! Started logfile: /vlbi/uf001/uva//J0358+5606_S_dfm.log on Sun Jan 13 21:58:32 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0358+5606_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0358+5606_S_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.972531 visibilities/baseline/integration-bin.
! Found source: J0358+5606
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 9453 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0358+5606_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.093959Jy  sigma=20.491258
! Fit after  self-cal, rms=0.517751Jy  sigma=9.898238
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.106 mas, bmaj=3.897 mas, bpa=4.315 degrees
! Estimated noise=0.639677 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.366662 Jy
! Component: 100  -  total flux cleaned = 0.452471 Jy
! Total flux subtracted in 100 components = 0.452471 Jy
! Clean residual min=-0.010985 max=0.033749 Jy/beam
! Clean residual mean=-0.000086 rms=0.003198 Jy/beam
! Combined flux in latest and established models = 0.452471 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.452471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102336Jy  sigma=1.694986
! Fit after  self-cal, rms=0.102308Jy  sigma=1.694416
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0384261 Jy
! Component: 100  -  total flux cleaned = 0.0602663 Jy
! Total flux subtracted in 100 components = 0.0602663 Jy
! Clean residual min=-0.007239 max=0.011820 Jy/beam
! Clean residual mean=-0.000047 rms=0.001789 Jy/beam
! Combined flux in latest and established models = 0.512737 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 22 components and 0.512737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081605Jy  sigma=1.262897
! Fit after  self-cal, rms=0.081485Jy  sigma=1.260432
! Inverting map 
! Added new window around map position (-3, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136201 Jy
! Component: 100  -  total flux cleaned = 0.0224086 Jy
! Total flux subtracted in 100 components = 0.0224086 Jy
! Clean residual min=-0.005701 max=0.008248 Jy/beam
! Clean residual mean=-0.000034 rms=0.001485 Jy/beam
! Combined flux in latest and established models = 0.535146 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 38 components and 0.535146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077990Jy  sigma=1.188674
! Fit after  self-cal, rms=0.077907Jy  sigma=1.186957
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.793 mas, bmaj=4.794 mas, bpa=10.15 degrees
! Estimated noise=0.387107 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.5, 5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111859 Jy
! Component: 100  -  total flux cleaned = 0.0188884 Jy
! Component: 150  -  total flux cleaned = 0.0246659 Jy
! Component: 200  -  total flux cleaned = 0.0291221 Jy
! Total flux subtracted in 200 components = 0.0291221 Jy
! Clean residual min=-0.004340 max=0.007132 Jy/beam
! Clean residual mean=-0.000047 rms=0.001156 Jy/beam
! Combined flux in latest and established models = 0.564268 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 72 components and 0.564268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075599Jy  sigma=1.140062
! Fit after  self-cal, rms=0.075521Jy  sigma=1.138561
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.793 x 4.794 at 10.15 degrees (North through East)
! Clean map  min=-0.0042864  max=0.47923 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.04     KP        1.00     
!   LA        0.96     MK        1.00     NL        1.02     OV        0.98     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        1.03     KP        1.01     
!   LA        0.95     MK        0.98     NL        1.02     OV        0.97     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        1.01     KP        1.00     
!   LA        0.95     MK        1.00     NL        1.02     OV        0.97     
!   PT        0.99     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.075521Jy  sigma=1.138561
! Fit after  self-cal, rms=0.071416Jy  sigma=1.091866
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.799 mas, bmaj=4.807 mas, bpa=10.07 degrees
! Estimated noise=0.386196 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00115046 Jy
! Component: 100  -  total flux cleaned = -0.00169439 Jy
! Component: 150  -  total flux cleaned = -0.00216507 Jy
! Component: 200  -  total flux cleaned = -0.00257583 Jy
! Total flux subtracted in 200 components = -0.00257583 Jy
! Clean residual min=-0.002525 max=0.003062 Jy/beam
! Clean residual mean=-0.000005 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.561692 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 86 components and 0.561692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071324Jy  sigma=1.089308
! Fit after  self-cal, rms=0.071316Jy  sigma=1.089165
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071316Jy  sigma=1.089165
! Fit after  self-cal, rms=0.070006Jy  sigma=1.062470
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.793 mas, bmaj=4.813 mas, bpa=10.37 degrees
! Estimated noise=0.385949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00117592 Jy
! Component: 100  -  total flux cleaned = -0.00190105 Jy
! Component: 150  -  total flux cleaned = -0.00249494 Jy
! Component: 200  -  total flux cleaned = -0.00284649 Jy
! Total flux subtracted in 200 components = -0.00284649 Jy
! Clean residual min=-0.001617 max=0.002119 Jy/beam
! Clean residual mean=-0.000006 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.558845 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 100 components and 0.558845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069942Jy  sigma=1.060564
! Fit after  self-cal, rms=0.069938Jy  sigma=1.060445
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-21.5, 24.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113255 Jy
! Component: 100  -  total flux cleaned = 0.00118808 Jy
! Component: 150  -  total flux cleaned = 0.000980913 Jy
! Component: 200  -  total flux cleaned = 0.000804026 Jy
! Total flux subtracted in 200 components = 0.000804026 Jy
! Clean residual min=-0.001585 max=0.001621 Jy/beam
! Clean residual mean=-0.000006 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.559649 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 115 components and 0.559649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069872Jy  sigma=1.058770
! Fit after  self-cal, rms=0.069868Jy  sigma=1.058703
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069868Jy  sigma=1.058703
! Fit after  self-cal, rms=0.069772Jy  sigma=1.058367
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.791 mas, bmaj=4.815 mas, bpa=10.46 degrees
! Estimated noise=0.385948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00052499 Jy
! Component: 100  -  total flux cleaned = -0.000751388 Jy
! Component: 150  -  total flux cleaned = -0.000918647 Jy
! Component: 200  -  total flux cleaned = -0.00109949 Jy
! Total flux subtracted in 200 components = -0.00109949 Jy
! Clean residual min=-0.001561 max=0.001544 Jy/beam
! Clean residual mean=-0.000008 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.55855 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 125 components and 0.55855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069744Jy  sigma=1.057527
! Fit after  self-cal, rms=0.069742Jy  sigma=1.057502
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000148773 Jy
! Component: 100  -  total flux cleaned = -0.000282582 Jy
! Component: 150  -  total flux cleaned = -0.000356843 Jy
! Component: 200  -  total flux cleaned = -0.000404006 Jy
! Total flux subtracted in 200 components = -0.000404006 Jy
! Clean residual min=-0.001542 max=0.001502 Jy/beam
! Clean residual mean=-0.000008 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.558146 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 130 components and 0.558145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069728Jy  sigma=1.057082
! Fit after  self-cal, rms=0.069727Jy  sigma=1.057070
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069727Jy  sigma=1.057070
! Fit after  self-cal, rms=0.069690Jy  sigma=1.056952
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.837 mas, bmaj=8.563 mas, bpa=28.2 degrees
! Estimated noise=0.498614 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000361677 Jy
! Component: 100  -  total flux cleaned = -0.000472596 Jy
! Component: 150  -  total flux cleaned = -0.000568899 Jy
! Component: 200  -  total flux cleaned = -0.000638262 Jy
! Total flux subtracted in 200 components = -0.000638262 Jy
! Clean residual min=-0.001895 max=0.001769 Jy/beam
! Clean residual mean=-0.000020 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.557507 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 150 components and 0.557507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069688Jy  sigma=1.056780
! Fit after  self-cal, rms=0.069687Jy  sigma=1.056760
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.81407e-05 Jy
! Component: 100  -  total flux cleaned = 1.81339e-05 Jy
! Component: 150  -  total flux cleaned = 6.53165e-06 Jy
! Component: 200  -  total flux cleaned = -3.41871e-06 Jy
! Total flux subtracted in 200 components = -3.41871e-06 Jy
! Clean residual min=-0.001889 max=0.001751 Jy/beam
! Clean residual mean=-0.000020 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.557504 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 155 components and 0.557504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069686Jy  sigma=1.056697
! Fit after  self-cal, rms=0.069686Jy  sigma=1.056694
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.79 mas, bmaj=4.816 mas, bpa=10.53 degrees
! Estimated noise=0.385934 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.79 x 4.816 at 10.53 degrees (North through East)
! Clean map  min=-0.0014907  max=0.47843 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.1 mas, bmaj=3.913 mas, bpa=5.171 degrees
! Estimated noise=0.639411 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.366388 Jy
! Component: 100  -  total flux cleaned = 0.453031 Jy
! Component: 150  -  total flux cleaned = 0.490817 Jy
! Component: 200  -  total flux cleaned = 0.512268 Jy
! Total flux subtracted in 200 components = 0.512268 Jy
! Clean residual min=-0.004702 max=0.010707 Jy/beam
! Clean residual mean=-0.000029 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.512268 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.512268 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.79 mas, bmaj=4.816 mas, bpa=10.53 degrees
! Estimated noise=0.385934 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158936 Jy
! Component: 100  -  total flux cleaned = 0.0248888 Jy
! Component: 150  -  total flux cleaned = 0.0305853 Jy
! Component: 200  -  total flux cleaned = 0.0343306 Jy
! Total flux subtracted in 200 components = 0.0343306 Jy
! Clean residual min=-0.001802 max=0.002264 Jy/beam
! Clean residual mean=-0.000018 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.546598 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 49 components and 0.546598 Jy
! Inverting map 
! Added new window around map position (-3, -3.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00279251 Jy
! Component: 100  -  total flux cleaned = 0.00460373 Jy
! Component: 150  -  total flux cleaned = 0.00564407 Jy
! Component: 200  -  total flux cleaned = 0.00658251 Jy
! Total flux subtracted in 200 components = 0.00658251 Jy
! Clean residual min=-0.001579 max=0.001544 Jy/beam
! Clean residual mean=-0.000012 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.553181 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 70 components and 0.553181 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.837 mas, bmaj=8.563 mas, bpa=28.2 degrees
! Estimated noise=0.498614 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015212 Jy
! Component: 100  -  total flux cleaned = 0.00250125 Jy
! Component: 150  -  total flux cleaned = 0.0032367 Jy
! Component: 200  -  total flux cleaned = 0.00358565 Jy
! Total flux subtracted in 200 components = 0.00358565 Jy
! Clean residual min=-0.001769 max=0.001723 Jy/beam
! Clean residual mean=-0.000022 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.556766 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000307487 Jy
! Component: 100  -  total flux cleaned = 0.000454013 Jy
! Component: 150  -  total flux cleaned = 0.000595559 Jy
! Component: 200  -  total flux cleaned = 0.000645177 Jy
! Total flux subtracted in 200 components = 0.000645177 Jy
! Clean residual min=-0.001763 max=0.001713 Jy/beam
! Clean residual mean=-0.000021 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.557411 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 124 components and 0.557411 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.79 mas, bmaj=4.816 mas, bpa=10.53 degrees
! Estimated noise=0.385934 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000437909 Jy
! Component: 100  -  total flux cleaned = -0.000479702 Jy
! Component: 150  -  total flux cleaned = -0.000520647 Jy
! Component: 200  -  total flux cleaned = -0.000555592 Jy
! Total flux subtracted in 200 components = -0.000555592 Jy
! Clean residual min=-0.001486 max=0.001539 Jy/beam
! Clean residual mean=-0.000009 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.556856 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 141 components and 0.556856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069718Jy  sigma=1.057339
! Fit after  self-cal, rms=0.069707Jy  sigma=1.057134
wmodel J0358+5606_S_map.mod
! Writing 141 model components to file: J0358+5606_S_map.mod
wobs   J0358+5606_S_uvs.fits
! Writing UV FITS file: J0358+5606_S_uvs.fits
wwins  J0358+5606_S_map.win
! wwins: Wrote 5 windows to J0358+5606_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -8.15718e-05 Jy
! Component: 100  -  total flux cleaned = -0.000105871 Jy
! Component: 150  -  total flux cleaned = -0.000129735 Jy
! Component: 200  -  total flux cleaned = -0.00012903 Jy
! Component: 250  -  total flux cleaned = -0.000105848 Jy
! Component: 300  -  total flux cleaned = -6.04879e-05 Jy
! Component: 350  -  total flux cleaned = 2.80552e-05 Jy
! Component: 400  -  total flux cleaned = 0.00017938 Jy
! Component: 450  -  total flux cleaned = 0.000200496 Jy
! Component: 500  -  total flux cleaned = 0.000283906 Jy
! Component: 550  -  total flux cleaned = 0.00034492 Jy
! Component: 600  -  total flux cleaned = 0.000344748 Jy
! Component: 650  -  total flux cleaned = 0.000344667 Jy
! Component: 700  -  total flux cleaned = 0.000324763 Jy
! Component: 750  -  total flux cleaned = 0.000189574 Jy
! Component: 800  -  total flux cleaned = 0.000208663 Jy
! Component: 850  -  total flux cleaned = 0.00015192 Jy
! Component: 900  -  total flux cleaned = 5.91312e-05 Jy
! Component: 950  -  total flux cleaned = -1.39513e-05 Jy
! Component: 1000  -  total flux cleaned = -6.82328e-05 Jy
! Component: 1050  -  total flux cleaned = -0.000103917 Jy
! Component: 1100  -  total flux cleaned = -0.00017433 Jy
! Component: 1150  -  total flux cleaned = -0.000156964 Jy
! Component: 1200  -  total flux cleaned = -0.000190828 Jy
! Component: 1250  -  total flux cleaned = -0.000190684 Jy
! Component: 1300  -  total flux cleaned = -0.000190681 Jy
! Component: 1350  -  total flux cleaned = -0.000256974 Jy
! Component: 1400  -  total flux cleaned = -0.00024098 Jy
! Component: 1450  -  total flux cleaned = -0.000289976 Jy
! Component: 1500  -  total flux cleaned = -0.000322407 Jy
! Component: 1550  -  total flux cleaned = -0.000354768 Jy
! Component: 1600  -  total flux cleaned = -0.000418197 Jy
! Component: 1650  -  total flux cleaned = -0.000465268 Jy
! Component: 1700  -  total flux cleaned = -0.000512264 Jy
! Component: 1750  -  total flux cleaned = -0.000589607 Jy
! Component: 1800  -  total flux cleaned = -0.000635508 Jy
! Component: 1850  -  total flux cleaned = -0.000635426 Jy
! Component: 1900  -  total flux cleaned = -0.000726051 Jy
! Component: 1950  -  total flux cleaned = -0.000785696 Jy
! Component: 2000  -  total flux cleaned = -0.000844822 Jy
! Component: 2050  -  total flux cleaned = -0.000888797 Jy
! Component: 2100  -  total flux cleaned = -0.00101994 Jy
! Component: 2150  -  total flux cleaned = -0.0010487 Jy
! Component: 2200  -  total flux cleaned = -0.00104874 Jy
! Component: 2250  -  total flux cleaned = -0.00112013 Jy
! Component: 2300  -  total flux cleaned = -0.0011201 Jy
! Component: 2350  -  total flux cleaned = -0.00116209 Jy
! Component: 2400  -  total flux cleaned = -0.00121771 Jy
! Component: 2450  -  total flux cleaned = -0.00123152 Jy
! Component: 2500  -  total flux cleaned = -0.00130014 Jy
! Component: 2550  -  total flux cleaned = -0.00138172 Jy
! Component: 2600  -  total flux cleaned = -0.00135466 Jy
! Component: 2650  -  total flux cleaned = -0.00140832 Jy
! Component: 2700  -  total flux cleaned = -0.00143488 Jy
! Component: 2750  -  total flux cleaned = -0.00151418 Jy
! Component: 2800  -  total flux cleaned = -0.00152725 Jy
! Component: 2850  -  total flux cleaned = -0.00159251 Jy
! Component: 2900  -  total flux cleaned = -0.00161851 Jy
! Component: 2950  -  total flux cleaned = -0.00172159 Jy
! Component: 3000  -  total flux cleaned = -0.00175981 Jy
! Component: 3050  -  total flux cleaned = -0.00182335 Jy
! Component: 3100  -  total flux cleaned = -0.00188645 Jy
! Component: 3150  -  total flux cleaned = -0.00189901 Jy
! Component: 3200  -  total flux cleaned = -0.00198611 Jy
! Component: 3250  -  total flux cleaned = -0.002048 Jy
! Component: 3300  -  total flux cleaned = -0.002048 Jy
! Component: 3350  -  total flux cleaned = -0.00212133 Jy
! Component: 3400  -  total flux cleaned = -0.00224281 Jy
! Component: 3450  -  total flux cleaned = -0.00230305 Jy
! Component: 3500  -  total flux cleaned = -0.00233903 Jy
! Component: 3550  -  total flux cleaned = -0.00239844 Jy
! Component: 3600  -  total flux cleaned = -0.00244572 Jy
! Component: 3650  -  total flux cleaned = -0.00251642 Jy
! Component: 3700  -  total flux cleaned = -0.00253992 Jy
! Component: 3750  -  total flux cleaned = -0.00259813 Jy
! Component: 3800  -  total flux cleaned = -0.00269059 Jy
! Component: 3850  -  total flux cleaned = -0.0027594 Jy
! Component: 3900  -  total flux cleaned = -0.00279369 Jy
! Component: 3950  -  total flux cleaned = -0.00285044 Jy
! Component: 4000  -  total flux cleaned = -0.00290684 Jy
! Component: 4050  -  total flux cleaned = -0.003019 Jy
! Total flux subtracted in 4096 components = -0.00304125 Jy
! Clean residual min=-0.000753 max=0.000613 Jy/beam
! Clean residual mean=-0.000006 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.553815 Jy
keep
! Adding 274 model components to the UV plane model.
! The established model now contains 415 components and 0.553814 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0358+5606_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.79 x 4.816 at 10.53 degrees (North through East)
! Clean map  min=-0.0012339  max=0.47894 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0358+5606_S_map.fits
wmodel /vlbi/uf001/uva//J0358+5606_S_map.mod
! Writing 415 model components to file: /vlbi/uf001/uva//J0358+5606_S_map.mod
wobs   /vlbi/uf001/uva//J0358+5606_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0358+5606_S_uvs.fits
wwins  /vlbi/uf001/uva//J0358+5606_S_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J0358+5606_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.478941 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000195735 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.122605 0.122605 0.24521 0.49042 0.98084 1.96168 3.92336 7.84672 15.6934 31.3869 62.7738
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.478 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2446.88 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0358+5606_S_dfm.log closed on Sun Jan 13 21:58:37 2019