! Started logfile: /vlbi/uf001/uvm//J0345+1453_X_a_dfm.log on Sun Jan 13 20:41:32 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0345+1453_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0345+1453_X_a_uvm.fits ! AN table 1: 5 integrations on 36 of 36 possible baselines. ! AN table 2: 27 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.858781 visibilities/baseline/integration-bin. ! Found source: J0345+1453 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 14376 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0345+1453_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.213850Jy sigma=21.057001 ! Fit after self-cal, rms=0.322540Jy sigma=5.664849 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6777 mas, bmaj=1.585 mas, bpa=-2.543 degrees ! Estimated noise=0.582356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.526077 Jy ! Component: 100 - total flux cleaned = 0.647368 Jy ! Total flux subtracted in 100 components = 0.647368 Jy ! Clean residual min=-0.017576 max=0.044885 Jy/beam ! Clean residual mean=-0.000012 rms=0.003509 Jy/beam ! Combined flux in latest and established models = 0.647368 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.647368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121763Jy sigma=2.066871 ! Fit after self-cal, rms=0.121749Jy sigma=2.066630 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0478784 Jy ! Component: 100 - total flux cleaned = 0.0721363 Jy ! Total flux subtracted in 100 components = 0.0721363 Jy ! Clean residual min=-0.014889 max=0.019448 Jy/beam ! Clean residual mean=-0.000009 rms=0.002728 Jy/beam ! Combined flux in latest and established models = 0.719504 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 14 components and 0.719504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098497Jy sigma=1.675186 ! Fit after self-cal, rms=0.098481Jy sigma=1.674978 ! Inverting map ! Added new window around map position (1, 2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201051 Jy ! Component: 100 - total flux cleaned = 0.0330659 Jy ! Total flux subtracted in 100 components = 0.0330659 Jy ! Clean residual min=-0.014665 max=0.018992 Jy/beam ! Clean residual mean=-0.000007 rms=0.002535 Jy/beam ! Combined flux in latest and established models = 0.75257 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.75257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093796Jy sigma=1.594424 ! Fit after self-cal, rms=0.093486Jy sigma=1.589364 ! Inverting map ! Added new window around map position (-1, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171696 Jy ! Component: 100 - total flux cleaned = 0.0283221 Jy ! Total flux subtracted in 100 components = 0.0283221 Jy ! Clean residual min=-0.015037 max=0.013598 Jy/beam ! Clean residual mean=-0.000006 rms=0.002366 Jy/beam ! Combined flux in latest and established models = 0.780892 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.780892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089690Jy sigma=1.522078 ! Fit after self-cal, rms=0.089586Jy sigma=1.520239 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8487 mas, bmaj=1.88 mas, bpa=-0.4973 degrees ! Estimated noise=0.411406 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168242 Jy ! Component: 100 - total flux cleaned = 0.0274205 Jy ! Component: 150 - total flux cleaned = 0.0352765 Jy ! Component: 200 - total flux cleaned = 0.0387751 Jy ! Total flux subtracted in 200 components = 0.0387751 Jy ! Clean residual min=-0.016223 max=0.014148 Jy/beam ! Clean residual mean=-0.000007 rms=0.002601 Jy/beam ! Combined flux in latest and established models = 0.819667 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 61 components and 0.819667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085529Jy sigma=1.447717 ! Fit after self-cal, rms=0.085317Jy sigma=1.444003 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8487 x 1.88 at -0.4973 degrees (North through East) ! Clean map min=-0.014801 max=0.68632 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.04 HN 0.92 KP 1.05 ! LA 0.99 MK 1.01 NL 1.17 OV 0.91 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.04 HN 0.97 KP 1.02 ! LA 1.02 MK 1.02 NL 1.06 OV 0.93 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.07 HN 0.96 KP 1.07 ! LA 0.97 MK 1.02 NL 1.13 OV 0.90 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.04 HN 0.95 KP 1.02 ! LA 1.01 MK 1.03 NL 1.07 OV 0.93 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 HN 0.98 KP 1.07 ! LA 1.01 MK 1.03 NL 1.12 OV 0.93 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.03 HN 0.97 KP 1.03 ! LA 1.01 MK 1.03 NL 1.06 OV 0.93 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.07 HN 0.94 KP 1.07 ! LA 0.97 MK 1.03 NL 1.14 OV 0.92 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.04 HN 0.98 KP 1.02 ! LA 1.00 MK 1.01 NL 1.07 OV 0.93 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.08 HN 0.94 KP 1.07 ! LA 0.97 MK 1.04 NL 1.11 OV 0.95 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.04 HN 0.97 KP 1.03 ! LA 1.01 MK 1.02 NL 1.07 OV 0.93 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.05 HN 0.93 KP 1.06 ! LA 0.97 MK 1.04 NL 1.17 OV 0.93 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.03 HN 0.96 KP 1.03 ! LA 1.01 MK 1.00 NL 1.06 OV 0.95 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 HN 0.92 KP 1.10 ! LA 0.97 MK 1.03 NL 1.13 OV 0.93 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.05 HN 0.96 KP 1.01 ! LA 1.01 MK 1.03 NL 1.06 OV 0.93 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.07 HN 0.92 KP 1.04 ! LA 0.98 MK 1.05 NL 1.13 OV 0.96 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.03 HN 0.97 KP 1.02 ! LA 1.01 MK 1.03 NL 1.06 OV 0.93 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.03 HN 0.94 KP 1.05 ! LA 0.97 MK 1.04 NL 1.11 OV 0.93 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.03 HN 0.97 KP 1.01 ! LA 1.00 MK 1.02 NL 1.06 OV 0.93 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 0.93 KP 1.10 ! LA 0.96 MK 1.03 NL 1.09 OV 0.92 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.03 HN 0.97 KP 1.01 ! LA 1.00 MK 1.03 NL 1.06 OV 0.93 ! PT 0.89 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.96 KP 1.05 ! LA 0.99 MK 1.04 NL 1.14 OV 0.93 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.03 HN 0.97 KP 1.01 ! LA 1.01 MK 1.04 NL 1.06 OV 0.93 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.07 HN 0.96 KP 1.06 ! LA 0.97 MK 1.06 NL 1.12 OV 0.90 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.03 HN 0.97 KP 1.02 ! LA 1.00 MK 1.07 NL 1.07 OV 0.93 ! PT 0.90 SC 0.98 ! ! ! Fit before self-cal, rms=0.085317Jy sigma=1.444003 ! Fit after self-cal, rms=0.066070Jy sigma=1.103552 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8499 mas, bmaj=1.896 mas, bpa=-0.2522 degrees ! Estimated noise=0.412229 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0115892 Jy ! Component: 100 - total flux cleaned = -0.0172 Jy ! Component: 150 - total flux cleaned = -0.0191813 Jy ! Component: 200 - total flux cleaned = -0.0207804 Jy ! Total flux subtracted in 200 components = -0.0207804 Jy ! Clean residual min=-0.005223 max=0.007522 Jy/beam ! Clean residual mean=0.000002 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.798887 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 84 components and 0.798887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063770Jy sigma=1.063238 ! Fit after self-cal, rms=0.063769Jy sigma=1.062771 ! Inverting map ! Added new window around map position (-7.4, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00685181 Jy ! Component: 100 - total flux cleaned = 0.00798373 Jy ! Component: 150 - total flux cleaned = 0.00865077 Jy ! Component: 200 - total flux cleaned = 0.00912626 Jy ! Total flux subtracted in 200 components = 0.00912626 Jy ! Clean residual min=-0.004616 max=0.004713 Jy/beam ! Clean residual mean=0.000003 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.808013 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 100 components and 0.808013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062831Jy sigma=1.047120 ! Fit after self-cal, rms=0.062778Jy sigma=1.046405 ! Inverting map ! Added new window around map position (2.8, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245423 Jy ! Component: 100 - total flux cleaned = 0.0024557 Jy ! Component: 150 - total flux cleaned = 0.00246112 Jy ! Component: 200 - total flux cleaned = 0.00215536 Jy ! Total flux subtracted in 200 components = 0.00215536 Jy ! Clean residual min=-0.004310 max=0.004483 Jy/beam ! Clean residual mean=0.000004 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.810169 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 118 components and 0.810168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062308Jy sigma=1.039014 ! Fit after self-cal, rms=0.062288Jy sigma=1.038730 ! Inverting map ! Added new window around map position (-5.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269203 Jy ! Component: 100 - total flux cleaned = 0.00315385 Jy ! Component: 150 - total flux cleaned = 0.00295225 Jy ! Component: 200 - total flux cleaned = 0.00266894 Jy ! Total flux subtracted in 200 components = 0.00266894 Jy ! Clean residual min=-0.004137 max=0.003818 Jy/beam ! Clean residual mean=0.000004 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.812837 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 133 components and 0.812837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061883Jy sigma=1.031977 ! Fit after self-cal, rms=0.061870Jy sigma=1.031754 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061870Jy sigma=1.031754 ! Fit after self-cal, rms=0.058912Jy sigma=0.978631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8499 mas, bmaj=1.896 mas, bpa=-0.2796 degrees ! Estimated noise=0.41231 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0049772 Jy ! Component: 100 - total flux cleaned = -0.00819984 Jy ! Component: 150 - total flux cleaned = -0.00879732 Jy ! Component: 200 - total flux cleaned = -0.00904837 Jy ! Total flux subtracted in 200 components = -0.00904837 Jy ! Clean residual min=-0.002752 max=0.002983 Jy/beam ! Clean residual mean=0.000000 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.803789 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 146 components and 0.803789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058381Jy sigma=0.969306 ! Fit after self-cal, rms=0.058378Jy sigma=0.969233 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193055 Jy ! Component: 100 - total flux cleaned = 0.00193516 Jy ! Component: 150 - total flux cleaned = 0.00171996 Jy ! Component: 200 - total flux cleaned = 0.00158561 Jy ! Total flux subtracted in 200 components = 0.00158561 Jy ! Clean residual min=-0.002477 max=0.002580 Jy/beam ! Clean residual mean=0.000000 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.805375 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 164 components and 0.805375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058163Jy sigma=0.965540 ! Fit after self-cal, rms=0.058156Jy sigma=0.965451 ! Inverting map ! Added new window around map position (3.6, 19.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173249 Jy ! Component: 100 - total flux cleaned = 0.00246893 Jy ! Component: 150 - total flux cleaned = 0.00252976 Jy ! Component: 200 - total flux cleaned = 0.00258702 Jy ! Total flux subtracted in 200 components = 0.00258702 Jy ! Clean residual min=-0.002457 max=0.002215 Jy/beam ! Clean residual mean=0.000000 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.807962 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 183 components and 0.807961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057998Jy sigma=0.962929 ! Fit after self-cal, rms=0.057994Jy sigma=0.962880 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057994Jy sigma=0.962880 ! Fit after self-cal, rms=0.057782Jy sigma=0.959954 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8496 mas, bmaj=1.897 mas, bpa=-0.2547 degrees ! Estimated noise=0.412248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00280767 Jy ! Component: 100 - total flux cleaned = -0.00451699 Jy ! Component: 150 - total flux cleaned = -0.00528859 Jy ! Component: 200 - total flux cleaned = -0.00569533 Jy ! Total flux subtracted in 200 components = -0.00569533 Jy ! Clean residual min=-0.002145 max=0.002065 Jy/beam ! Clean residual mean=-0.000000 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.802266 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 191 components and 0.802266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057595Jy sigma=0.956556 ! Fit after self-cal, rms=0.057593Jy sigma=0.956522 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00028519 Jy ! Component: 100 - total flux cleaned = -0.00048449 Jy ! Component: 150 - total flux cleaned = -0.000726657 Jy ! Component: 200 - total flux cleaned = -0.000865781 Jy ! Total flux subtracted in 200 components = -0.000865781 Jy ! Clean residual min=-0.002050 max=0.002028 Jy/beam ! Clean residual mean=-0.000000 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.8014 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 205 components and 0.8014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057519Jy sigma=0.955226 ! Fit after self-cal, rms=0.057518Jy sigma=0.955217 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057518Jy sigma=0.955217 ! Fit after self-cal, rms=0.057446Jy sigma=0.954324 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.032 mas, bmaj=2.916 mas, bpa=-3.305 degrees ! Estimated noise=0.545407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00277377 Jy ! Component: 100 - total flux cleaned = -0.00418495 Jy ! Component: 150 - total flux cleaned = -0.00494522 Jy ! Component: 200 - total flux cleaned = -0.00559088 Jy ! Total flux subtracted in 200 components = -0.00559088 Jy ! Clean residual min=-0.002520 max=0.002519 Jy/beam ! Clean residual mean=-0.000001 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.79581 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 235 components and 0.79581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057368Jy sigma=0.952969 ! Fit after self-cal, rms=0.057366Jy sigma=0.952936 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000547344 Jy ! Component: 100 - total flux cleaned = -0.00098267 Jy ! Component: 150 - total flux cleaned = -0.00137609 Jy ! Component: 200 - total flux cleaned = -0.00164665 Jy ! Total flux subtracted in 200 components = -0.00164665 Jy ! Clean residual min=-0.002445 max=0.002438 Jy/beam ! Clean residual mean=-0.000001 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.794163 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 246 components and 0.794163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057354Jy sigma=0.952726 ! Fit after self-cal, rms=0.057353Jy sigma=0.952711 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8496 mas, bmaj=1.898 mas, bpa=-0.2328 degrees ! Estimated noise=0.412255 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8496 x 1.898 at -0.2328 degrees (North through East) ! Clean map min=-0.0026184 max=0.68957 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057353Jy sigma=0.952711 ! Fit after self-cal, rms=0.053678Jy sigma=0.886783 ! Inverting map and beam ! Estimated beam: bmin=0.8501 mas, bmaj=1.899 mas, bpa=-0.2439 degrees ! Estimated noise=0.412273 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166504 Jy ! Component: 100 - total flux cleaned = -0.00203318 Jy ! Component: 150 - total flux cleaned = -0.00221823 Jy ! Component: 200 - total flux cleaned = -0.00230404 Jy ! Total flux subtracted in 200 components = -0.00230404 Jy ! Clean residual min=-0.001851 max=0.001831 Jy/beam ! Clean residual mean=-0.000000 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.791859 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 260 components and 0.791859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053589Jy sigma=0.885140 ! Fit after self-cal, rms=0.053587Jy sigma=0.885117 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177621 Jy ! Component: 100 - total flux cleaned = -0.000417735 Jy ! Component: 150 - total flux cleaned = -0.000647735 Jy ! Component: 200 - total flux cleaned = -0.000904309 Jy ! Total flux subtracted in 200 components = -0.000904309 Jy ! Clean residual min=-0.001776 max=0.001759 Jy/beam ! Clean residual mean=-0.000000 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.790955 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 271 components and 0.790955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053540Jy sigma=0.884241 ! Fit after self-cal, rms=0.053539Jy sigma=0.884232 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053539Jy sigma=0.884232 ! Fit after self-cal, rms=0.053524Jy sigma=0.883925 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6783 mas, bmaj=1.597 mas, bpa=-2.258 degrees ! Estimated noise=0.58254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.526214 Jy ! Component: 100 - total flux cleaned = 0.646307 Jy ! Component: 150 - total flux cleaned = 0.694167 Jy ! Component: 200 - total flux cleaned = 0.718753 Jy ! Total flux subtracted in 200 components = 0.718753 Jy ! Clean residual min=-0.005052 max=0.011631 Jy/beam ! Clean residual mean=-0.000005 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.718753 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.718753 Jy ! Inverting map and beam ! Estimated beam: bmin=0.85 mas, bmaj=1.9 mas, bpa=-0.2348 degrees ! Estimated noise=0.412312 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152487 Jy ! Component: 100 - total flux cleaned = 0.0243406 Jy ! Component: 150 - total flux cleaned = 0.0310244 Jy ! Component: 200 - total flux cleaned = 0.0365224 Jy ! Total flux subtracted in 200 components = 0.0365224 Jy ! Clean residual min=-0.002990 max=0.004645 Jy/beam ! Clean residual mean=-0.000005 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.755276 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 36 components and 0.755276 Jy ! Inverting map ! Added new window around map position (5.8, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498 Jy ! Component: 100 - total flux cleaned = 0.00874924 Jy ! Component: 150 - total flux cleaned = 0.0117487 Jy ! Component: 200 - total flux cleaned = 0.0143946 Jy ! Total flux subtracted in 200 components = 0.0143946 Jy ! Clean residual min=-0.002406 max=0.002497 Jy/beam ! Clean residual mean=-0.000003 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.76967 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 54 components and 0.76967 Jy ! Inverting map ! Added new window around map position (15.8, 31.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257143 Jy ! Component: 100 - total flux cleaned = 0.00482543 Jy ! Component: 150 - total flux cleaned = 0.00660034 Jy ! Component: 200 - total flux cleaned = 0.0079716 Jy ! Total flux subtracted in 200 components = 0.0079716 Jy ! Clean residual min=-0.002041 max=0.001992 Jy/beam ! Clean residual mean=-0.000002 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.777642 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 73 components and 0.777642 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.034 mas, bmaj=2.919 mas, bpa=-3.26 degrees ! Estimated noise=0.544889 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287201 Jy ! Component: 100 - total flux cleaned = 0.0041165 Jy ! Component: 150 - total flux cleaned = 0.00460886 Jy ! Component: 200 - total flux cleaned = 0.00499214 Jy ! Total flux subtracted in 200 components = 0.00499214 Jy ! Clean residual min=-0.002099 max=0.002178 Jy/beam ! Clean residual mean=-0.000003 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.782634 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00041158 Jy ! Component: 100 - total flux cleaned = 0.000680195 Jy ! Component: 150 - total flux cleaned = 0.000877358 Jy ! Component: 200 - total flux cleaned = 0.000968346 Jy ! Total flux subtracted in 200 components = 0.000968346 Jy ! Clean residual min=-0.002038 max=0.002121 Jy/beam ! Clean residual mean=-0.000002 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.783602 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 115 components and 0.783602 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.85 mas, bmaj=1.9 mas, bpa=-0.2348 degrees ! Estimated noise=0.412312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000534538 Jy ! Component: 100 - total flux cleaned = 0.000599031 Jy ! Component: 150 - total flux cleaned = 0.000656454 Jy ! Component: 200 - total flux cleaned = 0.000711366 Jy ! Total flux subtracted in 200 components = 0.000711366 Jy ! Clean residual min=-0.001806 max=0.001696 Jy/beam ! Clean residual mean=-0.000001 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.784314 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 136 components and 0.784314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053664Jy sigma=0.886110 ! Fit after self-cal, rms=0.053642Jy sigma=0.885716 wmodel J0345+1453_X_a_map.mod ! Writing 136 model components to file: J0345+1453_X_a_map.mod wobs J0345+1453_X_a_uvs.fits ! Writing UV FITS file: J0345+1453_X_a_uvs.fits wwins J0345+1453_X_a_map.win ! wwins: Wrote 11 windows to J0345+1453_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000630047 Jy ! Component: 100 - total flux cleaned = -0.00118393 Jy ! Component: 150 - total flux cleaned = -0.00165639 Jy ! Component: 200 - total flux cleaned = -0.00200073 Jy ! Component: 250 - total flux cleaned = -0.00233687 Jy ! Component: 300 - total flux cleaned = -0.00261163 Jy ! Component: 350 - total flux cleaned = -0.00282681 Jy ! Component: 400 - total flux cleaned = -0.0030119 Jy ! Component: 450 - total flux cleaned = -0.00316795 Jy ! Component: 500 - total flux cleaned = -0.00327071 Jy ! Component: 550 - total flux cleaned = -0.00339775 Jy ! Component: 600 - total flux cleaned = -0.00349719 Jy ! Component: 650 - total flux cleaned = -0.00347268 Jy ! Component: 700 - total flux cleaned = -0.00352175 Jy ! Component: 750 - total flux cleaned = -0.00359442 Jy ! Component: 800 - total flux cleaned = -0.00352321 Jy ! Component: 850 - total flux cleaned = -0.00357062 Jy ! Component: 900 - total flux cleaned = -0.00357049 Jy ! Component: 950 - total flux cleaned = -0.00350096 Jy ! Component: 1000 - total flux cleaned = -0.00352388 Jy ! Component: 1050 - total flux cleaned = -0.00356947 Jy ! Component: 1100 - total flux cleaned = -0.00347956 Jy ! Component: 1150 - total flux cleaned = -0.00350195 Jy ! Component: 1200 - total flux cleaned = -0.00363413 Jy ! Component: 1250 - total flux cleaned = -0.00354664 Jy ! Component: 1300 - total flux cleaned = -0.00354669 Jy ! Component: 1350 - total flux cleaned = -0.00358957 Jy ! Component: 1400 - total flux cleaned = -0.00361086 Jy ! Component: 1450 - total flux cleaned = -0.00363207 Jy ! Component: 1500 - total flux cleaned = -0.00356906 Jy ! Component: 1550 - total flux cleaned = -0.00369443 Jy ! Component: 1600 - total flux cleaned = -0.00369442 Jy ! Component: 1650 - total flux cleaned = -0.00375597 Jy ! Component: 1700 - total flux cleaned = -0.00375611 Jy ! Component: 1750 - total flux cleaned = -0.00375608 Jy ! Component: 1800 - total flux cleaned = -0.00387686 Jy ! Component: 1850 - total flux cleaned = -0.0039169 Jy ! Component: 1900 - total flux cleaned = -0.00387698 Jy ! Component: 1950 - total flux cleaned = -0.00391654 Jy ! Component: 2000 - total flux cleaned = -0.00397557 Jy ! Component: 2050 - total flux cleaned = -0.00399509 Jy ! Component: 2100 - total flux cleaned = -0.0040338 Jy ! Component: 2150 - total flux cleaned = -0.00405311 Jy ! Component: 2200 - total flux cleaned = -0.00407225 Jy ! Component: 2250 - total flux cleaned = -0.00414845 Jy ! Component: 2300 - total flux cleaned = -0.00407251 Jy ! Component: 2350 - total flux cleaned = -0.00412924 Jy ! Component: 2400 - total flux cleaned = -0.00411071 Jy ! Component: 2450 - total flux cleaned = -0.00416666 Jy ! Component: 2500 - total flux cleaned = -0.00420373 Jy ! Component: 2550 - total flux cleaned = -0.00422219 Jy ! Component: 2600 - total flux cleaned = -0.00425897 Jy ! Component: 2650 - total flux cleaned = -0.00422228 Jy ! Component: 2700 - total flux cleaned = -0.00427689 Jy ! Component: 2750 - total flux cleaned = -0.00425878 Jy ! Component: 2800 - total flux cleaned = -0.00424071 Jy ! Component: 2850 - total flux cleaned = -0.00420499 Jy ! Component: 2900 - total flux cleaned = -0.00429424 Jy ! Component: 2950 - total flux cleaned = -0.0042233 Jy ! Component: 3000 - total flux cleaned = -0.00429388 Jy ! Component: 3050 - total flux cleaned = -0.00431155 Jy ! Component: 3100 - total flux cleaned = -0.00434663 Jy ! Component: 3150 - total flux cleaned = -0.00432901 Jy ! Component: 3200 - total flux cleaned = -0.00431172 Jy ! Component: 3250 - total flux cleaned = -0.004398 Jy ! Component: 3300 - total flux cleaned = -0.00434644 Jy ! Component: 3350 - total flux cleaned = -0.00441488 Jy ! Component: 3400 - total flux cleaned = -0.00446593 Jy ! Component: 3450 - total flux cleaned = -0.00444906 Jy ! Component: 3500 - total flux cleaned = -0.00438156 Jy ! Component: 3550 - total flux cleaned = -0.00444868 Jy ! Component: 3600 - total flux cleaned = -0.00451565 Jy ! Component: 3650 - total flux cleaned = -0.00444896 Jy ! Component: 3700 - total flux cleaned = -0.00448208 Jy ! Component: 3750 - total flux cleaned = -0.00449859 Jy ! Component: 3800 - total flux cleaned = -0.00448216 Jy ! Component: 3850 - total flux cleaned = -0.00464603 Jy ! Component: 3900 - total flux cleaned = -0.00464601 Jy ! Component: 3950 - total flux cleaned = -0.00453211 Jy ! Component: 4000 - total flux cleaned = -0.00454837 Jy ! Component: 4050 - total flux cleaned = -0.00458049 Jy ! Total flux subtracted in 4096 components = -0.00464472 Jy ! Clean residual min=-0.000979 max=0.001244 Jy/beam ! Clean residual mean=-0.000000 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.779669 Jy keep ! Adding 343 model components to the UV plane model. ! The established model now contains 478 components and 0.779669 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0345+1453_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.85 x 1.9 at -0.2348 degrees (North through East) ! Clean map min=-0.0020416 max=0.69114 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0345+1453_X_a_map.fits wmodel /vlbi/uf001/uvm//J0345+1453_X_a_map.mod ! Writing 478 model components to file: /vlbi/uf001/uvm//J0345+1453_X_a_map.mod wobs /vlbi/uf001/uvm//J0345+1453_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0345+1453_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0345+1453_X_a_map.win ! wwins: Wrote 12 windows to /vlbi/uf001/uvm//J0345+1453_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.69114 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000281809 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.122324 0.122324 0.244647 0.489295 0.97859 1.95718 3.91436 7.82872 15.6574 31.3149 62.6298 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.691 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2452.51 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0345+1453_X_a_dfm.log closed on Sun Jan 13 20:41:37 2019