! Started logfile: /vlbi/uf001/uvm//J0405-1308_X_b_dfm.log on Sun Jan 13 20:43:40 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0405-1308_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0405-1308_X_b_uvm.fits ! AN table 1: 5 integrations on 10 of 10 possible baselines. ! AN table 2: 5 integrations on 1 of 1 possible baselines. ! AN table 3: 14 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.782998 visibilities/baseline/integration-bin. ! Found source: J0405-1308 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 4200 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0405-1308_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.293417Jy sigma=20.702084 ! Fit after self-cal, rms=0.239787Jy sigma=3.820069 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7509 mas, bmaj=4.263 mas, bpa=-19.19 degrees ! Estimated noise=1.24295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.611638 Jy ! Component: 100 - total flux cleaned = 0.745601 Jy ! Total flux subtracted in 100 components = 0.745601 Jy ! Clean residual min=-0.045581 max=0.048298 Jy/beam ! Clean residual mean=0.000021 rms=0.007895 Jy/beam ! Combined flux in latest and established models = 0.745601 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.745601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.128844Jy sigma=2.103671 ! Fit after self-cal, rms=0.128841Jy sigma=2.103638 ! Inverting map ! Added new window around map position (-2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440636 Jy ! Component: 100 - total flux cleaned = 0.0682477 Jy ! Total flux subtracted in 100 components = 0.0682477 Jy ! Clean residual min=-0.037395 max=0.030239 Jy/beam ! Clean residual mean=0.000019 rms=0.005962 Jy/beam ! Combined flux in latest and established models = 0.813848 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.813848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105176Jy sigma=1.715769 ! Fit after self-cal, rms=0.105018Jy sigma=1.712549 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9894 mas, bmaj=4.586 mas, bpa=-18.25 degrees ! Estimated noise=0.950027 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316429 Jy ! Component: 100 - total flux cleaned = 0.0517156 Jy ! Component: 150 - total flux cleaned = 0.0621219 Jy ! Component: 200 - total flux cleaned = 0.0708977 Jy ! Total flux subtracted in 200 components = 0.0708977 Jy ! Clean residual min=-0.026189 max=0.022059 Jy/beam ! Clean residual mean=-0.000005 rms=0.005826 Jy/beam ! Combined flux in latest and established models = 0.884746 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 0.884746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092270Jy sigma=1.487270 ! Fit after self-cal, rms=0.092195Jy sigma=1.486212 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9894 x 4.586 at -18.25 degrees (North through East) ! Clean map min=-0.027077 max=0.77798 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 0.98 KP 1.01 NL 1.01 ! OV 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 1.00 KP 1.09 LA 0.86 ! MK 1.02 NL 1.09 OV 0.98 PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 0.97 KP 1.01 NL 0.98 ! OV 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 HN 0.99 KP 1.09 LA 0.87 ! MK 1.01 NL 1.09 OV 0.98 PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.01 KP 1.01 NL 0.98 ! OV 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 0.99 KP 1.10 LA 0.88 ! MK 0.99 NL 1.09 OV 0.99 PT 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.01 KP 1.05 NL 0.95 ! OV 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 HN 0.98 KP 1.10 LA 0.90 ! MK 0.98 NL 1.09 OV 0.98 PT 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.01 KP 1.03 NL 0.98 ! OV 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 HN 0.99 KP 1.09 LA 0.89 ! MK 1.01 NL 1.09 OV 0.96 PT 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 0.98 KP 1.01 NL 0.98 ! OV 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 HN 1.01 KP 1.07 LA 0.85 ! MK 1.02 NL 1.10 OV 0.97 PT 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.01 KP 1.00 NL 0.97 ! OV 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 0.99 KP 1.12 LA 0.88 ! MK 1.01 NL 1.08 OV 0.95 PT 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 0.96 KP 1.01 NL 0.95 ! OV 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 0.99 KP 1.11 LA 0.88 ! MK 1.01 NL 1.08 OV 0.96 PT 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 0.97 KP 1.00 NL 0.96 ! OV 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 1.00 KP 1.07 LA 0.86 ! MK 0.99 NL 1.09 OV 0.99 PT 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 0.98 KP 1.01 NL 0.99 ! OV 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 0.99 KP 1.09 LA 0.89 ! MK 0.98 NL 1.06 OV 0.97 PT 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 0.99 KP 1.02 NL 0.98 ! OV 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 0.98 KP 1.10 LA 0.88 ! MK 0.99 NL 1.09 OV 0.97 PT 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.01 KP 1.06 NL 0.98 ! OV 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! LA 0.00* PT 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 HN 1.02 KP 1.08 LA 0.88 ! MK 1.01 NL 1.10 OV 0.96 PT 0.99 ! ! ! Fit before self-cal, rms=0.092195Jy sigma=1.486212 ! Fit after self-cal, rms=0.063627Jy sigma=1.002106 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9999 mas, bmaj=4.597 mas, bpa=-17.98 degrees ! Estimated noise=0.952439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00612495 Jy ! Component: 100 - total flux cleaned = -0.00865458 Jy ! Component: 150 - total flux cleaned = -0.0103385 Jy ! Component: 200 - total flux cleaned = -0.0116255 Jy ! Total flux subtracted in 200 components = -0.0116255 Jy ! Clean residual min=-0.008763 max=0.008208 Jy/beam ! Clean residual mean=0.000000 rms=0.001847 Jy/beam ! Combined flux in latest and established models = 0.87312 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.87312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061735Jy sigma=0.974139 ! Fit after self-cal, rms=0.061747Jy sigma=0.972907 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061747Jy sigma=0.972907 ! Fit after self-cal, rms=0.060249Jy sigma=0.941202 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=4.603 mas, bpa=-17.94 degrees ! Estimated noise=0.952076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00377358 Jy ! Component: 100 - total flux cleaned = -0.00554131 Jy ! Component: 150 - total flux cleaned = -0.00655139 Jy ! Component: 200 - total flux cleaned = -0.00693513 Jy ! Total flux subtracted in 200 components = -0.00693513 Jy ! Clean residual min=-0.006473 max=0.006405 Jy/beam ! Clean residual mean=0.000005 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.866185 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 77 components and 0.866185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059562Jy sigma=0.931431 ! Fit after self-cal, rms=0.059527Jy sigma=0.931189 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.4, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265713 Jy ! Component: 100 - total flux cleaned = 0.00467107 Jy ! Component: 150 - total flux cleaned = 0.00619536 Jy ! Component: 200 - total flux cleaned = 0.00665738 Jy ! Total flux subtracted in 200 components = 0.00665738 Jy ! Clean residual min=-0.004866 max=0.004889 Jy/beam ! Clean residual mean=0.000001 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.872843 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 112 components and 0.872843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058528Jy sigma=0.913966 ! Fit after self-cal, rms=0.058491Jy sigma=0.913384 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058491Jy sigma=0.913384 ! Fit after self-cal, rms=0.058309Jy sigma=0.910212 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=4.605 mas, bpa=-17.93 degrees ! Estimated noise=0.951214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013489 Jy ! Component: 100 - total flux cleaned = -0.00145739 Jy ! Component: 150 - total flux cleaned = -0.00118423 Jy ! Component: 200 - total flux cleaned = -0.00110848 Jy ! Total flux subtracted in 200 components = -0.00110848 Jy ! Clean residual min=-0.003933 max=0.003837 Jy/beam ! Clean residual mean=0.000002 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.871734 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 132 components and 0.871734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057984Jy sigma=0.905190 ! Fit after self-cal, rms=0.057979Jy sigma=0.905079 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000409136 Jy ! Component: 100 - total flux cleaned = 0.000552093 Jy ! Component: 150 - total flux cleaned = 0.000682076 Jy ! Component: 200 - total flux cleaned = 0.000860407 Jy ! Total flux subtracted in 200 components = 0.000860407 Jy ! Clean residual min=-0.003772 max=0.003653 Jy/beam ! Clean residual mean=0.000001 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.872595 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 141 components and 0.872595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057844Jy sigma=0.902829 ! Fit after self-cal, rms=0.057843Jy sigma=0.902768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057843Jy sigma=0.902768 ! Fit after self-cal, rms=0.057828Jy sigma=0.902102 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.092 mas, bmaj=5.293 mas, bpa=-13.59 degrees ! Estimated noise=1.13205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110633 Jy ! Component: 100 - total flux cleaned = -0.000654048 Jy ! Component: 150 - total flux cleaned = -0.00016478 Jy ! Component: 200 - total flux cleaned = 7.04392e-05 Jy ! Total flux subtracted in 200 components = 7.04392e-05 Jy ! Clean residual min=-0.004469 max=0.004162 Jy/beam ! Clean residual mean=0.000003 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.872665 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 174 components and 0.872665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057727Jy sigma=0.900586 ! Fit after self-cal, rms=0.057724Jy sigma=0.900504 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000441834 Jy ! Component: 100 - total flux cleaned = 0.000525053 Jy ! Component: 150 - total flux cleaned = 0.000641109 Jy ! Component: 200 - total flux cleaned = 0.0007138 Jy ! Total flux subtracted in 200 components = 0.0007138 Jy ! Clean residual min=-0.004284 max=0.004060 Jy/beam ! Clean residual mean=0.000003 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.873379 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 191 components and 0.873379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057703Jy sigma=0.900168 ! Fit after self-cal, rms=0.057703Jy sigma=0.900143 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=4.606 mas, bpa=-17.93 degrees ! Estimated noise=0.951286 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.001 x 4.606 at -17.93 degrees (North through East) ! Clean map min=-0.0097209 max=0.77334 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057703Jy sigma=0.900143 ! Fit after self-cal, rms=0.053329Jy sigma=0.819833 ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=4.606 mas, bpa=-17.92 degrees ! Estimated noise=0.951361 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00139349 Jy ! Component: 100 - total flux cleaned = -0.00176859 Jy ! Component: 150 - total flux cleaned = -0.00191342 Jy ! Component: 200 - total flux cleaned = -0.00200014 Jy ! Total flux subtracted in 200 components = -0.00200014 Jy ! Clean residual min=-0.003395 max=0.003554 Jy/beam ! Clean residual mean=0.000002 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.871379 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 211 components and 0.871379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053239Jy sigma=0.818342 ! Fit after self-cal, rms=0.053236Jy sigma=0.818312 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000176371 Jy ! Component: 100 - total flux cleaned = -9.74902e-05 Jy ! Component: 150 - total flux cleaned = -9.79659e-05 Jy ! Component: 200 - total flux cleaned = -6.16889e-05 Jy ! Total flux subtracted in 200 components = -6.16889e-05 Jy ! Clean residual min=-0.003380 max=0.003468 Jy/beam ! Clean residual mean=0.000001 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.871317 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 215 components and 0.871317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053191Jy sigma=0.817490 ! Fit after self-cal, rms=0.053191Jy sigma=0.817476 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053191Jy sigma=0.817476 ! Fit after self-cal, rms=0.053182Jy sigma=0.817213 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7539 mas, bmaj=4.288 mas, bpa=-19.05 degrees ! Estimated noise=1.25437 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.611167 Jy ! Component: 100 - total flux cleaned = 0.74445 Jy ! Component: 150 - total flux cleaned = 0.781383 Jy ! Component: 200 - total flux cleaned = 0.801698 Jy ! Total flux subtracted in 200 components = 0.801698 Jy ! Clean residual min=-0.010931 max=0.015900 Jy/beam ! Clean residual mean=0.000008 rms=0.002369 Jy/beam ! Combined flux in latest and established models = 0.801697 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.801697 Jy ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=4.606 mas, bpa=-17.92 degrees ! Estimated noise=0.951246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184133 Jy ! Component: 100 - total flux cleaned = 0.0278547 Jy ! Component: 150 - total flux cleaned = 0.0342418 Jy ! Component: 200 - total flux cleaned = 0.0387294 Jy ! Total flux subtracted in 200 components = 0.0387294 Jy ! Clean residual min=-0.005511 max=0.006673 Jy/beam ! Clean residual mean=0.000003 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 0.840427 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 52 components and 0.840427 Jy ! Inverting map ! Added new window around map position (28.4, 16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00455104 Jy ! Component: 100 - total flux cleaned = 0.00709254 Jy ! Component: 150 - total flux cleaned = 0.00966724 Jy ! Component: 200 - total flux cleaned = 0.0116072 Jy ! Total flux subtracted in 200 components = 0.0116072 Jy ! Clean residual min=-0.004423 max=0.004540 Jy/beam ! Clean residual mean=0.000004 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.852034 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 82 components and 0.852034 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.093 mas, bmaj=5.294 mas, bpa=-13.58 degrees ! Estimated noise=1.13182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483974 Jy ! Component: 100 - total flux cleaned = 0.00743221 Jy ! Component: 150 - total flux cleaned = 0.00900171 Jy ! Component: 200 - total flux cleaned = 0.0100439 Jy ! Total flux subtracted in 200 components = 0.0100439 Jy ! Clean residual min=-0.004874 max=0.004424 Jy/beam ! Clean residual mean=0.000006 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.862078 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000620357 Jy ! Component: 100 - total flux cleaned = 0.00127461 Jy ! Component: 150 - total flux cleaned = 0.00170352 Jy ! Component: 200 - total flux cleaned = 0.00217621 Jy ! Total flux subtracted in 200 components = 0.00217621 Jy ! Clean residual min=-0.004201 max=0.003874 Jy/beam ! Clean residual mean=0.000005 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.864254 Jy ! Adding 102 model components to the UV plane model. ! The established model now contains 173 components and 0.864254 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.001 mas, bmaj=4.606 mas, bpa=-17.92 degrees ! Estimated noise=0.951246 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000912535 Jy ! Component: 100 - total flux cleaned = -0.000728673 Jy ! Component: 150 - total flux cleaned = -0.000563206 Jy ! Component: 200 - total flux cleaned = -0.000418212 Jy ! Total flux subtracted in 200 components = -0.000418212 Jy ! Clean residual min=-0.003204 max=0.003497 Jy/beam ! Clean residual mean=0.000003 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.863836 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 205 components and 0.863836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053013Jy sigma=0.814486 ! Fit after self-cal, rms=0.052893Jy sigma=0.812911 wmodel J0405-1308_X_b_map.mod ! Writing 205 model components to file: J0405-1308_X_b_map.mod wobs J0405-1308_X_b_uvs.fits ! Writing UV FITS file: J0405-1308_X_b_uvs.fits wwins J0405-1308_X_b_map.win ! wwins: Wrote 5 windows to J0405-1308_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000273288 Jy ! Component: 100 - total flux cleaned = -0.000918205 Jy ! Component: 150 - total flux cleaned = -0.00116575 Jy ! Component: 200 - total flux cleaned = -0.00130751 Jy ! Component: 250 - total flux cleaned = -0.00130819 Jy ! Component: 300 - total flux cleaned = -0.00109396 Jy ! Component: 350 - total flux cleaned = -0.000970802 Jy ! Component: 400 - total flux cleaned = -0.000852054 Jy ! Component: 450 - total flux cleaned = -0.000814143 Jy ! Component: 500 - total flux cleaned = -0.000739777 Jy ! Component: 550 - total flux cleaned = -0.000777402 Jy ! Component: 600 - total flux cleaned = -0.000705999 Jy ! Component: 650 - total flux cleaned = -0.000775345 Jy ! Component: 700 - total flux cleaned = -0.000673381 Jy ! Component: 750 - total flux cleaned = -0.000673536 Jy ! Component: 800 - total flux cleaned = -0.000738457 Jy ! Component: 850 - total flux cleaned = -0.000769788 Jy ! Component: 900 - total flux cleaned = -0.000738274 Jy ! Component: 950 - total flux cleaned = -0.000738274 Jy ! Component: 1000 - total flux cleaned = -0.000769113 Jy ! Component: 1050 - total flux cleaned = -0.000858186 Jy ! Component: 1100 - total flux cleaned = -0.000829284 Jy ! Component: 1150 - total flux cleaned = -0.000973896 Jy ! Component: 1200 - total flux cleaned = -0.000973492 Jy ! Component: 1250 - total flux cleaned = -0.00105728 Jy ! Component: 1300 - total flux cleaned = -0.00111268 Jy ! Component: 1350 - total flux cleaned = -0.00108579 Jy ! Component: 1400 - total flux cleaned = -0.00103293 Jy ! Component: 1450 - total flux cleaned = -0.00103298 Jy ! Component: 1500 - total flux cleaned = -0.0010854 Jy ! Component: 1550 - total flux cleaned = -0.00105986 Jy ! Component: 1600 - total flux cleaned = -0.00113507 Jy ! Component: 1650 - total flux cleaned = -0.00108477 Jy ! Component: 1700 - total flux cleaned = -0.00106005 Jy ! Component: 1750 - total flux cleaned = -0.00108418 Jy ! Component: 1800 - total flux cleaned = -0.00103616 Jy ! Component: 1850 - total flux cleaned = -0.00103598 Jy ! Component: 1900 - total flux cleaned = -0.00108328 Jy ! Component: 1950 - total flux cleaned = -0.00115251 Jy ! Component: 2000 - total flux cleaned = -0.00110635 Jy ! Component: 2050 - total flux cleaned = -0.00108417 Jy ! Component: 2100 - total flux cleaned = -0.00108398 Jy ! Component: 2150 - total flux cleaned = -0.00108362 Jy ! Component: 2200 - total flux cleaned = -0.00114892 Jy ! Component: 2250 - total flux cleaned = -0.00110564 Jy ! Component: 2300 - total flux cleaned = -0.00114896 Jy ! Component: 2350 - total flux cleaned = -0.00121223 Jy ! Component: 2400 - total flux cleaned = -0.0011914 Jy ! Component: 2450 - total flux cleaned = -0.00123288 Jy ! Component: 2500 - total flux cleaned = -0.00117099 Jy ! Component: 2550 - total flux cleaned = -0.00123237 Jy ! Component: 2600 - total flux cleaned = -0.00127263 Jy ! Component: 2650 - total flux cleaned = -0.00123268 Jy ! Component: 2700 - total flux cleaned = -0.00125199 Jy ! Component: 2750 - total flux cleaned = -0.00129092 Jy ! Component: 2800 - total flux cleaned = -0.00127133 Jy ! Component: 2850 - total flux cleaned = -0.0012716 Jy ! Component: 2900 - total flux cleaned = -0.00130967 Jy ! Component: 2950 - total flux cleaned = -0.00130973 Jy ! Component: 3000 - total flux cleaned = -0.00132883 Jy ! Component: 3050 - total flux cleaned = -0.00138459 Jy ! Component: 3100 - total flux cleaned = -0.00138461 Jy ! Component: 3150 - total flux cleaned = -0.00143954 Jy ! Component: 3200 - total flux cleaned = -0.00138518 Jy ! Component: 3250 - total flux cleaned = -0.00134925 Jy ! Component: 3300 - total flux cleaned = -0.00138502 Jy ! Component: 3350 - total flux cleaned = -0.00136736 Jy ! Component: 3400 - total flux cleaned = -0.00133227 Jy ! Component: 3450 - total flux cleaned = -0.00126264 Jy ! Component: 3500 - total flux cleaned = -0.00133223 Jy ! Component: 3550 - total flux cleaned = -0.00134954 Jy ! Component: 3600 - total flux cleaned = -0.0013496 Jy ! Component: 3650 - total flux cleaned = -0.00140062 Jy ! Component: 3700 - total flux cleaned = -0.0014511 Jy ! Component: 3750 - total flux cleaned = -0.00145091 Jy ! Component: 3800 - total flux cleaned = -0.00145087 Jy ! Component: 3850 - total flux cleaned = -0.00148383 Jy ! Component: 3900 - total flux cleaned = -0.00151663 Jy ! Component: 3950 - total flux cleaned = -0.0015004 Jy ! Component: 4000 - total flux cleaned = -0.0015327 Jy ! Component: 4050 - total flux cleaned = -0.00150039 Jy ! Total flux subtracted in 4096 components = -0.0015325 Jy ! Clean residual min=-0.000926 max=0.001170 Jy/beam ! Clean residual mean=0.000003 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.862304 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 470 components and 0.862304 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0405-1308_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.001 x 4.606 at -17.92 degrees (North through East) ! Clean map min=-0.0062224 max=0.77814 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0405-1308_X_b_map.fits wmodel /vlbi/uf001/uvm//J0405-1308_X_b_map.mod ! Writing 470 model components to file: /vlbi/uf001/uvm//J0405-1308_X_b_map.mod wobs /vlbi/uf001/uvm//J0405-1308_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0405-1308_X_b_uvs.fits wwins /vlbi/uf001/uvm//J0405-1308_X_b_map.win ! wwins: Wrote 6 windows to /vlbi/uf001/uvm//J0405-1308_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.778142 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000294545 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.113557 0.113557 0.227114 0.454229 0.908457 1.81691 3.63383 7.26766 14.5353 29.0706 58.1413 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.778 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2641.84 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0405-1308_X_b_dfm.log closed on Sun Jan 13 20:43:44 2019