! Started logfile: /vlbi/uf001/uva//J0348+4149_X_dfm.log on Sun Jan 13 21:55:24 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0348+4149_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0348+4149_X_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.97271 visibilities/baseline/integration-bin. ! Found source: J0348+4149 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 29940 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0348+4149_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.019329Jy sigma=25.141977 ! Fit after self-cal, rms=0.841962Jy sigma=20.740598 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7349 mas, bmaj=1.22 mas, bpa=-0.8799 degrees ! Estimated noise=0.348693 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115766 Jy ! Component: 100 - total flux cleaned = 0.147043 Jy ! Total flux subtracted in 100 components = 0.147043 Jy ! Clean residual min=-0.006218 max=0.015686 Jy/beam ! Clean residual mean=0.000011 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 0.147043 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.147043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066042Jy sigma=1.552690 ! Fit after self-cal, rms=0.066006Jy sigma=1.551936 ! Inverting map ! Added new window around map position (0.8, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170404 Jy ! Component: 100 - total flux cleaned = 0.0266568 Jy ! Total flux subtracted in 100 components = 0.0266568 Jy ! Clean residual min=-0.004666 max=0.005907 Jy/beam ! Clean residual mean=0.000006 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.173699 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.173699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059937Jy sigma=1.393526 ! Fit after self-cal, rms=0.059753Jy sigma=1.389384 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675899 Jy ! Component: 100 - total flux cleaned = 0.0109023 Jy ! Total flux subtracted in 100 components = 0.0109023 Jy ! Clean residual min=-0.003942 max=0.005418 Jy/beam ! Clean residual mean=0.000004 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.184602 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 0.184602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058606Jy sigma=1.360281 ! Fit after self-cal, rms=0.058556Jy sigma=1.359109 ! Inverting map ! Added new window around map position (1.6, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00491154 Jy ! Component: 100 - total flux cleaned = 0.00792454 Jy ! Total flux subtracted in 100 components = 0.00792454 Jy ! Clean residual min=-0.003487 max=0.005129 Jy/beam ! Clean residual mean=0.000003 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.192526 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.192526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058022Jy sigma=1.344901 ! Fit after self-cal, rms=0.057970Jy sigma=1.343840 ! Inverting map ! Added new window around map position (2.2, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00476329 Jy ! Component: 100 - total flux cleaned = 0.00757712 Jy ! Total flux subtracted in 100 components = 0.00757712 Jy ! Clean residual min=-0.003180 max=0.003665 Jy/beam ! Clean residual mean=0.000002 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.200103 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.200103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057511Jy sigma=1.330956 ! Fit after self-cal, rms=0.057476Jy sigma=1.330156 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9627 mas, bmaj=1.508 mas, bpa=-0.08992 degrees ! Estimated noise=0.174355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00497861 Jy ! Component: 100 - total flux cleaned = 0.0083171 Jy ! Component: 150 - total flux cleaned = 0.010887 Jy ! Component: 200 - total flux cleaned = 0.0124937 Jy ! Total flux subtracted in 200 components = 0.0124937 Jy ! Clean residual min=-0.002925 max=0.003395 Jy/beam ! Clean residual mean=0.000000 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.212597 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 52 components and 0.212597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056956Jy sigma=1.315103 ! Fit after self-cal, rms=0.056928Jy sigma=1.314479 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9627 x 1.508 at -0.08992 degrees (North through East) ! Clean map min=-0.0027954 max=0.15496 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.97 KP 1.01 ! LA 1.00 MK 0.99 NL 1.08 OV 0.92 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 0.96 KP 1.02 ! LA 1.00 MK 1.01 NL 1.07 OV 0.91 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.97 KP 1.01 ! LA 1.02 MK 1.01 NL 1.10 OV 0.92 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.96 KP 1.01 ! LA 1.03 MK 1.02 NL 1.07 OV 0.90 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.98 KP 1.02 ! LA 1.01 MK 1.03 NL 1.07 OV 0.92 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.98 KP 1.00 ! LA 1.02 MK 1.02 NL 1.07 OV 0.91 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.01 KP 1.00 ! LA 1.01 MK 1.06 NL 1.07 OV 0.91 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 0.97 KP 1.01 ! LA 1.02 MK 1.01 NL 1.06 OV 0.90 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.95 KP 0.99 ! LA 1.02 MK 1.03 NL 1.08 OV 0.91 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 0.96 KP 1.03 ! LA 1.02 MK 1.02 NL 1.07 OV 0.90 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 0.98 KP 1.00 ! LA 1.02 MK 1.01 NL 1.07 OV 0.92 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 1.00 KP 0.99 ! LA 1.02 MK 1.01 NL 1.06 OV 0.92 ! PT 0.95 SC 0.98 ! ! ! Fit before self-cal, rms=0.056928Jy sigma=1.314479 ! Fit after self-cal, rms=0.055433Jy sigma=1.284286 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9626 mas, bmaj=1.513 mas, bpa=0.2697 degrees ! Estimated noise=0.173861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00147091 Jy ! Component: 100 - total flux cleaned = -0.00159373 Jy ! Component: 150 - total flux cleaned = -0.00173257 Jy ! Component: 200 - total flux cleaned = -0.0018522 Jy ! Total flux subtracted in 200 components = -0.0018522 Jy ! Clean residual min=-0.001395 max=0.001451 Jy/beam ! Clean residual mean=0.000000 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.210745 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.210745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055300Jy sigma=1.280548 ! Fit after self-cal, rms=0.055315Jy sigma=1.280284 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055315Jy sigma=1.280284 ! Fit after self-cal, rms=0.055243Jy sigma=1.274917 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9628 mas, bmaj=1.512 mas, bpa=0.447 degrees ! Estimated noise=0.173841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000772011 Jy ! Component: 100 - total flux cleaned = -0.00120092 Jy ! Component: 150 - total flux cleaned = -0.0014592 Jy ! Component: 200 - total flux cleaned = -0.00168276 Jy ! Total flux subtracted in 200 components = -0.00168276 Jy ! Clean residual min=-0.001172 max=0.001178 Jy/beam ! Clean residual mean=-0.000000 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.209062 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 0.209062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055199Jy sigma=1.273790 ! Fit after self-cal, rms=0.055201Jy sigma=1.273728 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012438 Jy ! Component: 100 - total flux cleaned = -0.000239413 Jy ! Component: 150 - total flux cleaned = -0.000381874 Jy ! Component: 200 - total flux cleaned = -0.000436923 Jy ! Total flux subtracted in 200 components = -0.000436923 Jy ! Clean residual min=-0.001045 max=0.001128 Jy/beam ! Clean residual mean=-0.000000 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.208625 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 0.208625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055186Jy sigma=1.273329 ! Fit after self-cal, rms=0.055184Jy sigma=1.273305 ! Inverting map ! Added new window around map position (20, 14.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00064409 Jy ! Component: 100 - total flux cleaned = 0.000600058 Jy ! Component: 150 - total flux cleaned = 0.000581348 Jy ! Component: 200 - total flux cleaned = 0.000563373 Jy ! Total flux subtracted in 200 components = 0.000563373 Jy ! Clean residual min=-0.001000 max=0.001029 Jy/beam ! Clean residual mean=-0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.209189 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 103 components and 0.209189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055162Jy sigma=1.272788 ! Fit after self-cal, rms=0.055160Jy sigma=1.272772 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055160Jy sigma=1.272772 ! Fit after self-cal, rms=0.055086Jy sigma=1.272480 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9616 mas, bmaj=1.511 mas, bpa=0.5261 degrees ! Estimated noise=0.173767 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000568275 Jy ! Component: 100 - total flux cleaned = -0.000914827 Jy ! Component: 150 - total flux cleaned = -0.00103175 Jy ! Component: 200 - total flux cleaned = -0.00110155 Jy ! Total flux subtracted in 200 components = -0.00110155 Jy ! Clean residual min=-0.000967 max=0.001002 Jy/beam ! Clean residual mean=-0.000000 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.208087 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 109 components and 0.208087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055070Jy sigma=1.272047 ! Fit after self-cal, rms=0.055069Jy sigma=1.272042 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-38.8, 29.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000781149 Jy ! Component: 100 - total flux cleaned = 0.000763287 Jy ! Component: 150 - total flux cleaned = 0.00074579 Jy ! Component: 200 - total flux cleaned = 0.000745815 Jy ! Total flux subtracted in 200 components = 0.000745815 Jy ! Clean residual min=-0.000934 max=0.000988 Jy/beam ! Clean residual mean=-0.000001 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.208833 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 122 components and 0.208833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055053Jy sigma=1.271642 ! Fit after self-cal, rms=0.055052Jy sigma=1.271623 ! Inverting map ! Added new window around map position (49.4, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00088436 Jy ! Component: 100 - total flux cleaned = 0.00113094 Jy ! Component: 150 - total flux cleaned = 0.00126596 Jy ! Component: 200 - total flux cleaned = 0.00129741 Jy ! Total flux subtracted in 200 components = 0.00129741 Jy ! Clean residual min=-0.000887 max=0.000912 Jy/beam ! Clean residual mean=-0.000001 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.21013 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 133 components and 0.21013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055034Jy sigma=1.271203 ! Fit after self-cal, rms=0.055033Jy sigma=1.271190 ! Inverting map ! Added new window around map position (-29.6, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000460715 Jy ! Component: 100 - total flux cleaned = 0.000657218 Jy ! Component: 150 - total flux cleaned = 0.000752337 Jy ! Component: 200 - total flux cleaned = 0.000737602 Jy ! Total flux subtracted in 200 components = 0.000737602 Jy ! Clean residual min=-0.000885 max=0.000855 Jy/beam ! Clean residual mean=-0.000001 rms=0.000209 Jy/beam ! Combined flux in latest and established models = 0.210868 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 143 components and 0.210868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055016Jy sigma=1.270855 ! Fit after self-cal, rms=0.055016Jy sigma=1.270841 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055016Jy sigma=1.270841 ! Fit after self-cal, rms=0.054949Jy sigma=1.270698 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.155 mas, bmaj=2.562 mas, bpa=4.79 degrees ! Estimated noise=0.217985 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000422529 Jy ! Component: 100 - total flux cleaned = -0.000386366 Jy ! Component: 150 - total flux cleaned = -0.000299242 Jy ! Component: 200 - total flux cleaned = -0.000221804 Jy ! Total flux subtracted in 200 components = -0.000221804 Jy ! Clean residual min=-0.000888 max=0.000871 Jy/beam ! Clean residual mean=-0.000001 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.210646 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 168 components and 0.210646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054946Jy sigma=1.270575 ! Fit after self-cal, rms=0.054946Jy sigma=1.270563 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126403 Jy ! Component: 100 - total flux cleaned = 0.000191769 Jy ! Component: 150 - total flux cleaned = 0.000269393 Jy ! Component: 200 - total flux cleaned = 0.000296065 Jy ! Total flux subtracted in 200 components = 0.000296065 Jy ! Clean residual min=-0.000860 max=0.000846 Jy/beam ! Clean residual mean=-0.000001 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.210942 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 180 components and 0.210942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054946Jy sigma=1.270550 ! Fit after self-cal, rms=0.054946Jy sigma=1.270547 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9607 mas, bmaj=1.511 mas, bpa=0.5341 degrees ! Estimated noise=0.173635 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9607 x 1.511 at 0.5341 degrees (North through East) ! Clean map min=-0.00077804 max=0.155 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7337 mas, bmaj=1.22 mas, bpa=-0.3291 degrees ! Estimated noise=0.347792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115116 Jy ! Component: 100 - total flux cleaned = 0.147892 Jy ! Component: 150 - total flux cleaned = 0.165435 Jy ! Component: 200 - total flux cleaned = 0.175408 Jy ! Total flux subtracted in 200 components = 0.175408 Jy ! Clean residual min=-0.002998 max=0.005140 Jy/beam ! Clean residual mean=0.000004 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.175408 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.175408 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9607 mas, bmaj=1.511 mas, bpa=0.5341 degrees ! Estimated noise=0.173635 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00912638 Jy ! Component: 100 - total flux cleaned = 0.0146918 Jy ! Component: 150 - total flux cleaned = 0.0184405 Jy ! Component: 200 - total flux cleaned = 0.0212337 Jy ! Total flux subtracted in 200 components = 0.0212337 Jy ! Clean residual min=-0.001299 max=0.001724 Jy/beam ! Clean residual mean=0.000000 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.196642 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 41 components and 0.196642 Jy ! Inverting map ! Added new window around map position (2.2, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216558 Jy ! Component: 100 - total flux cleaned = 0.00387313 Jy ! Component: 150 - total flux cleaned = 0.00529219 Jy ! Component: 200 - total flux cleaned = 0.0065219 Jy ! Total flux subtracted in 200 components = 0.0065219 Jy ! Clean residual min=-0.001088 max=0.001088 Jy/beam ! Clean residual mean=-0.000000 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.203164 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 63 components and 0.203164 Jy ! Inverting map ! Added new window around map position (-1.4, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108166 Jy ! Component: 100 - total flux cleaned = 0.00191047 Jy ! Component: 150 - total flux cleaned = 0.0025897 Jy ! Component: 200 - total flux cleaned = 0.00320656 Jy ! Total flux subtracted in 200 components = 0.00320656 Jy ! Clean residual min=-0.000995 max=0.000966 Jy/beam ! Clean residual mean=-0.000000 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.206371 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 76 components and 0.206371 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.155 mas, bmaj=2.562 mas, bpa=4.79 degrees ! Estimated noise=0.217985 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000979602 Jy ! Component: 100 - total flux cleaned = 0.00169748 Jy ! Component: 150 - total flux cleaned = 0.00229225 Jy ! Component: 200 - total flux cleaned = 0.00270338 Jy ! Total flux subtracted in 200 components = 0.00270338 Jy ! Clean residual min=-0.000953 max=0.000860 Jy/beam ! Clean residual mean=-0.000001 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.209074 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256023 Jy ! Component: 100 - total flux cleaned = 0.000389567 Jy ! Component: 150 - total flux cleaned = 0.000498132 Jy ! Component: 200 - total flux cleaned = 0.000600354 Jy ! Total flux subtracted in 200 components = 0.000600354 Jy ! Clean residual min=-0.000916 max=0.000841 Jy/beam ! Clean residual mean=-0.000001 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.209674 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 123 components and 0.209674 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9607 mas, bmaj=1.511 mas, bpa=0.5341 degrees ! Estimated noise=0.173635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.09549e-06 Jy ! Component: 100 - total flux cleaned = -4.44321e-05 Jy ! Component: 150 - total flux cleaned = -2.23734e-05 Jy ! Component: 200 - total flux cleaned = 1.92684e-05 Jy ! Total flux subtracted in 200 components = 1.92684e-05 Jy ! Clean residual min=-0.000907 max=0.000881 Jy/beam ! Clean residual mean=-0.000001 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.209694 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 146 components and 0.209694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054956Jy sigma=1.270785 ! Fit after self-cal, rms=0.054951Jy sigma=1.270682 wmodel J0348+4149_X_map.mod ! Writing 146 model components to file: J0348+4149_X_map.mod wobs J0348+4149_X_uvs.fits ! Writing UV FITS file: J0348+4149_X_uvs.fits wwins J0348+4149_X_map.win ! wwins: Wrote 11 windows to J0348+4149_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104214 Jy ! Component: 100 - total flux cleaned = -0.000182931 Jy ! Component: 150 - total flux cleaned = -0.000138057 Jy ! Component: 200 - total flux cleaned = -0.000152297 Jy ! Component: 250 - total flux cleaned = -0.000123863 Jy ! Component: 300 - total flux cleaned = -0.000123737 Jy ! Component: 350 - total flux cleaned = -0.000110303 Jy ! Component: 400 - total flux cleaned = -8.40665e-05 Jy ! Component: 450 - total flux cleaned = -7.1265e-05 Jy ! Component: 500 - total flux cleaned = -8.38206e-05 Jy ! Component: 550 - total flux cleaned = -5.89045e-05 Jy ! Component: 600 - total flux cleaned = -7.12135e-05 Jy ! Component: 650 - total flux cleaned = -3.48829e-05 Jy ! Component: 700 - total flux cleaned = -2.29609e-05 Jy ! Component: 750 - total flux cleaned = 3.59202e-05 Jy ! Component: 800 - total flux cleaned = 7.08333e-05 Jy ! Component: 850 - total flux cleaned = 0.00016232 Jy ! Component: 900 - total flux cleaned = 0.000173642 Jy ! Component: 950 - total flux cleaned = 0.000207292 Jy ! Component: 1000 - total flux cleaned = 0.000229678 Jy ! Component: 1050 - total flux cleaned = 0.000273644 Jy ! Component: 1100 - total flux cleaned = 0.000284451 Jy ! Component: 1150 - total flux cleaned = 0.00032762 Jy ! Component: 1200 - total flux cleaned = 0.000380841 Jy ! Component: 1250 - total flux cleaned = 0.000412576 Jy ! Component: 1300 - total flux cleaned = 0.000443811 Jy ! Component: 1350 - total flux cleaned = 0.000475143 Jy ! Component: 1400 - total flux cleaned = 0.000516482 Jy ! Component: 1450 - total flux cleaned = 0.0005164 Jy ! Component: 1500 - total flux cleaned = 0.000567048 Jy ! Component: 1550 - total flux cleaned = 0.000607125 Jy ! Component: 1600 - total flux cleaned = 0.000597113 Jy ! Component: 1650 - total flux cleaned = 0.000616897 Jy ! Component: 1700 - total flux cleaned = 0.00068563 Jy ! Component: 1750 - total flux cleaned = 0.000714532 Jy ! Component: 1800 - total flux cleaned = 0.000695191 Jy ! Component: 1850 - total flux cleaned = 0.00073354 Jy ! Component: 1900 - total flux cleaned = 0.000752556 Jy ! Component: 1950 - total flux cleaned = 0.000771457 Jy ! Component: 2000 - total flux cleaned = 0.000809175 Jy ! Component: 2050 - total flux cleaned = 0.000799868 Jy ! Component: 2100 - total flux cleaned = 0.000864681 Jy ! Component: 2150 - total flux cleaned = 0.000873746 Jy ! Component: 2200 - total flux cleaned = 0.000882998 Jy ! Component: 2250 - total flux cleaned = 0.000919232 Jy ! Component: 2300 - total flux cleaned = 0.000874147 Jy ! Component: 2350 - total flux cleaned = 0.000927805 Jy ! Component: 2400 - total flux cleaned = 0.000963396 Jy ! Component: 2450 - total flux cleaned = 0.00098104 Jy ! Component: 2500 - total flux cleaned = 0.00101614 Jy ! Component: 2550 - total flux cleaned = 0.00103362 Jy ! Component: 2600 - total flux cleaned = 0.00105967 Jy ! Component: 2650 - total flux cleaned = 0.0010597 Jy ! Component: 2700 - total flux cleaned = 0.00108544 Jy ! Component: 2750 - total flux cleaned = 0.00111097 Jy ! Component: 2800 - total flux cleaned = 0.00108552 Jy ! Component: 2850 - total flux cleaned = 0.00112768 Jy ! Component: 2900 - total flux cleaned = 0.00113611 Jy ! Component: 2950 - total flux cleaned = 0.00115284 Jy ! Component: 3000 - total flux cleaned = 0.00111971 Jy ! Component: 3050 - total flux cleaned = 0.00114442 Jy ! Component: 3100 - total flux cleaned = 0.00115262 Jy ! Component: 3150 - total flux cleaned = 0.00116891 Jy ! Component: 3200 - total flux cleaned = 0.001177 Jy ! Component: 3250 - total flux cleaned = 0.00118506 Jy ! Component: 3300 - total flux cleaned = 0.00119315 Jy ! Component: 3350 - total flux cleaned = 0.00120908 Jy ! Component: 3400 - total flux cleaned = 0.001209 Jy ! Component: 3450 - total flux cleaned = 0.0012091 Jy ! Component: 3500 - total flux cleaned = 0.00116974 Jy ! Component: 3550 - total flux cleaned = 0.00119325 Jy ! Component: 3600 - total flux cleaned = 0.00118545 Jy ! Component: 3650 - total flux cleaned = 0.00121651 Jy ! Component: 3700 - total flux cleaned = 0.00120877 Jy ! Component: 3750 - total flux cleaned = 0.00119337 Jy ! Component: 3800 - total flux cleaned = 0.00118569 Jy ! Component: 3850 - total flux cleaned = 0.00119338 Jy ! Component: 3900 - total flux cleaned = 0.00121615 Jy ! Component: 3950 - total flux cleaned = 0.00123121 Jy ! Component: 4000 - total flux cleaned = 0.00123122 Jy ! Component: 4050 - total flux cleaned = 0.00126868 Jy ! Total flux subtracted in 4096 components = 0.00122394 Jy ! Clean residual min=-0.000563 max=0.000472 Jy/beam ! Clean residual mean=-0.000000 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.210917 Jy keep ! Adding 339 model components to the UV plane model. ! The established model now contains 485 components and 0.210918 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0348+4149_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9607 x 1.511 at 0.5341 degrees (North through East) ! Clean map min=-0.000755 max=0.15517 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0348+4149_X_map.fits wmodel /vlbi/uf001/uva//J0348+4149_X_map.mod ! Writing 485 model components to file: /vlbi/uf001/uva//J0348+4149_X_map.mod wobs /vlbi/uf001/uva//J0348+4149_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0348+4149_X_uvs.fits wwins /vlbi/uf001/uva//J0348+4149_X_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uva//J0348+4149_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.155168 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000128197 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.247856 0.247856 0.495712 0.991424 1.98285 3.96569 7.93139 15.8628 31.7256 63.4511 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.155 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1210.38 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0348+4149_X_dfm.log closed on Sun Jan 13 21:55:31 2019