! Started logfile: /vlbi/uf001/uva//J0336-2036_S_dfm.log on Sun Jan 13 21:51:46 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0336-2036_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0336-2036_S_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.898611 visibilities/baseline/integration-bin.
! Found source: J0336-2036
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5823 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0336-2036_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.024175Jy  sigma=16.625597
! Fit after  self-cal, rms=0.851515Jy  sigma=13.781352
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.465 mas, bmaj=6.711 mas, bpa=-4.88 degrees
! Estimated noise=0.718227 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.111945 Jy
! Component: 100  -  total flux cleaned = 0.143808 Jy
! Total flux subtracted in 100 components = 0.143808 Jy
! Clean residual min=-0.007769 max=0.025890 Jy/beam
! Clean residual mean=-0.000027 rms=0.002676 Jy/beam
! Combined flux in latest and established models = 0.143808 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.143808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084690Jy  sigma=1.361774
! Fit after  self-cal, rms=0.084657Jy  sigma=1.361224
! Inverting map 
! Added new window around map position (-3.5, -5.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0231856 Jy
! Component: 100  -  total flux cleaned = 0.0360898 Jy
! Total flux subtracted in 100 components = 0.0360898 Jy
! Clean residual min=-0.006411 max=0.012244 Jy/beam
! Clean residual mean=-0.000018 rms=0.001574 Jy/beam
! Combined flux in latest and established models = 0.179898 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 30 components and 0.179898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077020Jy  sigma=1.230695
! Fit after  self-cal, rms=0.076649Jy  sigma=1.224529
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00993021 Jy
! Component: 100  -  total flux cleaned = 0.0161665 Jy
! Total flux subtracted in 100 components = 0.0161665 Jy
! Clean residual min=-0.005209 max=0.007756 Jy/beam
! Clean residual mean=-0.000013 rms=0.001192 Jy/beam
! Combined flux in latest and established models = 0.196064 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 55 components and 0.196064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075070Jy  sigma=1.196567
! Fit after  self-cal, rms=0.074970Jy  sigma=1.194934
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.979 mas, bmaj=7.631 mas, bpa=-4.637 degrees
! Estimated noise=0.576799 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00620097 Jy
! Component: 100  -  total flux cleaned = 0.00952275 Jy
! Component: 150  -  total flux cleaned = 0.0115743 Jy
! Component: 200  -  total flux cleaned = 0.0120853 Jy
! Total flux subtracted in 200 components = 0.0120853 Jy
! Clean residual min=-0.005481 max=0.004633 Jy/beam
! Clean residual mean=-0.000013 rms=0.001089 Jy/beam
! Combined flux in latest and established models = 0.208149 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 77 components and 0.208149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074476Jy  sigma=1.185689
! Fit after  self-cal, rms=0.074431Jy  sigma=1.185020
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.979 x 7.631 at -4.637 degrees (North through East)
! Clean map  min=-0.0054087  max=0.13634 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.91     HN        1.08     KP        1.01     
!   LA        0.90     MK        1.01     NL        1.10     OV        1.02     
!   PT        1.05     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.94     HN        1.06     KP        1.02     
!   LA        0.91     MK        0.98     NL        1.00     OV        1.01     
!   PT        1.05     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.90     HN        1.09     KP        1.01     
!   LA        0.93     MK        0.99     NL        0.98     OV        1.02     
!   PT        1.04     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.074431Jy  sigma=1.185020
! Fit after  self-cal, rms=0.074410Jy  sigma=1.169926
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.984 mas, bmaj=7.625 mas, bpa=-4.53 degrees
! Estimated noise=0.581125 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000109401 Jy
! Component: 100  -  total flux cleaned = -0.000209374 Jy
! Component: 150  -  total flux cleaned = -0.000339988 Jy
! Component: 200  -  total flux cleaned = -0.000500862 Jy
! Total flux subtracted in 200 components = -0.000500862 Jy
! Clean residual min=-0.002713 max=0.003200 Jy/beam
! Clean residual mean=-0.000003 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.207649 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 86 components and 0.207649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074351Jy  sigma=1.169030
! Fit after  self-cal, rms=0.074394Jy  sigma=1.168732
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074394Jy  sigma=1.168732
! Fit after  self-cal, rms=0.074539Jy  sigma=1.166459
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.983 mas, bmaj=7.64 mas, bpa=-4.549 degrees
! Estimated noise=0.581641 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000136513 Jy
! Component: 100  -  total flux cleaned = -0.000343171 Jy
! Component: 150  -  total flux cleaned = -0.000454136 Jy
! Component: 200  -  total flux cleaned = -0.00055837 Jy
! Total flux subtracted in 200 components = -0.00055837 Jy
! Clean residual min=-0.002661 max=0.002843 Jy/beam
! Clean residual mean=0.000002 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.20709 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 91 components and 0.20709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074500Jy  sigma=1.165852
! Fit after  self-cal, rms=0.074508Jy  sigma=1.165772
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-97, 125).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187126 Jy
! Component: 100  -  total flux cleaned = 0.00230054 Jy
! Component: 150  -  total flux cleaned = 0.00241695 Jy
! Component: 200  -  total flux cleaned = 0.00248275 Jy
! Total flux subtracted in 200 components = 0.00248275 Jy
! Clean residual min=-0.002686 max=0.002607 Jy/beam
! Clean residual mean=0.000002 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.209573 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 101 components and 0.209573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074427Jy  sigma=1.164385
! Fit after  self-cal, rms=0.074424Jy  sigma=1.164305
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074424Jy  sigma=1.164305
! Fit after  self-cal, rms=0.074503Jy  sigma=1.164194
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.983 mas, bmaj=7.645 mas, bpa=-4.585 degrees
! Estimated noise=0.581676 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000346549 Jy
! Component: 100  -  total flux cleaned = 0.000280478 Jy
! Component: 150  -  total flux cleaned = 0.000308214 Jy
! Component: 200  -  total flux cleaned = 0.000306838 Jy
! Total flux subtracted in 200 components = 0.000306838 Jy
! Clean residual min=-0.002632 max=0.002579 Jy/beam
! Clean residual mean=0.000003 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.20988 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 106 components and 0.20988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074479Jy  sigma=1.163815
! Fit after  self-cal, rms=0.074482Jy  sigma=1.163779
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.97717e-05 Jy
! Component: 100  -  total flux cleaned = -1.32147e-05 Jy
! Component: 150  -  total flux cleaned = -3.87217e-05 Jy
! Component: 200  -  total flux cleaned = -6.29675e-05 Jy
! Total flux subtracted in 200 components = -6.29675e-05 Jy
! Clean residual min=-0.002596 max=0.002565 Jy/beam
! Clean residual mean=0.000004 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.209817 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 108 components and 0.209817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074464Jy  sigma=1.163520
! Fit after  self-cal, rms=0.074464Jy  sigma=1.163494
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074464Jy  sigma=1.163494
! Fit after  self-cal, rms=0.074519Jy  sigma=1.163477
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.213 mas, bmaj=15.66 mas, bpa=0.3959 degrees
! Estimated noise=0.767796 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000814325 Jy
! Component: 100  -  total flux cleaned = -0.000974455 Jy
! Component: 150  -  total flux cleaned = -0.00105282 Jy
! Component: 200  -  total flux cleaned = -0.00110542 Jy
! Total flux subtracted in 200 components = -0.00110542 Jy
! Clean residual min=-0.002732 max=0.002667 Jy/beam
! Clean residual mean=0.000006 rms=0.000772 Jy/beam
! Combined flux in latest and established models = 0.208711 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 117 components and 0.208711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074512Jy  sigma=1.163400
! Fit after  self-cal, rms=0.074511Jy  sigma=1.163380
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117683 Jy
! Component: 100  -  total flux cleaned = -0.000152472 Jy
! Component: 150  -  total flux cleaned = -0.000152322 Jy
! Component: 200  -  total flux cleaned = -0.000167036 Jy
! Total flux subtracted in 200 components = -0.000167036 Jy
! Clean residual min=-0.002675 max=0.002695 Jy/beam
! Clean residual mean=0.000006 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.208544 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 118 components and 0.208544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074506Jy  sigma=1.163348
! Fit after  self-cal, rms=0.074506Jy  sigma=1.163337
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.985 mas, bmaj=7.649 mas, bpa=-4.603 degrees
! Estimated noise=0.582033 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.985 x 7.649 at -4.603 degrees (North through East)
! Clean map  min=-0.0024028  max=0.13754 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.468 mas, bmaj=6.731 mas, bpa=-4.746 degrees
! Estimated noise=0.726119 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113112 Jy
! Component: 100  -  total flux cleaned = 0.149719 Jy
! Component: 150  -  total flux cleaned = 0.169539 Jy
! Component: 200  -  total flux cleaned = 0.181932 Jy
! Total flux subtracted in 200 components = 0.181932 Jy
! Clean residual min=-0.004062 max=0.006965 Jy/beam
! Clean residual mean=-0.000006 rms=0.001170 Jy/beam
! Combined flux in latest and established models = 0.181932 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.181932 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.985 mas, bmaj=7.649 mas, bpa=-4.603 degrees
! Estimated noise=0.582033 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102473 Jy
! Component: 100  -  total flux cleaned = 0.0161903 Jy
! Component: 150  -  total flux cleaned = 0.0199516 Jy
! Component: 200  -  total flux cleaned = 0.0226448 Jy
! Total flux subtracted in 200 components = 0.0226448 Jy
! Clean residual min=-0.002653 max=0.003287 Jy/beam
! Clean residual mean=0.000000 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.204577 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 65 components and 0.204577 Jy
! Inverting map 
! Added new window around map position (3.5, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196333 Jy
! Component: 100  -  total flux cleaned = 0.00286594 Jy
! Component: 150  -  total flux cleaned = 0.00337145 Jy
! Component: 200  -  total flux cleaned = 0.00375902 Jy
! Total flux subtracted in 200 components = 0.00375902 Jy
! Clean residual min=-0.002462 max=0.002519 Jy/beam
! Clean residual mean=0.000003 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.208336 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 78 components and 0.208336 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.213 mas, bmaj=15.66 mas, bpa=0.3959 degrees
! Estimated noise=0.767796 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.09307e-05 Jy
! Component: 100  -  total flux cleaned = 6.20644e-05 Jy
! Component: 150  -  total flux cleaned = 0.000185912 Jy
! Component: 200  -  total flux cleaned = 0.000324544 Jy
! Total flux subtracted in 200 components = 0.000324544 Jy
! Clean residual min=-0.002738 max=0.002610 Jy/beam
! Clean residual mean=0.000007 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.20866 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102786 Jy
! Component: 100  -  total flux cleaned = 0.000198255 Jy
! Component: 150  -  total flux cleaned = 0.000288021 Jy
! Component: 200  -  total flux cleaned = 0.000374209 Jy
! Total flux subtracted in 200 components = 0.000374209 Jy
! Clean residual min=-0.002698 max=0.002557 Jy/beam
! Clean residual mean=0.000007 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.209035 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 99 components and 0.209035 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.985 mas, bmaj=7.649 mas, bpa=-4.603 degrees
! Estimated noise=0.582033 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00032332 Jy
! Component: 100  -  total flux cleaned = 0.000755569 Jy
! Component: 150  -  total flux cleaned = 0.000963277 Jy
! Component: 200  -  total flux cleaned = 0.00115403 Jy
! Total flux subtracted in 200 components = 0.00115403 Jy
! Clean residual min=-0.002378 max=0.002356 Jy/beam
! Clean residual mean=0.000004 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.210189 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 118 components and 0.210189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074471Jy  sigma=1.162746
! Fit after  self-cal, rms=0.074467Jy  sigma=1.162670
wmodel J0336-2036_S_map.mod
! Writing 118 model components to file: J0336-2036_S_map.mod
wobs   J0336-2036_S_uvs.fits
! Writing UV FITS file: J0336-2036_S_uvs.fits
wwins  J0336-2036_S_map.win
! wwins: Wrote 4 windows to J0336-2036_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123778 Jy
! Component: 100  -  total flux cleaned = 0.000288719 Jy
! Component: 150  -  total flux cleaned = 0.000212533 Jy
! Component: 200  -  total flux cleaned = 0.000140151 Jy
! Component: 250  -  total flux cleaned = -3.83383e-05 Jy
! Component: 300  -  total flux cleaned = -0.000176285 Jy
! Component: 350  -  total flux cleaned = -0.000176135 Jy
! Component: 400  -  total flux cleaned = -0.000208374 Jy
! Component: 450  -  total flux cleaned = -0.00027174 Jy
! Component: 500  -  total flux cleaned = -0.000363568 Jy
! Component: 550  -  total flux cleaned = -0.000421768 Jy
! Component: 600  -  total flux cleaned = -0.000421158 Jy
! Component: 650  -  total flux cleaned = -0.000449729 Jy
! Component: 700  -  total flux cleaned = -0.000477547 Jy
! Component: 750  -  total flux cleaned = -0.000504703 Jy
! Component: 800  -  total flux cleaned = -0.000583654 Jy
! Component: 850  -  total flux cleaned = -0.00066031 Jy
! Component: 900  -  total flux cleaned = -0.000685104 Jy
! Component: 950  -  total flux cleaned = -0.000734356 Jy
! Component: 1000  -  total flux cleaned = -0.00071025 Jy
! Component: 1050  -  total flux cleaned = -0.000805835 Jy
! Component: 1100  -  total flux cleaned = -0.00080585 Jy
! Component: 1150  -  total flux cleaned = -0.000897982 Jy
! Component: 1200  -  total flux cleaned = -0.000875455 Jy
! Component: 1250  -  total flux cleaned = -0.000875385 Jy
! Component: 1300  -  total flux cleaned = -0.000875641 Jy
! Component: 1350  -  total flux cleaned = -0.000918734 Jy
! Component: 1400  -  total flux cleaned = -0.000981929 Jy
! Component: 1450  -  total flux cleaned = -0.000960674 Jy
! Component: 1500  -  total flux cleaned = -0.000960154 Jy
! Component: 1550  -  total flux cleaned = -0.000899542 Jy
! Component: 1600  -  total flux cleaned = -0.000919364 Jy
! Component: 1650  -  total flux cleaned = -0.000958367 Jy
! Component: 1700  -  total flux cleaned = -0.000939176 Jy
! Component: 1750  -  total flux cleaned = -0.000958237 Jy
! Component: 1800  -  total flux cleaned = -0.000920612 Jy
! Component: 1850  -  total flux cleaned = -0.000902251 Jy
! Component: 1900  -  total flux cleaned = -0.000866079 Jy
! Component: 1950  -  total flux cleaned = -0.000938432 Jy
! Component: 2000  -  total flux cleaned = -0.00095618 Jy
! Component: 2050  -  total flux cleaned = -0.000903375 Jy
! Component: 2100  -  total flux cleaned = -0.00100807 Jy
! Component: 2150  -  total flux cleaned = -0.00100786 Jy
! Component: 2200  -  total flux cleaned = -0.00102518 Jy
! Component: 2250  -  total flux cleaned = -0.00105884 Jy
! Component: 2300  -  total flux cleaned = -0.00104251 Jy
! Component: 2350  -  total flux cleaned = -0.00110828 Jy
! Component: 2400  -  total flux cleaned = -0.00104328 Jy
! Component: 2450  -  total flux cleaned = -0.00107586 Jy
! Component: 2500  -  total flux cleaned = -0.00110759 Jy
! Component: 2550  -  total flux cleaned = -0.00115473 Jy
! Component: 2600  -  total flux cleaned = -0.0011238 Jy
! Component: 2650  -  total flux cleaned = -0.00116963 Jy
! Component: 2700  -  total flux cleaned = -0.00110852 Jy
! Component: 2750  -  total flux cleaned = -0.00109292 Jy
! Component: 2800  -  total flux cleaned = -0.00100337 Jy
! Component: 2850  -  total flux cleaned = -0.00106246 Jy
! Component: 2900  -  total flux cleaned = -0.00104765 Jy
! Component: 2950  -  total flux cleaned = -0.00101821 Jy
! Component: 3000  -  total flux cleaned = -0.000989371 Jy
! Component: 3050  -  total flux cleaned = -0.00094644 Jy
! Component: 3100  -  total flux cleaned = -0.000917895 Jy
! Component: 3150  -  total flux cleaned = -0.000875973 Jy
! Component: 3200  -  total flux cleaned = -0.000876094 Jy
! Component: 3250  -  total flux cleaned = -0.000875921 Jy
! Component: 3300  -  total flux cleaned = -0.000862247 Jy
! Component: 3350  -  total flux cleaned = -0.000767522 Jy
! Component: 3400  -  total flux cleaned = -0.000727377 Jy
! Component: 3450  -  total flux cleaned = -0.000687582 Jy
! Component: 3500  -  total flux cleaned = -0.00066125 Jy
! Component: 3550  -  total flux cleaned = -0.000648067 Jy
! Component: 3600  -  total flux cleaned = -0.000583045 Jy
! Component: 3650  -  total flux cleaned = -0.000544143 Jy
! Component: 3700  -  total flux cleaned = -0.000544128 Jy
! Component: 3750  -  total flux cleaned = -0.000480458 Jy
! Component: 3800  -  total flux cleaned = -0.000430032 Jy
! Component: 3850  -  total flux cleaned = -0.000467642 Jy
! Component: 3900  -  total flux cleaned = -0.000430356 Jy
! Component: 3950  -  total flux cleaned = -0.000405418 Jy
! Component: 4000  -  total flux cleaned = -0.000380771 Jy
! Component: 4050  -  total flux cleaned = -0.000368524 Jy
! Total flux subtracted in 4096 components = -0.000308041 Jy
! Clean residual min=-0.000724 max=0.000837 Jy/beam
! Clean residual mean=-0.000000 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.209881 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 400 components and 0.209881 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0336-2036_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.985 x 7.649 at -4.603 degrees (North through East)
! Clean map  min=-0.0023958  max=0.13535 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0336-2036_S_map.fits
wmodel /vlbi/uf001/uva//J0336-2036_S_map.mod
! Writing 400 model components to file: /vlbi/uf001/uva//J0336-2036_S_map.mod
wobs   /vlbi/uf001/uva//J0336-2036_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0336-2036_S_uvs.fits
wwins  /vlbi/uf001/uva//J0336-2036_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0336-2036_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.135352 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000209363 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.464041 0.464041 0.928083 1.85617 3.71233 7.42466 14.8493 29.6986 59.3973
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.135 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  646.494 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0336-2036_S_dfm.log closed on Sun Jan 13 21:51:50 2019