! Started logfile: /vlbi/uf001/uva//J0352-2514_X_dfm.log on Sun Jan 13 21:56:49 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0352-2514_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0352-2514_X_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.870175 visibilities/baseline/integration-bin.
! Found source: J0352-2514
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17856 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0352-2514_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.070198Jy  sigma=19.050971
! Fit after  self-cal, rms=0.633425Jy  sigma=11.071694
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.61 mas, bmaj=1.604 mas, bpa=-7.208 degrees
! Estimated noise=0.547284 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.293162 Jy
! Component: 100  -  total flux cleaned = 0.357103 Jy
! Total flux subtracted in 100 components = 0.357103 Jy
! Clean residual min=-0.015281 max=0.019871 Jy/beam
! Clean residual mean=0.000014 rms=0.003135 Jy/beam
! Combined flux in latest and established models = 0.357103 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.357103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092336Jy  sigma=1.573257
! Fit after  self-cal, rms=0.092331Jy  sigma=1.573210
! Inverting map 
! Added new window around map position (1, 5.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206129 Jy
! Component: 100  -  total flux cleaned = 0.030901 Jy
! Total flux subtracted in 100 components = 0.030901 Jy
! Clean residual min=-0.012761 max=0.014878 Jy/beam
! Clean residual mean=0.000013 rms=0.002683 Jy/beam
! Combined flux in latest and established models = 0.388004 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.388004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089052Jy  sigma=1.479301
! Fit after  self-cal, rms=0.088937Jy  sigma=1.476729
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7819 mas, bmaj=1.958 mas, bpa=-6.628 degrees
! Estimated noise=0.321018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00795394 Jy
! Component: 100  -  total flux cleaned = 0.0103774 Jy
! Component: 150  -  total flux cleaned = 0.0114704 Jy
! Component: 200  -  total flux cleaned = 0.0121386 Jy
! Total flux subtracted in 200 components = 0.0121386 Jy
! Clean residual min=-0.011744 max=0.013028 Jy/beam
! Clean residual mean=0.000021 rms=0.002937 Jy/beam
! Combined flux in latest and established models = 0.400143 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 29 components and 0.400142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088392Jy  sigma=1.455370
! Fit after  self-cal, rms=0.088306Jy  sigma=1.453459
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7819 x 1.958 at -6.628 degrees (North through East)
! Clean map  min=-0.010771  max=0.37354 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.97     HN        1.09     KP        0.99     
!   LA        0.84     MK        1.00     NL        1.12     OV        0.92     
!   PT        1.09     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.98     HN        1.10     KP        0.98     
!   LA        0.85     MK        0.99     NL        1.11     OV        0.92     
!   PT        1.12     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        1.11     KP        0.96     
!   LA        0.86     MK        1.00     NL        1.12     OV        0.91     
!   PT        1.11     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        1.12     KP        0.97     
!   LA        0.86     MK        0.99     NL        1.12     OV        0.90     
!   PT        1.08     SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     HN        1.10     KP        0.96     
!   LA        0.85     MK        1.00     NL        1.11     OV        0.92     
!   PT        1.12     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.98     HN        1.07     KP        0.97     
!   LA        0.84     MK        0.99     NL        1.13     OV        0.90     
!   PT        1.08     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.98     HN        1.08     KP        0.97     
!   LA        0.83     MK        0.97     NL        1.10     OV        0.91     
!   PT        1.12     SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        1.08     KP        0.96     
!   LA        0.82     MK        0.98     NL        1.11     OV        0.90     
!   PT        1.11     SC        0.94     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.98     HN        1.11     KP        0.96     
!   LA        0.85     MK        0.97     NL        1.11     OV        0.91     
!   PT        1.10     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.97     HN        1.12     KP        0.97     
!   LA        0.83     MK        0.97     NL        1.11     OV        0.90     
!   PT        1.10     SC        0.94     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        1.07     KP        0.95     
!   LA        0.83     MK        0.99     NL        1.12     OV        0.89     
!   PT        1.11     SC        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        1.07     KP        0.93     
!   LA        0.85     MK        0.97     NL        1.12     OV        0.92     
!   PT        1.11     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.088306Jy  sigma=1.453459
! Fit after  self-cal, rms=0.080161Jy  sigma=1.238223
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.778 mas, bmaj=1.946 mas, bpa=-5.975 degrees
! Estimated noise=0.320263 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, -3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000824078 Jy
! Component: 100  -  total flux cleaned = 0.00104773 Jy
! Component: 150  -  total flux cleaned = 0.000892663 Jy
! Component: 200  -  total flux cleaned = 0.000601911 Jy
! Total flux subtracted in 200 components = 0.000601911 Jy
! Clean residual min=-0.004900 max=0.004895 Jy/beam
! Clean residual mean=0.000007 rms=0.000935 Jy/beam
! Combined flux in latest and established models = 0.400744 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 46 components and 0.400744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078886Jy  sigma=1.215891
! Fit after  self-cal, rms=0.078920Jy  sigma=1.212798
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078920Jy  sigma=1.212798
! Fit after  self-cal, rms=0.078920Jy  sigma=1.196713
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7778 mas, bmaj=1.95 mas, bpa=-6.03 degrees
! Estimated noise=0.321281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.20768e-05 Jy
! Component: 100  -  total flux cleaned = 0.000968719 Jy
! Component: 150  -  total flux cleaned = 0.00136973 Jy
! Component: 200  -  total flux cleaned = 0.00150246 Jy
! Total flux subtracted in 200 components = 0.00150246 Jy
! Clean residual min=-0.003293 max=0.003514 Jy/beam
! Clean residual mean=0.000009 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.402247 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 59 components and 0.402247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078590Jy  sigma=1.190041
! Fit after  self-cal, rms=0.078547Jy  sigma=1.188925
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000435795 Jy
! Component: 100  -  total flux cleaned = 0.000438536 Jy
! Component: 150  -  total flux cleaned = 0.000390355 Jy
! Component: 200  -  total flux cleaned = 0.000253891 Jy
! Total flux subtracted in 200 components = 0.000253891 Jy
! Clean residual min=-0.002931 max=0.002873 Jy/beam
! Clean residual mean=0.000009 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.402501 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 69 components and 0.402501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078456Jy  sigma=1.187289
! Fit after  self-cal, rms=0.078442Jy  sigma=1.187068
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078442Jy  sigma=1.187068
! Fit after  self-cal, rms=0.078894Jy  sigma=1.185071
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.777 mas, bmaj=1.949 mas, bpa=-5.996 degrees
! Estimated noise=0.321804 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000333055 Jy
! Component: 100  -  total flux cleaned = 0.00067049 Jy
! Component: 150  -  total flux cleaned = 0.000630387 Jy
! Component: 200  -  total flux cleaned = 0.000559983 Jy
! Total flux subtracted in 200 components = 0.000559983 Jy
! Clean residual min=-0.002543 max=0.002317 Jy/beam
! Clean residual mean=0.000006 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.403061 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 82 components and 0.403061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078810Jy  sigma=1.183351
! Fit after  self-cal, rms=0.078799Jy  sigma=1.183066
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000170513 Jy
! Component: 100  -  total flux cleaned = 0.000171405 Jy
! Component: 150  -  total flux cleaned = 0.000106193 Jy
! Component: 200  -  total flux cleaned = 0.000107156 Jy
! Total flux subtracted in 200 components = 0.000107156 Jy
! Clean residual min=-0.002321 max=0.002193 Jy/beam
! Clean residual mean=0.000006 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.403168 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 88 components and 0.403168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078769Jy  sigma=1.182464
! Fit after  self-cal, rms=0.078764Jy  sigma=1.182396
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078764Jy  sigma=1.182396
! Fit after  self-cal, rms=0.078951Jy  sigma=1.182082
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.091 mas, bmaj=4.534 mas, bpa=-0.6377 degrees
! Estimated noise=0.440896 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000433672 Jy
! Component: 100  -  total flux cleaned = 0.00069019 Jy
! Component: 150  -  total flux cleaned = 0.000886346 Jy
! Component: 200  -  total flux cleaned = 0.000991096 Jy
! Total flux subtracted in 200 components = 0.000991096 Jy
! Clean residual min=-0.002249 max=0.002625 Jy/beam
! Clean residual mean=0.000012 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.404159 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 100 components and 0.404159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078936Jy  sigma=1.181852
! Fit after  self-cal, rms=0.078934Jy  sigma=1.181755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.68386e-05 Jy
! Component: 100  -  total flux cleaned = 0.000100129 Jy
! Component: 150  -  total flux cleaned = 0.00014492 Jy
! Component: 200  -  total flux cleaned = 0.000162989 Jy
! Total flux subtracted in 200 components = 0.000162989 Jy
! Clean residual min=-0.002171 max=0.002522 Jy/beam
! Clean residual mean=0.000012 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.404322 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 107 components and 0.404322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078930Jy  sigma=1.181732
! Fit after  self-cal, rms=0.078928Jy  sigma=1.181706
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7764 mas, bmaj=1.949 mas, bpa=-5.983 degrees
! Estimated noise=0.322095 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7764 x 1.949 at -5.983 degrees (North through East)
! Clean map  min=-0.002359  max=0.37223 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6068 mas, bmaj=1.597 mas, bpa=-6.392 degrees
! Estimated noise=0.545694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.292233 Jy
! Component: 100  -  total flux cleaned = 0.356149 Jy
! Component: 150  -  total flux cleaned = 0.374803 Jy
! Component: 200  -  total flux cleaned = 0.384762 Jy
! Total flux subtracted in 200 components = 0.384762 Jy
! Clean residual min=-0.004118 max=0.005083 Jy/beam
! Clean residual mean=0.000004 rms=0.000921 Jy/beam
! Combined flux in latest and established models = 0.384762 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.384762 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7764 mas, bmaj=1.949 mas, bpa=-5.983 degrees
! Estimated noise=0.322095 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00817528 Jy
! Component: 100  -  total flux cleaned = 0.0128845 Jy
! Component: 150  -  total flux cleaned = 0.0159442 Jy
! Component: 200  -  total flux cleaned = 0.0171015 Jy
! Total flux subtracted in 200 components = 0.0171015 Jy
! Clean residual min=-0.002039 max=0.002333 Jy/beam
! Clean residual mean=0.000005 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.401864 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 33 components and 0.401864 Jy
! Inverting map 
! Added new window around map position (1.2, -14).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0019785 Jy
! Component: 100  -  total flux cleaned = 0.00250337 Jy
! Component: 150  -  total flux cleaned = 0.0026792 Jy
! Component: 200  -  total flux cleaned = 0.00273433 Jy
! Total flux subtracted in 200 components = 0.00273433 Jy
! Clean residual min=-0.001890 max=0.002189 Jy/beam
! Clean residual mean=0.000005 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.404598 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 55 components and 0.404598 Jy
! Inverting map 
! Added new window around map position (16.2, 30.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162231 Jy
! Component: 100  -  total flux cleaned = 0.00208141 Jy
! Component: 150  -  total flux cleaned = 0.00217365 Jy
! Component: 200  -  total flux cleaned = 0.00229744 Jy
! Total flux subtracted in 200 components = 0.00229744 Jy
! Clean residual min=-0.001811 max=0.002059 Jy/beam
! Clean residual mean=0.000003 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.406896 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 70 components and 0.406896 Jy
! Inverting map 
! Added new window around map position (-5.2, 31.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173561 Jy
! Component: 100  -  total flux cleaned = 0.0019465 Jy
! Component: 150  -  total flux cleaned = 0.00205881 Jy
! Component: 200  -  total flux cleaned = 0.00205733 Jy
! Total flux subtracted in 200 components = 0.00205733 Jy
! Clean residual min=-0.001726 max=0.001899 Jy/beam
! Clean residual mean=0.000002 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.408953 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 89 components and 0.408953 Jy
! Inverting map 
! Added new window around map position (-8.6, 4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173926 Jy
! Component: 100  -  total flux cleaned = 0.00198813 Jy
! Component: 150  -  total flux cleaned = 0.00223838 Jy
! Component: 200  -  total flux cleaned = 0.00250193 Jy
! Total flux subtracted in 200 components = 0.00250193 Jy
! Clean residual min=-0.001654 max=0.001494 Jy/beam
! Clean residual mean=0.000003 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.411455 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 100 components and 0.411455 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.091 mas, bmaj=4.534 mas, bpa=-0.6377 degrees
! Estimated noise=0.440896 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176042 Jy
! Component: 100  -  total flux cleaned = 0.000779517 Jy
! Component: 150  -  total flux cleaned = 0.00130498 Jy
! Component: 200  -  total flux cleaned = 0.00176629 Jy
! Total flux subtracted in 200 components = 0.00176629 Jy
! Clean residual min=-0.001774 max=0.001647 Jy/beam
! Clean residual mean=0.000007 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.413221 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000385298 Jy
! Component: 100  -  total flux cleaned = 0.000580717 Jy
! Component: 150  -  total flux cleaned = 0.000700877 Jy
! Component: 200  -  total flux cleaned = 0.000776918 Jy
! Total flux subtracted in 200 components = 0.000776918 Jy
! Clean residual min=-0.001743 max=0.001565 Jy/beam
! Clean residual mean=0.000007 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.413998 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 124 components and 0.413998 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7764 mas, bmaj=1.949 mas, bpa=-5.983 degrees
! Estimated noise=0.322095 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000202003 Jy
! Component: 100  -  total flux cleaned = -0.000301267 Jy
! Component: 150  -  total flux cleaned = -0.000424048 Jy
! Component: 200  -  total flux cleaned = -0.000482011 Jy
! Total flux subtracted in 200 components = -0.000482011 Jy
! Clean residual min=-0.001440 max=0.001561 Jy/beam
! Clean residual mean=0.000003 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.413516 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 138 components and 0.413516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078729Jy  sigma=1.177980
! Fit after  self-cal, rms=0.078718Jy  sigma=1.177655
wmodel J0352-2514_X_map.mod
! Writing 138 model components to file: J0352-2514_X_map.mod
wobs   J0352-2514_X_uvs.fits
! Writing UV FITS file: J0352-2514_X_uvs.fits
wwins  J0352-2514_X_map.win
! wwins: Wrote 7 windows to J0352-2514_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000230857 Jy
! Component: 100  -  total flux cleaned = 8.26378e-05 Jy
! Component: 150  -  total flux cleaned = 5.88793e-05 Jy
! Component: 200  -  total flux cleaned = 8.14981e-05 Jy
! Component: 250  -  total flux cleaned = 5.95873e-05 Jy
! Component: 300  -  total flux cleaned = 0.000146386 Jy
! Component: 350  -  total flux cleaned = 0.000188713 Jy
! Component: 400  -  total flux cleaned = 0.000209692 Jy
! Component: 450  -  total flux cleaned = 0.000189545 Jy
! Component: 500  -  total flux cleaned = 0.000189721 Jy
! Component: 550  -  total flux cleaned = 0.000150664 Jy
! Component: 600  -  total flux cleaned = 5.38283e-05 Jy
! Component: 650  -  total flux cleaned = 1.57327e-05 Jy
! Component: 700  -  total flux cleaned = 1.54354e-05 Jy
! Component: 750  -  total flux cleaned = -7.78514e-05 Jy
! Component: 800  -  total flux cleaned = -0.000261621 Jy
! Component: 850  -  total flux cleaned = -0.00029771 Jy
! Component: 900  -  total flux cleaned = -0.000387115 Jy
! Component: 950  -  total flux cleaned = -0.000404787 Jy
! Component: 1000  -  total flux cleaned = -0.000527085 Jy
! Component: 1050  -  total flux cleaned = -0.00057899 Jy
! Component: 1100  -  total flux cleaned = -0.000613117 Jy
! Component: 1150  -  total flux cleaned = -0.000646716 Jy
! Component: 1200  -  total flux cleaned = -0.000663552 Jy
! Component: 1250  -  total flux cleaned = -0.00074622 Jy
! Component: 1300  -  total flux cleaned = -0.000827742 Jy
! Component: 1350  -  total flux cleaned = -0.000892045 Jy
! Component: 1400  -  total flux cleaned = -0.000924014 Jy
! Component: 1450  -  total flux cleaned = -0.000923728 Jy
! Component: 1500  -  total flux cleaned = -0.000986113 Jy
! Component: 1550  -  total flux cleaned = -0.000955187 Jy
! Component: 1600  -  total flux cleaned = -0.00100128 Jy
! Component: 1650  -  total flux cleaned = -0.00103162 Jy
! Component: 1700  -  total flux cleaned = -0.00107695 Jy
! Component: 1750  -  total flux cleaned = -0.00104716 Jy
! Component: 1800  -  total flux cleaned = -0.00112144 Jy
! Component: 1850  -  total flux cleaned = -0.00115088 Jy
! Component: 1900  -  total flux cleaned = -0.00120934 Jy
! Component: 1950  -  total flux cleaned = -0.00122359 Jy
! Component: 2000  -  total flux cleaned = -0.00123794 Jy
! Component: 2050  -  total flux cleaned = -0.00122354 Jy
! Component: 2100  -  total flux cleaned = -0.00122355 Jy
! Component: 2150  -  total flux cleaned = -0.00127964 Jy
! Component: 2200  -  total flux cleaned = -0.0013074 Jy
! Component: 2250  -  total flux cleaned = -0.00126613 Jy
! Component: 2300  -  total flux cleaned = -0.00126614 Jy
! Component: 2350  -  total flux cleaned = -0.00130699 Jy
! Component: 2400  -  total flux cleaned = -0.00126648 Jy
! Component: 2450  -  total flux cleaned = -0.00130666 Jy
! Component: 2500  -  total flux cleaned = -0.00128005 Jy
! Component: 2550  -  total flux cleaned = -0.00124048 Jy
! Component: 2600  -  total flux cleaned = -0.00125357 Jy
! Component: 2650  -  total flux cleaned = -0.00126682 Jy
! Component: 2700  -  total flux cleaned = -0.00127957 Jy
! Component: 2750  -  total flux cleaned = -0.00127968 Jy
! Component: 2800  -  total flux cleaned = -0.00130513 Jy
! Component: 2850  -  total flux cleaned = -0.00127968 Jy
! Component: 2900  -  total flux cleaned = -0.00125466 Jy
! Component: 2950  -  total flux cleaned = -0.00131719 Jy
! Component: 3000  -  total flux cleaned = -0.00124268 Jy
! Component: 3050  -  total flux cleaned = -0.00123041 Jy
! Component: 3100  -  total flux cleaned = -0.00123054 Jy
! Component: 3150  -  total flux cleaned = -0.00126726 Jy
! Component: 3200  -  total flux cleaned = -0.00130373 Jy
! Component: 3250  -  total flux cleaned = -0.00130371 Jy
! Component: 3300  -  total flux cleaned = -0.00135159 Jy
! Component: 3350  -  total flux cleaned = -0.0013516 Jy
! Component: 3400  -  total flux cleaned = -0.00135147 Jy
! Component: 3450  -  total flux cleaned = -0.00132798 Jy
! Component: 3500  -  total flux cleaned = -0.00135139 Jy
! Component: 3550  -  total flux cleaned = -0.00132808 Jy
! Component: 3600  -  total flux cleaned = -0.00137441 Jy
! Component: 3650  -  total flux cleaned = -0.00139748 Jy
! Component: 3700  -  total flux cleaned = -0.00143173 Jy
! Component: 3750  -  total flux cleaned = -0.00139767 Jy
! Component: 3800  -  total flux cleaned = -0.00142034 Jy
! Component: 3850  -  total flux cleaned = -0.00143163 Jy
! Component: 3900  -  total flux cleaned = -0.00143162 Jy
! Component: 3950  -  total flux cleaned = -0.00146493 Jy
! Component: 4000  -  total flux cleaned = -0.00149823 Jy
! Component: 4050  -  total flux cleaned = -0.00150924 Jy
! Total flux subtracted in 4096 components = -0.00155299 Jy
! Clean residual min=-0.000691 max=0.000695 Jy/beam
! Clean residual mean=-0.000000 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.411963 Jy
keep
! Adding 277 model components to the UV plane model.
! The established model now contains 415 components and 0.411963 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0352-2514_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7764 x 1.949 at -5.983 degrees (North through East)
! Clean map  min=-0.00097419  max=0.37194 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0352-2514_X_map.fits
wmodel /vlbi/uf001/uva//J0352-2514_X_map.mod
! Writing 415 model components to file: /vlbi/uf001/uva//J0352-2514_X_map.mod
wobs   /vlbi/uf001/uva//J0352-2514_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0352-2514_X_uvs.fits
wwins  /vlbi/uf001/uva//J0352-2514_X_map.win
! wwins: Wrote 8 windows to /vlbi/uf001/uva//J0352-2514_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.371943 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000186812 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.150678 0.150678 0.301357 0.602713 1.20543 2.41085 4.8217 9.64341 19.2868 38.5736 77.1473
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.371 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1991 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0352-2514_X_dfm.log closed on Sun Jan 13 21:56:54 2019