! Started logfile: /vlbi/uf001/uva//J0406+0637_S_dfm.log on Sun Jan 13 22:01:25 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0406+0637_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0406+0637_S_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.967251 visibilities/baseline/integration-bin. ! Found source: J0406+0637 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7443 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0406+0637_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.013525Jy sigma=21.892617 ! Fit after self-cal, rms=0.782218Jy sigma=16.977973 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.866 mas, bmaj=7.165 mas, bpa=-4.466 degrees ! Estimated noise=0.536295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165794 Jy ! Component: 100 - total flux cleaned = 0.207178 Jy ! Total flux subtracted in 100 components = 0.207178 Jy ! Clean residual min=-0.009946 max=0.017066 Jy/beam ! Clean residual mean=0.000002 rms=0.002351 Jy/beam ! Combined flux in latest and established models = 0.207178 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.207178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.084091Jy sigma=1.596215 ! Fit after self-cal, rms=0.084069Jy sigma=1.595926 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186248 Jy ! Component: 100 - total flux cleaned = 0.0279261 Jy ! Total flux subtracted in 100 components = 0.0279261 Jy ! Clean residual min=-0.007547 max=0.016462 Jy/beam ! Clean residual mean=-0.000005 rms=0.001919 Jy/beam ! Combined flux in latest and established models = 0.235104 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.235104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078906Jy sigma=1.499266 ! Fit after self-cal, rms=0.078888Jy sigma=1.498866 ! Inverting map ! Added new window around map position (-27.5, -10). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148161 Jy ! Component: 100 - total flux cleaned = 0.0222324 Jy ! Total flux subtracted in 100 components = 0.0222324 Jy ! Clean residual min=-0.007065 max=0.007844 Jy/beam ! Clean residual mean=-0.000003 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.257336 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 42 components and 0.257336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075406Jy sigma=1.411327 ! Fit after self-cal, rms=0.075253Jy sigma=1.408361 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=7.737 mas, bpa=-3.02 degrees ! Estimated noise=0.391909 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00898046 Jy ! Component: 100 - total flux cleaned = 0.0152617 Jy ! Component: 150 - total flux cleaned = 0.0202792 Jy ! Component: 200 - total flux cleaned = 0.0243818 Jy ! Total flux subtracted in 200 components = 0.0243818 Jy ! Clean residual min=-0.006579 max=0.008021 Jy/beam ! Clean residual mean=-0.000010 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.281718 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 78 components and 0.281718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073654Jy sigma=1.374205 ! Fit after self-cal, rms=0.073599Jy sigma=1.373051 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.316 x 7.737 at -3.02 degrees (North through East) ! Clean map min=-0.0066123 max=0.21762 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.02 KP 1.06 ! LA 0.97 MK 1.02 NL 1.11 OV 1.00 ! PT 0.92 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.98 HN 1.00 KP 1.04 ! LA 0.96 MK 1.00 NL 1.08 OV 1.01 ! PT 0.92 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.04 KP 1.02 ! LA 0.94 MK 1.01 NL 1.05 OV 1.01 ! PT 0.92 SC 1.05 ! ! ! Fit before self-cal, rms=0.073599Jy sigma=1.373051 ! Fit after self-cal, rms=0.070594Jy sigma=1.331904 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=7.798 mas, bpa=-3.161 degrees ! Estimated noise=0.391502 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00655753 Jy ! Component: 100 - total flux cleaned = 0.0104174 Jy ! Component: 150 - total flux cleaned = 0.0116924 Jy ! Component: 200 - total flux cleaned = 0.0129062 Jy ! Total flux subtracted in 200 components = 0.0129062 Jy ! Clean residual min=-0.003738 max=0.003645 Jy/beam ! Clean residual mean=-0.000018 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.294624 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 110 components and 0.294624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069910Jy sigma=1.315003 ! Fit after self-cal, rms=0.069880Jy sigma=1.314016 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069880Jy sigma=1.314016 ! Fit after self-cal, rms=0.063922Jy sigma=1.277570 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=7.795 mas, bpa=-3.152 degrees ! Estimated noise=0.391205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210341 Jy ! Component: 100 - total flux cleaned = 0.0029891 Jy ! Component: 150 - total flux cleaned = 0.0036252 Jy ! Component: 200 - total flux cleaned = 0.00392164 Jy ! Total flux subtracted in 200 components = 0.00392164 Jy ! Clean residual min=-0.002238 max=0.002272 Jy/beam ! Clean residual mean=-0.000001 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.298546 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 133 components and 0.298546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063811Jy sigma=1.275389 ! Fit after self-cal, rms=0.063800Jy sigma=1.275223 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000552078 Jy ! Component: 100 - total flux cleaned = 0.000625665 Jy ! Component: 150 - total flux cleaned = 0.00065866 Jy ! Component: 200 - total flux cleaned = 0.000659069 Jy ! Total flux subtracted in 200 components = 0.000659069 Jy ! Clean residual min=-0.002219 max=0.002157 Jy/beam ! Clean residual mean=-0.000001 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.299205 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 147 components and 0.299205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063759Jy sigma=1.274592 ! Fit after self-cal, rms=0.063758Jy sigma=1.274579 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063758Jy sigma=1.274579 ! Fit after self-cal, rms=0.062432Jy sigma=1.267666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=7.783 mas, bpa=-3.093 degrees ! Estimated noise=0.390381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000543192 Jy ! Component: 100 - total flux cleaned = 0.000715115 Jy ! Component: 150 - total flux cleaned = 0.000719058 Jy ! Component: 200 - total flux cleaned = 0.00062429 Jy ! Total flux subtracted in 200 components = 0.00062429 Jy ! Clean residual min=-0.001664 max=0.001827 Jy/beam ! Clean residual mean=-0.000000 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.299829 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 157 components and 0.299829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062375Jy sigma=1.266856 ! Fit after self-cal, rms=0.062367Jy sigma=1.266807 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103592 Jy ! Component: 100 - total flux cleaned = 1.92014e-05 Jy ! Component: 150 - total flux cleaned = -6.07544e-05 Jy ! Component: 200 - total flux cleaned = -0.000111862 Jy ! Total flux subtracted in 200 components = -0.000111862 Jy ! Clean residual min=-0.001609 max=0.001789 Jy/beam ! Clean residual mean=-0.000000 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.299718 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 165 components and 0.299718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062342Jy sigma=1.266404 ! Fit after self-cal, rms=0.062343Jy sigma=1.266398 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062343Jy sigma=1.266398 ! Fit after self-cal, rms=0.062326Jy sigma=1.266310 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.365 mas, bmaj=11.62 mas, bpa=-4.181 degrees ! Estimated noise=0.484714 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507525 Jy ! Component: 100 - total flux cleaned = 0.000399408 Jy ! Component: 150 - total flux cleaned = 0.000281871 Jy ! Component: 200 - total flux cleaned = 0.000179829 Jy ! Total flux subtracted in 200 components = 0.000179829 Jy ! Clean residual min=-0.001912 max=0.002383 Jy/beam ! Clean residual mean=-0.000002 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.299897 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 177 components and 0.299897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062315Jy sigma=1.266233 ! Fit after self-cal, rms=0.062313Jy sigma=1.266209 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.28556e-05 Jy ! Component: 100 - total flux cleaned = -6.8096e-05 Jy ! Component: 150 - total flux cleaned = -0.000115163 Jy ! Component: 200 - total flux cleaned = -0.000128535 Jy ! Total flux subtracted in 200 components = -0.000128535 Jy ! Clean residual min=-0.001884 max=0.002372 Jy/beam ! Clean residual mean=-0.000002 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.299769 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 183 components and 0.299769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062311Jy sigma=1.266262 ! Fit after self-cal, rms=0.062310Jy sigma=1.266253 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=7.782 mas, bpa=-3.069 degrees ! Estimated noise=0.390271 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.356 x 7.782 at -3.069 degrees (North through East) ! Clean map min=-0.0016638 max=0.21744 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.897 mas, bmaj=7.171 mas, bpa=-4.43 degrees ! Estimated noise=0.537713 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.166128 Jy ! Component: 100 - total flux cleaned = 0.206559 Jy ! Component: 150 - total flux cleaned = 0.226847 Jy ! Component: 200 - total flux cleaned = 0.24015 Jy ! Total flux subtracted in 200 components = 0.24015 Jy ! Clean residual min=-0.004807 max=0.007456 Jy/beam ! Clean residual mean=0.000003 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 0.24015 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.24015 Jy ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=7.782 mas, bpa=-3.069 degrees ! Estimated noise=0.390271 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126535 Jy ! Component: 100 - total flux cleaned = 0.0217321 Jy ! Component: 150 - total flux cleaned = 0.028657 Jy ! Component: 200 - total flux cleaned = 0.0340569 Jy ! Total flux subtracted in 200 components = 0.0340569 Jy ! Clean residual min=-0.002588 max=0.003239 Jy/beam ! Clean residual mean=0.000001 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.274206 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 68 components and 0.274206 Jy ! Inverting map ! Added new window around map position (18.5, -45.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00427626 Jy ! Component: 100 - total flux cleaned = 0.00771743 Jy ! Component: 150 - total flux cleaned = 0.0105409 Jy ! Component: 200 - total flux cleaned = 0.0129088 Jy ! Total flux subtracted in 200 components = 0.0129088 Jy ! Clean residual min=-0.002122 max=0.002282 Jy/beam ! Clean residual mean=0.000000 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.287115 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 97 components and 0.287115 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.365 mas, bmaj=11.62 mas, bpa=-4.181 degrees ! Estimated noise=0.484714 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353917 Jy ! Component: 100 - total flux cleaned = 0.0059285 Jy ! Component: 150 - total flux cleaned = 0.00764121 Jy ! Component: 200 - total flux cleaned = 0.00889219 Jy ! Total flux subtracted in 200 components = 0.00889219 Jy ! Clean residual min=-0.001999 max=0.002383 Jy/beam ! Clean residual mean=-0.000002 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.296007 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000935908 Jy ! Component: 100 - total flux cleaned = 0.00135479 Jy ! Component: 150 - total flux cleaned = 0.00156148 Jy ! Component: 200 - total flux cleaned = 0.00174803 Jy ! Total flux subtracted in 200 components = 0.00174803 Jy ! Clean residual min=-0.001892 max=0.002286 Jy/beam ! Clean residual mean=-0.000002 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.297755 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 179 components and 0.297755 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=7.782 mas, bpa=-3.069 degrees ! Estimated noise=0.390271 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014495 Jy ! Component: 100 - total flux cleaned = 0.000265641 Jy ! Component: 150 - total flux cleaned = 0.000334057 Jy ! Component: 200 - total flux cleaned = 0.000393414 Jy ! Total flux subtracted in 200 components = 0.000393414 Jy ! Clean residual min=-0.001764 max=0.001834 Jy/beam ! Clean residual mean=-0.000001 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.298149 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 196 components and 0.298149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062284Jy sigma=1.265876 ! Fit after self-cal, rms=0.062280Jy sigma=1.265785 wmodel J0406+0637_S_map.mod ! Writing 196 model components to file: J0406+0637_S_map.mod wobs J0406+0637_S_uvs.fits ! Writing UV FITS file: J0406+0637_S_uvs.fits wwins J0406+0637_S_map.win ! wwins: Wrote 4 windows to J0406+0637_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000829496 Jy ! Component: 100 - total flux cleaned = 0.00149416 Jy ! Component: 150 - total flux cleaned = 0.00178402 Jy ! Component: 200 - total flux cleaned = 0.00209193 Jy ! Component: 250 - total flux cleaned = 0.00233711 Jy ! Component: 300 - total flux cleaned = 0.00249683 Jy ! Component: 350 - total flux cleaned = 0.00265329 Jy ! Component: 400 - total flux cleaned = 0.00280698 Jy ! Component: 450 - total flux cleaned = 0.0029567 Jy ! Component: 500 - total flux cleaned = 0.0030297 Jy ! Component: 550 - total flux cleaned = 0.00310179 Jy ! Component: 600 - total flux cleaned = 0.00319671 Jy ! Component: 650 - total flux cleaned = 0.00326631 Jy ! Component: 700 - total flux cleaned = 0.00326631 Jy ! Component: 750 - total flux cleaned = 0.00337926 Jy ! Component: 800 - total flux cleaned = 0.00349014 Jy ! Component: 850 - total flux cleaned = 0.00362098 Jy ! Component: 900 - total flux cleaned = 0.00372852 Jy ! Component: 950 - total flux cleaned = 0.00383455 Jy ! Component: 1000 - total flux cleaned = 0.00391856 Jy ! Component: 1050 - total flux cleaned = 0.00400142 Jy ! Component: 1100 - total flux cleaned = 0.00412412 Jy ! Component: 1150 - total flux cleaned = 0.00422527 Jy ! Component: 1200 - total flux cleaned = 0.00432499 Jy ! Component: 1250 - total flux cleaned = 0.00450246 Jy ! Component: 1300 - total flux cleaned = 0.00456075 Jy ! Component: 1350 - total flux cleaned = 0.00463819 Jy ! Component: 1400 - total flux cleaned = 0.00473348 Jy ! Component: 1450 - total flux cleaned = 0.00480917 Jy ! Component: 1500 - total flux cleaned = 0.00486531 Jy ! Component: 1550 - total flux cleaned = 0.00505022 Jy ! Component: 1600 - total flux cleaned = 0.00508669 Jy ! Component: 1650 - total flux cleaned = 0.00515903 Jy ! Component: 1700 - total flux cleaned = 0.00519506 Jy ! Component: 1750 - total flux cleaned = 0.0052305 Jy ! Component: 1800 - total flux cleaned = 0.00533615 Jy ! Component: 1850 - total flux cleaned = 0.00538838 Jy ! Component: 1900 - total flux cleaned = 0.00540558 Jy ! Component: 1950 - total flux cleaned = 0.00542289 Jy ! Component: 2000 - total flux cleaned = 0.00555868 Jy ! Component: 2050 - total flux cleaned = 0.0055752 Jy ! Component: 2100 - total flux cleaned = 0.00555846 Jy ! Component: 2150 - total flux cleaned = 0.00560789 Jy ! Component: 2200 - total flux cleaned = 0.00565704 Jy ! Component: 2250 - total flux cleaned = 0.00562455 Jy ! Component: 2300 - total flux cleaned = 0.00562459 Jy ! Component: 2350 - total flux cleaned = 0.00564094 Jy ! Component: 2400 - total flux cleaned = 0.00562512 Jy ! Component: 2450 - total flux cleaned = 0.00568802 Jy ! Component: 2500 - total flux cleaned = 0.00561001 Jy ! Component: 2550 - total flux cleaned = 0.00564096 Jy ! Component: 2600 - total flux cleaned = 0.00565617 Jy ! Component: 2650 - total flux cleaned = 0.00562548 Jy ! Component: 2700 - total flux cleaned = 0.00556518 Jy ! Component: 2750 - total flux cleaned = 0.00550525 Jy ! Component: 2800 - total flux cleaned = 0.00546076 Jy ! Component: 2850 - total flux cleaned = 0.00550503 Jy ! Component: 2900 - total flux cleaned = 0.0054612 Jy ! Component: 2950 - total flux cleaned = 0.00546112 Jy ! Component: 3000 - total flux cleaned = 0.00543222 Jy ! Component: 3050 - total flux cleaned = 0.00536058 Jy ! Component: 3100 - total flux cleaned = 0.00528973 Jy ! Component: 3150 - total flux cleaned = 0.00526166 Jy ! Component: 3200 - total flux cleaned = 0.00523354 Jy ! Component: 3250 - total flux cleaned = 0.00521961 Jy ! Component: 3300 - total flux cleaned = 0.00512296 Jy ! Component: 3350 - total flux cleaned = 0.00515037 Jy ! Component: 3400 - total flux cleaned = 0.00515036 Jy ! Component: 3450 - total flux cleaned = 0.00504232 Jy ! Component: 3500 - total flux cleaned = 0.00505567 Jy ! Component: 3550 - total flux cleaned = 0.00498911 Jy ! Component: 3600 - total flux cleaned = 0.00500247 Jy ! Component: 3650 - total flux cleaned = 0.00492384 Jy ! Component: 3700 - total flux cleaned = 0.00489767 Jy ! Component: 3750 - total flux cleaned = 0.00484586 Jy ! Component: 3800 - total flux cleaned = 0.00482011 Jy ! Component: 3850 - total flux cleaned = 0.00478188 Jy ! Component: 3900 - total flux cleaned = 0.0047439 Jy ! Component: 3950 - total flux cleaned = 0.0047439 Jy ! Component: 4000 - total flux cleaned = 0.00469366 Jy ! Component: 4050 - total flux cleaned = 0.0046314 Jy ! Total flux subtracted in 4096 components = 0.0045818 Jy ! Clean residual min=-0.001026 max=0.000667 Jy/beam ! Clean residual mean=-0.000002 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.302731 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 492 components and 0.302731 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0406+0637_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.356 x 7.782 at -3.069 degrees (North through East) ! Clean map min=-0.001289 max=0.21758 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0406+0637_S_map.fits wmodel /vlbi/uf001/uva//J0406+0637_S_map.mod ! Writing 492 model components to file: /vlbi/uf001/uva//J0406+0637_S_map.mod wobs /vlbi/uf001/uva//J0406+0637_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0406+0637_S_uvs.fits wwins /vlbi/uf001/uva//J0406+0637_S_map.win ! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0406+0637_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.217577 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000234305 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.323065 0.323065 0.646129 1.29226 2.58452 5.16903 10.3381 20.6761 41.3523 82.7046 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.217 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 928.606 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0406+0637_S_dfm.log closed on Sun Jan 13 22:01:30 2019