! Started logfile: /vlbi/uf001/uvm//J0348-2749_X_b_dfm.log on Sun Jan 13 20:42:10 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0348-2749_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0348-2749_X_b_uvm.fits ! AN table 1: 7 integrations on 21 of 21 possible baselines. ! AN table 2: 12 integrations on 21 of 21 possible baselines. ! AN table 3: 7 integrations on 28 of 28 possible baselines. ! AN table 4: 14 integrations on 21 of 21 possible baselines. ! AN table 5: 8 integrations on 1 of 1 possible baselines. ! AN table 6: 21 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.781145 visibilities/baseline/integration-bin. ! Found source: J0348-2749 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 13920 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0348-2749_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 45 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 61 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 88 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 45 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 61 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 88 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 45 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 61 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 88 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 45 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 61 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 88 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 5. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 45 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 61 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 88 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 6. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 45 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 61 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 88 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 7. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 45 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 61 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 88 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 8. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 45 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 61 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 88 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 9. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 45 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 61 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 88 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 10. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 45 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 61 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 88 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 11. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 45 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 61 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 88 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 12. ! A total of 23 telescope corrections were flagged in sub-array 1. ! A total of 45 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 61 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 88 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.165566Jy sigma=17.653780 ! Fit after self-cal, rms=0.443393Jy sigma=6.316710 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.772 mas, bmaj=3.299 mas, bpa=-7.88 degrees ! Estimated noise=0.817461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.440877 Jy ! Component: 100 - total flux cleaned = 0.543887 Jy ! Total flux subtracted in 100 components = 0.543887 Jy ! Clean residual min=-0.022947 max=0.072545 Jy/beam ! Clean residual mean=0.000109 rms=0.006185 Jy/beam ! Combined flux in latest and established models = 0.543887 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.543887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.175076Jy sigma=2.540332 ! Fit after self-cal, rms=0.175045Jy sigma=2.539749 ! Inverting map ! Added new window around map position (1.6, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0652529 Jy ! Component: 100 - total flux cleaned = 0.102966 Jy ! Total flux subtracted in 100 components = 0.102966 Jy ! Clean residual min=-0.020964 max=0.058923 Jy/beam ! Clean residual mean=0.000060 rms=0.004791 Jy/beam ! Combined flux in latest and established models = 0.646853 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.646853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141302Jy sigma=1.989566 ! Fit after self-cal, rms=0.138342Jy sigma=1.934561 ! Inverting map ! Added new window around map position (-1.6, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.04319 Jy ! Component: 100 - total flux cleaned = 0.0677086 Jy ! Total flux subtracted in 100 components = 0.0677086 Jy ! Clean residual min=-0.017705 max=0.021737 Jy/beam ! Clean residual mean=0.000028 rms=0.003822 Jy/beam ! Combined flux in latest and established models = 0.714561 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.714561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121982Jy sigma=1.681237 ! Fit after self-cal, rms=0.121799Jy sigma=1.678993 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=3.87 mas, bpa=-4.753 degrees ! Estimated noise=0.540385 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234567 Jy ! Component: 100 - total flux cleaned = 0.0380554 Jy ! Component: 150 - total flux cleaned = 0.0455358 Jy ! Component: 200 - total flux cleaned = 0.0493424 Jy ! Total flux subtracted in 200 components = 0.0493424 Jy ! Clean residual min=-0.015720 max=0.017798 Jy/beam ! Clean residual mean=0.000050 rms=0.003696 Jy/beam ! Combined flux in latest and established models = 0.763904 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 65 components and 0.763904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116977Jy sigma=1.587413 ! Fit after self-cal, rms=0.116808Jy sigma=1.584659 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.05 x 3.87 at -4.753 degrees (North through East) ! Clean map min=-0.015225 max=0.55946 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 1.08 KP 0.98 LA 0.94 ! NL 1.00 PT 0.95 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 1.05 KP 0.97 LA 1.05 ! MK 0.89 OV 0.95 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.27 HN 1.07 KP 1.02 LA 0.97 ! NL 1.06 OV 0.92 PT 0.99 SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.96 HN 1.45 KP 0.99 LA 0.96 ! NL 1.00 OV 0.85 PT 0.91 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.94 FD 1.03 HN 1.29 KP 1.06 ! LA 1.06 MK 1.00 NL 0.99 OV 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 1.10 KP 1.03 LA 0.91 ! NL 1.07 PT 0.96 SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.09 KP 1.00 LA 1.02 ! MK 0.89 OV 0.91 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.30 HN 1.10 KP 1.02 LA 0.95 ! NL 1.05 OV 0.94 PT 1.00 SC 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.95 HN 1.38 KP 0.99 LA 0.98 ! NL 1.03 OV 0.88 PT 0.91 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.94 FD 1.02 HN 1.35 KP 1.03 ! LA 1.05 MK 1.00 NL 1.04 OV 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.05 KP 1.00 LA 0.93 ! NL 1.10 PT 0.92 SC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.10 KP 0.97 LA 0.99 ! MK 0.90 OV 0.97 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.28 HN 1.12 KP 1.00 LA 0.97 ! NL 1.07 OV 0.93 PT 0.98 SC 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.98 HN 1.50 KP 1.01 LA 0.96 ! NL 1.02 OV 0.87 PT 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.96 FD 1.04 HN 1.31 KP 1.03 ! LA 1.04 MK 1.03 NL 1.05 OV 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.15 KP 1.01 LA 0.98 ! NL 1.04 PT 0.93 SC 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.10 KP 1.00 LA 1.03 ! MK 0.91 OV 0.93 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.29 HN 1.07 KP 1.04 LA 0.97 ! NL 1.08 OV 0.93 PT 0.95 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.96 HN 1.62 KP 0.99 LA 0.96 ! NL 1.02 OV 0.87 PT 0.91 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.96 FD 1.04 HN 1.27 KP 1.05 ! LA 1.03 MK 1.04 NL 1.04 OV 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 1.03 KP 0.99 LA 0.94 ! NL 1.06 PT 0.93 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.08 KP 1.01 LA 1.01 ! MK 0.90 OV 0.92 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.32 HN 1.08 KP 1.03 LA 0.97 ! NL 1.09 OV 0.91 PT 0.99 SC 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 HN 1.79 KP 0.99 LA 0.99 ! NL 1.02 OV 0.86 PT 0.89 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.95 FD 1.02 HN 1.35 KP 1.06 ! LA 1.04 MK 1.02 NL 1.04 OV 0.90 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.07 KP 1.02 LA 0.95 ! NL 1.03 PT 0.92 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.11 KP 0.99 LA 1.04 ! MK 0.88 OV 0.93 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.29 HN 1.04 KP 1.02 LA 0.99 ! NL 1.05 OV 0.96 PT 0.96 SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 HN 1.50 KP 0.99 LA 0.97 ! NL 1.02 OV 0.88 PT 0.90 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.89 FD 1.02 HN 1.34 KP 1.04 ! LA 1.04 MK 1.03 NL 1.03 OV 0.91 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 HN 1.12 KP 1.00 LA 0.95 ! NL 1.01 PT 0.96 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.08 KP 1.00 LA 1.01 ! MK 0.90 OV 0.95 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.28 HN 1.06 KP 1.02 LA 0.97 ! NL 1.07 OV 0.94 PT 0.96 SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.95 HN 1.51 KP 0.99 LA 0.98 ! NL 1.04 OV 0.88 PT 0.91 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.96 FD 1.01 HN 1.43 KP 1.06 ! LA 1.06 MK 1.02 NL 1.00 OV 0.90 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.06 KP 1.03 LA 0.96 ! NL 1.01 PT 0.92 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 1.09 KP 0.99 LA 1.03 ! MK 0.91 OV 0.93 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.28 HN 1.09 KP 1.02 LA 0.98 ! NL 1.04 OV 0.92 PT 1.00 SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 HN 1.48 KP 1.02 LA 0.97 ! NL 1.03 OV 0.84 PT 0.90 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.93 FD 1.02 HN 1.28 KP 1.06 ! LA 1.02 MK 1.04 NL 1.07 OV 0.90 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.09 KP 0.98 LA 0.95 ! NL 1.04 PT 0.94 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.06 KP 0.97 LA 1.01 ! MK 0.93 OV 0.93 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.35 HN 1.10 KP 1.00 LA 0.97 ! NL 1.03 OV 0.94 PT 0.98 SC 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.94 HN 1.40 KP 1.01 LA 0.98 ! NL 0.98 OV 0.85 PT 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.95 FD 1.04 HN 1.33 KP 1.04 ! LA 1.03 MK 1.04 NL 1.04 OV 0.91 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.14 KP 0.99 LA 0.95 ! NL 1.02 PT 0.93 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 1.07 KP 1.02 LA 1.03 ! MK 0.92 OV 0.90 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.37 HN 1.11 KP 1.01 LA 0.96 ! NL 1.09 OV 0.91 PT 0.98 SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.95 HN 1.48 KP 1.01 LA 0.97 ! NL 1.02 OV 0.85 PT 0.90 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.93 FD 1.03 HN 1.34 KP 1.04 ! LA 1.05 MK 1.03 NL 1.04 OV 0.91 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.09 KP 0.98 LA 0.92 ! NL 1.03 PT 0.97 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.09 KP 1.00 LA 1.01 ! MK 0.90 OV 0.93 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.29 HN 1.06 KP 1.02 LA 0.96 ! NL 1.07 OV 0.93 PT 0.98 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 HN 1.60 KP 1.01 LA 0.97 ! NL 0.98 OV 0.86 PT 0.90 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.95 FD 1.01 HN 1.30 KP 1.04 ! LA 1.04 MK 1.04 NL 1.01 OV 0.91 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.08 KP 0.79 LA 0.96 ! NL 1.04 PT 0.98 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.05 KP 0.97 LA 1.07 ! MK 0.90 OV 0.91 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.29 HN 1.09 KP 0.97 LA 0.94 ! NL 1.01 OV 0.94 PT 0.97 SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.97 HN 1.64 KP 0.98 LA 0.96 ! NL 1.00 OV 0.83 PT 0.88 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.94 FD 1.02 HN 1.38 KP 1.04 ! LA 1.04 MK 1.04 NL 1.02 OV 0.89 ! ! ! Fit before self-cal, rms=0.116808Jy sigma=1.584659 ! Fit after self-cal, rms=0.099592Jy sigma=1.195078 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.062 mas, bmaj=3.865 mas, bpa=-4.429 degrees ! Estimated noise=0.547141 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00935526 Jy ! Component: 100 - total flux cleaned = 0.00941566 Jy ! Component: 150 - total flux cleaned = 0.00882198 Jy ! Component: 200 - total flux cleaned = 0.00856928 Jy ! Total flux subtracted in 200 components = 0.00856928 Jy ! Clean residual min=-0.010326 max=0.006629 Jy/beam ! Clean residual mean=0.000104 rms=0.001714 Jy/beam ! Combined flux in latest and established models = 0.772473 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 90 components and 0.772473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096606Jy sigma=1.144879 ! Fit after self-cal, rms=0.096695Jy sigma=1.142132 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096695Jy sigma=1.142132 ! Fit after self-cal, rms=0.094965Jy sigma=1.109216 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.065 mas, bmaj=3.864 mas, bpa=-4.425 degrees ! Estimated noise=0.546207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00308655 Jy ! Component: 100 - total flux cleaned = -0.00337817 Jy ! Component: 150 - total flux cleaned = -0.00316651 Jy ! Component: 200 - total flux cleaned = -0.0033598 Jy ! Total flux subtracted in 200 components = -0.0033598 Jy ! Clean residual min=-0.008764 max=0.005510 Jy/beam ! Clean residual mean=0.000095 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.769113 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 102 components and 0.769113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093675Jy sigma=1.087688 ! Fit after self-cal, rms=0.093663Jy sigma=1.087178 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165153 Jy ! Component: 100 - total flux cleaned = 1.68592e-05 Jy ! Component: 150 - total flux cleaned = -0.000250128 Jy ! Component: 200 - total flux cleaned = -0.000494807 Jy ! Total flux subtracted in 200 components = -0.000494807 Jy ! Clean residual min=-0.008097 max=0.005429 Jy/beam ! Clean residual mean=0.000097 rms=0.001384 Jy/beam ! Combined flux in latest and established models = 0.768619 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 113 components and 0.768619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093282Jy sigma=1.079432 ! Fit after self-cal, rms=0.093262Jy sigma=1.079230 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093262Jy sigma=1.079230 ! Fit after self-cal, rms=0.092874Jy sigma=1.045117 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.068 mas, bmaj=3.867 mas, bpa=-4.388 degrees ! Estimated noise=0.546419 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00638118 Jy ! Component: 100 - total flux cleaned = -0.00705667 Jy ! Component: 150 - total flux cleaned = -0.00692378 Jy ! Component: 200 - total flux cleaned = -0.00692342 Jy ! Total flux subtracted in 200 components = -0.00692342 Jy ! Clean residual min=-0.006774 max=0.004216 Jy/beam ! Clean residual mean=0.000094 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.761695 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 127 components and 0.761695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092191Jy sigma=1.034980 ! Fit after self-cal, rms=0.092209Jy sigma=1.034784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260759 Jy ! Component: 100 - total flux cleaned = 0.000258459 Jy ! Component: 150 - total flux cleaned = 0.000345579 Jy ! Component: 200 - total flux cleaned = 0.000428463 Jy ! Total flux subtracted in 200 components = 0.000428463 Jy ! Clean residual min=-0.006343 max=0.004209 Jy/beam ! Clean residual mean=0.000092 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.762123 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 141 components and 0.762123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092039Jy sigma=1.031612 ! Fit after self-cal, rms=0.092030Jy sigma=1.031503 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092030Jy sigma=1.031503 ! Fit after self-cal, rms=0.092591Jy sigma=1.027314 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.249 mas, bmaj=5.65 mas, bpa=2.572 degrees ! Estimated noise=0.63864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00450572 Jy ! Component: 100 - total flux cleaned = -0.00563593 Jy ! Component: 150 - total flux cleaned = -0.00579094 Jy ! Component: 200 - total flux cleaned = -0.00579395 Jy ! Total flux subtracted in 200 components = -0.00579395 Jy ! Clean residual min=-0.006632 max=0.004811 Jy/beam ! Clean residual mean=0.000137 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.756329 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 161 components and 0.756329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092359Jy sigma=1.023231 ! Fit after self-cal, rms=0.092361Jy sigma=1.023174 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.00589e-05 Jy ! Component: 100 - total flux cleaned = -0.000122994 Jy ! Component: 150 - total flux cleaned = -0.000123139 Jy ! Component: 200 - total flux cleaned = -0.000172996 Jy ! Total flux subtracted in 200 components = -0.000172996 Jy ! Clean residual min=-0.006439 max=0.004791 Jy/beam ! Clean residual mean=0.000138 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 0.756156 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 170 components and 0.756156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092279Jy sigma=1.021805 ! Fit after self-cal, rms=0.092279Jy sigma=1.021770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.069 mas, bmaj=3.867 mas, bpa=-4.351 degrees ! Estimated noise=0.546677 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.069 x 3.867 at -4.351 degrees (North through East) ! Clean map min=-0.0056869 max=0.5753 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092279Jy sigma=1.021770 ! Fit after self-cal, rms=0.088967Jy sigma=0.935440 ! Inverting map and beam ! Estimated beam: bmin=1.07 mas, bmaj=3.865 mas, bpa=-4.319 degrees ! Estimated noise=0.546226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00419646 Jy ! Component: 100 - total flux cleaned = -0.0047291 Jy ! Component: 150 - total flux cleaned = -0.00481152 Jy ! Component: 200 - total flux cleaned = -0.00481237 Jy ! Total flux subtracted in 200 components = -0.00481237 Jy ! Clean residual min=-0.004723 max=0.003797 Jy/beam ! Clean residual mean=0.000071 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.751344 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 176 components and 0.751344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088670Jy sigma=0.930558 ! Fit after self-cal, rms=0.088668Jy sigma=0.930490 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319448 Jy ! Component: 100 - total flux cleaned = -0.000318432 Jy ! Component: 150 - total flux cleaned = -0.000376778 Jy ! Component: 200 - total flux cleaned = -0.000320888 Jy ! Total flux subtracted in 200 components = -0.000320888 Jy ! Clean residual min=-0.004594 max=0.003706 Jy/beam ! Clean residual mean=0.000072 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.751023 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 185 components and 0.751023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088583Jy sigma=0.929003 ! Fit after self-cal, rms=0.088583Jy sigma=0.928967 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088583Jy sigma=0.928967 ! Fit after self-cal, rms=0.089110Jy sigma=0.926919 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7941 mas, bmaj=3.276 mas, bpa=-7.71 degrees ! Estimated noise=0.83952 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.452039 Jy ! Component: 100 - total flux cleaned = 0.558267 Jy ! Component: 150 - total flux cleaned = 0.604882 Jy ! Component: 200 - total flux cleaned = 0.635513 Jy ! Total flux subtracted in 200 components = 0.635513 Jy ! Clean residual min=-0.007928 max=0.016961 Jy/beam ! Clean residual mean=0.000074 rms=0.002117 Jy/beam ! Combined flux in latest and established models = 0.635513 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.635513 Jy ! Inverting map and beam ! Estimated beam: bmin=1.07 mas, bmaj=3.864 mas, bpa=-4.304 degrees ! Estimated noise=0.546362 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0349233 Jy ! Component: 100 - total flux cleaned = 0.0574316 Jy ! Component: 150 - total flux cleaned = 0.0731735 Jy ! Component: 200 - total flux cleaned = 0.0844177 Jy ! Total flux subtracted in 200 components = 0.0844177 Jy ! Clean residual min=-0.005422 max=0.006373 Jy/beam ! Clean residual mean=0.000153 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 0.719931 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 65 components and 0.719931 Jy ! Inverting map ! Added new window around map position (0.8, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00822522 Jy ! Component: 100 - total flux cleaned = 0.0142554 Jy ! Component: 150 - total flux cleaned = 0.0187733 Jy ! Component: 200 - total flux cleaned = 0.0219738 Jy ! Total flux subtracted in 200 components = 0.0219738 Jy ! Clean residual min=-0.004777 max=0.003181 Jy/beam ! Clean residual mean=0.000080 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.741904 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 95 components and 0.741904 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.258 mas, bmaj=5.654 mas, bpa=2.744 degrees ! Estimated noise=0.636974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278364 Jy ! Component: 100 - total flux cleaned = 0.00368583 Jy ! Component: 150 - total flux cleaned = 0.00445808 Jy ! Component: 200 - total flux cleaned = 0.00511138 Jy ! Total flux subtracted in 200 components = 0.00511138 Jy ! Clean residual min=-0.005017 max=0.003697 Jy/beam ! Clean residual mean=0.000112 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.747016 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000470097 Jy ! Component: 100 - total flux cleaned = 0.000706381 Jy ! Component: 150 - total flux cleaned = 0.000705782 Jy ! Component: 200 - total flux cleaned = 0.000671696 Jy ! Total flux subtracted in 200 components = 0.000671696 Jy ! Clean residual min=-0.004901 max=0.003792 Jy/beam ! Clean residual mean=0.000108 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.747687 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 155 components and 0.747687 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.07 mas, bmaj=3.864 mas, bpa=-4.304 degrees ! Estimated noise=0.546362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.77713e-05 Jy ! Component: 100 - total flux cleaned = -0.000194157 Jy ! Component: 150 - total flux cleaned = -0.000194983 Jy ! Component: 200 - total flux cleaned = -0.0001432 Jy ! Total flux subtracted in 200 components = -0.0001432 Jy ! Clean residual min=-0.004170 max=0.003614 Jy/beam ! Clean residual mean=0.000061 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.747544 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 168 components and 0.747544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089006Jy sigma=0.924111 ! Fit after self-cal, rms=0.089000Jy sigma=0.923589 wmodel J0348-2749_X_b_map.mod ! Writing 168 model components to file: J0348-2749_X_b_map.mod wobs J0348-2749_X_b_uvs.fits ! Writing UV FITS file: J0348-2749_X_b_uvs.fits wwins J0348-2749_X_b_map.win ! wwins: Wrote 5 windows to J0348-2749_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000964725 Jy ! Component: 100 - total flux cleaned = -0.0011952 Jy ! Component: 150 - total flux cleaned = -0.00119689 Jy ! Component: 200 - total flux cleaned = -0.00129567 Jy ! Component: 250 - total flux cleaned = -0.00139077 Jy ! Component: 300 - total flux cleaned = -0.00130098 Jy ! Component: 350 - total flux cleaned = -0.00104017 Jy ! Component: 400 - total flux cleaned = -0.000787527 Jy ! Component: 450 - total flux cleaned = -0.00058162 Jy ! Component: 500 - total flux cleaned = -0.000259277 Jy ! Component: 550 - total flux cleaned = -6.24204e-05 Jy ! Component: 600 - total flux cleaned = 0.000245922 Jy ! Component: 650 - total flux cleaned = 0.000586148 Jy ! Component: 700 - total flux cleaned = 0.000919406 Jy ! Component: 750 - total flux cleaned = 0.00128296 Jy ! Component: 800 - total flux cleaned = 0.00153279 Jy ! Component: 850 - total flux cleaned = 0.0018495 Jy ! Component: 900 - total flux cleaned = 0.00209112 Jy ! Component: 950 - total flux cleaned = 0.00232909 Jy ! Component: 1000 - total flux cleaned = 0.00249731 Jy ! Component: 1050 - total flux cleaned = 0.00273003 Jy ! Component: 1100 - total flux cleaned = 0.00302438 Jy ! Component: 1150 - total flux cleaned = 0.00321757 Jy ! Component: 1200 - total flux cleaned = 0.00347182 Jy ! Component: 1250 - total flux cleaned = 0.00369156 Jy ! Component: 1300 - total flux cleaned = 0.00384617 Jy ! Component: 1350 - total flux cleaned = 0.00406091 Jy ! Component: 1400 - total flux cleaned = 0.00421268 Jy ! Component: 1450 - total flux cleaned = 0.00439286 Jy ! Component: 1500 - total flux cleaned = 0.00454116 Jy ! Component: 1550 - total flux cleaned = 0.00468799 Jy ! Component: 1600 - total flux cleaned = 0.00483368 Jy ! Component: 1650 - total flux cleaned = 0.00500653 Jy ! Component: 1700 - total flux cleaned = 0.00509185 Jy ! Component: 1750 - total flux cleaned = 0.00520475 Jy ! Component: 1800 - total flux cleaned = 0.00531668 Jy ! Component: 1850 - total flux cleaned = 0.00542775 Jy ! Component: 1900 - total flux cleaned = 0.00553744 Jy ! Component: 1950 - total flux cleaned = 0.0056459 Jy ! Component: 2000 - total flux cleaned = 0.00569955 Jy ! Component: 2050 - total flux cleaned = 0.00577988 Jy ! Component: 2100 - total flux cleaned = 0.00588572 Jy ! Component: 2150 - total flux cleaned = 0.00591194 Jy ! Component: 2200 - total flux cleaned = 0.00599 Jy ! Component: 2250 - total flux cleaned = 0.00604161 Jy ! Component: 2300 - total flux cleaned = 0.00601581 Jy ! Component: 2350 - total flux cleaned = 0.00604115 Jy ! Component: 2400 - total flux cleaned = 0.00611686 Jy ! Component: 2450 - total flux cleaned = 0.00606673 Jy ! Component: 2500 - total flux cleaned = 0.00619128 Jy ! Component: 2550 - total flux cleaned = 0.00621614 Jy ! Component: 2600 - total flux cleaned = 0.00631435 Jy ! Component: 2650 - total flux cleaned = 0.00631434 Jy ! Component: 2700 - total flux cleaned = 0.00638647 Jy ! Component: 2750 - total flux cleaned = 0.00638662 Jy ! Component: 2800 - total flux cleaned = 0.00643429 Jy ! Component: 2850 - total flux cleaned = 0.00652906 Jy ! Component: 2900 - total flux cleaned = 0.00655275 Jy ! Component: 2950 - total flux cleaned = 0.00659949 Jy ! Component: 3000 - total flux cleaned = 0.00657628 Jy ! Component: 3050 - total flux cleaned = 0.00666854 Jy ! Component: 3100 - total flux cleaned = 0.00666846 Jy ! Component: 3150 - total flux cleaned = 0.00671401 Jy ! Component: 3200 - total flux cleaned = 0.00682712 Jy ! Component: 3250 - total flux cleaned = 0.00680454 Jy ! Component: 3300 - total flux cleaned = 0.0069161 Jy ! Component: 3350 - total flux cleaned = 0.0069382 Jy ! Component: 3400 - total flux cleaned = 0.0069602 Jy ! Component: 3450 - total flux cleaned = 0.00711361 Jy ! Component: 3500 - total flux cleaned = 0.00711356 Jy ! Component: 3550 - total flux cleaned = 0.00711353 Jy ! Component: 3600 - total flux cleaned = 0.0072858 Jy ! Component: 3650 - total flux cleaned = 0.00730712 Jy ! Component: 3700 - total flux cleaned = 0.00734947 Jy ! Component: 3750 - total flux cleaned = 0.00739196 Jy ! Component: 3800 - total flux cleaned = 0.00745501 Jy ! Component: 3850 - total flux cleaned = 0.00755977 Jy ! Component: 3900 - total flux cleaned = 0.00755983 Jy ! Component: 3950 - total flux cleaned = 0.00758048 Jy ! Component: 4000 - total flux cleaned = 0.00764243 Jy ! Component: 4050 - total flux cleaned = 0.00772441 Jy ! Total flux subtracted in 4096 components = 0.00780609 Jy ! Clean residual min=-0.001231 max=0.001104 Jy/beam ! Clean residual mean=0.000038 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.75535 Jy keep ! Adding 349 model components to the UV plane model. ! The established model now contains 517 components and 0.75535 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0348-2749_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.07 x 3.864 at -4.304 degrees (North through East) ! Clean map min=-0.0031736 max=0.58104 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0348-2749_X_b_map.fits wmodel /vlbi/uf001/uvm//J0348-2749_X_b_map.mod ! Writing 517 model components to file: /vlbi/uf001/uvm//J0348-2749_X_b_map.mod wobs /vlbi/uf001/uvm//J0348-2749_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0348-2749_X_b_uvs.fits wwins /vlbi/uf001/uvm//J0348-2749_X_b_map.win ! wwins: Wrote 6 windows to /vlbi/uf001/uvm//J0348-2749_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.581044 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000380982 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.196706 0.196706 0.393411 0.786822 1.57364 3.14729 6.29458 12.5892 25.1783 50.3566 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.581 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1525.12 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0348-2749_X_b_dfm.log closed on Sun Jan 13 20:42:16 2019