! Started logfile: /vlbi/uf001/uva//J0359+2758_S_dfm.log on Sun Jan 13 21:58:46 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0359+2758_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0359+2758_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.856085 visibilities/baseline/integration-bin.
! Found source: J0359+2758
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4854 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0359+2758_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009144Jy  sigma=22.064222
! Fit after  self-cal, rms=0.906849Jy  sigma=19.869968
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.708 mas, bmaj=5.475 mas, bpa=-3.701 degrees
! Estimated noise=0.670703 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0729657 Jy
! Component: 100  -  total flux cleaned = 0.089071 Jy
! Total flux subtracted in 100 components = 0.089071 Jy
! Clean residual min=-0.004023 max=0.005177 Jy/beam
! Clean residual mean=-0.000011 rms=0.001004 Jy/beam
! Combined flux in latest and established models = 0.089071 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.089071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058058Jy  sigma=1.223355
! Fit after  self-cal, rms=0.058044Jy  sigma=1.223079
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.165 mas, bmaj=6.216 mas, bpa=-3.825 degrees
! Estimated noise=0.530364 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00576376 Jy
! Component: 100  -  total flux cleaned = 0.00844989 Jy
! Component: 150  -  total flux cleaned = 0.00993903 Jy
! Component: 200  -  total flux cleaned = 0.0107957 Jy
! Total flux subtracted in 200 components = 0.0107957 Jy
! Clean residual min=-0.002984 max=0.003246 Jy/beam
! Clean residual mean=-0.000008 rms=0.000781 Jy/beam
! Combined flux in latest and established models = 0.0998667 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 27 components and 0.0998667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057497Jy  sigma=1.211352
! Fit after  self-cal, rms=0.057484Jy  sigma=1.211094
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.165 x 6.216 at -3.825 degrees (North through East)
! Clean map  min=-0.0028834  max=0.094529 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.90     MK        1.01     NL        1.06     OV        0.97     
!   PT        1.00*    SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.02     KP        1.00     
!   LA        0.94     MK        1.00     NL        1.14     OV        0.96     
!   PT        1.00*    SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        0.99     KP        0.98     
!   LA        0.92     MK        0.98     NL        1.22     OV        0.95     
!   PT        1.00*    SC        0.98     
! 
! 
! Fit before self-cal, rms=0.057484Jy  sigma=1.211094
! Fit after  self-cal, rms=0.057103Jy  sigma=1.200018
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.161 mas, bmaj=6.236 mas, bpa=-3.629 degrees
! Estimated noise=0.529633 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.06488e-05 Jy
! Component: 100  -  total flux cleaned = 6.81283e-05 Jy
! Component: 150  -  total flux cleaned = 0.000107105 Jy
! Component: 200  -  total flux cleaned = 0.000141621 Jy
! Total flux subtracted in 200 components = 0.000141621 Jy
! Clean residual min=-0.002788 max=0.002539 Jy/beam
! Clean residual mean=-0.000004 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 0.100008 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 35 components and 0.100008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057085Jy  sigma=1.199581
! Fit after  self-cal, rms=0.057099Jy  sigma=1.199276
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057099Jy  sigma=1.199276
! Fit after  self-cal, rms=0.057302Jy  sigma=1.192403
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.153 mas, bmaj=6.248 mas, bpa=-3.756 degrees
! Estimated noise=0.529899 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000255151 Jy
! Component: 100  -  total flux cleaned = 0.000416763 Jy
! Component: 150  -  total flux cleaned = 0.000485869 Jy
! Component: 200  -  total flux cleaned = 0.000563765 Jy
! Total flux subtracted in 200 components = 0.000563765 Jy
! Clean residual min=-0.002266 max=0.002409 Jy/beam
! Clean residual mean=-0.000002 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.100572 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 41 components and 0.100572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057290Jy  sigma=1.192072
! Fit after  self-cal, rms=0.057301Jy  sigma=1.191925
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.9082e-05 Jy
! Component: 100  -  total flux cleaned = 0.000173654 Jy
! Component: 150  -  total flux cleaned = 0.000223201 Jy
! Component: 200  -  total flux cleaned = 0.000267913 Jy
! Total flux subtracted in 200 components = 0.000267913 Jy
! Clean residual min=-0.002264 max=0.002391 Jy/beam
! Clean residual mean=-0.000002 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.10084 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 41 components and 0.10084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057294Jy  sigma=1.191767
! Fit after  self-cal, rms=0.057293Jy  sigma=1.191742
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057293Jy  sigma=1.191742
! Fit after  self-cal, rms=0.057327Jy  sigma=1.191660
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.144 mas, bmaj=6.248 mas, bpa=-3.811 degrees
! Estimated noise=0.529577 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000227837 Jy
! Component: 100  -  total flux cleaned = 0.00033422 Jy
! Component: 150  -  total flux cleaned = 0.000399703 Jy
! Component: 200  -  total flux cleaned = 0.000458615 Jy
! Total flux subtracted in 200 components = 0.000458615 Jy
! Clean residual min=-0.002239 max=0.002384 Jy/beam
! Clean residual mean=-0.000002 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 0.101299 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 43 components and 0.101299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057321Jy  sigma=1.191488
! Fit after  self-cal, rms=0.057322Jy  sigma=1.191476
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.31778e-05 Jy
! Component: 100  -  total flux cleaned = 9.4828e-05 Jy
! Component: 150  -  total flux cleaned = 0.000150441 Jy
! Component: 200  -  total flux cleaned = 0.000183887 Jy
! Total flux subtracted in 200 components = 0.000183887 Jy
! Clean residual min=-0.002239 max=0.002370 Jy/beam
! Clean residual mean=-0.000002 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.101483 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 45 components and 0.101483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057319Jy  sigma=1.191399
! Fit after  self-cal, rms=0.057318Jy  sigma=1.191392
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057318Jy  sigma=1.191392
! Fit after  self-cal, rms=0.057319Jy  sigma=1.191347
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.574 mas, bmaj=8.921 mas, bpa=-2.622 degrees
! Estimated noise=0.711688 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000730106 Jy
! Component: 100  -  total flux cleaned = 0.000755374 Jy
! Component: 150  -  total flux cleaned = 0.000754894 Jy
! Component: 200  -  total flux cleaned = 0.000762982 Jy
! Total flux subtracted in 200 components = 0.000762982 Jy
! Clean residual min=-0.002296 max=0.002552 Jy/beam
! Clean residual mean=-0.000002 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.102246 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 49 components and 0.102246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057319Jy  sigma=1.191412
! Fit after  self-cal, rms=0.057317Jy  sigma=1.191351
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.35556e-05 Jy
! Component: 100  -  total flux cleaned = 2.38441e-05 Jy
! Component: 150  -  total flux cleaned = 3.13082e-05 Jy
! Component: 200  -  total flux cleaned = 3.09185e-05 Jy
! Total flux subtracted in 200 components = 3.09185e-05 Jy
! Clean residual min=-0.002292 max=0.002544 Jy/beam
! Clean residual mean=-0.000002 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.102276 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 50 components and 0.102276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057319Jy  sigma=1.191370
! Fit after  self-cal, rms=0.057317Jy  sigma=1.191338
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.136 mas, bmaj=6.246 mas, bpa=-3.843 degrees
! Estimated noise=0.529354 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.136 x 6.246 at -3.843 degrees (North through East)
! Clean map  min=-0.0020958  max=0.094033 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.683 mas, bmaj=5.504 mas, bpa=-3.722 degrees
! Estimated noise=0.666821 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0725086 Jy
! Component: 100  -  total flux cleaned = 0.0886751 Jy
! Component: 150  -  total flux cleaned = 0.0944586 Jy
! Component: 200  -  total flux cleaned = 0.0976284 Jy
! Total flux subtracted in 200 components = 0.0976284 Jy
! Clean residual min=-0.003058 max=0.003404 Jy/beam
! Clean residual mean=-0.000004 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.0976284 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0976284 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.136 mas, bmaj=6.246 mas, bpa=-3.843 degrees
! Estimated noise=0.529354 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211798 Jy
! Component: 100  -  total flux cleaned = 0.00255458 Jy
! Component: 150  -  total flux cleaned = 0.0028647 Jy
! Component: 200  -  total flux cleaned = 0.00310393 Jy
! Total flux subtracted in 200 components = 0.00310393 Jy
! Clean residual min=-0.002253 max=0.002375 Jy/beam
! Clean residual mean=-0.000003 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.100732 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 32 components and 0.100732 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.574 mas, bmaj=8.921 mas, bpa=-2.622 degrees
! Estimated noise=0.711688 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120229 Jy
! Component: 100  -  total flux cleaned = 0.00129759 Jy
! Component: 150  -  total flux cleaned = 0.00132992 Jy
! Component: 200  -  total flux cleaned = 0.00134021 Jy
! Total flux subtracted in 200 components = 0.00134021 Jy
! Clean residual min=-0.002398 max=0.002590 Jy/beam
! Clean residual mean=-0.000002 rms=0.000708 Jy/beam
! Combined flux in latest and established models = 0.102073 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.00683e-05 Jy
! Component: 100  -  total flux cleaned = 1.96556e-05 Jy
! Component: 150  -  total flux cleaned = 2.93579e-05 Jy
! Component: 200  -  total flux cleaned = 3.92566e-05 Jy
! Total flux subtracted in 200 components = 3.92566e-05 Jy
! Clean residual min=-0.002388 max=0.002585 Jy/beam
! Clean residual mean=-0.000002 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.102112 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 40 components and 0.102112 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.136 mas, bmaj=6.246 mas, bpa=-3.843 degrees
! Estimated noise=0.529354 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000374687 Jy
! Component: 100  -  total flux cleaned = -0.00039309 Jy
! Component: 150  -  total flux cleaned = -0.000411975 Jy
! Component: 200  -  total flux cleaned = -0.000445805 Jy
! Total flux subtracted in 200 components = -0.000445805 Jy
! Clean residual min=-0.002187 max=0.002378 Jy/beam
! Clean residual mean=-0.000002 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.101666 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 52 components and 0.101666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057326Jy  sigma=1.191554
! Fit after  self-cal, rms=0.057324Jy  sigma=1.191443
wmodel J0359+2758_S_map.mod
! Writing 52 model components to file: J0359+2758_S_map.mod
wobs   J0359+2758_S_uvs.fits
! Writing UV FITS file: J0359+2758_S_uvs.fits
wwins  J0359+2758_S_map.win
! wwins: Wrote 1 windows to J0359+2758_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000231529 Jy
! Component: 100  -  total flux cleaned = 0.000112285 Jy
! Component: 150  -  total flux cleaned = 3.67364e-05 Jy
! Component: 200  -  total flux cleaned = -3.64292e-05 Jy
! Component: 250  -  total flux cleaned = -0.00014195 Jy
! Component: 300  -  total flux cleaned = -0.000141152 Jy
! Component: 350  -  total flux cleaned = -0.000175364 Jy
! Component: 400  -  total flux cleaned = -0.000175893 Jy
! Component: 450  -  total flux cleaned = -0.000143967 Jy
! Component: 500  -  total flux cleaned = -0.00023798 Jy
! Component: 550  -  total flux cleaned = -0.000360853 Jy
! Component: 600  -  total flux cleaned = -0.000270478 Jy
! Component: 650  -  total flux cleaned = -0.000359665 Jy
! Component: 700  -  total flux cleaned = -0.000300629 Jy
! Component: 750  -  total flux cleaned = -0.000214853 Jy
! Component: 800  -  total flux cleaned = -0.000327715 Jy
! Component: 850  -  total flux cleaned = -0.000299154 Jy
! Component: 900  -  total flux cleaned = -0.000354185 Jy
! Component: 950  -  total flux cleaned = -0.00035372 Jy
! Component: 1000  -  total flux cleaned = -0.000434056 Jy
! Component: 1050  -  total flux cleaned = -0.000460288 Jy
! Component: 1100  -  total flux cleaned = -0.000460114 Jy
! Component: 1150  -  total flux cleaned = -0.00046058 Jy
! Component: 1200  -  total flux cleaned = -0.000461049 Jy
! Component: 1250  -  total flux cleaned = -0.00053614 Jy
! Component: 1300  -  total flux cleaned = -0.000511707 Jy
! Component: 1350  -  total flux cleaned = -0.000535522 Jy
! Component: 1400  -  total flux cleaned = -0.000511262 Jy
! Component: 1450  -  total flux cleaned = -0.000535081 Jy
! Component: 1500  -  total flux cleaned = -0.000464143 Jy
! Component: 1550  -  total flux cleaned = -0.000372065 Jy
! Component: 1600  -  total flux cleaned = -0.000395136 Jy
! Component: 1650  -  total flux cleaned = -0.000304801 Jy
! Component: 1700  -  total flux cleaned = -0.000416392 Jy
! Component: 1750  -  total flux cleaned = -0.000305566 Jy
! Component: 1800  -  total flux cleaned = -0.000328054 Jy
! Component: 1850  -  total flux cleaned = -0.000327982 Jy
! Component: 1900  -  total flux cleaned = -0.000349621 Jy
! Component: 1950  -  total flux cleaned = -0.000243637 Jy
! Component: 2000  -  total flux cleaned = -0.000243567 Jy
! Component: 2050  -  total flux cleaned = -0.000181379 Jy
! Component: 2100  -  total flux cleaned = -9.95177e-05 Jy
! Component: 2150  -  total flux cleaned = -9.94243e-05 Jy
! Component: 2200  -  total flux cleaned = -1.90688e-05 Jy
! Component: 2250  -  total flux cleaned = 9.80198e-07 Jy
! Component: 2300  -  total flux cleaned = 0.000119455 Jy
! Component: 2350  -  total flux cleaned = 0.000119277 Jy
! Component: 2400  -  total flux cleaned = 0.00013887 Jy
! Component: 2450  -  total flux cleaned = 0.000215621 Jy
! Component: 2500  -  total flux cleaned = 0.00027252 Jy
! Component: 2550  -  total flux cleaned = 0.000329354 Jy
! Component: 2600  -  total flux cleaned = 0.000404178 Jy
! Component: 2650  -  total flux cleaned = 0.000533757 Jy
! Component: 2700  -  total flux cleaned = 0.000588894 Jy
! Component: 2750  -  total flux cleaned = 0.000661529 Jy
! Component: 2800  -  total flux cleaned = 0.000715703 Jy
! Component: 2850  -  total flux cleaned = 0.000751617 Jy
! Component: 2900  -  total flux cleaned = 0.0008577 Jy
! Component: 2950  -  total flux cleaned = 0.000910461 Jy
! Component: 3000  -  total flux cleaned = 0.0008932 Jy
! Component: 3050  -  total flux cleaned = 0.000962577 Jy
! Component: 3100  -  total flux cleaned = 0.0010483 Jy
! Component: 3150  -  total flux cleaned = 0.00104821 Jy
! Component: 3200  -  total flux cleaned = 0.00118323 Jy
! Component: 3250  -  total flux cleaned = 0.00118301 Jy
! Component: 3300  -  total flux cleaned = 0.00118299 Jy
! Component: 3350  -  total flux cleaned = 0.00118288 Jy
! Component: 3400  -  total flux cleaned = 0.00134627 Jy
! Component: 3450  -  total flux cleaned = 0.00129751 Jy
! Component: 3500  -  total flux cleaned = 0.00131346 Jy
! Component: 3550  -  total flux cleaned = 0.00136133 Jy
! Component: 3600  -  total flux cleaned = 0.00142493 Jy
! Component: 3650  -  total flux cleaned = 0.00142485 Jy
! Component: 3700  -  total flux cleaned = 0.00140921 Jy
! Component: 3750  -  total flux cleaned = 0.00142475 Jy
! Component: 3800  -  total flux cleaned = 0.00144009 Jy
! Component: 3850  -  total flux cleaned = 0.00140958 Jy
! Component: 3900  -  total flux cleaned = 0.00143999 Jy
! Component: 3950  -  total flux cleaned = 0.00137964 Jy
! Component: 4000  -  total flux cleaned = 0.00142468 Jy
! Component: 4050  -  total flux cleaned = 0.00142456 Jy
! Total flux subtracted in 4096 components = 0.00145406 Jy
! Clean residual min=-0.000882 max=0.000944 Jy/beam
! Clean residual mean=-0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.10312 Jy
keep
! Adding 294 model components to the UV plane model.
! The established model now contains 346 components and 0.10312 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0359+2758_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.136 x 6.246 at -3.843 degrees (North through East)
! Clean map  min=-0.0018791  max=0.093956 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0359+2758_S_map.fits
wmodel /vlbi/uf001/uva//J0359+2758_S_map.mod
! Writing 346 model components to file: /vlbi/uf001/uva//J0359+2758_S_map.mod
wobs   /vlbi/uf001/uva//J0359+2758_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0359+2758_S_uvs.fits
wwins  /vlbi/uf001/uva//J0359+2758_S_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0359+2758_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0939557 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000266591 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.851223 0.851223 1.70245 3.40489 6.80979 13.6196 27.2391 54.4783
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.093 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  352.434 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0359+2758_S_dfm.log closed on Sun Jan 13 21:58:50 2019