! Started logfile: /vlbi/uf001/uva//J0359+3220_S_dfm.log on Sun Jan 13 21:58:56 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0359+3220_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0359+3220_S_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.881614 visibilities/baseline/integration-bin.
! Found source: J0359+3220
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3999 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0359+3220_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 75 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 75 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 75 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.037151Jy  sigma=20.891060
! Fit after  self-cal, rms=0.745252Jy  sigma=15.242867
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.755 mas, bmaj=5.412 mas, bpa=-2.387 degrees
! Estimated noise=0.768435 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.193369 Jy
! Component: 100  -  total flux cleaned = 0.270186 Jy
! Total flux subtracted in 100 components = 0.270186 Jy
! Clean residual min=-0.016308 max=0.039210 Jy/beam
! Clean residual mean=-0.000009 rms=0.005300 Jy/beam
! Combined flux in latest and established models = 0.270186 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.270186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123739Jy  sigma=2.401163
! Fit after  self-cal, rms=0.123542Jy  sigma=2.397200
! Inverting map 
! Added new window around map position (-3.5, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.045954 Jy
! Component: 100  -  total flux cleaned = 0.0769754 Jy
! Total flux subtracted in 100 components = 0.0769754 Jy
! Clean residual min=-0.011819 max=0.028987 Jy/beam
! Clean residual mean=-0.000003 rms=0.003542 Jy/beam
! Combined flux in latest and established models = 0.347161 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 0.347161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094875Jy  sigma=1.829388
! Fit after  self-cal, rms=0.094463Jy  sigma=1.819885
! Inverting map 
! Added new window around map position (-7.5, -4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0272982 Jy
! Component: 100  -  total flux cleaned = 0.0453842 Jy
! Total flux subtracted in 100 components = 0.0453842 Jy
! Clean residual min=-0.009121 max=0.011265 Jy/beam
! Clean residual mean=0.000001 rms=0.002561 Jy/beam
! Combined flux in latest and established models = 0.392545 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 35 components and 0.392545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081647Jy  sigma=1.564614
! Fit after  self-cal, rms=0.081301Jy  sigma=1.556600
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.197 mas, bmaj=6.089 mas, bpa=-3.298 degrees
! Estimated noise=0.60845 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0224267 Jy
! Component: 100  -  total flux cleaned = 0.0377716 Jy
! Component: 150  -  total flux cleaned = 0.0488962 Jy
! Component: 200  -  total flux cleaned = 0.057372 Jy
! Total flux subtracted in 200 components = 0.057372 Jy
! Clean residual min=-0.008126 max=0.013224 Jy/beam
! Clean residual mean=0.000007 rms=0.002446 Jy/beam
! Combined flux in latest and established models = 0.449917 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 82 components and 0.449917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073056Jy  sigma=1.387972
! Fit after  self-cal, rms=0.072833Jy  sigma=1.382001
! Inverting map 
! Added new window around map position (-12.5, -5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126784 Jy
! Component: 100  -  total flux cleaned = 0.0198485 Jy
! Component: 150  -  total flux cleaned = 0.0254122 Jy
! Component: 200  -  total flux cleaned = 0.0298966 Jy
! Total flux subtracted in 200 components = 0.0298966 Jy
! Clean residual min=-0.006454 max=0.008571 Jy/beam
! Clean residual mean=0.000006 rms=0.001934 Jy/beam
! Combined flux in latest and established models = 0.479814 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 130 components and 0.479814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070209Jy  sigma=1.328032
! Fit after  self-cal, rms=0.069941Jy  sigma=1.322255
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.197 x 6.089 at -3.298 degrees (North through East)
! Clean map  min=-0.0063406  max=0.24977 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        0.96     HN        1.01     LA        0.90     
!   MK        1.04     NL        1.08     OV        1.03     PT        1.01     
!   SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     HN        0.99     LA        0.96     
!   MK        1.01     NL        1.07     OV        1.00     PT        1.02     
!   SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.00     LA        0.95     
!   MK        0.97     NL        1.11     OV        1.00     PT        1.04     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.069941Jy  sigma=1.322255
! Fit after  self-cal, rms=0.064180Jy  sigma=1.223074
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.216 mas, bmaj=6.114 mas, bpa=-3.349 degrees
! Estimated noise=0.60904 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164274 Jy
! Component: 100  -  total flux cleaned = 0.00163964 Jy
! Component: 150  -  total flux cleaned = 0.00172547 Jy
! Component: 200  -  total flux cleaned = 0.00187759 Jy
! Total flux subtracted in 200 components = 0.00187759 Jy
! Clean residual min=-0.004829 max=0.004983 Jy/beam
! Clean residual mean=0.000027 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.481691 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 158 components and 0.481691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063832Jy  sigma=1.216217
! Fit after  self-cal, rms=0.063821Jy  sigma=1.215368
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063821Jy  sigma=1.215368
! Fit after  self-cal, rms=0.062093Jy  sigma=1.163064
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.209 mas, bmaj=6.141 mas, bpa=-2.974 degrees
! Estimated noise=0.608733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123742 Jy
! Component: 100  -  total flux cleaned = 0.00190282 Jy
! Component: 150  -  total flux cleaned = 0.00214262 Jy
! Component: 200  -  total flux cleaned = 0.00239654 Jy
! Total flux subtracted in 200 components = 0.00239654 Jy
! Clean residual min=-0.002431 max=0.003205 Jy/beam
! Clean residual mean=-0.000001 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.484088 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 180 components and 0.484088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061933Jy  sigma=1.159798
! Fit after  self-cal, rms=0.061943Jy  sigma=1.159495
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-46, -21).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00246695 Jy
! Component: 100  -  total flux cleaned = 0.00268987 Jy
! Component: 150  -  total flux cleaned = 0.00307695 Jy
! Component: 200  -  total flux cleaned = 0.00333377 Jy
! Total flux subtracted in 200 components = 0.00333377 Jy
! Clean residual min=-0.002292 max=0.002522 Jy/beam
! Clean residual mean=-0.000001 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.487422 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 198 components and 0.487422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061804Jy  sigma=1.156598
! Fit after  self-cal, rms=0.061798Jy  sigma=1.156486
! Inverting map 
! Added new window around map position (16, 101.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000656033 Jy
! Component: 100  -  total flux cleaned = 0.00059588 Jy
! Component: 150  -  total flux cleaned = 0.000742792 Jy
! Component: 200  -  total flux cleaned = 0.000832183 Jy
! Total flux subtracted in 200 components = 0.000832183 Jy
! Clean residual min=-0.002210 max=0.002280 Jy/beam
! Clean residual mean=-0.000000 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.488254 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 214 components and 0.488254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061681Jy  sigma=1.154176
! Fit after  self-cal, rms=0.061677Jy  sigma=1.154088
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061677Jy  sigma=1.154088
! Fit after  self-cal, rms=0.061677Jy  sigma=1.153596
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.209 mas, bmaj=6.145 mas, bpa=-2.941 degrees
! Estimated noise=0.608425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000163314 Jy
! Component: 100  -  total flux cleaned = -2.96607e-05 Jy
! Component: 150  -  total flux cleaned = 1.10876e-05 Jy
! Component: 200  -  total flux cleaned = 0.000127021 Jy
! Total flux subtracted in 200 components = 0.000127021 Jy
! Clean residual min=-0.002110 max=0.002218 Jy/beam
! Clean residual mean=-0.000002 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.488381 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 228 components and 0.488381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061624Jy  sigma=1.152484
! Fit after  self-cal, rms=0.061623Jy  sigma=1.152461
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.74283e-06 Jy
! Component: 100  -  total flux cleaned = -1.92783e-06 Jy
! Component: 150  -  total flux cleaned = 6.60957e-05 Jy
! Component: 200  -  total flux cleaned = 6.57982e-05 Jy
! Total flux subtracted in 200 components = 6.57982e-05 Jy
! Clean residual min=-0.002066 max=0.002128 Jy/beam
! Clean residual mean=-0.000001 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.488447 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 243 components and 0.488447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061589Jy  sigma=1.151755
! Fit after  self-cal, rms=0.061588Jy  sigma=1.151745
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061588Jy  sigma=1.151745
! Fit after  self-cal, rms=0.061603Jy  sigma=1.151677
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.97 mas, bmaj=9.211 mas, bpa=-5.292 degrees
! Estimated noise=0.80059 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000351437 Jy
! Component: 100  -  total flux cleaned = 0.000450445 Jy
! Component: 150  -  total flux cleaned = 0.00052965 Jy
! Component: 200  -  total flux cleaned = 0.000597695 Jy
! Total flux subtracted in 200 components = 0.000597695 Jy
! Clean residual min=-0.002372 max=0.002136 Jy/beam
! Clean residual mean=-0.000003 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.489044 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 274 components and 0.489044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061587Jy  sigma=1.151439
! Fit after  self-cal, rms=0.061588Jy  sigma=1.151412
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.61355e-05 Jy
! Component: 100  -  total flux cleaned = 1.52227e-05 Jy
! Component: 150  -  total flux cleaned = 6.93927e-05 Jy
! Component: 200  -  total flux cleaned = 0.000117901 Jy
! Total flux subtracted in 200 components = 0.000117901 Jy
! Clean residual min=-0.002427 max=0.002123 Jy/beam
! Clean residual mean=-0.000003 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.489162 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 297 components and 0.489162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061582Jy  sigma=1.151319
! Fit after  self-cal, rms=0.061583Jy  sigma=1.151310
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.208 mas, bmaj=6.147 mas, bpa=-2.928 degrees
! Estimated noise=0.608374 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.208 x 6.147 at -2.928 degrees (North through East)
! Clean map  min=-0.002066  max=0.24909 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.762 mas, bmaj=5.471 mas, bpa=-2.009 degrees
! Estimated noise=0.771457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.193382 Jy
! Component: 100  -  total flux cleaned = 0.271275 Jy
! Component: 150  -  total flux cleaned = 0.318785 Jy
! Component: 200  -  total flux cleaned = 0.351567 Jy
! Total flux subtracted in 200 components = 0.351567 Jy
! Clean residual min=-0.009166 max=0.018198 Jy/beam
! Clean residual mean=-0.000004 rms=0.002939 Jy/beam
! Combined flux in latest and established models = 0.351567 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.351567 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.208 mas, bmaj=6.147 mas, bpa=-2.928 degrees
! Estimated noise=0.608374 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0331723 Jy
! Component: 100  -  total flux cleaned = 0.0563609 Jy
! Component: 150  -  total flux cleaned = 0.0730001 Jy
! Component: 200  -  total flux cleaned = 0.0851958 Jy
! Total flux subtracted in 200 components = 0.0851958 Jy
! Clean residual min=-0.004108 max=0.008517 Jy/beam
! Clean residual mean=-0.000003 rms=0.001501 Jy/beam
! Combined flux in latest and established models = 0.436763 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 64 components and 0.436763 Jy
! Inverting map 
! Added new window around map position (3.5, 1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00962789 Jy
! Component: 100  -  total flux cleaned = 0.0170234 Jy
! Component: 150  -  total flux cleaned = 0.0229078 Jy
! Component: 200  -  total flux cleaned = 0.0276715 Jy
! Total flux subtracted in 200 components = 0.0276715 Jy
! Clean residual min=-0.002843 max=0.003282 Jy/beam
! Clean residual mean=-0.000001 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.464434 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 108 components and 0.464434 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.97 mas, bmaj=9.211 mas, bpa=-5.292 degrees
! Estimated noise=0.80059 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00692875 Jy
! Component: 100  -  total flux cleaned = 0.011313 Jy
! Component: 150  -  total flux cleaned = 0.0145728 Jy
! Component: 200  -  total flux cleaned = 0.0171106 Jy
! Total flux subtracted in 200 components = 0.0171106 Jy
! Clean residual min=-0.002871 max=0.002456 Jy/beam
! Clean residual mean=0.000000 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.481545 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205018 Jy
! Component: 100  -  total flux cleaned = 0.00372008 Jy
! Component: 150  -  total flux cleaned = 0.00508823 Jy
! Component: 200  -  total flux cleaned = 0.00621512 Jy
! Total flux subtracted in 200 components = 0.00621512 Jy
! Clean residual min=-0.002624 max=0.002309 Jy/beam
! Clean residual mean=-0.000000 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.48776 Jy
! Adding 148 model components to the UV plane model.
! The established model now contains 241 components and 0.48776 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.208 mas, bmaj=6.147 mas, bpa=-2.928 degrees
! Estimated noise=0.608374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000395274 Jy
! Component: 100  -  total flux cleaned = -0.000527534 Jy
! Component: 150  -  total flux cleaned = -0.000468785 Jy
! Component: 200  -  total flux cleaned = -0.000250422 Jy
! Total flux subtracted in 200 components = -0.000250422 Jy
! Clean residual min=-0.002028 max=0.002369 Jy/beam
! Clean residual mean=-0.000001 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.48751 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 267 components and 0.48751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061744Jy  sigma=1.153977
! Fit after  self-cal, rms=0.061707Jy  sigma=1.153403
wmodel J0359+3220_S_map.mod
! Writing 267 model components to file: J0359+3220_S_map.mod
wobs   J0359+3220_S_uvs.fits
! Writing UV FITS file: J0359+3220_S_uvs.fits
wwins  J0359+3220_S_map.win
! wwins: Wrote 7 windows to J0359+3220_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000770402 Jy
! Component: 100  -  total flux cleaned = 0.000695919 Jy
! Component: 150  -  total flux cleaned = 0.000554086 Jy
! Component: 200  -  total flux cleaned = 0.000452612 Jy
! Component: 250  -  total flux cleaned = 0.00058472 Jy
! Component: 300  -  total flux cleaned = 0.000745057 Jy
! Component: 350  -  total flux cleaned = 0.000838607 Jy
! Component: 400  -  total flux cleaned = 0.000808487 Jy
! Component: 450  -  total flux cleaned = 0.000868272 Jy
! Component: 500  -  total flux cleaned = 0.000867884 Jy
! Component: 550  -  total flux cleaned = 0.000867267 Jy
! Component: 600  -  total flux cleaned = 0.000838302 Jy
! Component: 650  -  total flux cleaned = 0.000782639 Jy
! Component: 700  -  total flux cleaned = 0.000728148 Jy
! Component: 750  -  total flux cleaned = 0.000621321 Jy
! Component: 800  -  total flux cleaned = 0.000595539 Jy
! Component: 850  -  total flux cleaned = 0.000647407 Jy
! Component: 900  -  total flux cleaned = 0.000595917 Jy
! Component: 950  -  total flux cleaned = 0.000469849 Jy
! Component: 1000  -  total flux cleaned = 0.000469844 Jy
! Component: 1050  -  total flux cleaned = 0.000371926 Jy
! Component: 1100  -  total flux cleaned = 0.000420691 Jy
! Component: 1150  -  total flux cleaned = 0.000420288 Jy
! Component: 1200  -  total flux cleaned = 0.000349783 Jy
! Component: 1250  -  total flux cleaned = 0.000373869 Jy
! Component: 1300  -  total flux cleaned = 0.000374175 Jy
! Component: 1350  -  total flux cleaned = 0.000464768 Jy
! Component: 1400  -  total flux cleaned = 0.000419793 Jy
! Component: 1450  -  total flux cleaned = 0.000419725 Jy
! Component: 1500  -  total flux cleaned = 0.000441653 Jy
! Component: 1550  -  total flux cleaned = 0.000441914 Jy
! Component: 1600  -  total flux cleaned = 0.000527915 Jy
! Component: 1650  -  total flux cleaned = 0.000570225 Jy
! Component: 1700  -  total flux cleaned = 0.0005704 Jy
! Component: 1750  -  total flux cleaned = 0.000570355 Jy
! Component: 1800  -  total flux cleaned = 0.000714632 Jy
! Component: 1850  -  total flux cleaned = 0.000652871 Jy
! Component: 1900  -  total flux cleaned = 0.000693105 Jy
! Component: 1950  -  total flux cleaned = 0.000652977 Jy
! Component: 2000  -  total flux cleaned = 0.000613072 Jy
! Component: 2050  -  total flux cleaned = 0.000593691 Jy
! Component: 2100  -  total flux cleaned = 0.000515947 Jy
! Component: 2150  -  total flux cleaned = 0.000573846 Jy
! Component: 2200  -  total flux cleaned = 0.000497449 Jy
! Component: 2250  -  total flux cleaned = 0.00055446 Jy
! Component: 2300  -  total flux cleaned = 0.000460536 Jy
! Component: 2350  -  total flux cleaned = 0.000497713 Jy
! Component: 2400  -  total flux cleaned = 0.000497676 Jy
! Component: 2450  -  total flux cleaned = 0.000552525 Jy
! Component: 2500  -  total flux cleaned = 0.000498192 Jy
! Component: 2550  -  total flux cleaned = 0.000516526 Jy
! Component: 2600  -  total flux cleaned = 0.00051647 Jy
! Component: 2650  -  total flux cleaned = 0.000551851 Jy
! Component: 2700  -  total flux cleaned = 0.000534126 Jy
! Component: 2750  -  total flux cleaned = 0.000568774 Jy
! Component: 2800  -  total flux cleaned = 0.000586188 Jy
! Component: 2850  -  total flux cleaned = 0.00053484 Jy
! Component: 2900  -  total flux cleaned = 0.000585951 Jy
! Component: 2950  -  total flux cleaned = 0.000552339 Jy
! Component: 3000  -  total flux cleaned = 0.00060259 Jy
! Component: 3050  -  total flux cleaned = 0.000586273 Jy
! Component: 3100  -  total flux cleaned = 0.000619242 Jy
! Component: 3150  -  total flux cleaned = 0.000684645 Jy
! Component: 3200  -  total flux cleaned = 0.000635896 Jy
! Component: 3250  -  total flux cleaned = 0.000651909 Jy
! Component: 3300  -  total flux cleaned = 0.000652175 Jy
! Component: 3350  -  total flux cleaned = 0.000652013 Jy
! Component: 3400  -  total flux cleaned = 0.000636118 Jy
! Component: 3450  -  total flux cleaned = 0.000589097 Jy
! Component: 3500  -  total flux cleaned = 0.00062019 Jy
! Component: 3550  -  total flux cleaned = 0.000682041 Jy
! Component: 3600  -  total flux cleaned = 0.000666728 Jy
! Component: 3650  -  total flux cleaned = 0.000666652 Jy
! Component: 3700  -  total flux cleaned = 0.000712359 Jy
! Component: 3750  -  total flux cleaned = 0.000637025 Jy
! Component: 3800  -  total flux cleaned = 0.000711912 Jy
! Component: 3850  -  total flux cleaned = 0.000711731 Jy
! Component: 3900  -  total flux cleaned = 0.000711735 Jy
! Component: 3950  -  total flux cleaned = 0.000667607 Jy
! Component: 4000  -  total flux cleaned = 0.000740661 Jy
! Component: 4050  -  total flux cleaned = 0.000740636 Jy
! Total flux subtracted in 4096 components = 0.000740647 Jy
! Clean residual min=-0.001060 max=0.001142 Jy/beam
! Clean residual mean=-0.000000 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.48825 Jy
keep
! Adding 289 model components to the UV plane model.
! The established model now contains 555 components and 0.48825 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0359+3220_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.208 x 6.147 at -2.928 degrees (North through East)
! Clean map  min=-0.0015686  max=0.24882 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0359+3220_S_map.fits
wmodel /vlbi/uf001/uva//J0359+3220_S_map.mod
! Writing 555 model components to file: /vlbi/uf001/uva//J0359+3220_S_map.mod
wobs   /vlbi/uf001/uva//J0359+3220_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0359+3220_S_uvs.fits
wwins  /vlbi/uf001/uva//J0359+3220_S_map.win
! wwins: Wrote 8 windows to /vlbi/uf001/uva//J0359+3220_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.248816 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000258921 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.312184 0.312184 0.624368 1.24874 2.49747 4.99494 9.98989 19.9798 39.9595 79.9191
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.248 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  960.971 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0359+3220_S_dfm.log closed on Sun Jan 13 21:59:00 2019