! Started logfile: /vlbi/uf001/uva//J0406-2355_X_dfm.log on Sun Jan 13 22:01:55 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0406-2355_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0406-2355_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.98287 visibilities/baseline/integration-bin.
! Found source: J0406-2355
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25476 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0406-2355_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008776Jy  sigma=20.523293
! Fit after  self-cal, rms=0.868403Jy  sigma=17.659253
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6127 mas, bmaj=1.649 mas, bpa=-5.44 degrees
! Estimated noise=0.477384 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102918 Jy
! Component: 100  -  total flux cleaned = 0.125361 Jy
! Total flux subtracted in 100 components = 0.125361 Jy
! Clean residual min=-0.003973 max=0.007986 Jy/beam
! Clean residual mean=-0.000012 rms=0.001032 Jy/beam
! Combined flux in latest and established models = 0.125361 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.125361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068081Jy  sigma=1.271752
! Fit after  self-cal, rms=0.068076Jy  sigma=1.271679
! Inverting map 
! Added new window around map position (1.8, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00707748 Jy
! Component: 100  -  total flux cleaned = 0.00929374 Jy
! Total flux subtracted in 100 components = 0.00929374 Jy
! Clean residual min=-0.003986 max=0.006299 Jy/beam
! Clean residual mean=-0.000009 rms=0.000915 Jy/beam
! Combined flux in latest and established models = 0.134655 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.134655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067321Jy  sigma=1.252845
! Fit after  self-cal, rms=0.067269Jy  sigma=1.251466
! Inverting map 
! Added new window around map position (-1.4, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00521011 Jy
! Component: 100  -  total flux cleaned = 0.00809373 Jy
! Total flux subtracted in 100 components = 0.00809373 Jy
! Clean residual min=-0.005184 max=0.004501 Jy/beam
! Clean residual mean=-0.000006 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.142749 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 18 components and 0.142749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066757Jy  sigma=1.238722
! Fit after  self-cal, rms=0.066739Jy  sigma=1.238301
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7988 mas, bmaj=2.069 mas, bpa=-4.438 degrees
! Estimated noise=0.221463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00528167 Jy
! Component: 100  -  total flux cleaned = 0.00839891 Jy
! Component: 150  -  total flux cleaned = 0.0106838 Jy
! Component: 200  -  total flux cleaned = 0.0124619 Jy
! Total flux subtracted in 200 components = 0.0124619 Jy
! Clean residual min=-0.004454 max=0.003918 Jy/beam
! Clean residual mean=-0.000007 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.155211 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 40 components and 0.155211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066278Jy  sigma=1.227644
! Fit after  self-cal, rms=0.066227Jy  sigma=1.226399
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7988 x 2.069 at -4.438 degrees (North through East)
! Clean map  min=-0.0033216  max=0.13016 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.00     HN        0.98     KP        1.00     
!   LA        0.97     MK        1.02     NL        1.07     OV        0.96     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.00     HN        0.98     KP        1.02     
!   LA        0.96     MK        1.03     NL        1.06     OV        0.93     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.03     HN        1.02     KP        0.99     
!   LA        0.98     MK        1.02     NL        1.04     OV        0.92     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.07     OV        0.95     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.99     HN        0.99     KP        1.01     
!   LA        0.98     MK        0.99     NL        1.10     OV        0.92     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.00     HN        1.00     KP        1.00     
!   LA        0.95     MK        1.04     NL        1.09     OV        0.90     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        0.94     KP        1.01     
!   LA        0.97     MK        0.99     NL        1.07     OV        0.93     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.01     HN        0.98     KP        0.98     
!   LA        0.94     MK        1.00     NL        1.09     OV        0.91     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.02     HN        0.97     KP        0.97     
!   LA        0.96     MK        0.97     NL        1.07     OV        0.92     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.01     HN        0.94     KP        0.98     
!   LA        0.97     MK        1.00     NL        1.05     OV        0.89     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.98     HN        1.00     KP        1.00     
!   LA        0.96     MK        0.98     NL        1.08     OV        0.92     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.97     HN        0.96     KP        0.95     
!   LA        0.96     MK        1.01     NL        1.05     OV        0.90     
!   PT        0.97     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.066227Jy  sigma=1.226399
! Fit after  self-cal, rms=0.065086Jy  sigma=1.209871
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7982 mas, bmaj=2.079 mas, bpa=-4.254 degrees
! Estimated noise=0.220743 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00158147 Jy
! Component: 100  -  total flux cleaned = -0.00147499 Jy
! Component: 150  -  total flux cleaned = -0.00147132 Jy
! Component: 200  -  total flux cleaned = -0.00147019 Jy
! Total flux subtracted in 200 components = -0.00147019 Jy
! Clean residual min=-0.001657 max=0.001353 Jy/beam
! Clean residual mean=-0.000001 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.15374 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 64 components and 0.15374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065022Jy  sigma=1.208637
! Fit after  self-cal, rms=0.065050Jy  sigma=1.208254
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065050Jy  sigma=1.208254
! Fit after  self-cal, rms=0.064950Jy  sigma=1.207046
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7978 mas, bmaj=2.077 mas, bpa=-4.196 degrees
! Estimated noise=0.220646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000838763 Jy
! Component: 100  -  total flux cleaned = -0.000947581 Jy
! Component: 150  -  total flux cleaned = -0.000994085 Jy
! Component: 200  -  total flux cleaned = -0.00105806 Jy
! Total flux subtracted in 200 components = -0.00105806 Jy
! Clean residual min=-0.001465 max=0.001268 Jy/beam
! Clean residual mean=-0.000001 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.152682 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 74 components and 0.152682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064919Jy  sigma=1.206486
! Fit after  self-cal, rms=0.064915Jy  sigma=1.206391
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000106508 Jy
! Component: 100  -  total flux cleaned = -0.00012844 Jy
! Component: 150  -  total flux cleaned = -0.000146867 Jy
! Component: 200  -  total flux cleaned = -0.000164692 Jy
! Total flux subtracted in 200 components = -0.000164692 Jy
! Clean residual min=-0.001376 max=0.001226 Jy/beam
! Clean residual mean=-0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.152518 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 81 components and 0.152518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064899Jy  sigma=1.206157
! Fit after  self-cal, rms=0.064897Jy  sigma=1.206118
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064897Jy  sigma=1.206118
! Fit after  self-cal, rms=0.064809Jy  sigma=1.205276
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7973 mas, bmaj=2.076 mas, bpa=-4.141 degrees
! Estimated noise=0.2205 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000679275 Jy
! Component: 100  -  total flux cleaned = -0.000865083 Jy
! Component: 150  -  total flux cleaned = -0.000899529 Jy
! Component: 200  -  total flux cleaned = -0.000946619 Jy
! Total flux subtracted in 200 components = -0.000946619 Jy
! Clean residual min=-0.001260 max=0.001188 Jy/beam
! Clean residual mean=-0.000001 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.151571 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 91 components and 0.151571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064794Jy  sigma=1.204991
! Fit after  self-cal, rms=0.064794Jy  sigma=1.204955
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.15107e-05 Jy
! Component: 100  -  total flux cleaned = -6.10234e-05 Jy
! Component: 150  -  total flux cleaned = -8.82272e-05 Jy
! Component: 200  -  total flux cleaned = -0.000127534 Jy
! Total flux subtracted in 200 components = -0.000127534 Jy
! Clean residual min=-0.001207 max=0.001164 Jy/beam
! Clean residual mean=-0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.151444 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 94 components and 0.151444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064787Jy  sigma=1.204842
! Fit after  self-cal, rms=0.064786Jy  sigma=1.204828
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064786Jy  sigma=1.204828
! Fit after  self-cal, rms=0.064696Jy  sigma=1.204745
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.181 mas, bmaj=5.091 mas, bpa=0.7394 degrees
! Estimated noise=0.285584 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000632576 Jy
! Component: 100  -  total flux cleaned = -0.000784634 Jy
! Component: 150  -  total flux cleaned = -0.000815122 Jy
! Component: 200  -  total flux cleaned = -0.000806538 Jy
! Total flux subtracted in 200 components = -0.000806538 Jy
! Clean residual min=-0.001305 max=0.001167 Jy/beam
! Clean residual mean=-0.000002 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.150637 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 104 components and 0.150637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064695Jy  sigma=1.204693
! Fit after  self-cal, rms=0.064694Jy  sigma=1.204681
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.03475e-05 Jy
! Component: 100  -  total flux cleaned = -6.46938e-05 Jy
! Component: 150  -  total flux cleaned = -6.47123e-05 Jy
! Component: 200  -  total flux cleaned = -5.72926e-05 Jy
! Total flux subtracted in 200 components = -5.72926e-05 Jy
! Clean residual min=-0.001278 max=0.001171 Jy/beam
! Clean residual mean=-0.000002 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.15058 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 109 components and 0.15058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064694Jy  sigma=1.204691
! Fit after  self-cal, rms=0.064694Jy  sigma=1.204689
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7968 mas, bmaj=2.075 mas, bpa=-4.105 degrees
! Estimated noise=0.220359 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7968 x 2.075 at -4.105 degrees (North through East)
! Clean map  min=-0.0010512  max=0.13043 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6111 mas, bmaj=1.653 mas, bpa=-5.079 degrees
! Estimated noise=0.476332 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102648 Jy
! Component: 100  -  total flux cleaned = 0.125075 Jy
! Component: 150  -  total flux cleaned = 0.132491 Jy
! Component: 200  -  total flux cleaned = 0.136858 Jy
! Total flux subtracted in 200 components = 0.136858 Jy
! Clean residual min=-0.002335 max=0.002958 Jy/beam
! Clean residual mean=-0.000005 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.136858 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.136858 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7968 mas, bmaj=2.075 mas, bpa=-4.105 degrees
! Estimated noise=0.220359 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00478033 Jy
! Component: 100  -  total flux cleaned = 0.00763174 Jy
! Component: 150  -  total flux cleaned = 0.00957224 Jy
! Component: 200  -  total flux cleaned = 0.0109555 Jy
! Total flux subtracted in 200 components = 0.0109555 Jy
! Clean residual min=-0.001339 max=0.001553 Jy/beam
! Clean residual mean=-0.000003 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.147813 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 42 components and 0.147813 Jy
! Inverting map 
! Added new window around map position (-21.2, -29.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134363 Jy
! Component: 100  -  total flux cleaned = 0.0019196 Jy
! Component: 150  -  total flux cleaned = 0.00224924 Jy
! Component: 200  -  total flux cleaned = 0.00234602 Jy
! Total flux subtracted in 200 components = 0.00234602 Jy
! Clean residual min=-0.001208 max=0.001122 Jy/beam
! Clean residual mean=-0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.150159 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 60 components and 0.150159 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.181 mas, bmaj=5.091 mas, bpa=0.7394 degrees
! Estimated noise=0.285584 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000609356 Jy
! Component: 100  -  total flux cleaned = 0.000733045 Jy
! Component: 150  -  total flux cleaned = 0.000746418 Jy
! Component: 200  -  total flux cleaned = 0.000771353 Jy
! Total flux subtracted in 200 components = 0.000771353 Jy
! Clean residual min=-0.001251 max=0.001127 Jy/beam
! Clean residual mean=-0.000002 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.150931 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.09517e-05 Jy
! Component: 100  -  total flux cleaned = -2.06728e-05 Jy
! Component: 150  -  total flux cleaned = -2.02098e-05 Jy
! Component: 200  -  total flux cleaned = -2.05228e-05 Jy
! Total flux subtracted in 200 components = -2.05228e-05 Jy
! Clean residual min=-0.001234 max=0.001106 Jy/beam
! Clean residual mean=-0.000001 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.15091 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 77 components and 0.15091 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7968 mas, bmaj=2.075 mas, bpa=-4.105 degrees
! Estimated noise=0.220359 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000152594 Jy
! Component: 100  -  total flux cleaned = -0.000172076 Jy
! Component: 150  -  total flux cleaned = -0.000207554 Jy
! Component: 200  -  total flux cleaned = -0.000240415 Jy
! Total flux subtracted in 200 components = -0.000240415 Jy
! Clean residual min=-0.001120 max=0.001121 Jy/beam
! Clean residual mean=-0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.15067 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 90 components and 0.15067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064676Jy  sigma=1.204339
! Fit after  self-cal, rms=0.064671Jy  sigma=1.204249
wmodel J0406-2355_X_map.mod
! Writing 90 model components to file: J0406-2355_X_map.mod
wobs   J0406-2355_X_uvs.fits
! Writing UV FITS file: J0406-2355_X_uvs.fits
wwins  J0406-2355_X_map.win
! wwins: Wrote 5 windows to J0406-2355_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 3.67426e-06 Jy
! Component: 100  -  total flux cleaned = -0.000127459 Jy
! Component: 150  -  total flux cleaned = -0.000181794 Jy
! Component: 200  -  total flux cleaned = -0.000164711 Jy
! Component: 250  -  total flux cleaned = -0.000198413 Jy
! Component: 300  -  total flux cleaned = -0.000199097 Jy
! Component: 350  -  total flux cleaned = -0.000199317 Jy
! Component: 400  -  total flux cleaned = -0.000167995 Jy
! Component: 450  -  total flux cleaned = -0.000152577 Jy
! Component: 500  -  total flux cleaned = -0.000137515 Jy
! Component: 550  -  total flux cleaned = -0.000108105 Jy
! Component: 600  -  total flux cleaned = -5.03139e-05 Jy
! Component: 650  -  total flux cleaned = -3.62598e-05 Jy
! Component: 700  -  total flux cleaned = -3.63382e-05 Jy
! Component: 750  -  total flux cleaned = 1.87806e-05 Jy
! Component: 800  -  total flux cleaned = -4.92382e-05 Jy
! Component: 850  -  total flux cleaned = -4.92489e-05 Jy
! Component: 900  -  total flux cleaned = -7.56079e-05 Jy
! Component: 950  -  total flux cleaned = -0.00010154 Jy
! Component: 1000  -  total flux cleaned = -0.000101523 Jy
! Component: 1050  -  total flux cleaned = -8.87608e-05 Jy
! Component: 1100  -  total flux cleaned = -8.88669e-05 Jy
! Component: 1150  -  total flux cleaned = -0.00010147 Jy
! Component: 1200  -  total flux cleaned = -0.000138397 Jy
! Component: 1250  -  total flux cleaned = -0.000150284 Jy
! Component: 1300  -  total flux cleaned = -0.000186313 Jy
! Component: 1350  -  total flux cleaned = -0.000150818 Jy
! Component: 1400  -  total flux cleaned = -0.000197752 Jy
! Component: 1450  -  total flux cleaned = -0.000232499 Jy
! Component: 1500  -  total flux cleaned = -0.000266688 Jy
! Component: 1550  -  total flux cleaned = -0.000289156 Jy
! Component: 1600  -  total flux cleaned = -0.00026666 Jy
! Component: 1650  -  total flux cleaned = -0.000289034 Jy
! Component: 1700  -  total flux cleaned = -0.000289116 Jy
! Component: 1750  -  total flux cleaned = -0.00030012 Jy
! Component: 1800  -  total flux cleaned = -0.00027861 Jy
! Component: 1850  -  total flux cleaned = -0.000289339 Jy
! Component: 1900  -  total flux cleaned = -0.000320972 Jy
! Component: 1950  -  total flux cleaned = -0.000352355 Jy
! Component: 2000  -  total flux cleaned = -0.000341873 Jy
! Component: 2050  -  total flux cleaned = -0.000331655 Jy
! Component: 2100  -  total flux cleaned = -0.000392869 Jy
! Component: 2150  -  total flux cleaned = -0.000352383 Jy
! Component: 2200  -  total flux cleaned = -0.000342432 Jy
! Component: 2250  -  total flux cleaned = -0.000332512 Jy
! Component: 2300  -  total flux cleaned = -0.00035225 Jy
! Component: 2350  -  total flux cleaned = -0.000342551 Jy
! Component: 2400  -  total flux cleaned = -0.000332907 Jy
! Component: 2450  -  total flux cleaned = -0.000313693 Jy
! Component: 2500  -  total flux cleaned = -0.000304249 Jy
! Component: 2550  -  total flux cleaned = -0.000294829 Jy
! Component: 2600  -  total flux cleaned = -0.000285477 Jy
! Component: 2650  -  total flux cleaned = -0.000257479 Jy
! Component: 2700  -  total flux cleaned = -0.000303789 Jy
! Component: 2750  -  total flux cleaned = -0.00027615 Jy
! Component: 2800  -  total flux cleaned = -0.000267013 Jy
! Component: 2850  -  total flux cleaned = -0.000239849 Jy
! Component: 2900  -  total flux cleaned = -0.000266896 Jy
! Component: 2950  -  total flux cleaned = -0.000249015 Jy
! Component: 3000  -  total flux cleaned = -0.000257884 Jy
! Component: 3050  -  total flux cleaned = -0.000275573 Jy
! Component: 3100  -  total flux cleaned = -0.000240482 Jy
! Component: 3150  -  total flux cleaned = -0.00024055 Jy
! Component: 3200  -  total flux cleaned = -0.000214603 Jy
! Component: 3250  -  total flux cleaned = -0.000240482 Jy
! Component: 3300  -  total flux cleaned = -0.000231887 Jy
! Component: 3350  -  total flux cleaned = -0.000206354 Jy
! Component: 3400  -  total flux cleaned = -0.000231705 Jy
! Component: 3450  -  total flux cleaned = -0.000240088 Jy
! Component: 3500  -  total flux cleaned = -0.000240171 Jy
! Component: 3550  -  total flux cleaned = -0.000264992 Jy
! Component: 3600  -  total flux cleaned = -0.000297987 Jy
! Component: 3650  -  total flux cleaned = -0.000256927 Jy
! Component: 3700  -  total flux cleaned = -0.000281367 Jy
! Component: 3750  -  total flux cleaned = -0.00031385 Jy
! Component: 3800  -  total flux cleaned = -0.000313933 Jy
! Component: 3850  -  total flux cleaned = -0.000338045 Jy
! Component: 3900  -  total flux cleaned = -0.000346051 Jy
! Component: 3950  -  total flux cleaned = -0.000369875 Jy
! Component: 4000  -  total flux cleaned = -0.000377715 Jy
! Component: 4050  -  total flux cleaned = -0.000393495 Jy
! Total flux subtracted in 4096 components = -0.000377841 Jy
! Clean residual min=-0.000501 max=0.000527 Jy/beam
! Clean residual mean=-0.000001 rms=0.000135 Jy/beam
! Combined flux in latest and established models = 0.150292 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 372 components and 0.150292 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0406-2355_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7968 x 2.075 at -4.105 degrees (North through East)
! Clean map  min=-0.0006959  max=0.1309 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0406-2355_X_map.fits
wmodel /vlbi/uf001/uva//J0406-2355_X_map.mod
! Writing 372 model components to file: /vlbi/uf001/uva//J0406-2355_X_map.mod
wobs   /vlbi/uf001/uva//J0406-2355_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0406-2355_X_uvs.fits
wwins  /vlbi/uf001/uva//J0406-2355_X_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J0406-2355_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.130904 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000134054 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.307218 0.307218 0.614437 1.22887 2.45775 4.91549 9.83099 19.662 39.324 78.6479
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.13 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  976.504 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0406-2355_X_dfm.log closed on Sun Jan 13 22:02:01 2019