! Started logfile: /vlbi/uf001/uva//J0359+6005_X_dfm.log on Sun Jan 13 21:59:13 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0359+6005_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0359+6005_X_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.853968 visibilities/baseline/integration-bin. ! Found source: J0359+6005 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 25824 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0359+6005_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.181151Jy sigma=21.574569 ! Fit after self-cal, rms=0.413122Jy sigma=7.609385 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7412 mas, bmaj=0.9699 mas, bpa=-6.571 degrees ! Estimated noise=0.4813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.453273 Jy ! Component: 100 - total flux cleaned = 0.567211 Jy ! Total flux subtracted in 100 components = 0.567211 Jy ! Clean residual min=-0.020500 max=0.045888 Jy/beam ! Clean residual mean=0.000072 rms=0.004038 Jy/beam ! Combined flux in latest and established models = 0.567211 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.567211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141762Jy sigma=2.418670 ! Fit after self-cal, rms=0.141708Jy sigma=2.417691 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0473254 Jy ! Component: 100 - total flux cleaned = 0.0691594 Jy ! Total flux subtracted in 100 components = 0.0691594 Jy ! Clean residual min=-0.019960 max=0.024527 Jy/beam ! Clean residual mean=0.000080 rms=0.003379 Jy/beam ! Combined flux in latest and established models = 0.63637 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 7 components and 0.63637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121204Jy sigma=2.075129 ! Fit after self-cal, rms=0.121162Jy sigma=2.074370 ! Inverting map ! Added new window around map position (-1.8, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199397 Jy ! Component: 100 - total flux cleaned = 0.0253504 Jy ! Total flux subtracted in 100 components = 0.0253504 Jy ! Clean residual min=-0.018538 max=0.024259 Jy/beam ! Clean residual mean=0.000081 rms=0.003251 Jy/beam ! Combined flux in latest and established models = 0.661721 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.661721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116959Jy sigma=2.015112 ! Fit after self-cal, rms=0.116652Jy sigma=2.007269 ! Inverting map ! Added new window around map position (-1, -11). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195407 Jy ! Component: 100 - total flux cleaned = 0.0285659 Jy ! Total flux subtracted in 100 components = 0.0285659 Jy ! Clean residual min=-0.016953 max=0.019763 Jy/beam ! Clean residual mean=0.000074 rms=0.003100 Jy/beam ! Combined flux in latest and established models = 0.690287 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.690287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111892Jy sigma=1.929144 ! Fit after self-cal, rms=0.111732Jy sigma=1.925082 ! Inverting map ! Added new window around map position (-0.8, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161884 Jy ! Component: 100 - total flux cleaned = 0.0214964 Jy ! Total flux subtracted in 100 components = 0.0214964 Jy ! Clean residual min=-0.015550 max=0.018097 Jy/beam ! Clean residual mean=0.000074 rms=0.002979 Jy/beam ! Combined flux in latest and established models = 0.711783 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.711783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108883Jy sigma=1.883676 ! Fit after self-cal, rms=0.108720Jy sigma=1.880314 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9538 mas, bmaj=1.206 mas, bpa=-1.554 degrees ! Estimated noise=0.265355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -13.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258414 Jy ! Component: 100 - total flux cleaned = 0.0414474 Jy ! Component: 150 - total flux cleaned = 0.0532135 Jy ! Component: 200 - total flux cleaned = 0.0626701 Jy ! Total flux subtracted in 200 components = 0.0626701 Jy ! Clean residual min=-0.014139 max=0.025343 Jy/beam ! Clean residual mean=0.000197 rms=0.003419 Jy/beam ! Combined flux in latest and established models = 0.774453 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 58 components and 0.774453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100677Jy sigma=1.750946 ! Fit after self-cal, rms=0.100301Jy sigma=1.741581 ! Inverting map ! Added new window around map position (0.6, -17.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.025201 Jy ! Component: 100 - total flux cleaned = 0.041129 Jy ! Component: 150 - total flux cleaned = 0.0527055 Jy ! Component: 200 - total flux cleaned = 0.0621425 Jy ! Total flux subtracted in 200 components = 0.0621425 Jy ! Clean residual min=-0.013070 max=0.016280 Jy/beam ! Clean residual mean=0.000119 rms=0.002782 Jy/beam ! Combined flux in latest and established models = 0.836596 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 110 components and 0.836596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091976Jy sigma=1.599443 ! Fit after self-cal, rms=0.091475Jy sigma=1.589189 ! Inverting map ! Added new window around map position (0.8, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144699 Jy ! Component: 100 - total flux cleaned = 0.0235919 Jy ! Component: 150 - total flux cleaned = 0.0312529 Jy ! Component: 200 - total flux cleaned = 0.0369698 Jy ! Total flux subtracted in 200 components = 0.0369698 Jy ! Clean residual min=-0.013001 max=0.014173 Jy/beam ! Clean residual mean=0.000101 rms=0.002572 Jy/beam ! Combined flux in latest and established models = 0.873566 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 127 components and 0.873566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088103Jy sigma=1.536812 ! Fit after self-cal, rms=0.087949Jy sigma=1.533815 ! Inverting map ! Added new window around map position (1.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123309 Jy ! Component: 100 - total flux cleaned = 0.0164567 Jy ! Component: 150 - total flux cleaned = 0.018827 Jy ! Component: 200 - total flux cleaned = 0.0210188 Jy ! Total flux subtracted in 200 components = 0.0210188 Jy ! Clean residual min=-0.012700 max=0.012340 Jy/beam ! Clean residual mean=0.000096 rms=0.002446 Jy/beam ! Combined flux in latest and established models = 0.894584 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 146 components and 0.894585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085550Jy sigma=1.491704 ! Fit after self-cal, rms=0.085362Jy sigma=1.488418 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9538 x 1.206 at -1.554 degrees (North through East) ! Clean map min=-0.011408 max=0.58873 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.03 KP 1.01 ! LA 1.01 MK 1.02 NL 1.08 OV 0.92 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.01 KP 1.01 ! LA 1.00 MK 1.02 NL 1.08 OV 0.93 ! PT 0.94 SC 0.93 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.01 KP 1.01 ! LA 1.00 MK 1.02 NL 1.08 OV 0.93 ! PT 0.95 SC 0.94 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.01 KP 1.01 ! LA 1.01 MK 1.03 NL 1.07 OV 0.93 ! PT 0.95 SC 0.93 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.02 KP 1.01 ! LA 1.02 MK 1.02 NL 1.08 OV 0.93 ! PT 0.95 SC 0.94 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.03 KP 1.00 ! LA 1.00 MK 1.02 NL 1.09 OV 0.93 ! PT 0.95 SC 0.94 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.02 KP 1.01 ! LA 1.01 MK 1.02 NL 1.08 OV 0.92 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.02 KP 1.01 ! LA 1.01 MK 1.03 NL 1.09 OV 0.92 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 1.03 KP 1.00 ! LA 1.01 MK 1.02 NL 1.09 OV 0.93 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.03 KP 1.02 ! LA 1.00 MK 1.02 NL 1.08 OV 0.92 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 1.03 KP 1.01 ! LA 1.00 MK 1.02 NL 1.09 OV 0.93 ! PT 0.96 SC 0.94 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.04 KP 1.01 ! LA 1.01 MK 1.03 NL 1.09 OV 0.92 ! PT 0.95 SC 0.94 ! ! ! Fit before self-cal, rms=0.085362Jy sigma=1.488418 ! Fit after self-cal, rms=0.076048Jy sigma=1.295024 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9506 mas, bmaj=1.204 mas, bpa=-0.3043 degrees ! Estimated noise=0.266824 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00423062 Jy ! Component: 100 - total flux cleaned = -0.00529686 Jy ! Component: 150 - total flux cleaned = -0.00577433 Jy ! Component: 200 - total flux cleaned = -0.00598959 Jy ! Total flux subtracted in 200 components = -0.00598959 Jy ! Clean residual min=-0.007818 max=0.008383 Jy/beam ! Clean residual mean=0.000073 rms=0.001727 Jy/beam ! Combined flux in latest and established models = 0.888595 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 173 components and 0.888595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074342Jy sigma=1.263987 ! Fit after self-cal, rms=0.074311Jy sigma=1.262962 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074311Jy sigma=1.262962 ! Fit after self-cal, rms=0.064918Jy sigma=1.098296 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9533 mas, bmaj=1.203 mas, bpa=-0.2082 degrees ! Estimated noise=0.267009 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00346676 Jy ! Component: 100 - total flux cleaned = -0.00326171 Jy ! Component: 150 - total flux cleaned = -0.00291574 Jy ! Component: 200 - total flux cleaned = -0.00275745 Jy ! Total flux subtracted in 200 components = -0.00275745 Jy ! Clean residual min=-0.004842 max=0.005085 Jy/beam ! Clean residual mean=0.000027 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.885837 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 189 components and 0.885837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063703Jy sigma=1.075202 ! Fit after self-cal, rms=0.063665Jy sigma=1.073956 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.4, -44.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252147 Jy ! Component: 100 - total flux cleaned = 0.0035399 Jy ! Component: 150 - total flux cleaned = 0.00472006 Jy ! Component: 200 - total flux cleaned = 0.00568004 Jy ! Total flux subtracted in 200 components = 0.00568004 Jy ! Clean residual min=-0.004550 max=0.004035 Jy/beam ! Clean residual mean=0.000017 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.891518 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 209 components and 0.891517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063078Jy sigma=1.062316 ! Fit after self-cal, rms=0.063061Jy sigma=1.062049 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063061Jy sigma=1.062049 ! Fit after self-cal, rms=0.062893Jy sigma=1.057804 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9529 mas, bmaj=1.203 mas, bpa=-0.2072 degrees ! Estimated noise=0.266625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00384754 Jy ! Component: 100 - total flux cleaned = -0.00452844 Jy ! Component: 150 - total flux cleaned = -0.00428391 Jy ! Component: 200 - total flux cleaned = -0.00428305 Jy ! Total flux subtracted in 200 components = -0.00428305 Jy ! Clean residual min=-0.003876 max=0.003996 Jy/beam ! Clean residual mean=0.000020 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.887234 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 216 components and 0.887234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062366Jy sigma=1.047944 ! Fit after self-cal, rms=0.062359Jy sigma=1.047776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00368237 Jy ! Component: 100 - total flux cleaned = 0.00445247 Jy ! Component: 150 - total flux cleaned = 0.00516505 Jy ! Component: 200 - total flux cleaned = 0.00602861 Jy ! Total flux subtracted in 200 components = 0.00602861 Jy ! Clean residual min=-0.003583 max=0.003243 Jy/beam ! Clean residual mean=0.000014 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.893263 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 233 components and 0.893263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061989Jy sigma=1.040547 ! Fit after self-cal, rms=0.061982Jy sigma=1.040423 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061982Jy sigma=1.040423 ! Fit after self-cal, rms=0.061887Jy sigma=1.038347 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.209 mas, bmaj=2.333 mas, bpa=25.42 degrees ! Estimated noise=0.358052 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021436 Jy ! Component: 100 - total flux cleaned = 0.000796679 Jy ! Component: 150 - total flux cleaned = 0.00126631 Jy ! Component: 200 - total flux cleaned = 0.0018807 Jy ! Total flux subtracted in 200 components = 0.0018807 Jy ! Clean residual min=-0.003754 max=0.003651 Jy/beam ! Clean residual mean=0.000025 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.895144 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 256 components and 0.895144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061666Jy sigma=1.033628 ! Fit after self-cal, rms=0.061651Jy sigma=1.033339 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000541696 Jy ! Component: 100 - total flux cleaned = 0.00114925 Jy ! Component: 150 - total flux cleaned = 0.00168627 Jy ! Component: 200 - total flux cleaned = 0.00215916 Jy ! Total flux subtracted in 200 components = 0.00215916 Jy ! Clean residual min=-0.003530 max=0.003240 Jy/beam ! Clean residual mean=0.000010 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.897303 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 266 components and 0.897303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061564Jy sigma=1.031784 ! Fit after self-cal, rms=0.061555Jy sigma=1.031666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9527 mas, bmaj=1.203 mas, bpa=-0.2347 degrees ! Estimated noise=0.266321 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9527 x 1.203 at -0.2347 degrees (North through East) ! Clean map min=-0.003623 max=0.59247 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061555Jy sigma=1.031666 ! Fit after self-cal, rms=0.058383Jy sigma=0.963634 ! Inverting map and beam ! Estimated beam: bmin=0.9531 mas, bmaj=1.203 mas, bpa=-0.2411 degrees ! Estimated noise=0.266225 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00327272 Jy ! Component: 100 - total flux cleaned = -0.00437661 Jy ! Component: 150 - total flux cleaned = -0.00463951 Jy ! Component: 200 - total flux cleaned = -0.00463912 Jy ! Total flux subtracted in 200 components = -0.00463912 Jy ! Clean residual min=-0.003089 max=0.002693 Jy/beam ! Clean residual mean=0.000009 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.892664 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 274 components and 0.892664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058057Jy sigma=0.957754 ! Fit after self-cal, rms=0.058053Jy sigma=0.957640 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.36284e-05 Jy ! Component: 100 - total flux cleaned = 7.65617e-05 Jy ! Component: 150 - total flux cleaned = 0.00014731 Jy ! Component: 200 - total flux cleaned = 0.000283824 Jy ! Total flux subtracted in 200 components = 0.000283824 Jy ! Clean residual min=-0.002995 max=0.002651 Jy/beam ! Clean residual mean=0.000007 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.892948 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 289 components and 0.892948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057893Jy sigma=0.954642 ! Fit after self-cal, rms=0.057891Jy sigma=0.954586 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057891Jy sigma=0.954586 ! Fit after self-cal, rms=0.057876Jy sigma=0.953398 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7402 mas, bmaj=0.9626 mas, bpa=-5.343 degrees ! Estimated noise=0.47599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.45477 Jy ! Component: 100 - total flux cleaned = 0.568347 Jy ! Component: 150 - total flux cleaned = 0.615776 Jy ! Component: 200 - total flux cleaned = 0.64346 Jy ! Total flux subtracted in 200 components = 0.64346 Jy ! Clean residual min=-0.008323 max=0.015515 Jy/beam ! Clean residual mean=0.000075 rms=0.001937 Jy/beam ! Combined flux in latest and established models = 0.64346 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.64346 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9528 mas, bmaj=1.204 mas, bpa=-0.1061 degrees ! Estimated noise=0.266037 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329109 Jy ! Component: 100 - total flux cleaned = 0.0581428 Jy ! Component: 150 - total flux cleaned = 0.0788109 Jy ! Component: 200 - total flux cleaned = 0.0961564 Jy ! Total flux subtracted in 200 components = 0.0961564 Jy ! Clean residual min=-0.006282 max=0.011642 Jy/beam ! Clean residual mean=0.000155 rms=0.001988 Jy/beam ! Combined flux in latest and established models = 0.739616 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 56 components and 0.739617 Jy ! Inverting map ! Added new window around map position (-1, -15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150626 Jy ! Component: 100 - total flux cleaned = 0.0281121 Jy ! Component: 150 - total flux cleaned = 0.0395987 Jy ! Component: 200 - total flux cleaned = 0.0497679 Jy ! Total flux subtracted in 200 components = 0.0497679 Jy ! Clean residual min=-0.004784 max=0.008316 Jy/beam ! Clean residual mean=0.000103 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.789384 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 106 components and 0.789384 Jy ! Inverting map ! Added new window around map position (-0.8, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00945315 Jy ! Component: 100 - total flux cleaned = 0.0175787 Jy ! Component: 150 - total flux cleaned = 0.0249017 Jy ! Component: 200 - total flux cleaned = 0.031556 Jy ! Total flux subtracted in 200 components = 0.031556 Jy ! Clean residual min=-0.004239 max=0.004915 Jy/beam ! Clean residual mean=0.000076 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.82094 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 139 components and 0.82094 Jy ! Inverting map ! Added new window around map position (0.8, -19.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00619141 Jy ! Component: 100 - total flux cleaned = 0.0117759 Jy ! Component: 150 - total flux cleaned = 0.0168795 Jy ! Component: 200 - total flux cleaned = 0.02156 Jy ! Total flux subtracted in 200 components = 0.02156 Jy ! Clean residual min=-0.003722 max=0.003668 Jy/beam ! Clean residual mean=0.000056 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.8425 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 164 components and 0.842501 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.212 mas, bmaj=2.337 mas, bpa=25.85 degrees ! Estimated noise=0.357201 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00915548 Jy ! Component: 100 - total flux cleaned = 0.0161153 Jy ! Component: 150 - total flux cleaned = 0.0217369 Jy ! Component: 200 - total flux cleaned = 0.0263809 Jy ! Total flux subtracted in 200 components = 0.0263809 Jy ! Clean residual min=-0.003372 max=0.003515 Jy/beam ! Clean residual mean=0.000062 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.868881 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00390634 Jy ! Component: 100 - total flux cleaned = 0.00726546 Jy ! Component: 150 - total flux cleaned = 0.0101716 Jy ! Component: 200 - total flux cleaned = 0.0126935 Jy ! Total flux subtracted in 200 components = 0.0126935 Jy ! Clean residual min=-0.003133 max=0.002964 Jy/beam ! Clean residual mean=0.000032 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.881575 Jy ! Adding 132 model components to the UV plane model. ! The established model now contains 257 components and 0.881575 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9528 mas, bmaj=1.204 mas, bpa=-0.1061 degrees ! Estimated noise=0.266037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189963 Jy ! Component: 100 - total flux cleaned = 0.0024115 Jy ! Component: 150 - total flux cleaned = 0.00296221 Jy ! Component: 200 - total flux cleaned = 0.00338947 Jy ! Total flux subtracted in 200 components = 0.00338947 Jy ! Clean residual min=-0.003100 max=0.002898 Jy/beam ! Clean residual mean=0.000012 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.884964 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 283 components and 0.884964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057692Jy sigma=0.950027 ! Fit after self-cal, rms=0.057554Jy sigma=0.947710 wmodel J0359+6005_X_map.mod ! Writing 283 model components to file: J0359+6005_X_map.mod wobs J0359+6005_X_uvs.fits ! Writing UV FITS file: J0359+6005_X_uvs.fits wwins J0359+6005_X_map.win ! wwins: Wrote 13 windows to J0359+6005_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000508361 Jy ! Component: 100 - total flux cleaned = -0.00120769 Jy ! Component: 150 - total flux cleaned = -0.00177761 Jy ! Component: 200 - total flux cleaned = -0.00223979 Jy ! Component: 250 - total flux cleaned = -0.00268651 Jy ! Component: 300 - total flux cleaned = -0.00311935 Jy ! Component: 350 - total flux cleaned = -0.00350214 Jy ! Component: 400 - total flux cleaned = -0.0038382 Jy ! Component: 450 - total flux cleaned = -0.00412948 Jy ! Component: 500 - total flux cleaned = -0.00437894 Jy ! Component: 550 - total flux cleaned = -0.00465872 Jy ! Component: 600 - total flux cleaned = -0.00493284 Jy ! Component: 650 - total flux cleaned = -0.00523516 Jy ! Component: 700 - total flux cleaned = -0.00546682 Jy ! Component: 750 - total flux cleaned = -0.005695 Jy ! Component: 800 - total flux cleaned = -0.00595172 Jy ! Component: 850 - total flux cleaned = -0.0061726 Jy ! Component: 900 - total flux cleaned = -0.00632782 Jy ! Component: 950 - total flux cleaned = -0.0065428 Jy ! Component: 1000 - total flux cleaned = -0.00669446 Jy ! Component: 1050 - total flux cleaned = -0.00690416 Jy ! Component: 1100 - total flux cleaned = -0.00708118 Jy ! Component: 1150 - total flux cleaned = -0.00716877 Jy ! Component: 1200 - total flux cleaned = -0.00737035 Jy ! Component: 1250 - total flux cleaned = -0.00736994 Jy ! Component: 1300 - total flux cleaned = -0.00753898 Jy ! Component: 1350 - total flux cleaned = -0.00762191 Jy ! Component: 1400 - total flux cleaned = -0.00775979 Jy ! Component: 1450 - total flux cleaned = -0.00781418 Jy ! Component: 1500 - total flux cleaned = -0.00789506 Jy ! Component: 1550 - total flux cleaned = -0.00792221 Jy ! Component: 1600 - total flux cleaned = -0.0080542 Jy ! Component: 1650 - total flux cleaned = -0.00813247 Jy ! Component: 1700 - total flux cleaned = -0.00831306 Jy ! Component: 1750 - total flux cleaned = -0.0082617 Jy ! Component: 1800 - total flux cleaned = -0.00843918 Jy ! Component: 1850 - total flux cleaned = -0.00841365 Jy ! Component: 1900 - total flux cleaned = -0.00846301 Jy ! Component: 1950 - total flux cleaned = -0.00846295 Jy ! Component: 2000 - total flux cleaned = -0.00851179 Jy ! Component: 2050 - total flux cleaned = -0.00855992 Jy ! Component: 2100 - total flux cleaned = -0.00853624 Jy ! Component: 2150 - total flux cleaned = -0.00860763 Jy ! Component: 2200 - total flux cleaned = -0.0086316 Jy ! Component: 2250 - total flux cleaned = -0.0086785 Jy ! Component: 2300 - total flux cleaned = -0.00874798 Jy ! Component: 2350 - total flux cleaned = -0.0087248 Jy ! Component: 2400 - total flux cleaned = -0.008816 Jy ! Component: 2450 - total flux cleaned = -0.00881576 Jy ! Component: 2500 - total flux cleaned = -0.00872605 Jy ! Component: 2550 - total flux cleaned = -0.00874852 Jy ! Component: 2600 - total flux cleaned = -0.00885922 Jy ! Component: 2650 - total flux cleaned = -0.00883691 Jy ! Component: 2700 - total flux cleaned = -0.00881505 Jy ! Component: 2750 - total flux cleaned = -0.0089013 Jy ! Component: 2800 - total flux cleaned = -0.00896545 Jy ! Component: 2850 - total flux cleaned = -0.00896511 Jy ! Component: 2900 - total flux cleaned = -0.00888068 Jy ! Component: 2950 - total flux cleaned = -0.00902724 Jy ! Component: 3000 - total flux cleaned = -0.00904791 Jy ! Component: 3050 - total flux cleaned = -0.00910957 Jy ! Component: 3100 - total flux cleaned = -0.00913009 Jy ! Component: 3150 - total flux cleaned = -0.0091707 Jy ! Component: 3200 - total flux cleaned = -0.00919088 Jy ! Component: 3250 - total flux cleaned = -0.00925126 Jy ! Component: 3300 - total flux cleaned = -0.00921147 Jy ! Component: 3350 - total flux cleaned = -0.00919189 Jy ! Component: 3400 - total flux cleaned = -0.00925091 Jy ! Component: 3450 - total flux cleaned = -0.0093289 Jy ! Component: 3500 - total flux cleaned = -0.00928983 Jy ! Component: 3550 - total flux cleaned = -0.00938667 Jy ! Component: 3600 - total flux cleaned = -0.00936759 Jy ! Component: 3650 - total flux cleaned = -0.00940592 Jy ! Component: 3700 - total flux cleaned = -0.00940579 Jy ! Component: 3750 - total flux cleaned = -0.00946238 Jy ! Component: 3800 - total flux cleaned = -0.00953717 Jy ! Component: 3850 - total flux cleaned = -0.00951856 Jy ! Component: 3900 - total flux cleaned = -0.00955552 Jy ! Component: 3950 - total flux cleaned = -0.00955565 Jy ! Component: 4000 - total flux cleaned = -0.00962856 Jy ! Component: 4050 - total flux cleaned = -0.00964685 Jy ! Total flux subtracted in 4096 components = -0.00962863 Jy ! Clean residual min=-0.000900 max=0.000980 Jy/beam ! Clean residual mean=0.000001 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.875336 Jy keep ! Adding 334 model components to the UV plane model. ! The established model now contains 615 components and 0.875336 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0359+6005_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9528 x 1.204 at -0.1061 degrees (North through East) ! Clean map min=-0.0017625 max=0.59654 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0359+6005_X_map.fits wmodel /vlbi/uf001/uva//J0359+6005_X_map.mod ! Writing 615 model components to file: /vlbi/uf001/uva//J0359+6005_X_map.mod wobs /vlbi/uf001/uva//J0359+6005_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0359+6005_X_uvs.fits wwins /vlbi/uf001/uva//J0359+6005_X_map.win ! wwins: Wrote 14 windows to /vlbi/uf001/uva//J0359+6005_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.596539 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000303279 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.152519 0.152519 0.305038 0.610077 1.22015 2.44031 4.88061 9.76123 19.5225 39.0449 78.0898 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.596 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1966.96 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0359+6005_X_dfm.log closed on Sun Jan 13 21:59:20 2019