! Started logfile: /vlbi/uf001/uva//J0414+3418_X_dfm.log on Sun Jan 13 22:06:40 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0414+3418_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0414+3418_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.914815 visibilities/baseline/integration-bin. ! Found source: J0414+3418 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 35568 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0414+3418_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.062968Jy sigma=21.983588 ! Fit after self-cal, rms=0.786439Jy sigma=16.944739 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6485 mas, bmaj=1.258 mas, bpa=-5.044 degrees ! Estimated noise=0.379938 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152722 Jy ! Component: 100 - total flux cleaned = 0.227177 Jy ! Total flux subtracted in 100 components = 0.227177 Jy ! Clean residual min=-0.031822 max=0.074992 Jy/beam ! Clean residual mean=0.000036 rms=0.007607 Jy/beam ! Combined flux in latest and established models = 0.227177 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.227177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.244863Jy sigma=4.471756 ! Fit after self-cal, rms=0.244122Jy sigma=4.461255 ! Inverting map ! Added new window around map position (-1.2, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0719424 Jy ! Component: 100 - total flux cleaned = 0.117384 Jy ! Total flux subtracted in 100 components = 0.117384 Jy ! Clean residual min=-0.027835 max=0.062012 Jy/beam ! Clean residual mean=0.000034 rms=0.006258 Jy/beam ! Combined flux in latest and established models = 0.344561 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.344561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.205969Jy sigma=3.764223 ! Fit after self-cal, rms=0.202820Jy sigma=3.703205 ! Inverting map ! Added new window around map position (0.8, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0588547 Jy ! Component: 100 - total flux cleaned = 0.097121 Jy ! Total flux subtracted in 100 components = 0.097121 Jy ! Clean residual min=-0.019880 max=0.058167 Jy/beam ! Clean residual mean=0.000030 rms=0.005059 Jy/beam ! Combined flux in latest and established models = 0.441682 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.441682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.169080Jy sigma=3.085203 ! Fit after self-cal, rms=0.166869Jy sigma=3.033390 ! Inverting map ! Added new window around map position (-1, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0475782 Jy ! Component: 100 - total flux cleaned = 0.0795359 Jy ! Total flux subtracted in 100 components = 0.0795359 Jy ! Clean residual min=-0.017402 max=0.022049 Jy/beam ! Clean residual mean=0.000026 rms=0.003953 Jy/beam ! Combined flux in latest and established models = 0.521218 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 46 components and 0.521218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.139183Jy sigma=2.526970 ! Fit after self-cal, rms=0.138684Jy sigma=2.516500 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0278616 Jy ! Component: 100 - total flux cleaned = 0.0509724 Jy ! Total flux subtracted in 100 components = 0.0509724 Jy ! Clean residual min=-0.015409 max=0.018927 Jy/beam ! Clean residual mean=0.000022 rms=0.003515 Jy/beam ! Combined flux in latest and established models = 0.57219 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 61 components and 0.57219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124288Jy sigma=2.270110 ! Fit after self-cal, rms=0.124131Jy sigma=2.266730 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8234 mas, bmaj=1.479 mas, bpa=-3.974 degrees ! Estimated noise=0.204678 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.038744 Jy ! Component: 100 - total flux cleaned = 0.0694663 Jy ! Component: 150 - total flux cleaned = 0.094981 Jy ! Component: 200 - total flux cleaned = 0.116503 Jy ! Total flux subtracted in 200 components = 0.116503 Jy ! Clean residual min=-0.014476 max=0.021981 Jy/beam ! Clean residual mean=0.000029 rms=0.004142 Jy/beam ! Combined flux in latest and established models = 0.688693 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 92 components and 0.688693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098117Jy sigma=1.854957 ! Fit after self-cal, rms=0.097981Jy sigma=1.852129 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8234 x 1.479 at -3.974 degrees (North through East) ! Clean map min=-0.013908 max=0.21477 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.94 HN 0.89 KP 0.87 ! LA 0.84 MK 1.05 NL 1.24 OV 0.87 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.93 HN 0.92 KP 0.87 ! LA 0.83 MK 1.05 NL 1.24 OV 0.88 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.94 HN 0.92 KP 0.88 ! LA 0.83 MK 1.07 NL 1.22 OV 0.89 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.95 HN 0.91 KP 0.89 ! LA 0.83 MK 1.06 NL 1.21 OV 0.89 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.97 HN 0.89 KP 0.89 ! LA 0.84 MK 1.07 NL 1.23 OV 0.88 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.95 HN 0.90 KP 0.87 ! LA 0.85 MK 1.07 NL 1.23 OV 0.90 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.95 HN 0.91 KP 0.88 ! LA 0.85 MK 1.10 NL 1.21 OV 0.88 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.95 HN 0.93 KP 0.88 ! LA 0.85 MK 1.11 NL 1.21 OV 0.87 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.97 HN 0.91 KP 0.89 ! LA 0.84 MK 1.10 NL 1.21 OV 0.89 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.97 HN 0.91 KP 0.89 ! LA 0.85 MK 1.08 NL 1.21 OV 0.90 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.97 HN 0.90 KP 0.88 ! LA 0.86 MK 1.09 NL 1.19 OV 0.89 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.97 HN 0.90 KP 0.88 ! LA 0.86 MK 1.05 NL 1.23 OV 0.89 ! PT 1.00* SC 1.00 ! ! ! Fit before self-cal, rms=0.097981Jy sigma=1.852129 ! Fit after self-cal, rms=0.072454Jy sigma=1.449862 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.838 mas, bmaj=1.506 mas, bpa=-3.539 degrees ! Estimated noise=0.196508 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.4, -10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165908 Jy ! Component: 100 - total flux cleaned = 0.0233799 Jy ! Component: 150 - total flux cleaned = 0.0284615 Jy ! Component: 200 - total flux cleaned = 0.0331362 Jy ! Total flux subtracted in 200 components = 0.0331362 Jy ! Clean residual min=-0.009509 max=0.010147 Jy/beam ! Clean residual mean=-0.000004 rms=0.001776 Jy/beam ! Combined flux in latest and established models = 0.721829 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 108 components and 0.72183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067743Jy sigma=1.353714 ! Fit after self-cal, rms=0.067508Jy sigma=1.345007 ! Inverting map ! Added new window around map position (-9.2, -17.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00842045 Jy ! Component: 100 - total flux cleaned = 0.0129771 Jy ! Component: 150 - total flux cleaned = 0.0168097 Jy ! Component: 200 - total flux cleaned = 0.019584 Jy ! Total flux subtracted in 200 components = 0.019584 Jy ! Clean residual min=-0.008134 max=0.009225 Jy/beam ! Clean residual mean=0.000001 rms=0.001564 Jy/beam ! Combined flux in latest and established models = 0.741414 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 127 components and 0.741413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065264Jy sigma=1.306924 ! Fit after self-cal, rms=0.065180Jy sigma=1.304589 ! Inverting map ! Added new window around map position (1.8, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0058126 Jy ! Component: 100 - total flux cleaned = 0.00703066 Jy ! Component: 150 - total flux cleaned = 0.00807728 Jy ! Component: 200 - total flux cleaned = 0.00855018 Jy ! Total flux subtracted in 200 components = 0.00855018 Jy ! Clean residual min=-0.007095 max=0.007007 Jy/beam ! Clean residual mean=0.000000 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.749964 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 146 components and 0.749964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063625Jy sigma=1.275102 ! Fit after self-cal, rms=0.063570Jy sigma=1.273947 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063570Jy sigma=1.273947 ! Fit after self-cal, rms=0.061406Jy sigma=1.174034 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8634 mas, bmaj=1.5 mas, bpa=-3.95 degrees ! Estimated noise=0.201274 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371264 Jy ! Component: 100 - total flux cleaned = 0.00487771 Jy ! Component: 150 - total flux cleaned = 0.00600403 Jy ! Component: 200 - total flux cleaned = 0.00713742 Jy ! Total flux subtracted in 200 components = 0.00713742 Jy ! Clean residual min=-0.003940 max=0.007214 Jy/beam ! Clean residual mean=-0.000002 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.757101 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 166 components and 0.757101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060945Jy sigma=1.163174 ! Fit after self-cal, rms=0.061002Jy sigma=1.162662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00604488 Jy ! Component: 100 - total flux cleaned = 0.00831658 Jy ! Component: 150 - total flux cleaned = 0.00943449 Jy ! Component: 200 - total flux cleaned = 0.00999112 Jy ! Total flux subtracted in 200 components = 0.00999112 Jy ! Clean residual min=-0.003485 max=0.003774 Jy/beam ! Clean residual mean=0.000001 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.767092 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 191 components and 0.767092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060309Jy sigma=1.147238 ! Fit after self-cal, rms=0.060264Jy sigma=1.146566 ! Inverting map ! Added new window around map position (-2.2, 14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293376 Jy ! Component: 100 - total flux cleaned = 0.00329308 Jy ! Component: 150 - total flux cleaned = 0.00328839 Jy ! Component: 200 - total flux cleaned = 0.0036667 Jy ! Total flux subtracted in 200 components = 0.0036667 Jy ! Clean residual min=-0.003112 max=0.002739 Jy/beam ! Clean residual mean=0.000001 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.770759 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 203 components and 0.770759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059977Jy sigma=1.140399 ! Fit after self-cal, rms=0.059963Jy sigma=1.140190 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059963Jy sigma=1.140190 ! Fit after self-cal, rms=0.061293Jy sigma=1.137695 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8678 mas, bmaj=1.501 mas, bpa=-3.77 degrees ! Estimated noise=0.201692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184379 Jy ! Component: 100 - total flux cleaned = 0.00257201 Jy ! Component: 150 - total flux cleaned = 0.00315766 Jy ! Component: 200 - total flux cleaned = 0.00348985 Jy ! Total flux subtracted in 200 components = 0.00348985 Jy ! Clean residual min=-0.002925 max=0.002396 Jy/beam ! Clean residual mean=-0.000001 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.774249 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 216 components and 0.774249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061099Jy sigma=1.133795 ! Fit after self-cal, rms=0.061099Jy sigma=1.133731 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143117 Jy ! Component: 100 - total flux cleaned = 8.36094e-05 Jy ! Component: 150 - total flux cleaned = 8.37759e-05 Jy ! Component: 200 - total flux cleaned = 8.34005e-05 Jy ! Total flux subtracted in 200 components = 8.34005e-05 Jy ! Clean residual min=-0.002817 max=0.002314 Jy/beam ! Clean residual mean=-0.000000 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.774332 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 226 components and 0.774332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060993Jy sigma=1.131488 ! Fit after self-cal, rms=0.060989Jy sigma=1.131470 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060989Jy sigma=1.131470 ! Fit after self-cal, rms=0.061338Jy sigma=1.131147 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.87 mas, bmaj=2.311 mas, bpa=-4.578 degrees ! Estimated noise=0.271531 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000759697 Jy ! Component: 100 - total flux cleaned = 0.00203948 Jy ! Component: 150 - total flux cleaned = 0.00302923 Jy ! Component: 200 - total flux cleaned = 0.00363684 Jy ! Total flux subtracted in 200 components = 0.00363684 Jy ! Clean residual min=-0.003154 max=0.003150 Jy/beam ! Clean residual mean=-0.000002 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.777969 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 242 components and 0.777969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061278Jy sigma=1.130110 ! Fit after self-cal, rms=0.061282Jy sigma=1.130036 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207719 Jy ! Component: 100 - total flux cleaned = 0.000401758 Jy ! Component: 150 - total flux cleaned = 0.00049431 Jy ! Component: 200 - total flux cleaned = 0.000622689 Jy ! Total flux subtracted in 200 components = 0.000622689 Jy ! Clean residual min=-0.003063 max=0.003124 Jy/beam ! Clean residual mean=-0.000002 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.778592 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 250 components and 0.778592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061258Jy sigma=1.129675 ! Fit after self-cal, rms=0.061259Jy sigma=1.129637 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8688 mas, bmaj=1.501 mas, bpa=-3.74 degrees ! Estimated noise=0.201748 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8688 x 1.501 at -3.74 degrees (North through East) ! Clean map min=-0.004012 max=0.21224 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.69 mas, bmaj=1.26 mas, bpa=-5.584 degrees ! Estimated noise=0.390604 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.155852 Jy ! Component: 100 - total flux cleaned = 0.253781 Jy ! Component: 150 - total flux cleaned = 0.326441 Jy ! Component: 200 - total flux cleaned = 0.382437 Jy ! Total flux subtracted in 200 components = 0.382437 Jy ! Clean residual min=-0.020019 max=0.032778 Jy/beam ! Clean residual mean=0.000025 rms=0.004724 Jy/beam ! Combined flux in latest and established models = 0.382437 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.382437 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8688 mas, bmaj=1.501 mas, bpa=-3.74 degrees ! Estimated noise=0.201748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0683597 Jy ! Component: 100 - total flux cleaned = 0.11712 Jy ! Component: 150 - total flux cleaned = 0.154318 Jy ! Component: 200 - total flux cleaned = 0.183968 Jy ! Total flux subtracted in 200 components = 0.183968 Jy ! Clean residual min=-0.011805 max=0.018647 Jy/beam ! Clean residual mean=0.000018 rms=0.003427 Jy/beam ! Combined flux in latest and established models = 0.566405 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 67 components and 0.566405 Jy ! Inverting map ! Added new window around map position (4.2, -12.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248186 Jy ! Component: 100 - total flux cleaned = 0.0458635 Jy ! Component: 150 - total flux cleaned = 0.0639178 Jy ! Component: 200 - total flux cleaned = 0.0795874 Jy ! Total flux subtracted in 200 components = 0.0795874 Jy ! Clean residual min=-0.007685 max=0.010080 Jy/beam ! Clean residual mean=0.000005 rms=0.002076 Jy/beam ! Combined flux in latest and established models = 0.645992 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 88 components and 0.645992 Jy ! Inverting map ! Added new window around map position (-0.4, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137734 Jy ! Component: 100 - total flux cleaned = 0.0258706 Jy ! Component: 150 - total flux cleaned = 0.0365656 Jy ! Component: 200 - total flux cleaned = 0.0460612 Jy ! Total flux subtracted in 200 components = 0.0460612 Jy ! Clean residual min=-0.005614 max=0.006352 Jy/beam ! Clean residual mean=0.000001 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.692054 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 112 components and 0.692054 Jy ! Inverting map ! Added new window around map position (-5.2, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00849261 Jy ! Component: 100 - total flux cleaned = 0.016064 Jy ! Component: 150 - total flux cleaned = 0.0228746 Jy ! Component: 200 - total flux cleaned = 0.0285297 Jy ! Total flux subtracted in 200 components = 0.0285297 Jy ! Clean residual min=-0.004652 max=0.004629 Jy/beam ! Clean residual mean=-0.000001 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.720584 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 134 components and 0.720584 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.87 mas, bmaj=2.311 mas, bpa=-4.578 degrees ! Estimated noise=0.271531 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00960337 Jy ! Component: 100 - total flux cleaned = 0.0169761 Jy ! Component: 150 - total flux cleaned = 0.0231017 Jy ! Component: 200 - total flux cleaned = 0.0274775 Jy ! Total flux subtracted in 200 components = 0.0274775 Jy ! Clean residual min=-0.004478 max=0.004761 Jy/beam ! Clean residual mean=-0.000005 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.748061 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00397664 Jy ! Component: 100 - total flux cleaned = 0.0072865 Jy ! Component: 150 - total flux cleaned = 0.0100777 Jy ! Component: 200 - total flux cleaned = 0.012459 Jy ! Total flux subtracted in 200 components = 0.012459 Jy ! Clean residual min=-0.003553 max=0.003814 Jy/beam ! Clean residual mean=-0.000006 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.76052 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 198 components and 0.76052 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8688 mas, bmaj=1.501 mas, bpa=-3.74 degrees ! Estimated noise=0.201748 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351502 Jy ! Component: 100 - total flux cleaned = 0.00585512 Jy ! Component: 150 - total flux cleaned = 0.00742602 Jy ! Component: 200 - total flux cleaned = 0.0086356 Jy ! Total flux subtracted in 200 components = 0.0086356 Jy ! Clean residual min=-0.003626 max=0.003169 Jy/beam ! Clean residual mean=-0.000003 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.769156 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 219 components and 0.769156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062274Jy sigma=1.145613 ! Fit after self-cal, rms=0.062078Jy sigma=1.143418 wmodel J0414+3418_X_map.mod ! Writing 219 model components to file: J0414+3418_X_map.mod wobs J0414+3418_X_uvs.fits ! Writing UV FITS file: J0414+3418_X_uvs.fits wwins J0414+3418_X_map.win ! wwins: Wrote 12 windows to J0414+3418_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000789892 Jy ! Component: 100 - total flux cleaned = -0.000949876 Jy ! Component: 150 - total flux cleaned = -0.000998243 Jy ! Component: 200 - total flux cleaned = -0.00104628 Jy ! Component: 250 - total flux cleaned = -0.00109206 Jy ! Component: 300 - total flux cleaned = -0.00100289 Jy ! Component: 350 - total flux cleaned = -0.00087313 Jy ! Component: 400 - total flux cleaned = -0.000831611 Jy ! Component: 450 - total flux cleaned = -0.00078968 Jy ! Component: 500 - total flux cleaned = -0.000548397 Jy ! Component: 550 - total flux cleaned = -0.000432015 Jy ! Component: 600 - total flux cleaned = -0.00031705 Jy ! Component: 650 - total flux cleaned = -9.19035e-05 Jy ! Component: 700 - total flux cleaned = 0.000201365 Jy ! Component: 750 - total flux cleaned = 0.00048817 Jy ! Component: 800 - total flux cleaned = 0.000734086 Jy ! Component: 850 - total flux cleaned = 0.000941718 Jy ! Component: 900 - total flux cleaned = 0.0011802 Jy ! Component: 950 - total flux cleaned = 0.00144705 Jy ! Component: 1000 - total flux cleaned = 0.00157782 Jy ! Component: 1050 - total flux cleaned = 0.00157768 Jy ! Component: 1100 - total flux cleaned = 0.00164157 Jy ! Component: 1150 - total flux cleaned = 0.00182898 Jy ! Component: 1200 - total flux cleaned = 0.00195219 Jy ! Component: 1250 - total flux cleaned = 0.00216498 Jy ! Component: 1300 - total flux cleaned = 0.00231461 Jy ! Component: 1350 - total flux cleaned = 0.00249141 Jy ! Component: 1400 - total flux cleaned = 0.00252073 Jy ! Component: 1450 - total flux cleaned = 0.00266436 Jy ! Component: 1500 - total flux cleaned = 0.00289071 Jy ! Component: 1550 - total flux cleaned = 0.00300196 Jy ! Component: 1600 - total flux cleaned = 0.00308419 Jy ! Component: 1650 - total flux cleaned = 0.00319289 Jy ! Component: 1700 - total flux cleaned = 0.00335399 Jy ! Component: 1750 - total flux cleaned = 0.00345987 Jy ! Component: 1800 - total flux cleaned = 0.00359005 Jy ! Component: 1850 - total flux cleaned = 0.00377039 Jy ! Component: 1900 - total flux cleaned = 0.0037703 Jy ! Component: 1950 - total flux cleaned = 0.00379579 Jy ! Component: 2000 - total flux cleaned = 0.00389536 Jy ! Component: 2050 - total flux cleaned = 0.00404246 Jy ! Component: 2100 - total flux cleaned = 0.00406637 Jy ! Component: 2150 - total flux cleaned = 0.0041382 Jy ! Component: 2200 - total flux cleaned = 0.00423266 Jy ! Component: 2250 - total flux cleaned = 0.00418581 Jy ! Component: 2300 - total flux cleaned = 0.0043943 Jy ! Component: 2350 - total flux cleaned = 0.00444022 Jy ! Component: 2400 - total flux cleaned = 0.00441742 Jy ! Component: 2450 - total flux cleaned = 0.00450734 Jy ! Component: 2500 - total flux cleaned = 0.00459636 Jy ! Component: 2550 - total flux cleaned = 0.00466205 Jy ! Component: 2600 - total flux cleaned = 0.00453186 Jy ! Component: 2650 - total flux cleaned = 0.00461797 Jy ! Component: 2700 - total flux cleaned = 0.0045967 Jy ! Component: 2750 - total flux cleaned = 0.00461797 Jy ! Component: 2800 - total flux cleaned = 0.00472182 Jy ! Component: 2850 - total flux cleaned = 0.00482429 Jy ! Component: 2900 - total flux cleaned = 0.00488522 Jy ! Component: 2950 - total flux cleaned = 0.00496553 Jy ! Component: 3000 - total flux cleaned = 0.0049656 Jy ! Component: 3050 - total flux cleaned = 0.00494541 Jy ! Component: 3100 - total flux cleaned = 0.00504318 Jy ! Component: 3150 - total flux cleaned = 0.00510131 Jy ! Component: 3200 - total flux cleaned = 0.00523515 Jy ! Component: 3250 - total flux cleaned = 0.00527287 Jy ! Component: 3300 - total flux cleaned = 0.00523539 Jy ! Component: 3350 - total flux cleaned = 0.00519803 Jy ! Component: 3400 - total flux cleaned = 0.00529049 Jy ! Component: 3450 - total flux cleaned = 0.00534515 Jy ! Component: 3500 - total flux cleaned = 0.00538157 Jy ! Component: 3550 - total flux cleaned = 0.00547077 Jy ! Component: 3600 - total flux cleaned = 0.00554179 Jy ! Component: 3650 - total flux cleaned = 0.00550645 Jy ! Component: 3700 - total flux cleaned = 0.00555887 Jy ! Component: 3750 - total flux cleaned = 0.00557615 Jy ! Component: 3800 - total flux cleaned = 0.00561048 Jy ! Component: 3850 - total flux cleaned = 0.00561054 Jy ! Component: 3900 - total flux cleaned = 0.00571128 Jy ! Component: 3950 - total flux cleaned = 0.00566132 Jy ! Component: 4000 - total flux cleaned = 0.00566143 Jy ! Component: 4050 - total flux cleaned = 0.00567769 Jy ! Total flux subtracted in 4096 components = 0.00572653 Jy ! Clean residual min=-0.000811 max=0.000841 Jy/beam ! Clean residual mean=-0.000000 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.774882 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 495 components and 0.774882 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0414+3418_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8688 x 1.501 at -3.74 degrees (North through East) ! Clean map min=-0.0023693 max=0.2118 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0414+3418_X_map.fits wmodel /vlbi/uf001/uva//J0414+3418_X_map.mod ! Writing 495 model components to file: /vlbi/uf001/uva//J0414+3418_X_map.mod wobs /vlbi/uf001/uva//J0414+3418_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0414+3418_X_uvs.fits wwins /vlbi/uf001/uva//J0414+3418_X_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uva//J0414+3418_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.211804 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000265208 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.375641 0.375641 0.751282 1.50256 3.00513 6.01025 12.0205 24.041 48.082 96.1641 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.211 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 798.635 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0414+3418_X_dfm.log closed on Sun Jan 13 22:06:47 2019