.002188 max=0.002579 Jy/beam ! Clean residual mean=-0.000004 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.608105 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 54 components and 0.608105 Jy ! Inverting map ! Added new window around map position (-4.2, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144667 Jy ! Component: 100 - total flux cleaned = 0.00177874 Jy ! Component: 150 - total flux cleaned = 0.00193332 Jy ! Component: 200 - total flux cleaned = 0.00222368 Jy ! Total flux subtracted in 200 components = 0.00222368 Jy ! Clean residual min=-0.002085 max=0.002354 Jy/beam ! Clean residual mean=-0.000004 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.610328 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 68 components and 0.610328 Jy ! Inverting map ! Added new window around map position (-0.6, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083438 Jy ! Component: 100 - total flux cleaned = 0.000302078 Jy ! Component: 150 - total flux cleaned = 0.0002351 Jy ! Component: 200 - total flux cleaned = 0.000234183 Jy ! Total flux subtracted in 200 components = 0.000234183 Jy ! Clean residual min=-0.002011 max=0.002162 Jy/beam ! Clean residual mean=-0.000004 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.610563 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 82 components and 0.610563 Jy ! Inverting map ! Added new window around map position (-0.4, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000986924 Jy ! Component: 100 - total flux cleaned = 0.000793556 Jy ! Component: 150 - total flux cleaned = 0.000734779 Jy ! Component: 200 - total flux cleaned = 0.000677041 Jy ! Total flux subtracted in 200 components = 0.000677041 Jy ! Clean residual min=-0.001853 max=0.001964 Jy/beam ! Clean residual mean=-0.000004 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.61124 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 97 components and 0.61124 Jy ! Inverting map ! Added new window around map position (22.8, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113768 Jy ! Component: 100 - total flux cleaned = 0.00114101 Jy ! Component: 150 - total flux cleaned = 0.0011413 Jy ! Component: 200 - total flux cleaned = 0.00119263 Jy ! Total flux subtracted in 200 components = 0.00119263 Jy ! Clean residual min=-0.001667 max=0.001742 Jy/beam ! Clean residual mean=-0.000003 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.612432 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 108 components and 0.612432 Jy ! Inverting map ! Added new window around map position (-10.2, -8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103594 Jy ! Component: 100 - total flux cleaned = 0.00122999 Jy ! Component: 150 - total flux cleaned = 0.00113691 Jy ! Component: 200 - total flux cleaned = 0.00113634 Jy ! Total flux subtracted in 200 components = 0.00113634 Jy ! Clean residual min=-0.001575 max=0.001622 Jy/beam ! Clean residual mean=-0.000003 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.613569 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 123 components and 0.613568 Jy ! Inverting map ! Added new window around map position (-5.2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234972 Jy ! Component: 100 - total flux cleaned = 0.000328362 Jy ! Component: 150 - total flux cleaned = 0.000372703 Jy ! Component: 200 - total flux cleaned = 0.000413604 Jy ! Total flux subtracted in 200 components = 0.000413604 Jy ! Clean residual min=-0.001538 max=0.001479 Jy/beam ! Clean residual mean=-0.000003 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.613982 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 138 components and 0.613982 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.151 mas, bmaj=2.415 mas, bpa=9.968 degrees ! Estimated noise=0.271853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000346683 Jy ! Component: 100 - total flux cleaned = -0.000381459 Jy ! Component: 150 - total flux cleaned = -0.000322956 Jy ! Component: 200 - total flux cleaned = -0.000268806 Jy ! Total flux subtracted in 200 components = -0.000268806 Jy ! Clean residual min=-0.001556 max=0.001398 Jy/beam ! Clean residual mean=-0.000008 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.613713 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.02685e-05 Jy ! Component: 100 - total flux cleaned = 5.01272e-05 Jy ! Component: 150 - total flux cleaned = 7.31721e-05 Jy ! Component: 200 - total flux cleaned = 5.06237e-05 Jy ! Total flux subtracted in 200 components = 5.06237e-05 Jy ! Clean residual min=-0.001513 max=0.001327 Jy/beam ! Clean residual mean=-0.000008 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.613764 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 180 components and 0.613764 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9417 mas, bmaj=1.358 mas, bpa=3.209 degrees ! Estimated noise=0.204565 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000180332 Jy ! Component: 100 - total flux cleaned = -0.000257271 Jy ! Component: 150 - total flux cleaned = -0.000330689 Jy ! Component: 200 - total flux cleaned = -0.000296527 Jy ! Total flux subtracted in 200 components = -0.000296527 Jy ! Clean residual min=-0.001559 max=0.001450 Jy/beam ! Clean residual mean=-0.000003 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.613468 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 194 components and 0.613468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060025Jy sigma=1.051638 ! Fit after self-cal, rms=0.059992Jy sigma=1.050963 wmodel J0415+4452_X_map.mod ! Writing 194 model components to file: J0415+4452_X_map.mod wobs J0415+4452_X_uvs.fits ! Writing UV FITS file: J0415+4452_X_uvs.fits wwins J0415+4452_X_map.win ! wwins: Wrote 12 windows to J0415+4452_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000303954 Jy ! Component: 100 - total flux cleaned = -0.000472611 Jy ! Component: 150 - total flux cleaned = -0.000586808 Jy ! Component: 200 - total flux cleaned = -0.000674287 Jy ! Component: 250 - total flux cleaned = -0.000738228 Jy ! Component: 300 - total flux cleaned = -0.000883065 Jy ! Component: 350 - total flux cleaned = -0.000903574 Jy ! Component: 400 - total flux cleaned = -0.000982875 Jy ! Component: 450 - total flux cleaned = -0.00102179 Jy ! Component: 500 - total flux cleaned = -0.0010791 Jy ! Component: 550 - total flux cleaned = -0.00109801 Jy ! Component: 600 - total flux cleaned = -0.0010986 Jy ! Component: 650 - total flux cleaned = -0.00115325 Jy ! Component: 700 - total flux cleaned = -0.00118905 Jy ! Component: 750 - total flux cleaned = -0.00120653 Jy ! Component: 800 - total flux cleaned = -0.00117215 Jy ! Component: 850 - total flux cleaned = -0.0012408 Jy ! Component: 900 - total flux cleaned = -0.0012575 Jy ! Component: 950 - total flux cleaned = -0.00124076 Jy ! Component: 1000 - total flux cleaned = -0.00125712 Jy ! Component: 1050 - total flux cleaned = -0.00127309 Jy ! Component: 1100 - total flux cleaned = -0.00124083 Jy ! Component: 1150 - total flux cleaned = -0.00128865 Jy ! Component: 1200 - total flux cleaned = -0.0012886 Jy ! Component: 1250 - total flux cleaned = -0.00127297 Jy ! Component: 1300 - total flux cleaned = -0.00130394 Jy ! Component: 1350 - total flux cleaned = -0.00133416 Jy ! Component: 1400 - total flux cleaned = -0.00124376 Jy ! Component: 1450 - total flux cleaned = -0.00131883 Jy ! Component: 1500 - total flux cleaned = -0.0013484 Jy ! Component: 1550 - total flux cleaned = -0.00134843 Jy ! Component: 1600 - total flux cleaned = -0.00131934 Jy ! Component: 1650 - total flux cleaned = -0.00136239 Jy ! Component: 1700 - total flux cleaned = -0.00134794 Jy ! Component: 1750 - total flux cleaned = -0.00134823 Jy ! Component: 1800 - total flux cleaned = -0.00134822 Jy ! Component: 1850 - total flux cleaned = -0.00141731 Jy ! Component: 1900 - total flux cleaned = -0.00143083 Jy ! Component: 1950 - total flux cleaned = -0.00145791 Jy ! Component: 2000 - total flux cleaned = -0.00143097 Jy ! Component: 2050 - total flux cleaned = -0.00144444 Jy ! Component: 2100 - total flux cleaned = -0.00149732 Jy ! Component: 2150 - total flux cleaned = -0.00151043 Jy ! Component: 2200 - total flux cleaned = -0.0015234 Jy ! Component: 2250 - total flux cleaned = -0.00152344 Jy ! Component: 2300 - total flux cleaned = -0.00153636 Jy ! Component: 2350 - total flux cleaned = -0.00157453 Jy ! Component: 2400 - total flux cleaned = -0.0016375 Jy ! Component: 2450 - total flux cleaned = -0.00157498 Jy ! Component: 2500 - total flux cleaned = -0.00159979 Jy ! Component: 2550 - total flux cleaned = -0.00161222 Jy ! Component: 2600 - total flux cleaned = -0.00166115 Jy ! Component: 2650 - total flux cleaned = -0.00168542 Jy ! Component: 2700 - total flux cleaned = -0.00166147 Jy ! Component: 2750 - total flux cleaned = -0.00170944 Jy ! Component: 2800 - total flux cleaned = -0.00172108 Jy ! Component: 2850 - total flux cleaned = -0.0017563 Jy ! Component: 2900 - total flux cleaned = -0.0017679 Jy ! Component: 2950 - total flux cleaned = -0.00179114 Jy ! Component: 3000 - total flux cleaned = -0.00180262 Jy ! Component: 3050 - total flux cleaned = -0.00179109 Jy ! Component: 3100 - total flux cleaned = -0.00172296 Jy ! Component: 3150 - total flux cleaned = -0.00180215 Jy ! Component: 3200 - total flux cleaned = -0.00179082 Jy ! Component: 3250 - total flux cleaned = -0.00177971 Jy ! Component: 3300 - total flux cleaned = -0.00174644 Jy ! Component: 3350 - total flux cleaned = -0.00176849 Jy ! Component: 3400 - total flux cleaned = -0.00174663 Jy ! Component: 3450 - total flux cleaned = -0.00179009 Jy ! Component: 3500 - total flux cleaned = -0.00176844 Jy ! Component: 3550 - total flux cleaned = -0.00176848 Jy ! Component: 3600 - total flux cleaned = -0.00173652 Jy ! Component: 3650 - total flux cleaned = -0.00172601 Jy ! Component: 3700 - total flux cleaned = -0.00173654 Jy ! Component: 3750 - total flux cleaned = -0.00171554 Jy ! Component: 3800 - total flux cleaned = -0.00170504 Jy ! Component: 3850 - total flux cleaned = -0.00167392 Jy ! Component: 3900 - total flux cleaned = -0.00167388 Jy ! Component: 3950 - total flux cleaned = -0.00172519 Jy ! Component: 4000 - total flux cleaned = -0.0016742 Jy ! Component: 4050 - total flux cleaned = -0.00169445 Jy ! Total flux subtracted in 4096 components = -0.00166416 Jy ! Clean residual min=-0.000542 max=0.000574 Jy/beam ! Clean residual mean=-0.000001 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.611803 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 518 components and 0.611802 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0415+4452_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9417 x 1.358 at 3.209 degrees (North through East) ! Clean map min=-0.0019761 max=0.47993 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0415+4452_X_map.fits wmodel /vlbi/uf001/uva//J0415+4452_X_map.mod ! Writing 518 model components to file: /vlbi/uf001/uva//J0415+4452_X_map.mod wobs /vlbi/uf001/uva//J0415+4452_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0415+4452_X_uvs.fits wwins /vlbi/uf001/uva//J0415+4452_X_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uva//J0415+4452_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.479933 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000174041 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.108791 0.108791 0.217582 0.435163 0.870327 1.74065 3.48131 6.96261 13.9252 27.8505 55.7009 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.479 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2757.58 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0415+4452_X_dfm.log closed on Sun Jan 13 22:07:00 2019