! Started logfile: /vlbi/uf001/uva//J0407+0638_S_dfm.log on Sun Jan 13 22:02:01 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0407+0638_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0407+0638_S_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.981173 visibilities/baseline/integration-bin.
! Found source: J0407+0638
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 9537 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0407+0638_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001721Jy  sigma=20.663410
! Fit after  self-cal, rms=0.923812Jy  sigma=19.044249
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.782 mas, bmaj=7.041 mas, bpa=-3.982 degrees
! Estimated noise=0.538147 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0579492 Jy
! Component: 100  -  total flux cleaned = 0.0728681 Jy
! Total flux subtracted in 100 components = 0.0728681 Jy
! Clean residual min=-0.003192 max=0.006328 Jy/beam
! Clean residual mean=0.000000 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.0728681 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0728681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062634Jy  sigma=1.227882
! Fit after  self-cal, rms=0.062387Jy  sigma=1.223436
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00710717 Jy
! Component: 100  -  total flux cleaned = 0.0107254 Jy
! Total flux subtracted in 100 components = 0.0107254 Jy
! Clean residual min=-0.002623 max=0.004772 Jy/beam
! Clean residual mean=-0.000002 rms=0.000700 Jy/beam
! Combined flux in latest and established models = 0.0835936 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.0835936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061346Jy  sigma=1.201351
! Fit after  self-cal, rms=0.061337Jy  sigma=1.201102
! Inverting map 
! Added new window around map position (-5.5, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00405408 Jy
! Component: 100  -  total flux cleaned = 0.00614722 Jy
! Total flux subtracted in 100 components = 0.00614722 Jy
! Clean residual min=-0.002536 max=0.003078 Jy/beam
! Clean residual mean=-0.000002 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.0897408 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 32 components and 0.0897408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060999Jy  sigma=1.194212
! Fit after  self-cal, rms=0.060966Jy  sigma=1.193623
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.335 mas, bmaj=7.722 mas, bpa=-3.123 degrees
! Estimated noise=0.357079 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00273121 Jy
! Component: 100  -  total flux cleaned = 0.0042719 Jy
! Component: 150  -  total flux cleaned = 0.00528624 Jy
! Component: 200  -  total flux cleaned = 0.00567926 Jy
! Total flux subtracted in 200 components = 0.00567926 Jy
! Clean residual min=-0.002258 max=0.002100 Jy/beam
! Clean residual mean=-0.000005 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.0954201 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 61 components and 0.0954201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060829Jy  sigma=1.191011
! Fit after  self-cal, rms=0.060818Jy  sigma=1.190777
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.335 x 7.722 at -3.123 degrees (North through East)
! Clean map  min=-0.0021239  max=0.076656 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        0.99     KP        1.03     
!   LA        0.97     MK        1.06     NL        1.07     OV        1.04     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        1.01     KP        1.04     
!   LA        1.02     MK        0.99     NL        1.06     OV        0.98     
!   PT        0.93     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.97     KP        1.07     
!   LA        0.98     MK        1.00     NL        1.01     OV        0.98     
!   PT        0.95     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.060818Jy  sigma=1.190777
! Fit after  self-cal, rms=0.060773Jy  sigma=1.187680
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.353 mas, bmaj=7.745 mas, bpa=-3.073 degrees
! Estimated noise=0.356866 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000227054 Jy
! Component: 100  -  total flux cleaned = -0.000445814 Jy
! Component: 150  -  total flux cleaned = -0.000524261 Jy
! Component: 200  -  total flux cleaned = -0.000567164 Jy
! Total flux subtracted in 200 components = -0.000567164 Jy
! Clean residual min=-0.001757 max=0.002003 Jy/beam
! Clean residual mean=-0.000007 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.0948529 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 74 components and 0.0948529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060760Jy  sigma=1.187424
! Fit after  self-cal, rms=0.060779Jy  sigma=1.187293
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060779Jy  sigma=1.187293
! Fit after  self-cal, rms=0.060873Jy  sigma=1.182652
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.353 mas, bmaj=7.747 mas, bpa=-3.131 degrees
! Estimated noise=0.356911 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.57749e-05 Jy
! Component: 100  -  total flux cleaned = -0.000195552 Jy
! Component: 150  -  total flux cleaned = -0.000235772 Jy
! Component: 200  -  total flux cleaned = -0.000273421 Jy
! Total flux subtracted in 200 components = -0.000273421 Jy
! Clean residual min=-0.001530 max=0.001857 Jy/beam
! Clean residual mean=-0.000002 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.0945795 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 79 components and 0.0945795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060865Jy  sigma=1.182496
! Fit after  self-cal, rms=0.060881Jy  sigma=1.182374
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-78, -61.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000420834 Jy
! Component: 100  -  total flux cleaned = 0.00018307 Jy
! Component: 150  -  total flux cleaned = 0.000154208 Jy
! Component: 200  -  total flux cleaned = 0.000129356 Jy
! Total flux subtracted in 200 components = 0.000129356 Jy
! Clean residual min=-0.001416 max=0.001484 Jy/beam
! Clean residual mean=-0.000003 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.0947088 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 95 components and 0.0947089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060827Jy  sigma=1.181241
! Fit after  self-cal, rms=0.060824Jy  sigma=1.181169
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060824Jy  sigma=1.181169
! Fit after  self-cal, rms=0.060966Jy  sigma=1.181000
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.353 mas, bmaj=7.752 mas, bpa=-3.123 degrees
! Estimated noise=0.357071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000269731 Jy
! Component: 100  -  total flux cleaned = 0.000272238 Jy
! Component: 150  -  total flux cleaned = 0.000271616 Jy
! Component: 200  -  total flux cleaned = 0.00028761 Jy
! Total flux subtracted in 200 components = 0.00028761 Jy
! Clean residual min=-0.001395 max=0.001394 Jy/beam
! Clean residual mean=-0.000003 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.0949965 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 104 components and 0.0949965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060954Jy  sigma=1.180743
! Fit after  self-cal, rms=0.060956Jy  sigma=1.180728
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.19312e-05 Jy
! Component: 100  -  total flux cleaned = 5.23293e-05 Jy
! Component: 150  -  total flux cleaned = 7.97695e-05 Jy
! Component: 200  -  total flux cleaned = 7.9829e-05 Jy
! Total flux subtracted in 200 components = 7.9829e-05 Jy
! Clean residual min=-0.001390 max=0.001370 Jy/beam
! Clean residual mean=-0.000003 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.0950763 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 110 components and 0.0950763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060950Jy  sigma=1.180605
! Fit after  self-cal, rms=0.060950Jy  sigma=1.180602
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060950Jy  sigma=1.180602
! Fit after  self-cal, rms=0.060947Jy  sigma=1.180585
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.316 mas, bmaj=11.55 mas, bpa=-4.041 degrees
! Estimated noise=0.44578 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000442325 Jy
! Component: 100  -  total flux cleaned = -0.000547334 Jy
! Component: 150  -  total flux cleaned = -0.000536129 Jy
! Component: 200  -  total flux cleaned = -0.000536415 Jy
! Total flux subtracted in 200 components = -0.000536415 Jy
! Clean residual min=-0.001911 max=0.001333 Jy/beam
! Clean residual mean=-0.000006 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.0945399 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 123 components and 0.0945399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060947Jy  sigma=1.180555
! Fit after  self-cal, rms=0.060947Jy  sigma=1.180547
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.91722e-07 Jy
! Component: 100  -  total flux cleaned = 1.67258e-06 Jy
! Component: 150  -  total flux cleaned = 1.83775e-05 Jy
! Component: 200  -  total flux cleaned = 1.08343e-05 Jy
! Total flux subtracted in 200 components = 1.08343e-05 Jy
! Clean residual min=-0.001911 max=0.001327 Jy/beam
! Clean residual mean=-0.000006 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.0945507 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 132 components and 0.0945507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060947Jy  sigma=1.180540
! Fit after  self-cal, rms=0.060947Jy  sigma=1.180539
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.354 mas, bmaj=7.755 mas, bpa=-3.098 degrees
! Estimated noise=0.357045 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.354 x 7.755 at -3.098 degrees (North through East)
! Clean map  min=-0.0014168  max=0.076564 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.794 mas, bmaj=7.061 mas, bpa=-4.004 degrees
! Estimated noise=0.540698 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0581306 Jy
! Component: 100  -  total flux cleaned = 0.0733396 Jy
! Component: 150  -  total flux cleaned = 0.0808554 Jy
! Component: 200  -  total flux cleaned = 0.084704 Jy
! Total flux subtracted in 200 components = 0.084704 Jy
! Clean residual min=-0.002419 max=0.002847 Jy/beam
! Clean residual mean=0.000001 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.084704 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.084704 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.354 mas, bmaj=7.755 mas, bpa=-3.098 degrees
! Estimated noise=0.357045 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00411025 Jy
! Component: 100  -  total flux cleaned = 0.006628 Jy
! Component: 150  -  total flux cleaned = 0.00773476 Jy
! Component: 200  -  total flux cleaned = 0.00824707 Jy
! Total flux subtracted in 200 components = 0.00824707 Jy
! Clean residual min=-0.001638 max=0.001514 Jy/beam
! Clean residual mean=-0.000002 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0929511 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 49 components and 0.0929511 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.316 mas, bmaj=11.55 mas, bpa=-4.041 degrees
! Estimated noise=0.44578 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012299 Jy
! Component: 100  -  total flux cleaned = 0.00130051 Jy
! Component: 150  -  total flux cleaned = 0.00135451 Jy
! Component: 200  -  total flux cleaned = 0.00133022 Jy
! Total flux subtracted in 200 components = 0.00133022 Jy
! Clean residual min=-0.001974 max=0.001375 Jy/beam
! Clean residual mean=-0.000006 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.0942813 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.42721e-06 Jy
! Component: 100  -  total flux cleaned = 1.92573e-05 Jy
! Component: 150  -  total flux cleaned = 1.98061e-05 Jy
! Component: 200  -  total flux cleaned = 4.62041e-05 Jy
! Total flux subtracted in 200 components = 4.62041e-05 Jy
! Clean residual min=-0.001918 max=0.001361 Jy/beam
! Clean residual mean=-0.000006 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.0943275 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 104 components and 0.0943275 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.354 mas, bmaj=7.755 mas, bpa=-3.098 degrees
! Estimated noise=0.357045 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000337203 Jy
! Component: 100  -  total flux cleaned = 0.000476149 Jy
! Component: 150  -  total flux cleaned = 0.000577133 Jy
! Component: 200  -  total flux cleaned = 0.000633494 Jy
! Total flux subtracted in 200 components = 0.000633494 Jy
! Clean residual min=-0.001419 max=0.001452 Jy/beam
! Clean residual mean=-0.000003 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.094961 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 123 components and 0.094961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060971Jy  sigma=1.180923
! Fit after  self-cal, rms=0.060966Jy  sigma=1.180890
wmodel J0407+0638_S_map.mod
! Writing 123 model components to file: J0407+0638_S_map.mod
wobs   J0407+0638_S_uvs.fits
! Writing UV FITS file: J0407+0638_S_uvs.fits
wwins  J0407+0638_S_map.win
! wwins: Wrote 3 windows to J0407+0638_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000211984 Jy
! Component: 100  -  total flux cleaned = -0.000386983 Jy
! Component: 150  -  total flux cleaned = -0.000364 Jy
! Component: 200  -  total flux cleaned = -0.00025196 Jy
! Component: 250  -  total flux cleaned = -0.00014422 Jy
! Component: 300  -  total flux cleaned = -6.10873e-05 Jy
! Component: 350  -  total flux cleaned = 1.963e-05 Jy
! Component: 400  -  total flux cleaned = 9.85341e-05 Jy
! Component: 450  -  total flux cleaned = 0.000156336 Jy
! Component: 500  -  total flux cleaned = 0.000194425 Jy
! Component: 550  -  total flux cleaned = 0.000232123 Jy
! Component: 600  -  total flux cleaned = 0.000268821 Jy
! Component: 650  -  total flux cleaned = 0.000269182 Jy
! Component: 700  -  total flux cleaned = 0.000322202 Jy
! Component: 750  -  total flux cleaned = 0.000322268 Jy
! Component: 800  -  total flux cleaned = 0.000322245 Jy
! Component: 850  -  total flux cleaned = 0.000339189 Jy
! Component: 900  -  total flux cleaned = 0.00038925 Jy
! Component: 950  -  total flux cleaned = 0.000389183 Jy
! Component: 1000  -  total flux cleaned = 0.000486513 Jy
! Component: 1050  -  total flux cleaned = 0.000502546 Jy
! Component: 1100  -  total flux cleaned = 0.000550295 Jy
! Component: 1150  -  total flux cleaned = 0.000644398 Jy
! Component: 1200  -  total flux cleaned = 0.000675037 Jy
! Component: 1250  -  total flux cleaned = 0.000659946 Jy
! Component: 1300  -  total flux cleaned = 0.000735473 Jy
! Component: 1350  -  total flux cleaned = 0.000765337 Jy
! Component: 1400  -  total flux cleaned = 0.000780222 Jy
! Component: 1450  -  total flux cleaned = 0.000809359 Jy
! Component: 1500  -  total flux cleaned = 0.000852816 Jy
! Component: 1550  -  total flux cleaned = 0.000867114 Jy
! Component: 1600  -  total flux cleaned = 0.000909896 Jy
! Component: 1650  -  total flux cleaned = 0.000966089 Jy
! Component: 1700  -  total flux cleaned = 0.00095196 Jy
! Component: 1750  -  total flux cleaned = 0.000979711 Jy
! Component: 1800  -  total flux cleaned = 0.00102075 Jy
! Component: 1850  -  total flux cleaned = 0.00106126 Jy
! Component: 1900  -  total flux cleaned = 0.00106137 Jy
! Component: 1950  -  total flux cleaned = 0.00103516 Jy
! Component: 2000  -  total flux cleaned = 0.00107479 Jy
! Component: 2050  -  total flux cleaned = 0.00108783 Jy
! Component: 2100  -  total flux cleaned = 0.00104916 Jy
! Component: 2150  -  total flux cleaned = 0.001062 Jy
! Component: 2200  -  total flux cleaned = 0.00106187 Jy
! Component: 2250  -  total flux cleaned = 0.00106165 Jy
! Component: 2300  -  total flux cleaned = 0.00103671 Jy
! Component: 2350  -  total flux cleaned = 0.00106135 Jy
! Component: 2400  -  total flux cleaned = 0.00102451 Jy
! Component: 2450  -  total flux cleaned = 0.000988021 Jy
! Component: 2500  -  total flux cleaned = 0.000987893 Jy
! Component: 2550  -  total flux cleaned = 0.000951929 Jy
! Component: 2600  -  total flux cleaned = 0.000916275 Jy
! Component: 2650  -  total flux cleaned = 0.000951629 Jy
! Component: 2700  -  total flux cleaned = 0.000916477 Jy
! Component: 2750  -  total flux cleaned = 0.000904908 Jy
! Component: 2800  -  total flux cleaned = 0.000893321 Jy
! Component: 2850  -  total flux cleaned = 0.000904678 Jy
! Component: 2900  -  total flux cleaned = 0.000904708 Jy
! Component: 2950  -  total flux cleaned = 0.000893457 Jy
! Component: 3000  -  total flux cleaned = 0.000927042 Jy
! Component: 3050  -  total flux cleaned = 0.000926951 Jy
! Component: 3100  -  total flux cleaned = 0.00089389 Jy
! Component: 3150  -  total flux cleaned = 0.000926687 Jy
! Component: 3200  -  total flux cleaned = 0.000883175 Jy
! Component: 3250  -  total flux cleaned = 0.000883298 Jy
! Component: 3300  -  total flux cleaned = 0.000883396 Jy
! Component: 3350  -  total flux cleaned = 0.000883458 Jy
! Component: 3400  -  total flux cleaned = 0.000957504 Jy
! Component: 3450  -  total flux cleaned = 0.000947046 Jy
! Component: 3500  -  total flux cleaned = 0.000947156 Jy
! Component: 3550  -  total flux cleaned = 0.000967871 Jy
! Component: 3600  -  total flux cleaned = 0.000988347 Jy
! Component: 3650  -  total flux cleaned = 0.00094747 Jy
! Component: 3700  -  total flux cleaned = 0.00093712 Jy
! Component: 3750  -  total flux cleaned = 0.000937105 Jy
! Component: 3800  -  total flux cleaned = 0.000937247 Jy
! Component: 3850  -  total flux cleaned = 0.000967255 Jy
! Component: 3900  -  total flux cleaned = 0.000957262 Jy
! Component: 3950  -  total flux cleaned = 0.000967146 Jy
! Component: 4000  -  total flux cleaned = 0.000918173 Jy
! Component: 4050  -  total flux cleaned = 0.000918246 Jy
! Total flux subtracted in 4096 components = 0.000947304 Jy
! Clean residual min=-0.000615 max=0.000578 Jy/beam
! Clean residual mean=0.000001 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.0959083 Jy
keep
! Adding 322 model components to the UV plane model.
! The established model now contains 445 components and 0.0959084 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0407+0638_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.354 x 7.755 at -3.098 degrees (North through East)
! Clean map  min=-0.0013246  max=0.076485 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0407+0638_S_map.fits
wmodel /vlbi/uf001/uva//J0407+0638_S_map.mod
! Writing 445 model components to file: /vlbi/uf001/uva//J0407+0638_S_map.mod
wobs   /vlbi/uf001/uva//J0407+0638_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0407+0638_S_uvs.fits
wwins  /vlbi/uf001/uva//J0407+0638_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0407+0638_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0764853 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000186062 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.729796 0.729796 1.45959 2.91918 5.83837 11.6767 23.3535 46.7069 93.4139
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.076 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  411.073 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0407+0638_S_dfm.log closed on Sun Jan 13 22:02:06 2019