! Started logfile: /vlbi/uf001/uva//J0356+6043_S_dfm.log on Sun Jan 13 21:57:44 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0356+6043_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0356+6043_S_uva.fits
! AN table 1: 76 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.869883 visibilities/baseline/integration-bin.
! Found source: J0356+6043
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8925 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0356+6043_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 109 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.046662Jy  sigma=22.541816
! Fit after  self-cal, rms=0.738393Jy  sigma=15.891544
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.09 mas, bmaj=4.179 mas, bpa=-0.707 degrees
! Estimated noise=0.51153 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.20111 Jy
! Component: 100  -  total flux cleaned = 0.249332 Jy
! Total flux subtracted in 100 components = 0.249332 Jy
! Clean residual min=-0.007115 max=0.018793 Jy/beam
! Clean residual mean=-0.000031 rms=0.001738 Jy/beam
! Combined flux in latest and established models = 0.249332 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.249332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081787Jy  sigma=1.481927
! Fit after  self-cal, rms=0.081752Jy  sigma=1.480824
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0201672 Jy
! Component: 100  -  total flux cleaned = 0.030841 Jy
! Total flux subtracted in 100 components = 0.030841 Jy
! Clean residual min=-0.004744 max=0.006593 Jy/beam
! Clean residual mean=-0.000015 rms=0.001181 Jy/beam
! Combined flux in latest and established models = 0.280173 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.280173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075404Jy  sigma=1.329084
! Fit after  self-cal, rms=0.075282Jy  sigma=1.325660
! Inverting map 
! Added new window around map position (3.5, -4.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0081202 Jy
! Component: 100  -  total flux cleaned = 0.0135587 Jy
! Total flux subtracted in 100 components = 0.0135587 Jy
! Clean residual min=-0.004381 max=0.004173 Jy/beam
! Clean residual mean=-0.000010 rms=0.001028 Jy/beam
! Combined flux in latest and established models = 0.293732 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 35 components and 0.293732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074065Jy  sigma=1.296274
! Fit after  self-cal, rms=0.074012Jy  sigma=1.294669
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.632 mas, bmaj=4.799 mas, bpa=2.836 degrees
! Estimated noise=0.373813 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00592577 Jy
! Component: 100  -  total flux cleaned = 0.009831 Jy
! Component: 150  -  total flux cleaned = 0.0126535 Jy
! Component: 200  -  total flux cleaned = 0.01472 Jy
! Total flux subtracted in 200 components = 0.01472 Jy
! Clean residual min=-0.004079 max=0.003823 Jy/beam
! Clean residual mean=-0.000018 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.308452 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 53 components and 0.308452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073406Jy  sigma=1.280855
! Fit after  self-cal, rms=0.073380Jy  sigma=1.279791
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.632 x 4.799 at 2.836 degrees (North through East)
! Clean map  min=-0.0037408  max=0.25884 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.01     KP        1.01     
!   LA        0.96     MK        1.00     NL        1.03     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.00     KP        0.99     
!   LA        0.95     MK        1.00     NL        1.06     OV        1.04     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        0.99     
!   LA        0.93     MK        0.99     NL        1.02     OV        1.01     
!   PT        0.96     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.073380Jy  sigma=1.279791
! Fit after  self-cal, rms=0.072713Jy  sigma=1.260378
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.638 mas, bmaj=4.808 mas, bpa=2.786 degrees
! Estimated noise=0.373653 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000105575 Jy
! Component: 100  -  total flux cleaned = -0.000219612 Jy
! Component: 150  -  total flux cleaned = -0.000244615 Jy
! Component: 200  -  total flux cleaned = -0.000223934 Jy
! Total flux subtracted in 200 components = -0.000223934 Jy
! Clean residual min=-0.003348 max=0.002911 Jy/beam
! Clean residual mean=-0.000010 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.308228 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 62 components and 0.308228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072680Jy  sigma=1.259556
! Fit after  self-cal, rms=0.072678Jy  sigma=1.259365
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072678Jy  sigma=1.259365
! Fit after  self-cal, rms=0.063711Jy  sigma=1.232651
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.638 mas, bmaj=4.81 mas, bpa=2.867 degrees
! Estimated noise=0.37317 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000542443 Jy
! Component: 100  -  total flux cleaned = 0.000225364 Jy
! Component: 150  -  total flux cleaned = 6.06163e-05 Jy
! Component: 200  -  total flux cleaned = -2.41603e-05 Jy
! Total flux subtracted in 200 components = -2.41603e-05 Jy
! Clean residual min=-0.001877 max=0.002063 Jy/beam
! Clean residual mean=-0.000003 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.308204 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 74 components and 0.308204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063656Jy  sigma=1.231703
! Fit after  self-cal, rms=0.063638Jy  sigma=1.231538
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (90, -26).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170006 Jy
! Component: 100  -  total flux cleaned = 0.00225666 Jy
! Component: 150  -  total flux cleaned = 0.00232285 Jy
! Component: 200  -  total flux cleaned = 0.0023531 Jy
! Total flux subtracted in 200 components = 0.0023531 Jy
! Clean residual min=-0.001811 max=0.001788 Jy/beam
! Clean residual mean=-0.000004 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.310557 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 86 components and 0.310557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063569Jy  sigma=1.230446
! Fit after  self-cal, rms=0.063564Jy  sigma=1.230362
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063564Jy  sigma=1.230362
! Fit after  self-cal, rms=0.063555Jy  sigma=1.230102
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.636 mas, bmaj=4.808 mas, bpa=2.979 degrees
! Estimated noise=0.373009 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00073626 Jy
! Component: 100  -  total flux cleaned = 0.000737389 Jy
! Component: 150  -  total flux cleaned = 0.00070976 Jy
! Component: 200  -  total flux cleaned = 0.000709833 Jy
! Total flux subtracted in 200 components = 0.000709833 Jy
! Clean residual min=-0.001806 max=0.001753 Jy/beam
! Clean residual mean=-0.000004 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.311267 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 93 components and 0.311267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063520Jy  sigma=1.229622
! Fit after  self-cal, rms=0.063519Jy  sigma=1.229589
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000101607 Jy
! Component: 100  -  total flux cleaned = 7.74059e-05 Jy
! Component: 150  -  total flux cleaned = 7.79742e-05 Jy
! Component: 200  -  total flux cleaned = 9.9695e-05 Jy
! Total flux subtracted in 200 components = 9.9695e-05 Jy
! Clean residual min=-0.001777 max=0.001751 Jy/beam
! Clean residual mean=-0.000005 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.311367 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 96 components and 0.311367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063499Jy  sigma=1.229301
! Fit after  self-cal, rms=0.063498Jy  sigma=1.229284
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063498Jy  sigma=1.229284
! Fit after  self-cal, rms=0.063519Jy  sigma=1.229225
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.639 mas, bmaj=8.584 mas, bpa=17.37 degrees
! Estimated noise=0.479638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000711349 Jy
! Component: 100  -  total flux cleaned = 0.000795683 Jy
! Component: 150  -  total flux cleaned = 0.000833994 Jy
! Component: 200  -  total flux cleaned = 0.000881087 Jy
! Total flux subtracted in 200 components = 0.000881087 Jy
! Clean residual min=-0.002246 max=0.002106 Jy/beam
! Clean residual mean=-0.000012 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.312248 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 102 components and 0.312248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063516Jy  sigma=1.229423
! Fit after  self-cal, rms=0.063514Jy  sigma=1.229395
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.71227e-05 Jy
! Component: 100  -  total flux cleaned = 8.34757e-05 Jy
! Component: 150  -  total flux cleaned = 8.36463e-05 Jy
! Component: 200  -  total flux cleaned = 7.25562e-05 Jy
! Total flux subtracted in 200 components = 7.25562e-05 Jy
! Clean residual min=-0.002267 max=0.002128 Jy/beam
! Clean residual mean=-0.000012 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.31232 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 106 components and 0.31232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063512Jy  sigma=1.229433
! Fit after  self-cal, rms=0.063511Jy  sigma=1.229428
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.636 mas, bmaj=4.807 mas, bpa=3.076 degrees
! Estimated noise=0.37298 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.636 x 4.807 at 3.076 degrees (North through East)
! Clean map  min=-0.001792  max=0.25852 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.091 mas, bmaj=4.176 mas, bpa=-0.6595 degrees
! Estimated noise=0.510412 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.200386 Jy
! Component: 100  -  total flux cleaned = 0.250241 Jy
! Component: 150  -  total flux cleaned = 0.272143 Jy
! Component: 200  -  total flux cleaned = 0.28387 Jy
! Total flux subtracted in 200 components = 0.28387 Jy
! Clean residual min=-0.003316 max=0.005721 Jy/beam
! Clean residual mean=-0.000012 rms=0.000809 Jy/beam
! Combined flux in latest and established models = 0.28387 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.28387 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.636 mas, bmaj=4.807 mas, bpa=3.076 degrees
! Estimated noise=0.37298 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0085348 Jy
! Component: 100  -  total flux cleaned = 0.0136667 Jy
! Component: 150  -  total flux cleaned = 0.0171663 Jy
! Component: 200  -  total flux cleaned = 0.0197049 Jy
! Total flux subtracted in 200 components = 0.0197049 Jy
! Clean residual min=-0.001911 max=0.001922 Jy/beam
! Clean residual mean=-0.000009 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.303574 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 42 components and 0.303574 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.639 mas, bmaj=8.584 mas, bpa=17.37 degrees
! Estimated noise=0.479638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00291355 Jy
! Component: 100  -  total flux cleaned = 0.00455088 Jy
! Component: 150  -  total flux cleaned = 0.00571159 Jy
! Component: 200  -  total flux cleaned = 0.00655634 Jy
! Total flux subtracted in 200 components = 0.00655634 Jy
! Clean residual min=-0.002298 max=0.002177 Jy/beam
! Clean residual mean=-0.000014 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.310131 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000597697 Jy
! Component: 100  -  total flux cleaned = 0.000867069 Jy
! Component: 150  -  total flux cleaned = 0.0010735 Jy
! Component: 200  -  total flux cleaned = 0.00118354 Jy
! Total flux subtracted in 200 components = 0.00118354 Jy
! Clean residual min=-0.002266 max=0.002108 Jy/beam
! Clean residual mean=-0.000014 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.311314 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 93 components and 0.311314 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.636 mas, bmaj=4.807 mas, bpa=3.076 degrees
! Estimated noise=0.37298 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000627063 Jy
! Component: 100  -  total flux cleaned = -0.000597306 Jy
! Component: 150  -  total flux cleaned = -0.000530836 Jy
! Component: 200  -  total flux cleaned = -0.000501155 Jy
! Total flux subtracted in 200 components = -0.000501155 Jy
! Clean residual min=-0.001813 max=0.001840 Jy/beam
! Clean residual mean=-0.000006 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.310813 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 107 components and 0.310813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063536Jy  sigma=1.229939
! Fit after  self-cal, rms=0.063523Jy  sigma=1.229634
wmodel J0356+6043_S_map.mod
! Writing 107 model components to file: J0356+6043_S_map.mod
wobs   J0356+6043_S_uvs.fits
! Writing UV FITS file: J0356+6043_S_uvs.fits
wwins  J0356+6043_S_map.win
! wwins: Wrote 3 windows to J0356+6043_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00016305 Jy
! Component: 100  -  total flux cleaned = -0.000258982 Jy
! Component: 150  -  total flux cleaned = -0.000198939 Jy
! Component: 200  -  total flux cleaned = -0.000140056 Jy
! Component: 250  -  total flux cleaned = -0.000139675 Jy
! Component: 300  -  total flux cleaned = -5.6446e-05 Jy
! Component: 350  -  total flux cleaned = 5.10212e-05 Jy
! Component: 400  -  total flux cleaned = -1.96187e-06 Jy
! Component: 450  -  total flux cleaned = 5.01298e-05 Jy
! Component: 500  -  total flux cleaned = 0.00017732 Jy
! Component: 550  -  total flux cleaned = 0.000277195 Jy
! Component: 600  -  total flux cleaned = 0.000375523 Jy
! Component: 650  -  total flux cleaned = 0.000448678 Jy
! Component: 700  -  total flux cleaned = 0.00066368 Jy
! Component: 750  -  total flux cleaned = 0.00082784 Jy
! Component: 800  -  total flux cleaned = 0.000897079 Jy
! Component: 850  -  total flux cleaned = 0.00103408 Jy
! Component: 900  -  total flux cleaned = 0.00110185 Jy
! Component: 950  -  total flux cleaned = 0.00116883 Jy
! Component: 1000  -  total flux cleaned = 0.00132261 Jy
! Component: 1050  -  total flux cleaned = 0.00136609 Jy
! Component: 1100  -  total flux cleaned = 0.00145251 Jy
! Component: 1150  -  total flux cleaned = 0.00166413 Jy
! Component: 1200  -  total flux cleaned = 0.00170575 Jy
! Component: 1250  -  total flux cleaned = 0.00187155 Jy
! Component: 1300  -  total flux cleaned = 0.00193297 Jy
! Component: 1350  -  total flux cleaned = 0.00203447 Jy
! Component: 1400  -  total flux cleaned = 0.00217469 Jy
! Component: 1450  -  total flux cleaned = 0.00217485 Jy
! Component: 1500  -  total flux cleaned = 0.00227326 Jy
! Component: 1550  -  total flux cleaned = 0.00235119 Jy
! Component: 1600  -  total flux cleaned = 0.00248622 Jy
! Component: 1650  -  total flux cleaned = 0.0025056 Jy
! Component: 1700  -  total flux cleaned = 0.0026383 Jy
! Component: 1750  -  total flux cleaned = 0.00261956 Jy
! Component: 1800  -  total flux cleaned = 0.0026382 Jy
! Component: 1850  -  total flux cleaned = 0.00274904 Jy
! Component: 1900  -  total flux cleaned = 0.00276711 Jy
! Component: 1950  -  total flux cleaned = 0.00283946 Jy
! Component: 2000  -  total flux cleaned = 0.00276785 Jy
! Component: 2050  -  total flux cleaned = 0.00287438 Jy
! Component: 2100  -  total flux cleaned = 0.00285677 Jy
! Component: 2150  -  total flux cleaned = 0.00283893 Jy
! Component: 2200  -  total flux cleaned = 0.00285621 Jy
! Component: 2250  -  total flux cleaned = 0.00289055 Jy
! Component: 2300  -  total flux cleaned = 0.00283942 Jy
! Component: 2350  -  total flux cleaned = 0.00289036 Jy
! Component: 2400  -  total flux cleaned = 0.00295751 Jy
! Component: 2450  -  total flux cleaned = 0.00290782 Jy
! Component: 2500  -  total flux cleaned = 0.00289122 Jy
! Component: 2550  -  total flux cleaned = 0.00287458 Jy
! Component: 2600  -  total flux cleaned = 0.00292329 Jy
! Component: 2650  -  total flux cleaned = 0.00292307 Jy
! Component: 2700  -  total flux cleaned = 0.00284284 Jy
! Component: 2750  -  total flux cleaned = 0.00285866 Jy
! Component: 2800  -  total flux cleaned = 0.0028429 Jy
! Component: 2850  -  total flux cleaned = 0.00284284 Jy
! Component: 2900  -  total flux cleaned = 0.00279638 Jy
! Component: 2950  -  total flux cleaned = 0.00285828 Jy
! Component: 3000  -  total flux cleaned = 0.00285827 Jy
! Component: 3050  -  total flux cleaned = 0.00285814 Jy
! Component: 3100  -  total flux cleaned = 0.0028278 Jy
! Component: 3150  -  total flux cleaned = 0.00278277 Jy
! Component: 3200  -  total flux cleaned = 0.00276791 Jy
! Component: 3250  -  total flux cleaned = 0.00281233 Jy
! Component: 3300  -  total flux cleaned = 0.00282717 Jy
! Component: 3350  -  total flux cleaned = 0.00282725 Jy
! Component: 3400  -  total flux cleaned = 0.00284169 Jy
! Component: 3450  -  total flux cleaned = 0.00289925 Jy
! Component: 3500  -  total flux cleaned = 0.00287042 Jy
! Component: 3550  -  total flux cleaned = 0.00287046 Jy
! Component: 3600  -  total flux cleaned = 0.00285633 Jy
! Component: 3650  -  total flux cleaned = 0.00282823 Jy
! Component: 3700  -  total flux cleaned = 0.00291188 Jy
! Component: 3750  -  total flux cleaned = 0.00288425 Jy
! Component: 3800  -  total flux cleaned = 0.00288417 Jy
! Component: 3850  -  total flux cleaned = 0.00291153 Jy
! Component: 3900  -  total flux cleaned = 0.00293864 Jy
! Component: 3950  -  total flux cleaned = 0.00289816 Jy
! Component: 4000  -  total flux cleaned = 0.00297868 Jy
! Component: 4050  -  total flux cleaned = 0.00292527 Jy
! Total flux subtracted in 4096 components = 0.0029783 Jy
! Clean residual min=-0.000820 max=0.000760 Jy/beam
! Clean residual mean=-0.000003 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.313792 Jy
keep
! Adding 309 model components to the UV plane model.
! The established model now contains 416 components and 0.313792 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0356+6043_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.636 x 4.807 at 3.076 degrees (North through East)
! Clean map  min=-0.0013324  max=0.2588 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0356+6043_S_map.fits
wmodel /vlbi/uf001/uva//J0356+6043_S_map.mod
! Writing 416 model components to file: /vlbi/uf001/uva//J0356+6043_S_map.mod
wobs   /vlbi/uf001/uva//J0356+6043_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0356+6043_S_uvs.fits
wwins  /vlbi/uf001/uva//J0356+6043_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0356+6043_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.258798 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000239585 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.277729 0.277729 0.555457 1.11091 2.22183 4.44366 8.88731 17.7746 35.5493 71.0985
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.258 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1080.19 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0356+6043_S_dfm.log closed on Sun Jan 13 21:57:49 2019