! Started logfile: /vlbi/uf001/uva//J0359-0310_S_b_dfm.log on Sun Jan 13 21:59:27 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0359-0310_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0359-0310_S_b_uva.fits
! AN table 1: 148 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0359-0310
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 6660 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0359-0310_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001121Jy  sigma=20.295240
! Fit after  self-cal, rms=0.956660Jy  sigma=19.433221
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.003 mas, bmaj=15.26 mas, bpa=-8.485 degrees
! Estimated noise=0.651394 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0325298 Jy
! Component: 100  -  total flux cleaned = 0.0419409 Jy
! Total flux subtracted in 100 components = 0.0419409 Jy
! Clean residual min=-0.004199 max=0.004906 Jy/beam
! Clean residual mean=0.000018 rms=0.001321 Jy/beam
! Combined flux in latest and established models = 0.0419409 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0419409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065999Jy  sigma=1.196321
! Fit after  self-cal, rms=0.064614Jy  sigma=1.172634
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.282 mas, bmaj=15.8 mas, bpa=-10.34 degrees
! Estimated noise=0.442653 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00804443 Jy
! Component: 100  -  total flux cleaned = 0.0120795 Jy
! Component: 150  -  total flux cleaned = 0.0130677 Jy
! Component: 200  -  total flux cleaned = 0.0130761 Jy
! Total flux subtracted in 200 components = 0.0130761 Jy
! Clean residual min=-0.003518 max=0.004252 Jy/beam
! Clean residual mean=0.000021 rms=0.001182 Jy/beam
! Combined flux in latest and established models = 0.055017 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 44 components and 0.055017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063435Jy  sigma=1.154699
! Fit after  self-cal, rms=0.063162Jy  sigma=1.152464
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.282 x 15.8 at -10.34 degrees (North through East)
! Clean map  min=-0.0033539  max=0.046362 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     KP        1.00     LA        0.84     NL        1.25     
!   OV        1.09     PT        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.76     KP        1.04     LA        0.83     NL        1.06     
!   OV        0.92     PT        1.17     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     KP        1.10     LA        1.00     NL        0.92     
!   OV        1.00     PT        1.06     
! 
! 
! Fit before self-cal, rms=0.063162Jy  sigma=1.152464
! Fit after  self-cal, rms=0.060501Jy  sigma=1.141549
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.419 mas, bmaj=15.52 mas, bpa=-9.163 degrees
! Estimated noise=0.43916 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144896 Jy
! Component: 100  -  total flux cleaned = 0.00160747 Jy
! Component: 150  -  total flux cleaned = 0.00147783 Jy
! Component: 200  -  total flux cleaned = 0.00128161 Jy
! Total flux subtracted in 200 components = 0.00128161 Jy
! Clean residual min=-0.002170 max=0.003477 Jy/beam
! Clean residual mean=0.000014 rms=0.000876 Jy/beam
! Combined flux in latest and established models = 0.0562986 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.0562986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060409Jy  sigma=1.139941
! Fit after  self-cal, rms=0.060523Jy  sigma=1.137473
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060523Jy  sigma=1.137473
! Fit after  self-cal, rms=0.060524Jy  sigma=1.133518
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.419 mas, bmaj=15.52 mas, bpa=-9.386 degrees
! Estimated noise=0.442761 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00099347 Jy
! Component: 100  -  total flux cleaned = 0.00116839 Jy
! Component: 150  -  total flux cleaned = 0.00116834 Jy
! Component: 200  -  total flux cleaned = 0.00111129 Jy
! Total flux subtracted in 200 components = 0.00111129 Jy
! Clean residual min=-0.001987 max=0.003248 Jy/beam
! Clean residual mean=0.000014 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.0574099 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 71 components and 0.0574099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060497Jy  sigma=1.133181
! Fit after  self-cal, rms=0.060558Jy  sigma=1.132728
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.2854e-05 Jy
! Component: 100  -  total flux cleaned = -4.56615e-05 Jy
! Component: 150  -  total flux cleaned = -8.17657e-05 Jy
! Component: 200  -  total flux cleaned = -0.000132471 Jy
! Total flux subtracted in 200 components = -0.000132471 Jy
! Clean residual min=-0.002021 max=0.003066 Jy/beam
! Clean residual mean=0.000015 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.0572774 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 79 components and 0.0572774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060545Jy  sigma=1.132566
! Fit after  self-cal, rms=0.060542Jy  sigma=1.132549
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060542Jy  sigma=1.132549
! Fit after  self-cal, rms=0.060696Jy  sigma=1.132120
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.386 mas, bmaj=15.49 mas, bpa=-9.364 degrees
! Estimated noise=0.44201 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000598696 Jy
! Component: 100  -  total flux cleaned = 0.000733833 Jy
! Component: 150  -  total flux cleaned = 0.000817826 Jy
! Component: 200  -  total flux cleaned = 0.000818721 Jy
! Total flux subtracted in 200 components = 0.000818721 Jy
! Clean residual min=-0.002027 max=0.003089 Jy/beam
! Clean residual mean=0.000014 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.0580961 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 85 components and 0.0580961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060682Jy  sigma=1.132035
! Fit after  self-cal, rms=0.060709Jy  sigma=1.131816
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.07316e-05 Jy
! Component: 100  -  total flux cleaned = -2.4076e-05 Jy
! Component: 150  -  total flux cleaned = -6.09598e-05 Jy
! Component: 200  -  total flux cleaned = -8.33657e-05 Jy
! Total flux subtracted in 200 components = -8.33657e-05 Jy
! Clean residual min=-0.001985 max=0.003036 Jy/beam
! Clean residual mean=0.000014 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.0580128 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 88 components and 0.0580128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060703Jy  sigma=1.131759
! Fit after  self-cal, rms=0.060698Jy  sigma=1.131743
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060698Jy  sigma=1.131743
! Fit after  self-cal, rms=0.060518Jy  sigma=1.131656
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.698 mas, bmaj=15.67 mas, bpa=-9.14 degrees
! Estimated noise=0.453425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000701637 Jy
! Component: 100  -  total flux cleaned = 0.000979007 Jy
! Component: 150  -  total flux cleaned = 0.00112331 Jy
! Component: 200  -  total flux cleaned = 0.00122072 Jy
! Total flux subtracted in 200 components = 0.00122072 Jy
! Clean residual min=-0.002101 max=0.003327 Jy/beam
! Clean residual mean=0.000016 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 0.0592335 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 101 components and 0.0592335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060508Jy  sigma=1.131640
! Fit after  self-cal, rms=0.060485Jy  sigma=1.131369
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000124582 Jy
! Component: 100  -  total flux cleaned = 0.000161476 Jy
! Component: 150  -  total flux cleaned = 0.000183842 Jy
! Component: 200  -  total flux cleaned = 0.000215577 Jy
! Total flux subtracted in 200 components = 0.000215577 Jy
! Clean residual min=-0.002100 max=0.003365 Jy/beam
! Clean residual mean=0.000016 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.0594491 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 115 components and 0.0594491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060480Jy  sigma=1.131369
! Fit after  self-cal, rms=0.060474Jy  sigma=1.131342
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.349 mas, bmaj=15.43 mas, bpa=-9.282 degrees
! Estimated noise=0.440239 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.349 x 15.43 at -9.282 degrees (North through East)
! Clean map  min=-0.0020024  max=0.046169 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.075 mas, bmaj=14.88 mas, bpa=-7.769 degrees
! Estimated noise=0.643632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.032622 Jy
! Component: 100  -  total flux cleaned = 0.0440379 Jy
! Component: 150  -  total flux cleaned = 0.0502212 Jy
! Component: 200  -  total flux cleaned = 0.0540216 Jy
! Total flux subtracted in 200 components = 0.0540216 Jy
! Clean residual min=-0.002921 max=0.003323 Jy/beam
! Clean residual mean=0.000010 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.0540216 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.0540216 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.349 mas, bmaj=15.43 mas, bpa=-9.282 degrees
! Estimated noise=0.440239 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0031844 Jy
! Component: 100  -  total flux cleaned = 0.00464241 Jy
! Component: 150  -  total flux cleaned = 0.00483278 Jy
! Component: 200  -  total flux cleaned = 0.00475306 Jy
! Total flux subtracted in 200 components = 0.00475306 Jy
! Clean residual min=-0.002222 max=0.003674 Jy/beam
! Clean residual mean=0.000014 rms=0.000809 Jy/beam
! Combined flux in latest and established models = 0.0587747 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 58 components and 0.0587747 Jy
! Inverting map 
! Added new window around map position (-84.5, 79.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00328103 Jy
! Component: 100  -  total flux cleaned = 0.00491905 Jy
! Component: 150  -  total flux cleaned = 0.00573777 Jy
! Component: 200  -  total flux cleaned = 0.00626185 Jy
! Total flux subtracted in 200 components = 0.00626185 Jy
! Clean residual min=-0.001569 max=0.001784 Jy/beam
! Clean residual mean=0.000008 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.0650365 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 87 components and 0.0650365 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.698 mas, bmaj=15.67 mas, bpa=-9.14 degrees
! Estimated noise=0.453425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000666816 Jy
! Component: 100  -  total flux cleaned = 0.000966538 Jy
! Component: 150  -  total flux cleaned = 0.00119844 Jy
! Component: 200  -  total flux cleaned = 0.00140394 Jy
! Total flux subtracted in 200 components = 0.00140394 Jy
! Clean residual min=-0.001392 max=0.001308 Jy/beam
! Clean residual mean=0.000006 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.0664404 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181709 Jy
! Component: 100  -  total flux cleaned = 0.000342594 Jy
! Component: 150  -  total flux cleaned = 0.000469277 Jy
! Component: 200  -  total flux cleaned = 0.000550755 Jy
! Total flux subtracted in 200 components = 0.000550755 Jy
! Clean residual min=-0.001284 max=0.001117 Jy/beam
! Clean residual mean=0.000005 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.0669912 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 153 components and 0.0669912 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.349 mas, bmaj=15.43 mas, bpa=-9.282 degrees
! Estimated noise=0.440239 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.0623e-06 Jy
! Component: 100  -  total flux cleaned = 2.91388e-05 Jy
! Component: 150  -  total flux cleaned = 7.51752e-05 Jy
! Component: 200  -  total flux cleaned = 0.000104015 Jy
! Total flux subtracted in 200 components = 0.000104015 Jy
! Clean residual min=-0.001266 max=0.001138 Jy/beam
! Clean residual mean=0.000004 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.0670952 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 184 components and 0.0670952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060313Jy  sigma=1.127918
! Fit after  self-cal, rms=0.060189Jy  sigma=1.126111
wmodel J0359-0310_S_b_map.mod
! Writing 184 model components to file: J0359-0310_S_b_map.mod
wobs   J0359-0310_S_b_uvs.fits
! Writing UV FITS file: J0359-0310_S_b_uvs.fits
wwins  J0359-0310_S_b_map.win
! wwins: Wrote 2 windows to J0359-0310_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000322696 Jy
! Component: 100  -  total flux cleaned = 0.000349451 Jy
! Component: 150  -  total flux cleaned = 0.0002617 Jy
! Component: 200  -  total flux cleaned = 0.000162416 Jy
! Component: 250  -  total flux cleaned = 0.000161231 Jy
! Component: 300  -  total flux cleaned = 0.000178538 Jy
! Component: 350  -  total flux cleaned = 0.000227775 Jy
! Component: 400  -  total flux cleaned = 0.000227485 Jy
! Component: 450  -  total flux cleaned = 0.000197835 Jy
! Component: 500  -  total flux cleaned = 0.000127593 Jy
! Component: 550  -  total flux cleaned = 7.33525e-05 Jy
! Component: 600  -  total flux cleaned = 2.12706e-05 Jy
! Component: 650  -  total flux cleaned = -3.71579e-06 Jy
! Component: 700  -  total flux cleaned = -2.85211e-05 Jy
! Component: 750  -  total flux cleaned = -7.58742e-05 Jy
! Component: 800  -  total flux cleaned = -0.000144927 Jy
! Component: 850  -  total flux cleaned = -0.00020088 Jy
! Component: 900  -  total flux cleaned = -0.000288147 Jy
! Component: 950  -  total flux cleaned = -0.00036233 Jy
! Component: 1000  -  total flux cleaned = -0.000403617 Jy
! Component: 1050  -  total flux cleaned = -0.000454233 Jy
! Component: 1100  -  total flux cleaned = -0.000493861 Jy
! Component: 1150  -  total flux cleaned = -0.000532642 Jy
! Component: 1200  -  total flux cleaned = -0.000542117 Jy
! Component: 1250  -  total flux cleaned = -0.000560762 Jy
! Component: 1300  -  total flux cleaned = -0.00057897 Jy
! Component: 1350  -  total flux cleaned = -0.000561154 Jy
! Component: 1400  -  total flux cleaned = -0.00056109 Jy
! Component: 1450  -  total flux cleaned = -0.000552446 Jy
! Component: 1500  -  total flux cleaned = -0.000535598 Jy
! Component: 1550  -  total flux cleaned = -0.000543968 Jy
! Component: 1600  -  total flux cleaned = -0.000527573 Jy
! Component: 1650  -  total flux cleaned = -0.000519443 Jy
! Component: 1700  -  total flux cleaned = -0.000503384 Jy
! Component: 1750  -  total flux cleaned = -0.000495591 Jy
! Component: 1800  -  total flux cleaned = -0.000472244 Jy
! Component: 1850  -  total flux cleaned = -0.000449224 Jy
! Component: 1900  -  total flux cleaned = -0.000449235 Jy
! Component: 1950  -  total flux cleaned = -0.000449121 Jy
! Component: 2000  -  total flux cleaned = -0.000441678 Jy
! Component: 2050  -  total flux cleaned = -0.000441732 Jy
! Component: 2100  -  total flux cleaned = -0.000419696 Jy
! Component: 2150  -  total flux cleaned = -0.000397919 Jy
! Component: 2200  -  total flux cleaned = -0.000390703 Jy
! Component: 2250  -  total flux cleaned = -0.000362109 Jy
! Component: 2300  -  total flux cleaned = -0.000333782 Jy
! Component: 2350  -  total flux cleaned = -0.000319737 Jy
! Component: 2400  -  total flux cleaned = -0.000305757 Jy
! Component: 2450  -  total flux cleaned = -0.000291867 Jy
! Component: 2500  -  total flux cleaned = -0.000278061 Jy
! Component: 2550  -  total flux cleaned = -0.000284942 Jy
! Component: 2600  -  total flux cleaned = -0.0002644 Jy
! Component: 2650  -  total flux cleaned = -0.000278048 Jy
! Component: 2700  -  total flux cleaned = -0.000284853 Jy
! Component: 2750  -  total flux cleaned = -0.000278081 Jy
! Component: 2800  -  total flux cleaned = -0.000291526 Jy
! Component: 2850  -  total flux cleaned = -0.000278143 Jy
! Component: 2900  -  total flux cleaned = -0.000298212 Jy
! Component: 2950  -  total flux cleaned = -0.000278221 Jy
! Component: 3000  -  total flux cleaned = -0.000291538 Jy
! Component: 3050  -  total flux cleaned = -0.000304795 Jy
! Component: 3100  -  total flux cleaned = -0.000311371 Jy
! Component: 3150  -  total flux cleaned = -0.000317972 Jy
! Component: 3200  -  total flux cleaned = -0.0003048 Jy
! Component: 3250  -  total flux cleaned = -0.000298241 Jy
! Component: 3300  -  total flux cleaned = -0.000304809 Jy
! Component: 3350  -  total flux cleaned = -0.000298248 Jy
! Component: 3400  -  total flux cleaned = -0.000298251 Jy
! Component: 3450  -  total flux cleaned = -0.00029169 Jy
! Component: 3500  -  total flux cleaned = -0.000291702 Jy
! Component: 3550  -  total flux cleaned = -0.000285183 Jy
! Component: 3600  -  total flux cleaned = -0.000285141 Jy
! Component: 3650  -  total flux cleaned = -0.000265462 Jy
! Component: 3700  -  total flux cleaned = -0.000272038 Jy
! Component: 3750  -  total flux cleaned = -0.000272055 Jy
! Component: 3800  -  total flux cleaned = -0.000272016 Jy
! Component: 3850  -  total flux cleaned = -0.000265482 Jy
! Component: 3900  -  total flux cleaned = -0.000265511 Jy
! Component: 3950  -  total flux cleaned = -0.000272066 Jy
! Component: 4000  -  total flux cleaned = -0.000285202 Jy
! Component: 4050  -  total flux cleaned = -0.000271918 Jy
! Total flux subtracted in 4096 components = -0.000285139 Jy
! Clean residual min=-0.000382 max=0.000387 Jy/beam
! Clean residual mean=0.000003 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.0668101 Jy
keep
! Adding 274 model components to the UV plane model.
! The established model now contains 457 components and 0.0668101 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0359-0310_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.349 x 15.43 at -9.282 degrees (North through East)
! Clean map  min=-0.0011418  max=0.046287 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0359-0310_S_b_map.fits
wmodel /vlbi/uf001/uva//J0359-0310_S_b_map.mod
! Writing 457 model components to file: /vlbi/uf001/uva//J0359-0310_S_b_map.mod
wobs   /vlbi/uf001/uva//J0359-0310_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0359-0310_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J0359-0310_S_b_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0359-0310_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0462868 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000134542 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.872009 0.872009 1.74402 3.48804 6.97607 13.9521 27.9043 55.8086
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.046 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  344.033 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0359-0310_S_b_dfm.log closed on Sun Jan 13 21:59:31 2019